Al-Sehemi, A.G. and Al-Assiri, M.S. and Kalam, A. and Zafar, Q. and Azmer, M.I. and Sulaiman, Khaulah and Ahmad, G. (2016) Sensing performance optimization by tuning surface morphology of organic (D-π-A) dye based humidity sensor. Sensors and Actuators B: Chemical, 231. pp. 30-37. ISSN 0925-4005, DOI https://doi.org/10.1016/j.snb.2016.03.004.
Full text not available from this repository.Abstract
We present herein the effect of varied humidity levels on the electrical parameters of the (E)-2-{4-[2-(3,4,5-trimethoxybenzylidene) hydrazinyl]phenyl}ethylene-1,1,2-tricarbonitrile (TMBHPET) organic dye based humidity sensor. TMBHPET dye has been synthesized bearing an additional methoxy group substituent at the terminal benzene ring of previously reported (E)-2-(4-(2-(3,4-dimethoxybenzeylidene)hydrazinyl)phenyl)ethane-1,1,2-tricarbonitrile (DMBHPET) dye. The strategic dye design is believed to increase the π-electron polarizability in the dye structure. Capacitive type humidity sensor has been fabricated in planar geometry of Al/TMBHPET/Al and its capacitance has been monitored as a function of relative humidity (RH) level at varied frequencies of ∼1 v AC input bias. A maximum sensitivity ∼46 fF/%RH at 1 kHz has been observed which is almost seven times higher as that of DMBHPET based humidity sensor which may be attributed to the porous surface morphology of TMBHPET sensing film. The sensor has also shown reversible changes in its capacitance with variation in humidity level and hysteresis value has been observed to be 2.4%. The motive of the present study was to increase the sensing parameters of the previously reported humidity sensor utilizing DMBHPET dye, which has been successfully achieved.
| Item Type: | Article |
|---|---|
| Funders: | Promising Centre for Sensors and Electronic Devices (PCSED) at Najran University, Kingdom of Saudi Arabia: Grant number PCSED-005-14, Ministry of Education: High Impact Research (HIR) grant UM.S/625/3/HIR/MOE/26 with account number UM.0000080/HIR.C3 and University Malaya Research Grant (UMRG) under grant number RP007A-13AFR |
| Uncontrolled Keywords: | Organic (D-π-A) dye; Humidity sensor; Tuning of surface morphology; Sensing parameters optimization; Field emission scanning electron microscope; Atomic force microscope (AFM) |
| Subjects: | Q Science > QC Physics |
| Divisions: | Faculty of Science > Department of Physics |
| Depositing User: | Ms. Juhaida Abd Rahim |
| Date Deposited: | 14 Nov 2017 07:59 |
| Last Modified: | 14 Jan 2019 01:16 |
| URI: | http://eprints.um.edu.my/id/eprint/18264 |
Actions (login required)
 |
View Item |
