Items where Author is "Alengaram, Ubagaram Johnson"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 64.

Article

Kanagaraj, Balamurali and Anand, N. and Alengaram, Ubagaram Johnson and Raj, R. Samuvel and Praveen, Bushra and Tattukolla, Kiran (2022) Performance evaluation on engineering properties and sustainability analysis of high strength geopolymer concrete. Journal of Building Engineering, 60. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2022.105147.

Alnahhal, Ahmed Mahmoud and Alengaram, Ubagaram Johnson and Ibrahim, Muhammad Shazril Idris and Yusoff, Sumiani and Metselaar, Hendrik Simon Cornelis and Johnson, Petrina Gabriela (2022) Synthesis of ternary binders and sand-binder ratio on the mechanical and microstructural properties of geopolymer foamed concrete. Construction and Building Materials, 349. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128682.

Abbas, M. K. G. and Kuldip Singh, Ramesh Singh. and Lee, K. Y. Sara and Wong, Y. H. and Tan, Chou Yong and Alengaram, Ubagaram Johnson and Ganesan, P. and Musharavati, Farayi and Zalnezhad, Erfan (2022) Densification of copper oxide doped alumina toughened zirconia by conventional sintering. Ceramics International, 48 (5). pp. 6287-6293. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.11.171.

Alnahhal, Ahmed Mahmoud and Alengaram, Ubagaram Johnson and Yusoff, Sumiani and Darvish, Pouya Hassan and Srinivas, Karthick and Sumesh, M. (2022) Engineering performance of sustainable geopolymer foamed and non-foamed concretes. Construction and Building Materials, 316. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125601.

Kiran, Tattukolla and Mathews, Mervin Ealiyas and N, Anand and Alengaram, Ubagaram Johnson and Andrushia, A Diana (2022) Influence of mineral admixtures on the residual mechanical properties and durability characteristics of self-compacting concrete subjected to high temperature. Australian Journal of Civil Engineering, 20 (2). 244 – 260. ISSN 1448-8353, DOI https://doi.org/10.1080/14488353.2021.1953682.

Haddadian, Arian and Alengaram, Ubagaram Johnson and Alnahhal, Ahmed Mahmoud and Salari, Farhang and Srinivas, M. Karthick and Mo, Kim Hung and Yusoff, Sumiani and Ibrahim, Muhammad Shazril Idris (2022) Valorization of diverse sizes of coal bottom ash as fine aggregate in the performance of lightweight foamed concrete. Journal of Civil Engineering and Management, 28 (8). pp. 601-619. ISSN 1392-3730, DOI https://doi.org/10.3846/jcem.2022.16995.

Srinivas, Karthick M. and Alengaram, Ubagaram Johnson and Ibrahim, Shaliza and Phang, Siew Moi and Vello, Vejeysri and Jun, Hew Kai and Alnahhal, Ahmed Mahmoud (2021) Evaluation of crack healing potential of cement mortar incorporated with blue-green microalgae. Journal of Building Engineering, 44. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2021.102958.

Hassandarvish, Pouya and Alengaram, Ubagaram Johnson and Alnahhal, Ahmed Mahmoud and Poh, Yap Soon and Ibrahim, Shaliza (2021) Enunciation of size effect of sustainable palm oil clinker sand on the characteristics of cement and geopolymer mortars. Journal of Building Engineering, 44. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2021.103335.

Obaydullah, M. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Kabir, Md Humayun and Rashid, Muhammad Harunur (2021) Strengthening of prestressed concrete beams using prestressed NSM CFRP bars to enhance structural performance. Jordan Journal of Civil Engineering, 15 (2). pp. 318-328. ISSN 1993-0461,

Deboucha, Walid and Leklou, Nordine and Khelidj, Abdelhafid and Ple, Olivier and Alengaram, Ubagaram Johnson (2020) Combination effect of limestone filler and slag on delayed ettringite formation in heat-cured mortar. Journal of Materials in Civil Engineering, 32 (3). ISSN 0899-1561, DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0003020.

Shukri, Ahmad Azim and Shamsudin, Mohd Fazaulnizam and Ibrahim, Zainah and Alengaram, Ubagaram Johnson (2020) Parametric study for concrete cover separation failure of retrofitted SNSM strengthened RC beams. Mechanics of Advanced Materials and Structures, 27 (6). pp. 481-492. ISSN 1537-6494, DOI https://doi.org/10.1080/15376494.2018.1482034.

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Mo, Kim Hung and Jumaat, Mohd Zamin (2019) Ductility behaviours of oil palm shell steel fibre-reinforced concrete beams under flexural loading. European Journal of Environmental and Civil Engineering, 23 (7). pp. 866-878. ISSN 2116-7214, DOI https://doi.org/10.1080/19648189.2017.1320234.

Safarzadeh, Marjan and Ramesh, Singh and Tan, Chou Yong and Chandran, Hari and Noor, Ahmad Fauzi Mohd and Krishnasamy, Sivakumar and Alengaram, Ubagaram Johnson and Ramesh, Subramaniam (2019) Effect of multi-ions doping on the properties of carbonated hydroxyapatite bioceramic. Ceramics International, 45 (3). pp. 3473-3477. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.11.003.

