Hosen, Md. Akter and Al Kaaf, Khalid Ahmed and Islam, A. B. M. Saiful and Jumaat, Mohd Zamin and Kazmi, Zaheer Abbas (2023) Behavior and modeling of RC beams strengthened with NSM-steel technique. Structural Engineering and Mechanics, 88 (1). pp. 67-81. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2023.88.1.067.
Full text not available from this repository.Abstract
The reinforced concrete (RC) structures might need strengthening or upgradation due to adverse environmental conditions, design defects, modification requirements, and to prolong the expected lifespan. The RC beams have been efficiently strengthened using the near surface mounted (NSM) approach over the externally bonded reinforcing (EBR) system. In this study, the performance of RC beam elements strengthened with NSM-steel rebars was investigated using an experimental program and nonlinear finite element modeling (FEM). Nine medium-sized, rectangular cross-section RC beams total in number made up for the experimental evaluation. The beams strengthened with varying percentages of NSM reinforcement, and the number of grooves was assessed in four-point bending experiments up to failure. Based on the experimental evaluation, the load-displacement response, crack features, and failure modes of the strengthened beams were recorded and considered. According to the experimental findings, NSM steel greatly improved the flexural strength (up to about 84%) and stiffness of RC beams. The flexural response of the tested beams was simulated using a 3D non-linear finite element (FE) model. The findings of the experiments and the numerical analysis showed good agreement. The effect of the NSM groove and reinforcement on the structural response was then assessed parametrically.
Item Type: | Article |
---|---|
Funders: | University of Malaya High Impact Research Grant [Grant no. UM.C/HIR/MOHE/ENG/36] |
Uncontrolled Keywords: | Crack characteristics; Finite element modeling; Flexural strengthening; NSM-steel |
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
Divisions: | Faculty of Engineering > Department of Civil Engineering |
Depositing User: | Ms. Juhaida Abd Rahim |
Date Deposited: | 20 Oct 2025 13:27 |
Last Modified: | 20 Oct 2025 13:27 |
URI: | http://eprints.um.edu.my/id/eprint/48116 |
Actions (login required)
![]() |
View Item |