Browse by Journal

Abnisa, Faisal and Sharuddin, Shafferina Dayana Anuar and Zanil, Mohd Fauzi and Daud, Wan Mohd Ashri Wan and Indra Mahlia, Teuku Meurah (2019) The Yield Prediction of Synthetic Fuel Production from Pyrolysis of Plastic Waste by Levenberg–Marquardt Approach in Feedforward Neural Networks Model. Polymers, 11 (11). p. 1853. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11111853.

Abouloula, Cheyma Naceur and Rizwan, Muhammad. and Selvanathan, Vidhya and Yahya, Rosiyah and Althubeiti, Khaled and Alkhammash, Hend I. and Akhtaruzzaman, Md. and Oueriagli, A. (2021) Transformation of oil palm waste-derived cellulose into solid polymer electrolytes: Investigating the crucial role of plasticizers. Polymers, 13 (21). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13213685.

Ahmad, Ahmad Fahad and Ab Aziz, Sidek and Obaiys, Suzan Jabbar and Zaid, Mohd Hafiz Mohd and Matori, Khamirul Amin and Samikannu, Kanagesan and Aliyu, Umar Sa'as (2020) Biodegradable Poly (lactic acid)/Poly (ethylene glycol) reinforced multi-walled Carbon Nanotube Nanocomposite fabrication, characterization, properties, and applications. Polymers, 12 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym12020427.

Ahmad Ruzaidi, Dania Adila and Mahat, Mohd Muzamir and Shafiee, Saiful Arifin and Mohamed Sofian, Zarif and Mohmad Sabere, Awis Sukarni and Ramli, Rosmamuhamadani and Osman, Hazwanee and Hamzah, Hairul Hisham and Zainal Ariffin, Zaidah and Sadasivuni, Kishor Kumar (2021) Advocating electrically conductive scaffolds with low immunogenicity for biomedical applications: A review. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193395.

Alamgeer, Muhammad and Tahir, Muhammad R. and Sarker, Mahidur and Ali, Shabina and Hussian, Shahid and Ali, Sajad and Imran Khan, Muhammad and Khan, Dil Nawaz and Ali, Rashid and Said, Suhana Mohd (2023) Polyaniline/ZnO hybrid nanocomposite: Morphology, spectroscopy and optimization of ZnO concentration for photovoltaic applications. Polymers, 15 (2). ISSN 20734360, DOI https://doi.org/10.3390/polym15020363.

Ali, Alamry and Andriyana, Andri and Hassan, Shukur Bin Abu and Ang, Bee Chin (2021) Fabrication and thermo-electro and mechanical properties evaluation of helical multiwall carbon nanotube-carbon fiber/epoxy composite laminates. Polymers, 13 (9). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13091437.

Ali, Nur Eeda and Abidin, Siti Zafirah Zainal and Majid, Siti Rohana and Jaafar, Nor Kamal (2021) Role of Mg(NO3)(2) as defective agent in ameliorating the electrical conductivity, structural and electrochemical properties of agarose-based polymer electrolytes. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193357.

Almoustafa, Hassan A. and Alshawsh, Mohammed Abdullah and Al-Suede, Fouad Saleih R. and Alshehade, Salah Abdulrazak and Majid, Amin Malik Shah Abdul and Chik, Zamri (2023) The chemotherapeutic efficacy of hyaluronic acid coated polymeric nanoparticles against breast cancer metastasis in female NCr-Nu/Nu nude mice. Polymers, 15 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15020284.

Alsolieman, Hamad Abdullah and Babalghaith, Ali Mohammed and Memon, Zubair Ahmed and Al-Suhaibani, Abdulrahman Saleh and Milad, Abdalrhman (2021) Evaluation and comparison of mechanical properties of polymer-modified asphalt mixtures. Polymers, 13 (14). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13142282.

Ananzeh, Hammam M. and Ramli, Rahizar and Julai, Sabariah and Muthalif, Asan G.A. (2024) Mechanical Properties Comparison of Isotropic vs. Anisotropic Hybrid Magnetorheological Elastomer-Fluid. Polymers, 16 (9). p. 1215. ISSN 2073-4360, DOI https://doi.org/10.3390/polym16091215.

