Items where Author is "Badruddin, Irfan Anjum"

Article

Diblawe, Abdulkadir Mukhtar and Tiu, Zian Cheak and Dimyati, Kaharudin and Apsari, Retna and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Harun, Sulaiman Wadi (2024) Generation of Q-switched and mode-locked pulses in erbium-doped fiber ring laser using saturable absorption of Ti2SnC. Journal of Luminescence, 269. p. 120527. ISSN 0022-2313, DOI https://doi.org/10.1016/j.jlumin.2024.120527.

Chen, Yu and Dimyati, Kaharudin and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Harun, Sulaiman Wadi (2024) All-fiber Q-switched erbium-doped fiber laser generation with SMF-SIMF-SMF structure as artificial saturable absorber. Infrared Physics & Technology, 136. ISSN 1350-4495, DOI https://doi.org/10.1016/j.infrared.2023.105088.

Wu, Bo and Yusof, Farazila and Li, Fuguo and Miao, Huan and Bushroa, A. R. and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Ibrahim, Mahmoud Z. (2024) Effects of friction stir processing and nano-hydroxyapatite on the microstructure, hardness, degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications. Journal of Magnesium and Alloys, 12 (1). pp. 209-224. ISSN 2213-9567, DOI https://doi.org/10.1016/j.jma.2023.10.010.

Tan, Poh Ling and Kanesan, Jeevan and Chuah, Joon Huang and Badruddin, Irfan Anjum and Abdellatif, Abdallah and Kamangar, Sarfaraz and Hussien, Mohamed and Baig, Maughal Ahmed Ali and Ahammad, N. Ameer (2024) Dual therapy of cancer using optimal control supported by swarm intelligence. Bio-Medical Materials and Engineering, 35 (3). pp. 249-264. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-230150.

Wu, Bo and Yusof, Farazila and Li, Fuguo and Abdul Razak, Bushroa and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ibrahim, Mahmoud Zakaria (2024) Influence of friction stir processing parameters on microstructure, hardness and corrosion resistance of biocompatible Mg alloy WE43. Arabian Journal for Science and Engineering, 49 (2). 1897 – 1911. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-023-08037-8.

Samy, Prakas Gopal and Kanesan, Jeevan and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Ahammad, N. Ameer (2024) Optimizing chemotherapy treatment outcomes using metaheuristic optimization algorithms: A case study. Bio-Medical Materials and Engineering, 35 (2). pp. 191-204. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-230149.

Alkawaz, Ali Najem and Kanesan, Jeevan and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Baig, Maughal Ahmed Ali and Ahammad, N. Ameer (2023) Adaptive self-organizing map using optimal control. Mathematics, 11 (9). ISSN 2227-7390, DOI https://doi.org/10.3390/math11091995.

Alkawaz, Ali Najem and Kanesan, Jeevan and Khairuddin, Anis Salwa Mohd and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Baig, Maughal Ahmed Ali and Ahammad, N. Ameer (2023) Training multilayer neural network based on optimal control theory for limited computational resources. Mathematics, 11 (3). ISSN 2227-7390, DOI https://doi.org/10.3390/math11030778.

Latif, Mohd Faruq Abdul and Ghazali, Nik Nazri Nik and Abdullah, M. F. and Ibrahim, Norliza Binti and Razi, Roziana M. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Ahammad, N. Ameer and Khan, Azeem (2023) Modelling the Upper Airways of Mandibular Advancement Surgery: A Systematic Review. Mathematics, 11 (1). ISSN 2227-7390, DOI https://doi.org/10.3390/math11010219.

Athani, Abdulgaphur and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Ahmed, N. J. Salman and Honnutagi, Abdulrazak (2023) Visualization of multiphase pulsatile blood over single phase blood flow in a patient specific stenosed left coronary artery using image processing technique. Bio-Medical Materials and Engineering, 34 (1). pp. 13-35. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-211333.

