 | Up a level |
Matsuno, Takashi and Ueda, Yuya and Takahashi, Tomoya and Hama, Takayuki and Hojo, Tomohiko and Shibayama, Yuki and Muhamad, Mohd Ridha and Okitsu, Yoshitaka and Takamura, Masato (2024) Delayed fracture stress thresholds degraded by the shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation. Journal of Manufacturing Processes, 119. pp. 1005-1021. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2024.04.013.
Ibrahim, Farah Arina and Muhamad, Mohd Ridha and Mohd Zubir, Mohd Nashrul and Omar, Mohd and Siri, Zailan and Hasan, Rony Mehedy and Eid, Mohamed Moustafa Abdelhalim Ahmed (2024) Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts. ASME Journal of Heat and Mass Transfer, 146 (6). 061901. ISSN 2832-8450, DOI https://doi.org/10.1115/1.4065115.
Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Mansor, Muhammad Safwan Mohd and Juri, Azib and Wu, Bo and Jamaludin, Mohd Fadzil and Ansari, Nooruddin and Ren, James (2024) Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive. Journal of Materials Research and Technology-JMR&T, 30. pp. 9102-9114. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.05.249.
Mansor, Muhammad Safwan Mohd and Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Manurung, Yupiter HP. and Adenan, Mohd Shahriman and Hussein, Nur Izan Syahriah and Ren, James (2024) Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies. Journal of Materials Research and Technology-JMR&T, 30. pp. 2478-2499. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.03.170.
Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2). e0296871. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.
Wu, Bo and Yusof, Farazila and Li, Fuguo and Miao, Huan and Bushroa, A. R. and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Ibrahim, Mahmoud Z. (2024) Effects of friction stir processing and nano-hydroxyapatite on the microstructure, hardness, degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications. Journal of Magnesium and Alloys, 12 (1). pp. 209-224. ISSN 2213-9567, DOI https://doi.org/10.1016/j.jma.2023.10.010.
Wu, Bo and Yusof, Farazila and Li, Fuguo and Abdul Razak, Bushroa and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ibrahim, Mahmoud Zakaria (2024) Influence of friction stir processing parameters on microstructure, hardness and corrosion resistance of biocompatible Mg alloy WE43. Arabian Journal for Science and Engineering, 49 (2). 1897 – 1911. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-023-08037-8.
Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2 Febr). ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.
Yamani, Seyed Mehrdad and Raja, Sufian and bin Ariffin, Mohammad Ashraf and Mohd Isa, Mohammad Syahid and Muhamad, Mohd Ridha and Jamaludin, Mohd Fadzil and Yusof, Farazila and Hairuddin, Muhammad Khairi Faiz bin Ahmad (2023) Effects of Preheating on Microstructural and Mechanical Properties of Friction Stir Welded Thin Low Carbon Steel Joints. Journal of Engineering Materials And Technology-Transactions Of The ASME, 145 (2). ISSN 0094-4289, DOI https://doi.org/10.1115/1.4055909.
Abdullah, Shekh and Mohd Zubir, Mohd Nashrul Mohd and Muhamad, Mohd Ridha and Newaz, Kazi Md Salim and Oztop, Hakan F. and Alam, Md Shadab and Shaikh, Kaleemullah (2023) Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review. Energy and Buildings, 283. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2023.112805.
Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Suga, Tetsuo and Liu, Huihong and Morisada, Yoshiaki and Fujii, Hidetoshi (2022) Friction stir alloying of AZ61 and mild steel with Al-CNT additive. Science and Technology of Welding and Joining, 27 (7). pp. 533-540. ISSN 1362-1718, DOI 0.1080/13621718.2022.2080449.
Wu, Bo and Ibrahim, Mahmoud Zakaria and Raja, Sufian and Yusof, Farazila and Bushroa, Abdul Razak and Muhamad, Mohd Ridha and Huang, Rongxue and Zhang, Yun and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz (2022) The influence of reinforcement particles friction stir processing on microstructure, mechanical properties, tribological and corrosion behaviors: A review. Journal of Materials Research and Technology-JMR&T, 20. pp. 1940-1975. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.07.172.
Moghadasi, Kaveh and Isa, Mohammad Syahid Mohd and Ariffin, Mohammad Ashraf and Jamil, Muhammad Zulhiqmi Mohd and Raja, Sufian and Wu, Bo and Yamani, Mehrdad and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Ab Karim, Mohd Sayuti and Abdul Razak, Bushroa and Yusoff, Nukman (2022) A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties. Journal of Materials Research and Technology-JMR&T, 17. pp. 1054-1121. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.01.050.
Isa, Mohammad Syahid Mohd and Moghadasi, Kaveh and Ariffin, Mohammad Ashraf and Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Yusoff, Nukman and Ab Karim, Mohd Sayuti (2021) Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review. Journal of Materials Research and Technology-JMR&T, 15. pp. 2735-2780. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.09.037.
Gopalan, Thirumaaran and Mohd Yatim, Rabi'atul `Adawiyah and Muhamad, Mohd Ridha and Mohamed Nazari, Nor Shafina and Hashim, N. Awanis and John, Jacob and Wai Hoe, Victor Chee (2021) Decontamination methods of N95 respirators contaminated with SARS-CoV-2. Sustainability, 13 (22). ISSN 2071-1050, DOI https://doi.org/10.3390/su132212474.
Muhamad, Mohd Ridha and Raja, Sufian and Jamaludin, Mohd Fadzil and Yusof, Farazila and Morisada, Yoshiaki and Suga, Tetsuo and Fujii, Hidetoshi (2021) Enhancements on dissimilar friction stir welding between AZ31 and SPHC mild steel with Al-Mg as powder additives. Journal of Manufacturing Science and Engineering, 143 (7). ISSN 1087-1357, DOI https://doi.org/10.1115/1.4049745.
Raja, Sufian and Muhamad, Mohd Ridha and Jamaludin, Mohd Fadzil and Yusof, Farazila (2020) A review on nanomaterials reinforcement in friction stir welding. Journal of Materials Research and Technology-JMR&T, 9 (6). pp. 16459-16487. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2020.11.072.
Tan, Chin Joo and Ibrahim, Muhammad Shafiq and Muhamad, Mohd Ridha (2019) Preventing delayed cracks in SUS304 deep drawn cups using extreme blank holding forces aided by nanolubrication. The International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1341-1354. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-2772-5.