Asnawi, Ahmad S. F. M. and Aziz, Shujahadeen B. and Brevik, Iver and Brza, Mohamad A. and Yusof, Yuhanees M. and Alshehri, Saad M. and Ahamad, Tansir and Kadir, Mohd Fakhrul Zamani Abdul (2021) The study of plasticized sodium ion conducting polymer blend electrolyte membranes based on chitosan/dextran biopolymers: Ion transport, structural, morphological and potential stability. Polymers, 13 (3). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13030383.

Azha, Muhammad A. S. and Dannoun, Elham M. A. and Aziz, Shujahadeen B. and Kadir, Mohd F. Z. and Zaki, Zaki Ismail and El-Bahy, Zeinhom M. and Sulaiman, Mazdida and Nofal, Muaffaq M. (2021) High cyclability energy storage device with optimized hydroxyethyl cellulose-dextran-based polymer electrolytes: Structural, electrical and electrochemical investigations. Polymers, 13 (20). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13203602.

Aziz, Shujahadeen B. and Asnawi, Ahmad S. F. M. and Kadir, Mohd Fakhrul Zamani and Alshehri, Saad M. and Ahamad, Tansir and Yusof, Yuhanees M. and Hadi, Jihad M. (2021) Structural, electrical and electrochemical properties of glycerolized biopolymers based on chitosan (CS): Methylcellulose (MC) for energy storage application. Polymers, 13 (8). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13081183.

Aziz, Shujahadeen B. and Brevik, Iver and Hamsan, Muhamad H. and Brza, M. A. and M. Nofal, Muaffaq and Abdullah, Aziz M. and Rostam, Sarkawt and Al-Zangana, Shakhawan and Muzakir, Saiful K. and Kadir, Mohd F. Z. (2020) Compatible solid polymer electrolyte based on methyl cellulose for energy storage application: Structural, electrical, and electrochemical properties. Polymers, 12 (10). ISSN 2073-4360, DOI https://doi.org/10.3390/polym12102257.

Aziz, Shujahadeen B. and Brza, M. A. and Brevik, Iver and Hamsan, M. H. and Abdulwahid, Rebar T. and Majid, S. R. and Kadir, M. F. Z. and Hussen, Sarkawt A. and M. Abdullah, Ranjdar (2020) Characteristics of glycerolized chitosan: NH4NO3-Based polymer electrolyte for energy storage devices with extremely high specific capacitance and energy density over 1000 cycles. Polymers, 12 (11). ISSN 2073-4360, DOI https://doi.org/10.3390/polym12112718.

Aziz, Shujahadeen B. and Dannoun, Elham M. A. and Hamsan, Muhamad H. and Ghareeb, Hewa O. and Nofal, Muaffaq M. and Karim, Wrya O. and Asnawi, Ahmad S. F. M. and Hadi, Jihad M. and Abdul Kadir, Mohd Fakhrul Zamani (2021) A polymer blend electrolyte based on CS with enhanced ion transport and electrochemical properties for electrical double layer capacitor applications. Polymers, 13 (6). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13060930.

Aziz, Shujahadeen B. and Nofal, Muaffaq M. and Abdulwahid, Rebar T. and O. Ghareeb, Hewa and Dannoun, Elham M. A. and M. Abdullah, Ranjdar and Hamsan, M. H. and Kadir, M. F. Z. (2021) Plasticized sodium-ion conducting pva based polymer electrolyte for electrochemical energy storage-eec modeling, transport properties, and charge-discharge characteristics. Polymers, 13 (5). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13050803.

Azzahari, A.D. and Yusuf, S.N.F. and Selvanathan, V. and Yahya, R. (2016) Artificial neural network and response surface methodology modeling in ionic conductivity predictions of phthaloylchitosan-based gel polymer electrolyte. Polymers, 8 (2). p. 22. ISSN 2073-4360, DOI https://doi.org/10.3390/polym8020022.

B. Aziz, Shujahadeen and Brza, Mohamad A. and Brevik, Iver and Hafiz, Muhamad H. and Asnawi, Ahmad S. F. M. and Yusof, Yuhanees M. and Abdulwahid, Rebar T. and Kadir, Mohd F. Z. (2020) Blending and Characteristics of Electrochemical Double-Layer Capacitor Device Assembled from Plasticized Proton Ion Conducting Chitosan:Dextran:NH(4)PF(6)Polymer Electrolytes. Polymers, 12 (9). ISSN 20734360, DOI https://doi.org/10.3390/POLYM12092103.