Naseer, Muhammad Nihal and Noorollahi, Younes and Zaidi, Asad A. and Abdul Wahab, Yasmin and Johan, Mohd Rafie and Badruddin, Irfan Anjum (2022) Abandoned wells multigeneration system: Promising zero CO2 emission geothermal energy system. International Journal of Energy and Environmental Engineering, 13 (4). 1237 -1246. ISSN 2008-9163, DOI https://doi.org/10.1007/s40095-022-00496-3.

Uppin, Vinayak S. and Gouda, P. S. Shivakumar and Kittur, M. I. and Andriyana, Andri and Ang, Bee Chin and Parveez, Bisma and Badruddin, Irfan Anjum and Javed, Syed and Kamangar, Sarfaraz (2022) Mechanical Response of Glass-Epoxy Composites with Graphene Oxide Nanoparticles. MATERIALS, 15 (23). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15238545.

Equbal, Azhar and Equbal, Md Asif and Equbal, Md Israr and Ravindrannair, Pranav and Khan, Zahid A. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Tirth, Vineet and Javed, Syed and Kittur, M. (2022) Evaluating CNC milling performance for machining AISI 316 stainless steel with carbide cutting tool insert. MATERIAL, 15 (22). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15228051.

Muzhaimey, Syarif Syahrul Syazwan and Ghazali, Nik Nazri Nik and Zainon, Mohd Zamri and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ahammad, N. Ameer (2022) Numerical investigation of heat transfer enhancement in a microchannel with conical-shaped reentrant cavity. Mathematics, 10 (22). ISSN 2227-7390, DOI https://doi.org/10.3390/math10224330.

Parveez, Bisma and Kittur, Mohammed Ibrahim and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Umarfarooq, M. A. (2022) Scientific advancements in composite materials for aircraft applications: A review. Polymers, 14 (22). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14225007.

Shah, Syed Tawab and Chowdhury, Zaira Zaman and Simarani, Khanom and Basirun, Wan Jefrey and Badruddin, Irfan Anjum and Hussien, Mohamed and Alrobei, Hussein and Kamangar, Sarfaraz (2022) Nanoantioxidants: The fourth generation of antioxidants-recent research roadmap and future perspectives. Coatings, 12 (10). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings12101568.

Umarfarooq, M. A. and Gouda, P. S. Shivakumar and Banapurmath, N. R. and Kittur, Mohammed Ibrahim and Khan, Tabrej and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed (2022) On the residual stresses and fracture toughness of glass/carbon epoxy composites. Materials, 15 (20). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15207135.

Wu, Bo and Ibrahim, Mahmoud Zakaria and Raja, Sufian and Yusof, Farazila and Bushroa, Abdul Razak and Muhamad, Mohd Ridha and Huang, Rongxue and Zhang, Yun and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz (2022) The influence of reinforcement particles friction stir processing on microstructure, mechanical properties, tribological and corrosion behaviors: A review. Journal of Materials Research and Technology-JMR&T, 20. pp. 1940-1975. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.07.172.

Salami, Erfan and Montazer, Elham and Ward, Thomas A. and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum (2022) Aerodynamic performance of a dragonfly-inspired tandem wing system for a biomimetic micro air vehicle. Frontiers in Bioengineering And Biotechnology, 10. ISSN 2296-4185, DOI https://doi.org/10.3389/fbioe.2022.787220.

Shah, Syed Tawab and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Alrobei, Hussein and Kamangar, Sarfaraz (2022) Design and synthesis of multipotent antioxidants for functionalization of iron oxide nanoparticles. Coatings, 12 (4). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings12040517.

Shah, Syed Tawab and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Khaleed, H. M. T. and Kamangar, Sarfaraz and Alrobei, Hussein (2022) Surface functionalization of magnetite nanoparticles with multipotent antioxidant as potential magnetic nanoantioxidants and antimicrobial agents. Molecules, 27 (3). ISSN 1420-3049, DOI https://doi.org/10.3390/molecules27030789.

