Review on bonding techniques of CFRP in strengthening concrete structures

Jumaat, Mohd Zamin and Rahman, M.M. and Rahman, M.A. (2011) Review on bonding techniques of CFRP in strengthening concrete structures. International Journal of Physical Sciences, 6 (15). pp. 3567-3575. ISSN 19921950, DOI https://doi.org/10.5897/IJPS10.376.

Preview

PDF (Review on bonding techniques of CFRP in strengthening concrete structures) Review_on_bonding_techniques_of_CFRP_in_strengthening_concrete_structures.pdf - Published Version Download (297kB)

Abstract

Selecting appropriate bonding technique is crucial for strengthening and repairing concrete structures as different bonding techniques have different performances. A state-of-the-art review of different bonding techniques that is epoxy bonding technique, prestressed strengthening technique, unbonded anchored technique/mechanically fastened technique using CFRP is dealt and the corresponding advantages and disadvantages are highlighted in this review. Existing unbonded anchored techniques/mechanically fastened techniques are critically reviewed and compared to the other conventional strengthening techniques which will help in selecting the appropriate bonding technique for strengthening and repairing concrete structures. Future recommendations in this field are also indicated in this paper.

Item Type:	Article
Funders:	UNSPECIFIED
Additional Information:	Export Date: 6 January 2013 Source: Scopus Language of Original Document: English Correspondence Address: Rahman, M. M.; Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia; email: mukhlesrhd@yahoo.com References: (2008) Guide for the Design and Construction of Externally Bonded FRP System for Strengthening Concrete Structures, p. 45. , ACI 440.2R-08., ACI Committee 440, American Concrete Institute, Farmington Hills, MI; (2004) Prestressing Concrete Structures with FRP Tendons, p. 35. , ACI 440.4R-04., ACI Committee 440, American Concrete Institute, Farmington Hills, MI; Aram, M.R., Czaderski, C., Motavalli, M., Debonding failure modes of flexural FRP-strengthened RC beams (2008) Compos. Part B: Eng., 39, pp. 826-841; Badawi, M., (2007) Monotonic and Fatigue Flexural Behaviour of RC Beams Strengthened with Prestressed NSM CFRP Rods, , PhD thesis, University of Waterloo, Waterloo, Ontario, Canada; Badawi, M., Soudki, K., Flexural strengthening of RC beams with prestressed NSM CFRP rods-Experimental and analytical investigation (2009) Constr. Build. Mater., 23, pp. 3292-3300; Baghiee, N., Esfahani, R.M., Moslem, K., Studies on damage and FRP strengthening of reinforced concrete beams by vibration monitoring (2009) Eng. Struct., 31, pp. 875-893; Bank, L.C., Mechanically fastened FRP (MF-FRP)-A viable alternative for strengthening RC members (2004) FRP Composites in Civil Engineering-Seracino, , Ed., Adelaide, AUSTRALIA, University of Adelaide; Barros, J.A.O., Varma, R.K., Sena-Cruz, J.M., Azevedo, A.F.M., Near surface mounted CFRP strips for the flexural strengthening of RC columns: Exp (2008) Eng. Struc., 30, pp. 3412-3425; Borowicz, D.T., (2002) Rapid strengthening of concrete beams with powder-actuated fastening syst. and fiber reinforced polymer (FRP) composite material, , MS thesis, Department of Civil Engineering, University of Wisconsin-Madison, Madison, Wise. USA; Capozucca, R., Static and dynamic response of damaged RC beams strengthened with NSM CFRP rods (2009) Compos. Struct., 91, pp. 237-248; Ceroni, F., Experimental performances of RC beams strengthened with FRP material (2010) Constr. Build. Mater., 24, pp. 1547-1559; Ceroni, F., Pecce, M., Matthys, S., Taerwe, L., Debonding strength and anchorage devices for reinforced concrete elements strengthened with FRP sheets (2008) Compos. Part B: Eng., 39, pp. 429-441; Chen, J.F., Teng, J.G., Anchorage Length Models for FRP and Steel Plates Bonded to Concrete (2001) J. Struct. Eng., 127, pp. 784-791; Choi, H.T., (2008) Flexural