Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders

Ali, B. and Sabri, M.F.M. and Jauhari, I. and Sukiman, N.L. (2016) Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders. Microelectronics Reliability, 63. pp. 224-230. ISSN 0026-2714, DOI https://doi.org/10.1016/j.microrel.2016.05.004.

Full text not available from this repository.
Official URL: https://doi.org/10.1016/j.microrel.2016.05.004

Abstract

In this study, the new Fe/Bi-bearing Sn-1Ag-0.5Cu (SAC105) solder alloys were studied for their mechanical properties, including impact toughness, hardness and shear strength. Charpy impact tester with impact speed of 5.4 m/s was used to determine the impact absorbed energy during impact tests. With the 0.05 wt.% Fe and 1 wt.% Bi addition to the SAC105 alloy, the impact absorbed energy increased from 8.1 J to 9.7 J by about 20% and literally no further improvement was observed by increasing the Bi content in the alloy. Vickers hardness tests were performed with a load of 245.2 mN and load dwell time of 10 s. The addition of Fe/Bi to SAC105 increased the hardness of the alloy from 10.5 HV to 22.6 HV showing an increase of more than two fold. Shear tests were performed with a shear speed of 0.25 mm/min. Shear strength almost doubled for the Fe/Bi added SAC105, as compared to the base alloy, increasing from 17.8 MPa to 34.3 MPa. The microstructure study shows that Bi is dissolved in the solder bulk and strengthens the solder alloys by its solid solution strengthening mechanism. The β-Sn grain size, as revealed by cross-polarized optical microscopy, significantly reduced from 60–100 μm to 20–40 μm with Fe/Bi addition to SAC105. The micrographs of field emission scanning electron microscopy (FESEM) with backscattered electron detector and their further analysis via ImageJ software indicated that Fe/Bi addition to SAC105 significantly reduced the Ag3Sn and Cu6Sn5 IMCs size and refined the microstructure. These changes in the microstructure of Fe/Bi added SAC105 expectedly resulted in such improvement in their mechanical properties.

Item Type: Article
Funders: University of Malaya: UMRG grants project No.: RP003A/13AET and RP003B/13AET, University of Malaya: HIR grant project No.: UM.C/625/1/HIR/MOE/ENG/29
Uncontrolled Keywords: SAC105; Lead-free solder; Fe/Bi additives; Impact toughness; Hardness; Shear strength
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 10 Nov 2017 05:49
Last Modified: 10 Nov 2017 05:49
URI: http://eprints.um.edu.my/id/eprint/18221

Actions (login required)

View Item View Item