Soudagar, Manzoore Elahi M. and Afzal, Asif and Safaei, Mohammad Reza and Manokar, A. Muthu and EL-Seesy, Ahmed and Mujtaba, M. A. and Samuel, Olusegun David and Badruddin, Irfan Anjum and Ahmed, Waqar and Shahpurkar, Kiran and Goodarzi, Marjan (2022) Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics. Journal of Thermal Analysis and Calorimetry, 147 (1). pp. 525-542. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10293-x.

Athani, Abdulgaphur and Ghazali, Nik Nazri Nik and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Anqi, Ali E. and Algahtani, Ali (2022) Investigation of two-way fluid-structure interaction of blood flow in a patient-specific left coronary artery. Bio-Medical Materials and Engineering, 33 (1). pp. 13-30. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-201171.

Sunil, Kumar S and Londe, Neelakantha V and Dilip, Kumar K and Kittur, M.I. and Badruddin, Irfan Anjum and Faheem, Mohammed and Khan, Sher Afghan (2022) On mechanical response of aluminum alloys in corrosive environment. International Journal of Integrated Engineering, 14 (1). 48 – 56. ISSN 2229-838X, DOI https://doi.org/10.30880/ijie.2022.14.01.005.

Athani, Abdulgaphur and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Usmani, Abdullah Y. and Kamangar, Sarfaraz and Anqi, Ali E. and Ahammad, Nandalur Ameer (2021) Two-phase non-newtonian pulsatile blood flow simulations in a rigid and flexible patient-specific Left Coronary Artery (LCA) exhibiting multi-stenosis. Applied Sciences-Basel, 11 (23). ISSN 2076-3417, DOI https://doi.org/10.3390/app112311361.

Bashir, Mohamed Bashir Ali and Salih, Ethar Yahya and Mohd Sabri, Mohd Faizul and Rajpar, Altaf Hussain and Badruddin, Irfan Anjum and Hussein, Mohd Zobir and Al-Jumaili, Batool Eneaze (2021) In-depth thermal, microstructural and photoluminescence analysis of mesoporous ZnO/ZnAl2o4-MMO: The effect of molar ratio. ECS Journal of Solid State Science and Technology, 10 (10). ISSN 2162-8769, DOI https://doi.org/10.1149/2162-8777/ac2b3b.

Oon, C. S. and Kazi Md., Salim Newaz and Zubir, Mohd Nashrul Mohd and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Heah, C. Y. and Alnaimat, Fadi and Mathew, Boby and Husain, A. (2021) Fouling and fouling mitigation of mineral salt using bio-based functionalized graphene nano-plates. Journal of Thermal Analysis and Calorimetry, 146 (1). pp. 265-275. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-09940-0.

Naseer, Muhammad Nihal and Zaidi, Asad A. and Khan, Hamdullah and Kumar, Sagar and bin Owais, Muhammad Taha and Abdul Wahab, Yasmin and Dutta, Kingshuk and Jaafar, Juhana and Hamizi, Nor Aliya and Islam, Mohammad Aminul and Hussin, Hanim and Badruddin, Irfan Anjum and Alrobei, Hussein (2021) Statistical modeling and performance optimization of a two-chamber microbial fuel cell by response surface methodology. Catalysts, 11 (10). ISSN 2073-4344, DOI https://doi.org/10.3390/catal11101202.

Khan, T. M. Yunus and Badruddin, Irfan Anjum and Soudagar, Manzoore Elahi M. and Khandal, Sanjeev and Kamangar, Sarfaraz and Mokashi, Imran and Mujtaba, M. A. and Hossain, Nazia (2021) Biodiesel production using modified direct transesterification by sequential use of acid-base catalysis and performance evaluation of diesel engine using various blends. Sustainability, 13 (17). ISSN 2071-1050, DOI https://doi.org/10.3390/su13179731.