Behaviour of Partially Bonded CFRP Strengthened Concrete T-Beams, , PhD thesis, University of Waterloo, Civil and Environmental Engineering, Waterloo, Ontario, Canada; Costa, I.G., Barros, J.A.O., Flexural and shear strengthening of RC beams with composite material-The influence of cutting steel stirrups to install CFRP strips (2010) Cem. Concr. Compos, , In Press, Corrected Proof; Dai, J., Ueda, T., Sato, Y., Devel of the Nonlinear Bond Stress-Slip Model of Fiber Reinforced Plastics Sheet-Concrete Interfaces with a Simple Method (2005) J. Compos. Constr., 9, pp. 52-62; El-Hacha, R., Filho, D.S., Melo, G.S., Rizkalla, S.H., Effective of Near Surface Mounted FRP Reinforcement for Flexural Strengthening of Reinforced Concrete Beams (2004) Proceedings of International Conference on Advanced Composite Materials in Bridges and Structures, , ACMBS-IV, Calgary, Ontario, Canada; El-Hacha, R., Green, M.F., Wight, R.G., Innovative System for Prestressing FRP Sheets (2003) ACI Struct. J., 100, pp. 239-252; El-Hacha, R., Green, M.F., Wight, R.G., Flexural Behaviour of Concrete Beams Strengthened with Prestressed Carbon Fibre Reinforced Polymer Sheets Subjected to Sustained Loading and Low Temperature (2004) C. J. Civil Eng., 31, pp. 239-252; El-Hacha, R., Rizkalla, S.H., Near-Surface-Mounted Fiber-Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures (2004) ACI. Struct. J., 101, pp. 717-726; El Refai, A., (2007) Monotonic and fatigue flexural performance of RC beams strengthened with externally post-tensioned CFRP tendons, , PhD thesis, University of Waterloo, Waterloo, Ontario, Canada; Eshwar, N., Nanni, A., Ibell, T.J., Performance of Two Anchor Syst. of Externally Bonded Fiber-Reinforced Polymer Laminates (2008) ACI Mater. J., 105, pp. 72-80; Gaafar, M.A., El-Hacha, R., Prestressing concrete beams using NSM FRP technique (2007) Proceedings of International Symposium on Fiber-Reinforced Polymer Reinforcement in Concrete Structures, pp. 8-11. , FRPRCS-8, Partas, Greece; Galati, D., Rizzo, A., Micelli, F., Comparison of reinforced concrete beams strengthened with FRP pre-cured laminate system and tested under flexural loading (2007) Proceedings of the Eighth International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-8, Thanasis C, p. 10. , In, Triantafillou, Ed., Patras, GREECE; Hassan, T., Rizkalla, S.H., Flexural Strengthening of Prestressed Bridge Slabs with FRP System (2002) PCI J., 47, pp. 76-93; FRP Rehabilitation of Reinforced Concrete Structures (2008) Design Manual, No. 4, , ISIS Canada Corporation, Winnipeg, Manitoba, Canada, ISIS Canada Network of Excellence; Jumaat, M.Z., Alam, M.A., Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened R. C. beams (2010) Int. J. Phys. Sci., 5, pp. 132-144; Jumaat, M.Z., Rahman, M.M., Alam, M.A., Flexural strengthening of RC continuous T beam using CFRP laminate: A review (2010) Int. J. Phys. Sci., 5 (6), pp. 619-625; Jung, W.T., Park, H.Y., Park, J.S., Kang, J.Y., Yoo, Y.J., Experimental Investigation on Flexural Behavior of RC Beams Strengthened by NSM CFRP Reinforcement (2005) Proceedings of International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures, pp. 795-806. , ACI Symp, Publication, SP-230-46; Jung, W.T., Park, J.S., Park, Y.H., A study on the Flexural Behavior of Reinforced Concrete Beams Strengthened with NSM Prestressed CFRP Reinforcement (2007) Proceedings of International Symposium on Fiber-Reinforced Polymer Reinforcement in Concrete Structures, pp. 8-10. , FRPRCS-8, Partas, Greece; Kothandaraman, S., Vasudevan, G., Flexural retrofitting of RC beams using external bars at soffit level-An experimental study (2010) Constr. Build. Mater, , In Press, Corrected Proof; Lamanna, A.J., Bank, L.C., Scott, D.W., Flexural strengthening of RC beams by mechanically attaching fiber-reinforced polymer strips (2004) J. Compos. Constr., 8 (3), pp. 203-210; Lamanna, A.J., Bank, L.C., Scott, D.W., Flexural