Varghese, Alwyn and Anand, N. and Arulraj, G. Prince and Alengaram, Ubagaram Johnson (2019) Influence of fibers on bond strength of concrete exposed to elevated temperature. Journal of Adhesion Science and Technology, 33 (14). pp. 1521-1543. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2019.1602889.

Sumesh, Mathialagan and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung (2019) Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials. Journal of Materials in Civil Engineering, 31 (4). 04019017. ISSN 0899-1561, DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0002626.

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Ganasan, Reventheran (2019) Performance evaluation of masonry grout containing high volume of palm oil industry by-products. Journal of Cleaner Production, 220. pp. 1202-1214. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2019.02.134.

Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Abutaha, Fuad and Alqedra, Mamoun A. and Nayaka, Ramappa Ramesh (2018) Assessment on engineering properties and CO2 emissions of recycled aggregate concrete incorporating waste products as supplements to Portland cement. Journal of Cleaner Production, 203. pp. 822-835. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.08.292.

Mo, Kim Hung and Loh, Zhi Pin and Tan, Chee Ghuan and Alengaram, Ubagaram Johnson and Yap, Soon Poh (2018) Behaviour of fibre-reinforced cementitious composite containing high-volume fly ash at elevated temperatures. Sadhana, 43 (11). p. 177. ISSN 0256-2499, DOI https://doi.org/10.1007/s12046-018-0937-4.

Mo, Kim Hung and Yeap, Kee Wei and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, Iftekhair Ibnul (2018) Bond strength evaluation of palm oil fuel ash-based geopolymer normal weight and lightweight concretes with steel reinforcement. Journal of Adhesion Science and Technology, 32 (1). pp. 19-35. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2017.1336195.

Hosen, Md Akter and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ramli Sulong, Nor Hafizah (2018) CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique. Construction and Building Materials, 165. pp. 28-44. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.052.

Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alsubari, Belal and Alqedra, Mamoun A. and Mo, Kim Hung (2018) Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials. Construction and Building Materials, 163. pp. 482-495. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.106.

Ramesh, Singh and Sara Lee, K.Y. and Tan, Chou Yong and Wong, Yew Hoong and Alengaram, Ubagaram Johnson and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sutharsini, U. and Sarhan, Ahmed Aly Diaa Mohammed (2018) Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics. Ceramics International, 44 (16). pp. 19639-19645. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.07.215.

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Alnahhal, Mohammed Fouad (2018) High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar. Journal of Cleaner Production, 190. pp. 272-284. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.03.291.

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani (2018) Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. Construction and Building Materials, 189. pp. 906-923. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.09.020.

Mo, Kim Hung and Mohd Anor, Fatin Amirah and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Rao, K. Jagannadha (2018) Properties of metakaolin-blended oil palm shell lightweight concrete. European Journal of Environmental and Civil Engineering, 22 (7). pp. 852-868. ISSN 2116-7214, DOI https://doi.org/10.1080/19648189.2016.1229222.

Shukri, Ahmad Azim and Shamsudin, Mohd Fazaulnizam and Ibrahim, Zainah and Alengaram, Ubagaram Johnson and Hashim, Huzaifa (2018) Simulating Intermediate Crack Debonding on RC Beams Strengthened with Hybrid Methods. Latin American Journal of Solids and Structures, 15 (9). e78. ISSN 1679-7817, DOI https://doi.org/10.1590/1679-78254948.

Ong, Seng Kuan and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Ling, Tung Chai (2018) Valorization of Wastes from Power Plant, Steel-Making and Palm Oil Industries as Partial Sand Substitute in Concrete. Waste and Biomass Valorization, 9 (9). pp. 1645-1654. ISSN 1877-2641, DOI https://doi.org/10.1007/s12649-017-9937-6.

Alnahhal, M.F. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alqedra, M.A. and Mo, Kim Hung and Sumesh, M. (2017) Evaluation of Industrial By-Products as Sustainable Pozzolanic Materials in Recycled Aggregate Concrete. Sustainability, 9 (5). p. 767. ISSN 2071-1050, DOI https://doi.org/10.3390/su9050767.

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Mo, Kim Hung and Jumaat, Mohd Zamin (2017) High strength oil palm shell concrete beams reinforced with steel fibres. Materiales de Construcción, 67 (328). p. 142. ISSN 0465-2746, DOI https://doi.org/10.3989/mc.2017.11616.

Sumesh, M. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung and Alnahhal, M.F. (2017) Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. Construction and Building Materials, 148. pp. 62-84. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.04.206.

Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Sharmin, A. and Bashar, I.I. (2017) Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete. Journal of Cleaner Production, 161. pp. 477-492. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.05.002.

Mo, Kim Hung and Yeoh, K.H. and Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2017) Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete. Construction and Building Materials, 148. pp. 369-375. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.05.017.

Mo, Kim Hung and Visintin, P. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Bond stress-slip relationship of oil palm shell lightweight concrete. Engineering Structures, 127. pp. 319-330. ISSN 0141-0296, DOI https://doi.org/10.1016/j.engstruct.2016.08.064.