Saat, Asmalina Mohamed and Kamil, Md Salim and Hamizi, Nor Aliya and Badruddin, Irfan Anjum and Ghazali, Nadiah and Sagadevan, Suresh and Kamangar, Sarfaraz and Khan, T. M. Yunus and Johan, Mohd Rafie (2021) Influence of reaction pH towards the physicochemical characteristics of phosphorylated polyvinyl alcohol-aluminum phosphate nanocomposite. Coatings, 11 (9). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings11091105.

Shahapurkar, Kiran and Chenrayan, Venkatesh and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Shahapurkar, Pavan and Elfasakhany, Ashraf and Mujtaba, Muhammad Abbas and Siddiqui, Md Irfanul Haque and Ali, Masood Ashraf and Mahlia, Teuku Meurah Indra (2021) Leverage of environmental pollutant crump rubber on the dry sliding wear response of epoxy composites. Polymers, 13 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13172894.

Ahmed, Waqar and Chowdhury, Zaira Zaman and Kazi, Salim Newaz and Bin Johan, Mohd Rafie and Abdelrazek, Ali H. and Fayaz, H. and Badruddin, Irfan Anjum and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Akram, Naveed and Mehmood, Shahid and Ahmad, Muhammad Shakeel and Kamangar, Sarfaraz and Khan, T. M. Yunus (2021) Experimental evaluation and numerical verification of enhanced heat transportation by using ultrasonic assisted nanofluids in a closed horizontal circular passage. Case Studies in Thermal Engineering, 26. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101026.

AbdRabbuh, O. Almatar and Oon, C. S. and Kazi, S. N. and Abdelrazek, A. H. and Ahmed, Wasiar and Mallah, A. R. and Badarudin, A. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz (2021) An experimental investigation of eco-friendly treated GNP heat transfer growth: circular and square conduit comparison. Journal of Thermal Analysis and Calorimetry, 145 (1). pp. 139-151. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-09652-5.

Akkoli, K. M. and Banapurmath, N. R. and Shivashimpi, M. M. and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Alazwari, Mashhour A. and Yaliwal, V. S. and Mujtaba, M. A. and Akram, Naveed and Goodarzi, Marjan and Safaei, Mohammad Reza and Venu, Harish (2021) Effect of injection parameters and producer gas derived from redgram stalk on the performance and emission characteristics of a diesel engine. Alexandria Engineering Journal, 60 (3). pp. 3133-3142. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.01.047.

Ahmed, Waqar and Zaman Chowdhury, Zaira and Kazi, Salim Newaz and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Soudagar, Manzoore Elahi M. and Kamangar, Sarfaraz and Mujtaba, Muhammad Abbas and Gul, Mustabshirha and Khan, T. M. Yunus (2021) Evaluation on enhanced heat transfer using sonochemically synthesized stable zno-eg@dw nanofluids in horizontal calibrated circular flow passage. Energies, 14 (9). ISSN 1996-1073, DOI https://doi.org/10.3390/en14092400.

Saleel, Ahamcd C. and Afzal, Asif and Badruddin, Irfan Anjum and Khan, T. M. Yunus and Kamangar, Sarfaraz and Abdelmohimen, Mostafa and Soudagar, Manzoore Elahi M. and Fayaz, H. (2021) Numerical investigation on pressure-driven electro osmatic flow and mixing in a constricted micro channel by triangular obstacle. International Journal of Numerical Methods for Heat & Fluid Flow, 31 (3). pp. 982-1013. ISSN 0961-5539, DOI https://doi.org/10.1108/HFF-06-2020-0349.

Yusof, Yusliza and Moosavi, Seyedehmaryam and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Abdul Wahab, Yasmin and Hamizi, Nor Aliya and Ab Rahman, Marlinda and Kamangar, Sarfaraz and Khan, T. M. Yunus (2021) Electromagnetic characterization of a multiwalled carbon nanotubes-silver nanoparticles-reinforced polyvinyl alcohol hybrid nanocomposite in x-band frequency. ACS Omega, 6 (6). pp. 4184-4191. ISSN 2470-1343, DOI https://doi.org/10.1021/acsomega.0c04864.

