A 54 μW CMOS auto-trimming bandgap references (ATBGR) achieving 90 dB PSRR for artificial intelligence of things (AIoT) chips

Poongan, Balamahesn and Rajendran, Jagadheswaran and Mariappan, Selvakumar and Rawat, Arvind Singh and Kumar, Narendra and Nathan, Arokia and Yarman, Binboga S. (2023) A 54 μW CMOS auto-trimming bandgap references (ATBGR) achieving 90 dB PSRR for artificial intelligence of things (AIoT) chips. Micromachines, 14 (9). ISSN 2072-666X, DOI https://doi.org/10.3390/mi14091724.

Full text not available from this repository.

Abstract

An Auto-Trimming CMOS Bandgap References Circuit (ATBGR) with PSRR enhancement circuit for Artificial Intelligence of Things (AIoT) chips is presented in this paper. The ATBGR is designed with a first-order temperature compensation technique providing a stable reference voltage of 1.25 V in the ranges of input voltages from 1.65 V to 4.5 V. An auto-trimming circuit is integrated into a PTAT resistor of BGR to minimize the influences of the process variations. The four parallel resistor pairs with PMOS switches are connected in series with the PTAT resistor. The reference voltage, VREF, is compared to an external constant value, 1.25 V, through an operational amplifier, and the output of the de-multiplexer is used to configure the PMOS switches. High power supply rejection is achieved through a PSRR enhancement circuit constituting a cascaded PMOS common gate pair. The ATBGR circuit is fabricated in 180 nm CMOS technology, consuming an area of 0.03277 mm2. The auto-trimming method yields an average temperature coefficient of 9.99 ppm/degrees C with temperature ranges from -40 degrees C to 125 degrees C, and a power supply rejection ratio of -90 dB at 100 MHz is obtained. The line regulation of the proposed circuit is 0.434%/V with power consumption of 54.12 mu W at room temperature.

Item Type: Article
Funders: CEDEC, Fundamental Research Grant Scheme [Grant no. FRGS/1/2019/TK04/USM/02/14], Ministry of Higher Education, Malaysia, Universiti Sains Malaysia
Uncontrolled Keywords: Bandgap voltage reference (BGR); Power supply rejection ratio (PSRR); Artificial intelligence and Internet of Things (AIoT); CMOS
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Faculty of Engineering > Department of Electrical Engineering
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 18 Oct 2025 06:43
Last Modified: 18 Oct 2025 06:43
URI: http://eprints.um.edu.my/id/eprint/48159

Actions (login required)

View Item View Item