Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia

Al Qudah, Ayman and Ghazaly, Zuhayr Md and Mashaan, Nuha Salim and Koting, Suhana and Napiah, Madzlan and Wan Omar, Wan Mohd Sabki and Issa, Yazan (2018) Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1356-1369. ISSN 0976-6308,

Full text not available from this repository.
Official URL: https://www.iaeme.com/MasterAdmin/Journal_uploads/...

Abstract

To prevent pavement failure there are different solutions such as adopting new mix methods or utilization of waste materials as additives. The main objective of this study is to evaluate the effect of crumb rubber (CR) added to bitumen binder as a reinforcing material on dense graded asphalt (DGA) mixture performance. The performances of the DGA mixture were investigated by means of Marshall Stability and flow test, stiffness test, indirect tensile strength test and cantabro test on DGA samples before and after exposing unmodified and modified binders to aging process. In this study, bitumen PEN (60/70) was utilized, modified with CR at three various modification levels, namely, 5%, 10%, and 15%, respectively, by weight of the asphalt binder. The optimum content of the added CR was found to be 5-10%. This percentage results in the best level of stability and stiffness, maximum indirect tensile strength and lower flow. The modified samples at different of CR contents were obviously better properties in comparison with that of unmodified samples. It could be concluded that reinforcement of binders by CR is a successful and beneficial technique.

Item Type: Article
Funders: Ministry of Higher Education Malaysia: Research Acculturation Grant Scheme (RAGS) 2015, No. 9018-00088
Uncontrolled Keywords: Abrasion loss; Bitumen Aging; Crumb rubber; Dense Graded Performance; Indirect tensile strength; Modified Bitumen; Stability; Stiffness
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Faculty of Engineering
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 27 Sep 2019 02:16
Last Modified: 27 Sep 2019 02:16
URI: http://eprints.um.edu.my/id/eprint/22602

Actions (login required)

View Item View Item