Akinpelu, Adeola A. and Chowdhury, Zaira Zaman and Shibly, Shahjalal Mohd. and Faisal, Abu Nasser Mohd and Badruddin, Irfan Anjum and Rahman, Md. Mahfujur and Al Amin, Md. and Sagadevan, Suresh and Akbarzadeh, Omid and Khan, T. M. Yunus and Kamangar, Sarfaraz and Khalid, Khalisanni and Saidur, R. and Johan, Mohd Rafie (2021) Adsorption studies of volatile organic compound (naphthalene) from aqueous effluents: Chemical activation process using weak Lewis acid, equilibrium kinetics and isotherm modelling. International Journal of Molecular Sciences, 22 (4). ISSN 1661-6596, DOI https://doi.org/10.3390/ijms22042090.

Ali, Muhammad Shujaat and Anwar, Zahid and Mujtaba, Muhammad Abbas and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Safaei, Mohammad Reza and Iqbal, Asim and Afzal, Asif and Razzaq, Luqman and Khidmatgar, Abdulqhadar and Goodarzi, Marjan (2021) Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels. Case Studies in Thermal Engineering, 23. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2020.100824.

Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Safaei, Mohammad Reza and Afzal, Asif and Raju, Dhana and Ahmed, Waqar and Banapurmath, N. R. and Hossain, Nazia and Bashir, Shahid and Badruddin, Irfan Anjum and Goodarzi, Marjan and Shahapurkar, Kiran and Taqui, Syed Noeman (2021) Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics. Energy, 215 (A). ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2020.119094.

Liu, Bo and Wang, Chunyu and Bazri, Shahab and Badruddin, Irfan Anjum and Orooji, Yasin and Saeidi, Samrand and Wongwises, Somchai and Mahian, Omid (2021) Optical properties and thermal stability evaluation of solar absorbers enhanced by nanostructured selective coating films. Powder Technology, 377. pp. 939-957. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2020.09.040.

Ahmed, Waqar and Kazi, S. N. and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Gul, M. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz (2021) Ultrasonic assisted new Al2O3@TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage. International Communications in Heat and Mass Transfer, 120. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.105018.

Faizal, W. M. and Ghazali, Nik Nazri Nik and Khor, C. Y. and Zainon, Mohd Zamri and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Ibrahim, Norliza Binti and Razi, Roziana Mohd (2021) Computational analysis of airflow in upper airway under light and heavy breathing conditions for a realistic patient having obstructive sleep apnea. CMES-Computer Modeling in Engineering & Sciences, 128 (2). pp. 583-604. ISSN 1526-1492, DOI https://doi.org/10.32604/cmes.2021.015549.

Mohd Zahri, Nur Amirah and Yusof, Farazila and Badruddin, Irfan Anjum and Haseeb, A. S. Md. Abdul and Sukiman, Nazatul Liana and Kamangar, Sarfaraz (2021) Deformation and fracture behavior of sandwiched copper foam brazed joint using amorphous copper-tin-nickel-phosphorus filler. Frontiers in Materials, 8. ISSN 2296-8016, DOI https://doi.org/10.3389/fmats.2021.665219.

Yusof, Yusliza and Moosavi, Seyedehmaryam and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Wahab, Yasmin Abdul and Hamizi, Nor Aliya and Rahman, Marlinda Ab and Kamangar, Sarfaraz and Khan, T.M. Yunus (2021) Electromagnetic Characterization of a Multiwalled Carbon Nanotubes–Silver Nanoparticles-Reinforced Polyvinyl Alcohol Hybrid Nanocomposite in X-Band Frequency. ACS Omega, 6 (6). pp. 4184-4191. ISSN 2470-1343, DOI https://doi.org/10.1021/acsomega.0c04864.

