Sahib, M. A. A. B. and Zulkipli, Nur Farhanah and Rosol, Ahmad Haziq Aiman and Yasin, Moh and Harun, Sulaiman Wadi (2022) Titanium carbide MXene as a mode locker in erbium-doped fiber laser cavity. Journal of Russian Laser Research, 43 (3). pp. 328-333. ISSN 1071-2836, DOI https://doi.org/10.1007/s10946-022-10055-0.
Full text not available from this repository.Abstract
We propose a MXene Ti3C2Tx thin-film and demonstrate as saturable absorber (SA) to generate mode-locked laser pulses. In constructing the SA, titanium carbide (Ti3C2Tx) powder obtained through a selective etching process is dispersed in polyvinyl alcohol (PVA) solution before the mixture is dried to form a thin film. A small piece of the film is placed between two fiber ferrules to form a SA device and added to an erbium-doped fiber laser (EDFL) cavity with a length of 106 m to produce mode-locked pulses. The mode-locked laser operates at 1561.2 nm with a repetition rate of 1.89 MHz and pulse width of 154 ns as the pump power is fixed within a range from 40.2 to 87.2 mW. At 87.2 mW pump power, the maximum average output power, pulse energy, and peak power were measured to be 11.85 mW, 6.24 nJ, and 40.7 mW respectively.
| Item Type: | Article |
|---|---|
| Funders: | SATU joint research scheme through University of Malaya [Grant No:ST036-2020], Airlangga University [Grant No:1127/UN3.14/PT/2020] |
| Uncontrolled Keywords: | Ti3C2Tx; Mode locking; MXene; Saturable absorber |
| Subjects: | Q Science > QC Physics T Technology > T Technology (General) |
| Divisions: | Faculty of Engineering > Department of Electrical Engineering |
| Depositing User: | Ms. Juhaida Abd Rahim |
| Date Deposited: | 11 Oct 2023 06:51 |
| Last Modified: | 11 Oct 2023 07:02 |
| URI: | http://eprints.um.edu.my/id/eprint/42147 |
Actions (login required)
 |
View Item |