Ul Islam, M.M. and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Durability properties of sustainable concrete containing high volume palm oil waste materials. Journal of Cleaner Production, 137. pp. 167-177. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.061.

Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Islam, A. and Santhi, H. and Sharmin, A. (2016) Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111. pp. 280-297. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.02.022.

Shafigh, Payam and Nomeli, M.A. and Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2016) Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash. Journal of Cleaner Production, 135. pp. 148-157. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.06.082.

Ranjbar, N. and Behnia, A. and Chai, H.K. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. Construction and Building Materials, 127. pp. 274-283. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.09.144.

Ahmmad, R. and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Bahri, S. and Rehman, M.A. and Hashim, H. (2016) Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112 (Part 1). pp. 566-574. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.08.043.

Obaydullah, M. and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Darain, K.M.U. and Huda, M.N. and Hosen, M.A. (2016) Prestressing of NSM steel strands to enhance the structural performance of prestressed concrete beams. Construction and Building Materials, 129. pp. 289-301. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.10.077.

Alengaram, Ubagaram Johnson and Mohottige, N.H.W. and Wu, C. and Jumaat, Mohd Zamin and Yap, Soon Poh and Wang, Z. (2016) Response of oil palm shell concrete slabs subjected to quasi-static and blast loads. Construction and Building Materials, 116. pp. 391-402. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.04.103.

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, K.R. (2016) Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete. Journal of Composite Materials, 50 (1). pp. 115-128. ISSN 0021-9983, DOI https://doi.org/10.1177/0021998315571431.

Mo, K.H. and Alengaram, Ubagaram Johnson and Visintin, P. and Goh, S.H. and Jumaat, Mohd Zamin (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.03.040.

Mo, K.H. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.12.021.

Foong, K.Y. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University Science A, 16 (1). pp. 59-69. ISSN 1673-565X, DOI https://doi.org/10.1631/jzus.A1400175.

Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101 (pt.1). pp. 942-951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.104.

Yap, Soon Poh and Khaw, K.R. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2015) Effect of fibre aspect ratio on the torsional behaviour of steel fibre-reinforced normal weight concrete and lightweight concrete. Engineering Structures, 101. pp. 24-33. ISSN 0141-0296, DOI https://doi.org/10.1016/j.engstruct.2015.07.007.

Islam, A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, I.I. and Kabir, S.M.A. (2015) Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete. Construction and Building Materials, 101 (1). pp. 503-521. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.026.

Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/647071.

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, Kuan Ren (2015) Torsional behaviour of steel fibre-reinforced oil palm shell concrete beams. Materials & Design, 87. pp. 854-862. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.078.

Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2013) Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40. pp. 231-238. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.10.007.

Alengaram, Ubagaram Johnson and Muhit, B.A.A and Jumaat, Mohd Zamin (2013) Utilization of oil palm kernel shell as lightweight aggregate in concrete - a review. Construction and Building Materials, 38. pp. 161-172. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.08.026.

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.11.035.

Safiuddin, M. and Alengaram, Ubagaram Johnson and Salam, M.A. and Jumaat, Mohd Zamin and Jaafar, F.F. and Saad, H.B. (2011) Properties of high-workability concrete with recycled concrete aggregate. Materials Research-Ibero-American Journal of Materials, 14 (2). pp. 248-255. ISSN 1516-1439, DOI https://doi.org/10.1590/S1516-14392011005000039.

Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mahmud, H. and Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.12.032.

Shafigh, Payam and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.06.015.

Shirazi, S.M. and Akib, Shatirah and Salman, Firas A. and Alengaram, Ubagaram Johnson and Jameel, Mohammed (2010) Agro-ecological aspects of groundwater utilization: A case study. Scientific Research and Essays, 5 (18). pp. 2786-2795. ISSN 1992-2248,

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950,

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin and Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950,

Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Mahmud, Hilmi (2009) Shear strength of oil palm shell foamed concrete beams. Materials & Design, 30 (6). pp. 2227-2236. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2008.09.024.

Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mahmud, H. (2008) Ductility behaviour of reinforced palm kernel shell concrete beams. European Journal of Scientific Research, 23 (3). pp. 406-420. ISSN 1450216X,

Conference or Workshop Item

Alengaram, Ubagaram Johnson and Mohottige, H.W.N. and Wu, C.Q. and Jumaat, Mohd Zamin and Yap, Soon Poh and Wang, Z.Q. (2016) Ductile behaviour of oil palm shell concrete slabs subjected to blast loads. In: Proceedings of the 4th International Conference on Protective Structures, 18 - 21 October 2016, Beijing, China.

Alengaram, Ubagaram Johnson and Hashim, Roslan and Lai, Sai Hin (2014) Delivery and assessment techniques for the subject "integrated design" in civil engineering. In: 1st International Congress and Exhibition on Current Trends on Science and Technology Education, 24-27 Apr 2014, Fethiye-Mugla, Turkey.

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.

Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2009) Structural Behaviour Of Oil Palm Shell Concrete Beams. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

This list was generated on Sat Mar 2 02:41:45 2024 +08.