Safiuddin, M. and Rahman, M.M. and Salam, M.A. and Md.Isa, M.H. and Jumaat, Mohd Zamin (2012) Properties of self-consolidating palm oil fuel ash concrete. Advanced Science Letters, 17 (1). pp. 312-319. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.4268.
Full text not available from this repository.Abstract
This paper presents the fresh and hardened properties of self-consolidating palm oil fuel ash concretes. Different self-consolidating concrete mixtures were produced based on the water/binder ratios of 0.40, 0.50 and 0.60. Palm oil fuel ash was incorporated in concretes substituting 0, 5, 10, and 15 of normal portland cement by weight. The freshly mixed concretes were tested for filling ability, passing ability, and segregation resistance. The hardened concretes were tested for compressive strength, ultrasonic pulse velocity, water absorption, and permeable porosity. The effects of water/binder ratio and palm oil fuel ash content on the properties of concrete were observed. The correlations of compressive strength with ultrasonic pulse velocity and permeable porosity were also indentified. According to test results, the compressive strength and ultrasonic pulse velocity decreased while the water absorption and permeable porosity increased with higher water/binder ratio. Palm oil fuel ash was not effective in improving the hardened properties of concretes produced with the water/binder ratios of 0.50 and 0.60. However, significant improvement was observed when palm oil fuel ash was used in concrete with the water/binder ratio of 0.40. The optimum palm oil fuel ash content was 5 in the context of present study. © 2012 American Scientific Publishers. All rights reserved.
| Item Type: | Article |
|---|---|
| Funders: | UNSPECIFIED |
| Additional Information: | Export Date: 6 January 2013 Source: Scopus Language of Original Document: English Correspondence Address: Safiuddin, M.; Faculty of Engineering, Department of Civil and Environmental Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada References: Khayat, K.H., (1999) ACI Mater. J., 96, p. 346; Aggarwal, P., Siddique, R., Aggarwal, Y., Gupta, S.M., (2008) Leonardo Electron. J. Pract. Technol., 12, p. 15; Dhonde, H.B., Mo, Y.L., Hsu, T.T.C., Vogel, J., (2007) ACI Mater. J., 104, p. 491; Safiuddin, M., (2008) Development of self-consolidating high performance concrete incorporating rice husk ash, , Ph.D. Thesis, University of Waterloo, Waterloo, Ontario, Canada; Safiuddin, M., West, J.S., Soudki, K.A., (2010) Cem. Concr. Compos., 32, p. 708; Safiuddin, M., West, J.S., Soudki, K.A., (2012) Constr. Build. Mater., 30, p. 833; Khayat, K.H., (2000) ACI Mater. J., 97, p. 526; Bouzoubaâ, N., Lachemi, M., (2001) Cem. Concr. Res., 31, p. 413; Okamura, H., Ozawa, K., (1994) Proceedings of the International Workshop on High-Performance Concrete, p. 31. , edited by P. Zia, American Concrete Institute, Farmington Hills, Michigan, USA; Safiuddin, M., Isa, M.H.M., Jumaat, M.Z., (2011) Chiang Mai J. Sci., 38, p. 389; Sata, V., Jaturapitakkul, C., Kiattikomol, K., (2007) Constr. Build. Mater., 21, p. 1589; Tangchirapat, W., Saeting, T., Jaturapitakkul, C., Kiattikomol, K., Siripanichgorn, A., (2007) Waste Manage., 27, p. 81; Tay, J.-H., Show, K.