Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication

Asadi-Eydivand, Mitra and Solati-Hashjin, Mehran and Abu Osman, Noor Azuan (2018) Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication. Rapid Prototyping Journal, 24 (8). pp. 1392-1400. ISSN 1355-2546, DOI https://doi.org/10.1108/RPJ-06-2015-0077.

Full text not available from this repository.
Official URL: https://doi.org/10.1108/RPJ-06-2015-0077

Abstract

Purpose: This paper aims to investigate the mechanical behavior of three-dimensional (3D) calcium sulfate porous structures created by a powder-based 3D printer. The effects of the binder-jetting and powder-spreading orientations on the microstructure of the specimens are studied. A micromechanical finite element model is also examined to predict the properties of the porous structures under the load. Design/methodology/approach: The authors printed cylindrical porous and solid samples based on a predefined designed model to study the mechanical behavior of the prototypes. They investigated the effect of three main build bed orientations (x, y and z) on the mechanical behavior of solid and porous specimens fabricated in each direction then evaluated the micromechanical finite-element model for each direction. The strut fractures were analyzed by scanning electron microscopy, micro-computed tomography and the von Mises stress distribution. Findings: Results showed that the orientation of powder spreading and binder jetting substantially influenced the mechanical behavior of the 3D-printed prototypes. The samples that were fabricated parallel to the applied load had higher compressive strength compared with those printed perpendicular to the load. The results of the finite element analysis agreed with the results of the experimental mechanical testing. Research limitations/implications: The mechanical behavior was studied for the material and the 3D-printing machine used in this research. If one were to use another material formulation or machine, the printing parameters would have to be set accordingly. Practical implications: This work aimed to re-tune the control factors of an existing rapid prototyping process for the given machine. The authors achieved these goals without major changes in the already developed hardware and software architecture. Originality/value: The results can be used as guidelines to set the printing parameters and a model to predict the mechanical properties of 3D-printed objects for the development of patient- and site-specific scaffolds.

Item Type: Article
Funders: UNSPECIFIED
Uncontrolled Keywords: Mechanical properties; Prototyping; Rapid prototyping; Scaffolds
Subjects: R Medicine
Divisions: Faculty of Engineering
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 19 Sep 2019 08:11
Last Modified: 19 Sep 2019 08:11
URI: http://eprints.um.edu.my/id/eprint/22448

Actions (login required)

View Item View Item