strengthening of RC beams using fasteners and fiber-reinforced polymer strips (2001) ACI Struct. J., 98 (3), pp. 368-376; Lee, J.H., Lopez, M.M., Bakis, C.E., Flexure behaviour of reinforced concrete beams strengthened with mechanically fastened FRP strip (2007) Proceedings of the Eighth International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures, p. 9. , In, FRPRCS-8, Thanasis C. Triantafillou, Ed., Patras, GREECE; Lorenzis, L., Nanni, A., Bond between Near-Surface Mounted Fiber-Reinforced Polymer Rods and Concrete in Structural Strengthening (2002) ACI Struct. J., 99 (2), pp. 123-132; Lorenzis, L., Lundgren, K., Rizzo, A., Anchorage Length of Near-Surface Mounted Fiber-Reinforced Polymer Bars for Concrete Strengthening-Experimental Investigation and Numerical Modeling (2004) ACI Struct. J., 101 (2), pp. 269-278; Lorenzis, L., Miller, B., Nanni, A., Bond of Fiber-Reinforced Polymer Laminates to Concrete (2001) ACI Mater. J., 98 (3), pp. 256-264; Millar, D., Scott, P., Clenin, R., Bridge Strengthening with Prestressed CFRP Plate System (2004) Proceedings of the Second International Conference on FRP Composites in Civil Engineering, pp. 463-469. , Adelaide, Australia; Mohamed, B.B., Abdelouahed, T., Samir, B., Approximate analysis of adhesive stresses in the adhesive layer of plated RC beams (2009) Comput. Mater. Sci., 46, pp. 15-20; Mukherjee, A., Rai, G.L., Performance of reinforced concrete beams externally prestressed with fiber composites (2009) Constr. Build. Mater., 23, pp. 822-828; Nakaba, K., Kanakuto, T., Furuta, T., Yoshizawa, H., Bond Behavior between Fiberreinforced Polymer Laminates and Concrete (2001) ACI Struct. J., 98 (3), pp. 359-367; Nanni, A., Bakis, C.E., Boothby, T.E., Test method for FRP-concrete systems subjected to mechanical loads: Stage of the art review (1995) J. Rein. Plast. Compos., 14 (6), pp. 524-558; Nordin, H., Taljsten, B., Prestressed Near Surface Mounted Reinforcement (NSMR) for Strengthening Concrete Beams (2004) Proceedings of the Second International Conference on FRP Composites in Civil Engineering, pp. 447-454. , Adelaide, Australia; Nordin, H., Taljsten, B., Concrete beams strengthened with prestressed near surface mounted CFRP (2006) J. Compos. Constr., 10 (1), pp. 60-68; Ombres, L., Prediction of intermediate crack debonding failure in FRP-strengthened reinforced concrete beams (2010) Compos. Struct., 92, pp. 322-329; Pham, H., Al-Mahaidi, R., Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams (2006) J. Compos. Constr., 10, pp. 48-59; Pham, H., Al-Mahaidi, R., Assessment of Available Prediction Models for the Strength of FRP Retrofitted RC Beams (2004) Compos. Struct., 66 (1-4), pp. 601-610; Rasheed, H.A., Harrison, R.R., Peterman, R.J., Alkhrdaji, T., Ductile strengthening using externally bonded and near surface mounted composite systems (2010) Compos. Struct., 92, pp. 2379-2390; Tan, K.H., Saha, M.K., Liew, Y.S., FRP-strengthened RC beams under sustained loads and weathering (2009) Cem. Concr. Compos., 31, pp. 290-300; Wang, Y.C., Hsu, K., Design recommendations for the strengthening of reinforced concrete beams with externally bonded composite plates (2009) Compos. Struct., 88, pp. 323-332; Wight, R.G., Green, M.F., Erki, M.A., Prestressed FRP Sheets for Poststrengthening Reinforced Concrete Beams (2001) J. Compos. Constr., 5 (4), pp. 214-220; Xiong, G.J., Jiang, X., Liu, J.W., Chen, L., A way for preventing tension delamination of concrete cover in midspan of FRP strengthened beams (2007) Constr. Build. Mater., 21, pp. 402-408
Uncontrolled Keywords:	Epoxy bonding, Mechanically fastened technique, Unbonded anchored technique.
Subjects:	T Technology > TA Engineering (General). Civil engineering (General)
Divisions:	Faculty of Engineering
Depositing User:	Mr Jenal S
Date Deposited:	29 Apr 2013 02:12
Last Modified:	05 Feb 2020 04:32
URI:	http://eprints.um.edu.my/id/eprint/5969

Actions (login required)

View Item