Faizal, W. M. and Ghazali, N. N. N. and Khor, C. Y. and Badruddin, Irfan Anjum and Zainon, Mohd Zamri and Ahmad Yazid, Aznijar and Ibrahim, Norliza Binti and Razi, Roziana Mohd (2020) Computational fluid dynamics modelling of human upper airway: A review. Computer Methods and Programs in Biomedicine, 196. ISSN 0169-2607, DOI https://doi.org/10.1016/j.cmpb.2020.105627.

Hussain, Fayaz and Soudagar, Manzoore Elahi M. and Afzal, Asif and Mujtaba, M. A. and Fattah, I. M. Rizwanul and Naik, Bharat and Mulla, Mohammed Huzaifa and Badruddin, Irfan Anjum and Khan, T. M. Yunus and Raju, Vallapudi Dhana and Gavhane, Rakhamaji S. and Rahman, S. M. Ashrafur (2020) Enhancement in Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Ce-ZnO Nanoparticle Additive Added to Soybean Biodiesel Blends. ENERGIES, 13 (17). ISSN 19961073, DOI https://doi.org/10.3390/en13174578.

Siddiqi, Muhammad Mobin and Naseer, Muhammad Nihal and Abdul Wahab, Yasmin and Hamizi, Nor Aliya and Badruddin, Irfan Anjum and Abul Hasan, Mohd and Chowdhury, Zaira Zaman and Akbarzadeh, Omid and Johan, Mohd Rafie and Kamangar, Sarfaraz (2020) Exploring E-Waste Resources Recovery in Household Solid Waste Recycling. Processes, 8 (9). ISSN 22279717, DOI https://doi.org/10.3390/pr8091047.

Equbal, Azhar and Shamim, Mohammad and Badruddin, Irfan Anjum and Equbal, Israr and Sood, Anoop Kumar and Ghazali, Nik Nazri Nik and Khan, Zahid A. (2020) Application of the combined ANN and GA for multi-response optimization of cutting parameters for the turning of glass fiber-reinforced polymer composites. Mathematics, 8 (6). ISSN 2227-7390, DOI https://doi.org/10.3390/MATH8060947.

Gavhane, Rakhamaji S. and Kate, Ajit M. and Pawar, Abhay and Safaei, Mohammad Reza and Soudagar, Manzoore Elahi M. and Abbas, Muhammad Mujtaba and Ali, Hafiz Muhammad and Banapurmath, Nagaraj R. and Goodarzi, Marjan and Badruddin, Irfan Anjum and Ahmed, Waqar and Shahapurkar, Kiran (2020) Effect of zinc oxide Nano-additives and soybean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics. Symmetry-Basel, 12 (6). ISSN 20738994,

Yang, Liu and Jiang, Weixue and Ji, Weikai and Mahian, Omid and Bazri, Shahab and Sadri, Rad and Badruddin, Irfan Anjum and Wongwises, Somchai (2020) A review of heating/cooling processes using nanomaterials suspended in refrigerants and lubricants. International Journal of Heat and Mass Transfer, 153. ISSN 00179310,

Bashir, Mohamed Bashir Ali and Sabri, Mohd Faizul Mohd and Said, Suhana Mohd and Miyazaki, Yuzuru and Badruddin, Irfan Anjum and Shnawah, Dhafer Abdul Ameer and Salih, Ethar Yahya and Abushousha, Sabir and Elsheikh, Mohamed Hamid (2020) Enhancement of thermoelectric properties of Co4Sb12 Skutterudite by Al and La double filling. Journal of Solid State Chemistry, 284. ISSN 0022-4596, DOI https://doi.org/10.1016/j.jssc.2020.121205.