Badawi, Nujud M. M. and Bhatia, Mamta and Ramesh, Subramaniam and Ramesh, Kasi and Kuniyil, Mufsir and Shaik, Mohammed Rafi and Khan, Mujeeb and Shaik, Baji and Adil, Syed E. F. (2023) Self-healing, flexible and smart 3D hydrogel electrolytes based on alginate/PEDOT:PSS for supercapacitor applications. Polymers, 15 (3). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15030571.

Baharin, S.N.A. and Sarih, N.M. and Mohamad, S. (2016) Novel functionalized polythiophene-coated Fe3O4 nanoparticles for magnetic solid-phase extraction of phthalates. Polymers, 8 (5). p. 117. ISSN 2073-4360, DOI https://doi.org/10.3390/polym8050117.

Basik, Ann Anni and Nanthini, Jayaram and Yeo, Tiong Chia and Sudesh, Kumar (2021) Rubber degrading strains: Microtetraspora and dactylosporangium. Polymers, 13 (20). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13203524.

Birniwa, Abdullahi Haruna and Mahmud, Habibun Nabi Muhammad Ekramul and Abdullahi, Shehu Sa'ad and Habibu, Shehu and Jagaba, Ahmad Hussaini and Ibrahim, Mohamad Nasir Mohamad and Ahmad, Akil and Alshammari, Mohammed B. and Parveen, Tabassum and Umar, Khalid (2022) Adsorption behavior of methylene blue cationic dye in aqueous solution using polypyrrole-polyethylenimine nano-adsorbent. Polymers, 14 (16). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14163362.

Brza, Mohamad A. and Aziz, Shujahadeen B. and Nofal, Muaffaq M. and Saeed, Salah R. and Al-Zangana, Shakhawan and Karim, Wrya O. and Hussen, Sarkawt A. and Abdulwahid, Rebar T. and Kadir, Mohd Fakhrul Zamani (2020) Drawbacks of Low Lattice Energy Ammonium Salts for Ion-Conducting Polymer Electrolyte Preparation: Structural, Morphological and Electrical Characteristics of CS:PEO:NH4BF4-Based Polymer Blend Electrolytes. Polymers, 12 (9). ISSN 20734360, DOI https://doi.org/10.3390/POLYM12091885.

Chai, Yi Ding and Pang, Yean Ling and Lim, Steven and Chong, Woon Chan and Lai, Chin Wei and Abdullah, Ahmad Zuhairi (2021) Role of oil palm empty fruit bunch-derived cellulose in improving the sonocatalytic activity of silver-doped titanium dioxide. Polymers, 13 (20). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13203530.

Chiangraeng, Natthiti and Armstrong, Michael and Manokruang, Kiattikhun and Lee, Vannajan Sanghiran and Jiranusornkul, Supat and Nimmanpipug, Piyarat (2021) Characteristic structural knowledge for morphological identification and classification in meso-scale simulations using principal component analysis. Polymers, 13 (16). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13162581.

Dannoun, Elham M. A. and Aziz, Shujahadeen B. and Abdullah, Sozan N. and Nofal, Muaffaq M. and Mahmoud, Khaled H. and Murad, Ary R. and Abdullah, Ranjdar M. and Kadir, Mohd. F. Z. (2021) Characteristics of plasticized lithium ion conducting green polymer blend electrolytes based on cs: Dextran with high energy density and specific capacitance. Polymers, 13 (21). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13213613.

Fadilah, Nur Izzah Md and Isa, Isma Liza Mohd and Zaman, Wan Safwani Wan Kamarul and Tabata, Yasuhiko and Fauzi, Mh Busra (2022) The effect of nanoparticle-incorporated natural-based biomaterials towards cells on activated pathways: A systematic review. Polymers, 14 (3). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14030476.

Farhana, Nur Khuzaimah and Omar, Fatin Saiha and Mohamad Saidi, Norshahirah and Ling, Goh Zhi and Bashir, Shahid and Subramaniam, Ramesh and Kasi, Ramesh and Iqbal, Javed and Wageh, Swelm and Algarni, Hamed and Al-Sehemi, Abdullah G. (2022) Modification of DSSC based on polymer composite gel electrolyte with copper oxide nanochain by shape effect. Polymers, 14 (16). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14163426.

Farooq, Umar and Ali, Muhammad Umair and Hussain, Shaik Javeed and Ahmad, Muhammad Shakeel and Zafar, Amad and Ghafoor, Usman and Subhani, Tayyab (2021) Improved ablative properties of nanodiamond-reinforced carbon fiber-epoxy matrix composites. Polymers, 13 (13). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13132035.

