Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | G | I | J | K | L | M | N | R | S | T | V | Y | Z
Number of items at this level: 37.

A

Abedin, M.J. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Arbab, M.I. and Rizwanul Fattah, I.M. and Masum, B.M. (2014) Experimental investigation of a multicylinder unmodified diesel engine performance, emission, and heat loss characteristics using different biodiesel blends: Rollout of B10 in Malaysia. Scientific World Journal, 2014. p. 349858. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/349858.

Adji, B.M. and Roza, A. and Raja Abdul Aziz, R.S. and Karim, M.R. (2011) Intercity bus transportation system and its competition in Malaysia. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Afzal, Asif and Soudagar, Manzoore Elahi M. and Belhocine, Ali and Kareemullah, Mohammed and Hossain, Nazia and Alshahrani, Saad and Saleel, Ahamed C. and Subbiah, Ram and Qureshi, Fazil and Mujtaba, Muhammad Abbas (2021) Thermal performance of compression ignition engine using high content biodiesels: A comparative study with diesel fuel. Sustainability, 13 (14). ISSN 2071-1050, DOI https://doi.org/10.3390/su13147688.

Ahmad, Iftikhar and Kalsoom, Nafeesa and Khalid, Samina and Ahmed, Zaheed (2022) Quality of service enabled resource scheduling for cooperative driving provision in the internet of vehicles. International Journal of Mobile Communications, 20 (5). pp. 507-518. ISSN 1470-949X, DOI https://doi.org/10.1504/IJMC.2022.125424.

Ashrafur Rahman, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Sanjid, A. and Abedin, M.J. (2014) Assessing effect of idling on compression ignition engine operated with palm, jatropha and calophyllum biodiesel blends. Journal of the Institute of Industrial Applications Engineers, 2 (3). pp. 122-126. ISSN 2187-8811,

Aslam, M.U. and Masjuki, Haji Hassan and Kalam, M.A. and Abdesselam, H. and Varman, M. and Mahlia, T.M.I. and Amalina, M.A. (2005) The performance of a spark-ignition engine fuelled with natural gas and gasoline. In: ATCi 2005, Conference on Automotive Technology, Dec 6-8, 2005, Putrajaya, Malaysia.

Asqool, Obada and Koting, Suhana and Saifizul, Ahmad (2021) Evaluation of outlier filtering algorithms for accurate travel time measurement incorporating lane-splitting situations. Sustainability, 13 (24). ISSN 2071-1050, DOI https://doi.org/10.3390/su132413851.

Azooz, S.M. and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi and Hamida, B.A. and Khan, S. and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2015) Mode-locked 2 mu m fiber laser with a multi-walled carbon nanotube as a saturable absorber. Chinese Optics Letters, 13 (3). p. 4. ISSN 1671-7694, DOI https://doi.org/10.3788/col201513.030602.

G

Goh, Brandon Han Hoe and Chong, Cheng Tung and Ong, Hwai Chyuan and Milano, Jassinnee and Shamsuddin, Abd Halim and Lee, Xin Jiat and Ng, Jo-Han (2022) Strategies for fuel property enhancement for second-generation multi-feedstock biodiesel. Fuel, 315. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2022.123178.

Gul, Mustabshirha and Zulkifli, Nurin Wahidah Mohd and Kalam, Md Abul and Masjuki, Haji Hassan and Mujtaba, Muhammad Abbas and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and Yusoff, Mohd Nur Ashraf Mohd and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2021.01.033.

I

Imtenan, S. and Masjuki, Haji Hassan and Varman, Mahendra and Arbab, M.I. and Sajjad, H. and Fattah, I.M.R. and Abedin, M.J. and Hasib, Abu Saeed Md. (2014) Emission and performance improvement analysis of biodiesel-diesel blends with additives. Procedia Engineering, 90. 472 - 477. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.759.