Soudagar, Manzoore Elahi M. and Ghazali, Nik Nazri Nik and Kalam, Md. Abul and Badruddin, Irfan Anjum and Banapurmath, Nagaraj R. and Ali, Mohamad Azlin and Kamangar, Sarfaraz and Cho, Haeng Muk and Akram, Naveed (2020) An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics. Renewable Energy, 146. pp. 2291-2307. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2019.08.025.

Siddiqi, Muhammad Mobin and Naseer, Muhammad Nihal and Wahab, Yasmin Abdul and Hamizi, Nor Aliya and Badruddin, Irfan Anjum and Chowdhury, Zaira Zaman and Akbarzadeh, Omid and Johan, Mohd Rafie and Khan, T.M. Yunus and Kamangar, Sarfaraz (2019) Evaluation of Municipal Solid Wastes Based Energy Potential in Urban Pakistan. Processes, 7 (11). p. 848. ISSN 2227-9717, DOI https://doi.org/10.3390/pr7110848.

Kamangar, Sarfaraz and Khan, Mohammad Anas and Badruddin, Irfan Anjum and Yunus Khan, T.M. and Nik-Ghazali, Nik Nazri (2019) Numerical analysis of heat transfer in human head. Journal of Mechanical Science and Technology, 33 (7). pp. 3597-3605. ISSN 1738-494X, DOI https://doi.org/10.1007/s12206-019-0654-x.

Mohd Yasin, Siti Mariah and Badruddin, Irfan Anjum and Johan, Mohd Rafie (2019) Super Stability of Ag Nanoparticle in Crystalline Lamellar (Lc) Liquid Crystal Matrix at Different pH Environment. Symmetry, 12 (1). p. 31. ISSN 2073-8994, DOI https://doi.org/10.3390/SYM12010031.

Soudagar, Manzoore Elahi M. and Nik-Ghazali, Nik Nazri and Kalam, Md. Abul and Badruddin, Irfan Anjum and Banapurmath, N.R. and Yunus Khan, T.M. and Bashir, Muhammad Nasir and Akram, Naveed and Farade, Rijavan and Afzal, Asif (2019) The effects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics. Fuel, 257. p. 116015. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2019.116015.

Yunus Khan, T.M. and Badruddin, Irfan Anjum and Ankalgi, R.F. and Badarudin, Ahmad and Hungund, B.S. and Ankalgi, Fazal R. (2018) Biodiesel Production by Direct Transesterification Process via Sequential Use of Acid–Base Catalysis. Arabian Journal for Science and Engineering, 43 (11). pp. 5929-5936. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-018-3078-5.

Yong, K.W. and Ganesan, Poo Balan and Kazi, Md Salim Newaz and Ramesh, Sathyadeepak and Badruddin, Irfan Anjum and Mubarak, Nabisab Mujawar (2018) Sliding behavior of droplet on a hydrophobic surface with hydrophilic cavities: A simulation study. Physics of Fluids, 30 (12). p. 122006. ISSN 1070-6631, DOI https://doi.org/10.1063/1.5063857.

Bazri, Shahab and Badruddin, Irfan Anjum and Naghavi, Mohammad Sajad and Bahiraei, Mehdi (2018) A review of numerical studies on solar collectors integrated with latent heat storage systems employing fins or nanoparticles. Renewable Energy, 118. pp. 761-778. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2017.11.030.

Azeem, - and Badruddin, Irfan Anjum and Idris, Mohd Yamani Idna and Nik-Ghazali, Nik Nazri and Salman Ahmed, N.J. and Al-Rashed, A.A.A.A. (2016) Conjugate heat and mass transfer in square porous cavity. Indian Journal of Pure and Applied Physics, 54 (12). pp. 777-786. ISSN 0019-5596,

Atabani, A.E. and Badruddin, Irfan Anjum and Mekhilef, Saad and Silitonga, A.S. (2011) A review on global fuel economy standards, labels and technologies in the transportation sector. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4586-4610. ISSN 1364-0321, DOI doi:/10.1016/j.rser.2011.07.092.