Genasan, Krishnamurithy and Mehrali, Mohammad and Veerappan, Tarini and Talebian, Sepehr and Malliga Raman, Murali and Singh, Simmrat and Swamiappan, Sasikumar and Mehrali, Mehdi and Kamarul, Tunku and Balaji Raghavendran, Hanumantha Rao (2021) Calcium-Silicate-incorporated Gellan-Chitosan induced osteogenic differentiation in mesenchymal stromal cells. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193211.

Gunathilake, T.M.S.U. and Ching, Yern Chee and Chuah, Cheng Hock (2017) Enhancement of Curcumin Bioavailability Using Nanocellulose Reinforced Chitosan Hydrogel. Polymers, 9 (12). p. 64. ISSN 2073-4360, DOI https://doi.org/10.3390/polym9020064.

Habib, Syahir and Iruthayam, Anastasia and Abd Shukor, Mohd Yunus and Alias, Siti Aisyah and Smykla, Jerzy and Yasid, Nur Adeela (2020) Biodeterioration of Untreated Polypropylene Microplastic Particles by Antarctic Bacteria. Polymers, 12 (11). ISSN 2073-4360, DOI https://doi.org/10.3390/polym12112616.

Hamsan, Muhamad Hafiz and Halim, Norhana Abdul and Demon, Siti Zulaikha Ngah and Sa'aya, Nurul Syahirah Nasuha and Abdul Kadir, Mohd Fakhrul Zamani and Zainal Abidin, Zul Hazrin and Poad, Nursaadah Ahmad and Abu Kasim, Nurul Farhana and Razali, Nur Amira Mamat and Aziz, Shujahadeen B. and Ahmad, Khairol Amali and Miskon, Azizi and Nor, Norazman Mohamad (2022) Multifunction web-like polymeric network bacterial cellulose derived from SCOBY as both electrodes and electrolytes for pliable and low-cost supercapacitor. Polymers, 14 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14153196.

Hamsan, Muhamad Hafiz and Nofal, Muaffaq M. and Aziz, Shujahadeen B. and Brza, M. A. and Dannoun, Elham M. A. and Murad, Ary R. and Abdul Kadir, Mohd Fakhrul Zamani and Muzakir, S. K. (2021) Plasticized polymer blend electrolyte based on chitosan for energy storage application: structural, circuit modeling, morphological and electrochemical properties. Polymers, 13 (8). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13081233.

Haniffa, M.A.C.M. and Ching, Yern Chee and Chuah, Cheng Hock and Kuan, Y.C. and Liu, D.S. and Liou, N.S. (2017) Synthesis, Characterization and the Solvent Effects on Interfacial Phenomena of Jatropha Curcas Oil Based Non-Isocyanate Polyurethane. Polymers, 9 (12). p. 162. ISSN 2073-4360, DOI https://doi.org/10.3390/polym9050162.

Hasan, Khadija and Bashir, Shahid and T. Subramaniam, Ramesh and Kasi, Ramesh and Kamran, Kashif and Iqbal, Javed and Algarni, Hamed and Al-Sehemi, Abdullah G. and Wageh, S. and Pershaanaa, M. and Kamarulazam, Fathiah (2022) Poly (vinyl alcohol)/Agar hydrogel electrolytes based flexible all-in-one supercapacitors with conducting polyaniline/polypyrrole electrodes. Polymers, 14 (21). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14214784.

Herliana, Heri and Yusuf, Harmas Yazid and Laviana, Avi and Wandawa, Ganesha and Cahyanto, Arief (2023) Characterization and analysis of chitosan-gelatin composite-based biomaterial effectivity as local hemostatic agent: A systematic review. Polymers, 15 (3). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15030575.

Hosen, Md. Akter and Shammas, Mahaad Issa and Shill, Sukanta Kumer and Al-Deen, Safat and Jumaat, Mohd Zamin and Hashim, Huzaifa (2022) Ductility enhancement of sustainable fibrous-reinforced high-strength lightweight concrete. Polymers, 14 (4). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14040727.

Hussein, Siti Nurliyana Che Mohamed and Amir, Zulhelmi and Mohamad Jan, Badrul Hisham and Khalil, Munawar and Azizi, Azlinda (2022) Colloidal stability of CA, SDS and PVA coated Iron Oxide Nanoparticles (IONPs): Effect of molar ratio and salinity. Polymers, 14 (21). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14214787.

