Items where Author is "Jamaludin, Mohd Fadzil"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 15.

Article

Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Mansor, Muhammad Safwan Mohd and Juri, Azib and Wu, Bo and Jamaludin, Mohd Fadzil and Ansari, Nooruddin and Ren, James (2024) Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive. Journal of Materials Research and Technology-JMR&T, 30. pp. 9102-9114. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.05.249.

bin Ariffin, Mohammad Ashraf and bin Muhamad, Mohd Ridha and Raja, Sufian and Jamaludin, Mohd Fadzil and Yusof, Farazila and Suga, Tetsuo and Liu, Huihong and Morisada, Yoshiaki and Fujii, Hidetoshi (2022) Friction stir alloying of AZ61 and mild steel with Cu-CNT additive. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 21. pp. 2400-2415. ISSN 2214-0697, DOI https://doi.org/10.1016/j.jmrt.2022.10.082.

Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Suga, Tetsuo and Liu, Huihong and Morisada, Yoshiaki and Fujii, Hidetoshi (2022) Friction stir alloying of AZ61 and mild steel with Al-CNT additive. Science and Technology of Welding and Joining, 27 (7). pp. 533-540. ISSN 1362-1718, DOI 0.1080/13621718.2022.2080449.

Prihandana, Gunawan Setia and Sriani, Tutik and Muthi'ah, Aisyah Dewi and Musa, Siti Nurmaya and Jamaludin, Mohd Fadzil and Mahardika, Muslim (2022) Antibacterial activity of silver nanoflake (SNF)-blended polysulfone ultrafiltration membrane. Polymers, 14 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14173600.

Moghadasi, Kaveh and Isa, Mohammad Syahid Mohd and Ariffin, Mohammad Ashraf and Jamil, Muhammad Zulhiqmi Mohd and Raja, Sufian and Wu, Bo and Yamani, Mehrdad and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Ab Karim, Mohd Sayuti and Abdul Razak, Bushroa and Yusoff, Nukman (2022) A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties. Journal of Materials Research and Technology-JMR&T, 17. pp. 1054-1121. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.01.050.

Prihandana, Gunawan Setia and Sururi, Ahmad and Sriani, Tutik and Yusof, Farazila and Jamaludin, Mohd Fadzil and Mahardika, Muslim (2022) Facile fabrication of low-cost activated carbon bonded polyethersulfone membrane for efficient bacteria and turbidity removal. Water Practice and Technology, 17 (1). 102 -111. ISSN 1751-231X, DOI https://doi.org/10.2166/wpt.2021.116.

Isa, Mohammad Syahid Mohd and Moghadasi, Kaveh and Ariffin, Mohammad Ashraf and Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Yusoff, Nukman and Ab Karim, Mohd Sayuti (2021) Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review. Journal of Materials Research and Technology-JMR&T, 15. pp. 2735-2780. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.09.037.

Zac, C. H. and Abdul Razak, Bushroa and Sarraf, M. and Rizwan, M. and Jamaludin, Mohd Fadzil (2021) Electrophoretic deposition of bioglass reinforced zirconia for biomedical applicationElektrophoretische Abscheidung von mit Bioglas verstarktem Zirkon fur biomedizinische Anwendungen. Materialwissenschaft und Werkstofftechnik, 52 (9). pp. 952-964. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000091.

Muhamad, Mohd Ridha and Raja, Sufian and Jamaludin, Mohd Fadzil and Yusof, Farazila and Morisada, Yoshiaki and Suga, Tetsuo and Fujii, Hidetoshi (2021) Enhancements on dissimilar friction stir welding between AZ31 and SPHC mild steel with Al-Mg as powder additives. Journal of Manufacturing Science and Engineering, 143 (7). ISSN 1087-1357, DOI https://doi.org/10.1115/1.4049745.

Raja, Sufian and Muhamad, Mohd Ridha and Jamaludin, Mohd Fadzil and Yusof, Farazila (2020) A review on nanomaterials reinforcement in friction stir welding. Journal of Materials Research and Technology-JMR&T, 9 (6). pp. 16459-16487. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2020.11.072.

Muhamad, M. R. and Jamaludin, Mohd Fadzil and Yusof, Farazila and Mahmoodian, R. and Morisada, Y. and Suga, T. and Fujii, H. (2020) Effects of Al-Ni powder addition on dissimilar friction stir welding between AA7075-T6 and 304 LAuswirkungen der Al-Ni-Pulverzugabe beim artfremden Ruhrreibschweissen zwischen AA7075-T6 und 304 L. Materialwissenschaft Und Werkstofftechnik, 51 (9). pp. 1274-1284. DOI https://doi.org/10.1002/mawe.201900105.

Poh, Abdul Halim and Jamaludin, Mohd Fadzil and Fadzallah, Iman Aris and Nik Ibrahim, Nik Muhd Jazli and Yusof, Farazila and Adikan, Faisal Rafiq Mahamd and Moghavvemi, Mahmoud (2019) Diffuse reflectance spectroscopic analysis of barium sulfate as a reflection standard within 173–2500 nm: From pure to sintered form. Journal of Near Infrared Spectroscopy, 27 (6). pp. 393-401. ISSN 0967-0335, DOI https://doi.org/10.1177/0967033519868241.

Muhamad, Martini Ridha and Jamaludin, Mohd Fadzil and Sayuti, Mohd and Yusof, Farazila and Zou, Yan Hua (2018) Effects of electrolysis on magnetic abrasive finishing of AA6063-T1 tube internal surface using combination machining tool. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 442-452. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201700266.

Conference or Workshop Item

Nordin, Hilman and Abdul Razak, Bushroa and Mokhtar, Norrima and Jamaludin, Mohd Fadzil (2022) A derivative oriented thresholding approach for feature extraction of mold defects on fine arts painting. In: International Conference on Artificial Life and Robotics.

Sulaiman, Muhammad Rafi and Yusof, Farazila and Jamaludin, Mohd Fadzil (2020) Effect of support structure design on the part built using selective laser melting. In: Advances in Material Sciences and Engineering, 14-15 November 2018, Melaka, Malaysia.

This list was generated on Mon Nov 4 03:17:04 2024 +08.