J

Jesudason, C.G. (2010) Chemical reaction rate determination I. numerical differential methods. In: International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, 30 Jun - 3 July 2010, Sao Jose Dos Campos, Brazil. (Submitted)

Jesudason, C.G. (2010) Chemical reaction rate determination II. numerical PIPD integral method. In: International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, 30 Jun - 3 July 2010, Sao Jose Dos Campos, Brazil. (Submitted)

K

Kosai, Shoki and Zakaria, Sazalina and Che, Hang Seng and Hasanuzzaman, Md. and Abd Rahim, Nasrudin and Tan, Chiakwang and Ahmad, Radin Diana R. and Abbas, Ahmad Rosly and Nakano, Katsuyuki and Yamasue, Eiji and Woon, Wei Kian and Amer, Ammar Harith Ahmad (2022) Estimation of greenhouse gas emissions of petrol, biodiesel and battery electric vehicles in Malaysia based on life cycle approach. Sustainability, 14 (10). ISSN 2071-1050, DOI 0.3390/su14105783.

L

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Fattah, I.M.R. and Hazrat, M.A. and Varman, Mahendra and Mofijur, M. and Shahabuddin, M. (2013) Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. Procedia Engineering, 56. pp. 583-590. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2013.03.163.

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, M. (2012) Impact of biodiesel on injector deposit formation. In: 5th Regional Conference on New and Renewable Energy (RCNRE 2012), 26-27 September 2012, Hanoi, Vietnam.

Liu, Jianyong and Fauziah, Shahul Hamid and Zhong, Li and Jiang, Jiahao and Zhu, Gaojun and Yan, Mi (2022) Conversion of kitchen waste effluent to H-2-rich syngas via supercritical water gasification: Parameters, process optimization and Ni/Cu catalyst. Fuel, 314. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2021.123042.

M

Mahmood, Muhammad Syarafi and Khairuddin, Uswah and Khairuddin, Anis Salwa Mohd (2021) Vehicles trajectories analysis using Piecewise-Segment Dynamic Time Warping (PSDTW). Advances in Intelligent Systems and Computing, 1350 A. pp. 214-223. ISSN 2194-5357,

Mojumder, Md Rayid Hasan and Antara, Fahmida Ahmed and Hasanuzzaman, Md. and Alamri, Basem and Alsharef, Mohammad (2022) Electric vehicle-to-grid (V2G) technologies: Impact on the power grid and battery. Sustainability, 14 (21). ISSN 2071-1050, DOI https://doi.org/10.3390/su142113856.

Muzir, Nur Ayeesha Qisteena and Mojumder, Md Rayid Hasan and Hasanuzzaman, Md. and Selvaraj, Jeyraj (2022) Challenges of electric vehicles and their prospects in Malaysia: A comprehensive review. Sustainability, 14 (14). ISSN 2071-1050, DOI https://doi.org/10.3390/su14148320.

N

Nasiri, Hossein and Delprete, Cristiana and Brusa, Eugenio and Razavykia, Abbas and Esmaeilzadeh, Alireza (2022) Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition. Proceedings Of The Institution Of Mechanical Engineers Part J-journal Of Engineering Tribology, 236 (6). pp. 1113-1122. ISSN 1350-6501, DOI https://doi.org/10.1177/13506501211047783.

R

Raja Abdul Aziz, R.S. (2011) Preference of University students towards cycling in campus. In: Proceedings of Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Ramasamy, Navin and Kalam, Md. Abul and Varman, Mahendra and Teoh, Yew Heng (2021) Comparative Studies of Piston Crown Coating with YSZ and Al2O3┬ĚSiO2 on Engine out Responses Using Conventional Diesel and Palm Oil Biodiesel. Coatings, 11 (8). p. 885. ISSN 2079-6412, DOI https://doi.org/10.3390/coatings11080885.

Ramasamy, Navin and Kalam, Md. Abul and Varman, Mahendra and Teoh, Yew Heng (2021) Effect of Thermal Barrier Coating on the Performance and Emissions of Diesel Engine Operated with Conventional Diesel and Palm Oil Biodiesel. Coatings, 11 (6). p. 692. ISSN 2079-6412, DOI https://doi.org/10.3390/coatings11060692.

