 | Up a level |
Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13152543.
Masoud, Fathi and Sapuan, S. M. and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2020) Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12 (6). ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM12061332.
Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. and Dawal, S.Z. (2017) An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. Applied Bionics and Biomechanics, 2017. pp. 1-14. ISSN 1176-2322, DOI https://doi.org/10.1155/2017/7595642.
Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. (2016) An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors. Materials and Manufacturing Processes, 31 (7). pp. 896-904. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2015.1048358.
Tamrin, K.F. and Nukman, Y. and Choudhury, I.A. and Shirley, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166, DOI https://doi.org/10.1016/j.optlaseng.2014.11.001.
Tamrin, K.F. and Nukman, Y. and Sheikh, N.A. (2015) Laser spot welding of thermoplastic and ceramic: An experimental investigation. Materials and Manufacturing Processes.
Tamrin, K.F. and Nukman, Y. and Zakariyah, S.S. (2013) Laser lap joining of dissimilar materials: A review of factors affecting joint strength. Materials and Manufacturing Processes.
Nukman, Y. and Hassan, M.A. and Harizam, M.Z. (2013) Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm. Applied Mathematics & Information Sciences, 7 (1). pp. 363-370. ISSN 1935-0090,
Harizam, M.Z. and Nukman, Y. and Anis, M. and Tamrin, K.F. (2012) Investigation of surface roughness in machining oil palm wood. In: MPOB International Oil Palm Biomass Conference 2012, 20-21 September 2012, Kuala Lumpur, Malaysia. (In Press)
Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61 (5-8). pp. 465-479. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3722-7.
Choudhury, I.A. and Lawal, S.A. and Nukman, Y. (2012) Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768,
Dhakshyani, R. and Nukman, Y. and Azuan, A.N. (2012) FDM models and FEA in dysplastic hip. Rapid Prototyping Journal, 18 (3). pp. 215-221. ISSN 1355-2546, DOI https://doi.org/10.1108/13552541211218144.
Wazed, M.A. and Ahmed, S. and Nukman, Y. and Ale Ebrahim, N. (2012) Models for component commonality in multistage production. Applied Mechanics and Materials, 110-11. pp. 258-266.
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan (2012) Rapid prototyping models for dysplastic hip surgeries in Malaysia. European Journal of Orthopaedic Surgery and Traumatology, 22 (1). pp. 41-46. ISSN 1633-8065, DOI https://doi.org/10.1007/s00590-011-0778-x.
Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58. pp. 19-28. ISSN 0890-6955, DOI https://doi.org/10.1016/j.ijmachtools.2012.02.001.
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2011) Application of Taguchi Method to analyze the impacts of commonality in multistage production under uncertainty. Advanced Science Letters, 4 (2). pp. 415-423. ISSN 1936-6612,
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2011) Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions. European Journal of Industrial Engineering, 5 (2). pp. 215-231. ISSN 1751-5254,
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Vijay, C. (2011) Preliminary report: rapid prototyping models for Dysplastic hip surgery. Central European Journal of Medicine, 6 (3). pp. 266-270. ISSN 1895-1058, DOI https://doi.org/10.2478/s11536-011-0012-6.
Mustafa, Z. and Amin, I. and Nukman, Y. and Haider, N. and Haq, I. (2010) Laser cutting quality control of melamine using artificial neural networks. Asia Pacific Industrial Engineering and Management Systems Conference .
Nukman, Y. and Abu Osman, Noor Azuan and Khairi, S.O. and Harizam, M.Z. (2010) A study on laser cutting of textiles. International Congress on Applications of Lasers & Electro Optics.
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) CETE91 tool condition monitoring using ae signal in turning of ASSAB-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) Tool condition monitoring using ae signal in turning of assab-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak.
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) Analysis of the impacts of common components in multistage production system under uncertain conditions: Application of Taguchi method. Scientific Research and Essays, 5 (24). pp. 3814-3825.
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) Application of Taguchi method to analyze the impacts of commonalities in multistage production under bottleneck and uncertainty. International Journal of the Physical Sciences, 5 (10). pp. 1576-1591. ISSN 1992-1950,
Wazed, M.A. and Nukman, Y. and Islam, M.T. (2010) Design and fabrication of a cost effective solar air heater for Bangladesh. Applied Energy, 87 (10). pp. 3030-3036.
Yusuf, K. and Nukman, Y. and Yusof, T.M. and Dawal, S.Z. and Yang, H.Q. and Mahlia, T.M.I. and Tamrin, K.F. (2010) Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays, 5 (11). pp. 1284-1293.
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) Impacts of quality and processing time uncertainties in multistage production system. International Journal of the Physical Sciences, 5 (6). pp. 814-825. ISSN 1992-1950,
Hambali, A. and Sapuan, S.M. and Ismail, N. and Nukman, Y. (2010) Material selection of polymeric composite automotive bumper beam using analytical hierarchy process. Journal of Central South University of Technology, 17 (2). pp. 244-256.
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Merican, A.M. and George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054, DOI https://doi.org/10.1243/09544054jem1785.
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions. South African Journal of Industrial Engineering, 21 (1). pp. 17-33.
