Storage stability of biofuel

Varman, M. and Masjuki, Haji Hassan and Cheah, M.Y. and Cheng, Y.H. and Kalam, M.A. and Liaquat, A.M. and Shahabuddin, M. and Mofijur, M. (2012) Storage stability of biofuel. In: 2012 International Symposium on Energy Technology and Strategy, 22-24 November 2012, Tainan, Taiwan.

PDF (This document contains Abstract and Presentation file)
m-varman_taiwan2012_conference.pdf - Published Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (1MB)
Official URL:


Biofuel is one of the prime candidates to take over the role played by fossil fuel as the main source of energy in the future. Numerous studies have been done on the potential of biofuel to produce similar power output generated by the current petrol and diesel which are depleting without any drawbacks. The objective of this particular study is to investigate 4 of the more established vegetable oil in the energy industry namely jatropha, palm, coconut and canola oil in terms of storage stability of biofuel at room temperature and 80ºC. The biofuels were tested in terms of density, kinematic viscosity, Total Acid Number (TAN), flash point and oxidation stability every 2 weeks for 10-12 weeks or 3 months at 2 different temperatures to obtain a conspicuous result. At the end of the experiment and test, it is found that palm oil is the biofuel with the best storage stability. The next biofuel that followed is jatropha oil, canola oil and finally coconut oil. Although palm oil showed poor kinematic viscosity, however it has good stability in terms of density, Total Acid Number (TAN) and also relatively stable oxidation and flash point in comparison with the 4 samples tested. The experiment result and data also showed that effect of continuous heating at 80ºC promotes oxidation process, higher Total Acid Number (TAN), lower flash point as well as increase in density and kinematic viscosity. Next, experimental investigations were carried out to evaluate the storage stabilities of various biodiesel fuels. The biodiesel fuels were palm methyl ester (PME), jatropha methyl ester (JME), coconut methyl ester (COME), 20% blends of PME with diesel fuel and 20% blends of JME with diesel fuel. The ordinary diesel fuel was used for comparison purposes. The biodiesel were tested in terms of density, kinematic viscosity, Total Acid Number (TAN), flash point and oxidation stability every week for 3 months. The results show that almost all fuel samples met the standard specifications regarding oxidation stability. The trends for density, viscosity and TAN increased due to oxidation. For the flash point, the trend also decreased, but the rate was very low. In overall consideration, among the biodiesel, COME was found to be better with respect to storage stabilities. The results of this investigation will be used for sustainable development of biodiesel fuel from various feedstocks.

Item Type: Conference or Workshop Item (Paper)
Additional Information: Organized by Research Center for Energy Technology and Strategy National Cheng Kung University
Uncontrolled Keywords: Biofuel; Jatropha; Palm; Coconut; Canola; Storage stability; Biodiesel
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TL Motor vehicles. Aeronautics. Astronautics
Divisions: Faculty of Engineering
Depositing User: Dr. Mahendra Varman Munusamy
Date Deposited: 20 Oct 2015 01:46
Last Modified: 18 Oct 2018 01:12

Actions (login required)

View Item View Item