Razak, M.S.A. and Othman, M.N. and Sulaiman, S.N. and Ramli, Rahizar and Sanada, Y. (2021) Composite optimization of automotive carbon fiber strut bar using hyperworks optistruct. In: 1st International Recent Trends in Technology, Engineering and Computing Conference, IRTTEC 2020, 30 September 2020, Kuala Lumpur, Virtual.

Razzaq, L. and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Ahmed, Waqar and Fayaz, H. and Bashir, Shahid and Fattah, I. M. Rizwanul and Ong, Hwai Chyuan and Shahapurkar, Kiran and Afzal, Asif and Wageh, S. and Al-Ghamdi, Ahmed and Ali, Muhammad Shujaat and EL-Seesy, Ahmed (2021) Engine performance and emission characteristics of palm biodiesel blends with graphene oxide nanoplatelets and dimethyl carbonate additives. Journal of Environmental Management, 282. ISSN 0301-4797, DOI https://doi.org/10.1016/j.jenvman.2020.111917.

Roy, Hridoy and Roy, Bimol Nath and Hasanuzzaman, Md. and Islam, Md. Shahinoor and Abdel-Khalik, Ayman S. and Hamad, Mostaf S. and Ahmed, Shehab (2022) Global advancements and current challenges of electric vehicle batteries and their prospects: A comprehensive review. Sustainability, 14 (24). ISSN 2071-1050, DOI https://doi.org/10.3390/su142416684.

S

Saidur, R. and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy consumption, energy savings and emission analysis for industrial motors. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Khan, Mohammad Mahmudur Rahman and Arbab, M.I. and Imtenan, S. and Sanjid, A. (2014) Comparative study of biodiesel, GTL fuel and their blends in context of engine performance and exhaust emission. Procedia Engineering, 90. 466 - 471. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.758.

Sekaran, Sivadas Chandra and Yap, Hwa Jen and Musa, Siti Nurmaya and Liew, Kan Ern and Tan, Chee Hau and Aman, Atikah (2021) The implementation of virtual reality in digital factory-a comprehensive review. The International Journal of Advanced Manufacturing Technology, 115 (5-6). pp. 1349-1366. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-021-07240-x.

Sharouny, H. and Omar, R. (2014) Iatrogenic aspiration of custom-made keel: A case report. Iranian Red Crescent Medical Journal, 16 (12).

Shrivastava, Prashant and Soon, Tey Kok and Bin Idris, Mohd Yamani Idna and Mekhilef, Saad and Adnan, Syed Bahari Ramadzan Syed (2022) Model-based state of X estimation of lithium-ion battery for electric vehicle applications. International Journal of Energy Research, 46 (8, SI). pp. 10704-10723. ISSN 0363-907X, DOI https://doi.org/10.1002/er.7874.

Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Safaei, Mohammad Reza and Afzal, Asif and Raju, Dhana and Ahmed, Waqar and Banapurmath, N. R. and Hossain, Nazia and Bashir, Shahid and Badruddin, Irfan Anjum and Goodarzi, Marjan and Shahapurkar, Kiran and Taqui, Syed Noeman (2021) Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics. Energy, 215 (A). ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2020.119094.

T

Tousizadeh, Mahdi and Yazdani, Amirmehdi and Che, Hang Seng and Wang, Hai and Mahmoudi, Amin and Abd Rahim, Nasrudin (2023) A generalized fault tolerant control based on back EMF feedforward compensation: Derivation and application on induction motors drives. Energies, 16 (1). ISSN 1996-1073, DOI https://doi.org/10.3390/en16010051.

V

Varman, M. and Masjuki, Haji Hassan and Cheah, M.Y. and Cheng, Y.H. and Kalam, M.A. and Liaquat, A.M. and Shahabuddin, M. and Mofijur, M. (2012) Storage stability of biofuel. In: 2012 International Symposium on Energy Technology and Strategy, 22-24 November 2012, Tainan, Taiwan.

Y

Yuen, C.W. and Tan, A.Y. and Abdullah, A.S. and Karim, M.R. (2011) Time headway study on exclusive motorcycle lane. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Z

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14237206.

This list was generated on Fri Dec 8 20:22:49 2023 +08.