Stable mode-locked fiber laser using 49 cm long bismuth oxide based erbium doped fiber and slow saturable absorber

Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Akbari, Reza and Ahmad, Harith (2011) Stable mode-locked fiber laser using 49 cm long bismuth oxide based erbium doped fiber and slow saturable absorber. Laser Physics, 21 (5). pp. 913-918. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X11090209.

Full text not available from this repository.
Official URL: https://doi.org/10.1134/S1054660X11090209

Abstract

A stable mode-locked fiber laser employing a 49 cm long bismuth oxide based erbium doped fiber (Bi-EDF) by using a slow saturable absorber is demonstrated. Near transform limited short pulses with a repetition rate of 8.27 MHz are obtained at a wavelength of 1560 nm with a maximum spectral width of 15 nm. Results indicate that pulse characteristics are strongly dependent on pump power rather than spectral width. Moreover the Time-Bandwidth products (TBWP), pulse duration, the energy fluctuation and timing jitter decrease with increasing pump power. The pulse width is continuously varied from 1.2 ps to less than 300 fs. It produces stable mode locking with a maximum spectral width of 15 nm, minimum timing jitter of 4 ps and energy fluctuations of 2.5%. The pulse train was amplified using a two-stage amplifier up to 447 mW average power corresponding to peak powers of 177.3 kW.

Item Type: Article
Funders: UNSPECIFIED
Uncontrolled Keywords: Bismuth; Erbium; Fiber lasers; Fibers; Optical pumping; Pulse repetition rate; Pumps; Q switched lasers; Timing jitter
Subjects: Q Science > QC Physics
T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Faculty of Engineering
Faculty of Science > Department of Physics
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 31 Dec 2018 11:07
Last Modified: 08 Apr 2019 05:06
URI: http://eprints.um.edu.my/id/eprint/19845

Actions (login required)

View Item View Item