-Y., (1995) Resour. Conserv. Recycl., 13, p. 27; Chindaprasirt, P., Homwuttiwong, S., Jaturapitakkul, C., (2007) Constr. Build. Mater., 21, p. 1492; Awal, A.S.M.A., Hussin, M.W., (1999) Durability of Building Materials and Components, , edited by M. A. Lacasse and D. J. Vanier, Institute for Research in Construction, Ottawa Ontario, Canada; ASTM C 33, Standard specification for concrete aggregates (2004) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; ASTM C 618, Standard specification for fly ash and raw or calcined natural pozzolan for use as a mineral admixture in portland cement concrete (2009) Annual Book of ASTM Standards, , 04.02 American Socity for Testing and Materials, Philadelphia, USA; (2009) Annual Book of ASTM Standards, , STM C 430, Standard test method for fineness of hydraulic cement by the 45-m (No. 325) sieve, in: Vol. 04.01, American Society for Testing and Materials, Philadelphia, USA; ASTM C 150, Standard specification for portland cement (2002) Annual Book of ASTM Standards, , 04.01 American Society for Testing and Materials, Philadelphia, USA; (2002) EFNARC, Specifications and guidelines for self-consolidating concrete, European Federation of Suppliers of Specialist Construction Chemicals (EFNARC), Surrey, , UK; Do, E., (1975) Design of normal concrete mixes, , Department of Environment, The Building Research and Establishment (BRE) Publication, Watford, UK; ASTM C1611/C 1611M, Standard test method for slump flow of selfconsolidating concrete (2006) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; ASTM C 39/C 39M, Standard test method for compressive strength of cylindrical concrete specimens (2004) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; ASTM C 597, Standard test method for pulse velocity through concrete (2004) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; ASTM C 642, Standard test method for density, absorption, and voids in hardened concrete (2004) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; (2005) SCCEPG, The European guidelines for self-compacting concrete: Specification, production and use, Self-Compacting Concrete European Project Group (SCCEPG), , The European Federation of Concrete Admixtures Associations, West Midlands, UK; ASTM C1621/C 1621M, Standard test method for passing ability of selfconsolidating concrete by J-ring (2006) Annual Book of ASTM Standards, , 04.02 American Society for Testing and Materials, Philadelphia, USA; Koehler, E.P., Fowler, D.W., (2006) Research Report 108-1, International Center for Aggregates Research, , University of Texas at Austin, Texas, USA; Bonen, D., Shah, S.P., (2005) Prog. Struct. Mater. Eng., 7, p. 14; Neville, A.M., (1996) Properties of Concrete, Fourth and Final edn, , John Wiley & Sons, Inc., New York, USA; Zhang, M.H., Lastra, R., Malhotra, V.M., (1996) Cem. Concr. Res., 26, p. 963; Shetty, M., (2001) Concrete Technology: Theory and Practice, , S. Chand and Company Ltd., New Delhi, India; Naik, T.R., Malhotra, V.M., Popovics, J.S., (2004) Handbook on Nondestructive Testing of Concrete, , CRC Press, Florida, USA; Safiuddin, M., Hearn, N., (2005) Cem. Concr. Res., 35, p. 1008; Demirboǧa, R., Türkmen, I., Karakoc, M.B., (2004) Cem. Concr. Res., 34, p. 2329; Kosmatka, S.H., Kerkhoff, B.B., Panarese, W.C., (2002) Design and control of concrete mixtures, , Portland Cement Association, Skokie, Illinois, USA; Safiuddin, M., Mahmud, H.B., Jumaat, M.Z., (2011) Arab J. Sci. Eng., 36, p. 761; Al-Amoudi, O.S.B., Maslehuddin, M., Asi, I.M., (1996) Cem. Concr. Aggreg., 18, p. 71; Lian, C., Zhuge, Y., Beecham, S., (2011) Constr. Build. Mater., 25, p. 4294 |
| Uncontrolled Keywords: | Fresh properties Hardened properties Mix proportions Palm oil fuel ash Self-consolidating concrete |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
| Divisions: | Faculty of Engineering |
| Depositing User: | Mr Jenal S |
| Date Deposited: | 22 Apr 2013 01:56 |
| Last Modified: | 05 Feb 2020 04:38 |
| URI: | http://eprints.um.edu.my/id/eprint/5865 |
Actions (login required)
 |
View Item |