Ikram, Rabia and Mohamed Jan, Badrul and Abdul Qadir, Muhammad and Sidek, Akhmal and Stylianakis, Minas M. and Kenanakis, George (2021) Recent advances in chitin and chitosan/graphene-based bio-nanocomposites for energetic applications. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193266.

Iqbal, Javed and Numan, Arshid and Ansari, Mohammad Omaish and Jafer, Rashida and Jagadish, Priyanka R. and Bashir, Shahid and Hasan, P. M. Z. and Bilgrami, Anwar L. and Mohamad, Sharifah and Ramesh, K. and Ramesh, S. (2020) Cobalt oxide nanograins and silver nanoparticles decorated fibrous polyaniline nanocomposite as battery-type electrode for high performance supercapattery. Polymers, 12 (12). ISSN 2073-4360, DOI https://doi.org/10.3390/polym12122816.

Jafer, Rashida and Alsufyani, Sarah A. A. and Iqbal, Javed and Ansari, Mohammad Omaish and Numan, Arshid and Bashir, Shahid and Hasan, P. M. Z. and Wageh, S. (2023) Silver decorated and Graphene Wrapped Polypyrrole@Ni(OH)(2) quaternary nanocomposite for high performance energy storage devices. Polymers, 15 (5). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15051267.

Kallumottakkal, Muhammed and Hussein, Mousa I. and Haik, Yousef and Abdul Latef, Tarik Bin (2021) Functionalized-CNT polymer composite for microwave and electromagnetic shielding. Polymers, 13 (22). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13223907.

Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Rahimian Koloor, Seyed Saeid and Bushroa, Abdul Razak and Yahya, Mohd Yazid and Tamin, Mohd Nasir (2019) Assessment of Compressive Mechanical Behavior of Bis-GMA Polymer Using Hyperelastic Models. Polymers, 11 (10). p. 1571. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11101571.

Kaur, Navjot and Somasundram, Chandran and Razali, Zuliana and Mourad, Abdel-Hamid I. and Hamed, Fathalla and Ahmed, Zienab F. R. (2024) Aloe vera/chitosan-based edible film with enhanced antioxidant, antimicrobial, thermal, and barrier properties for sustainable food preservation. Polymers, 16 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym16020242.

Liu, Jingjing and Naeem, Muhammad Awais and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Shasmin, Hanie Nadia and Arifin, Nooranida and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2023) Effect of infill parameters on the compressive strength of 3d-printed nylon-based material. Polymers, 15 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15020255.

Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13152543.

Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Yusoff and Bayraktar, Emin (2021) Experimental Analysis of Heat-Affected Zone (HAZ) in Laser Cutting of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites. Polymers, 13 (5). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13050706.

Masoud, Fathi and Sapuan, S. M. and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2020) Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12 (6). ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM12061332.

Musa, Suleiman Gani and Aljunid Merican, Zulkifli Merican and Akbarzadeh, Omid (2021) Study on selected metal-organic framework-based catalysts for cycloaddition reaction of CO2 with epoxides: A highly economic solution for carbon capture and utilization. Polymers, 13 (22). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13223905.

Myat, Lwin Phone and Ahmad, Muhammad Shakeel and Pulidindi, Indra Neel and Algarni, Hamed and Kumar, Laveet and Kalam, Abul and Wageh, S. and Pandey, Adarsh Kumar and Akbar, Altaf and Selvaraj, Jeyraj (2022) Effect of polyethylene glycol and activated carbon macroparticles on thermal conductivity of paraffin wax for thermal storage applications. Polymers, 14 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14194181.

Ng, Kelvin Wei Shan and Azari, Pedram and Nam, Hui Yin and Xu, Feng and Pingguan-Murphy, Belinda (2019) Electrospin-Coating of Paper: A Natural Extracellular Matrix Inspired Design of Scaffold. Polymers, 11 (4). p. 650. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11040650.

Parveez, Bisma and Kittur, Mohammed Ibrahim and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Umarfarooq, M. A. (2022) Scientific advancements in composite materials for aircraft applications: A review. Polymers, 14 (22). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14225007.

Prihandana, Gunawan Setia and Sriani, Tutik and Muthi'ah, Aisyah Dewi and Musa, Siti Nurmaya and Jamaludin, Mohd Fadzil and Mahardika, Muslim (2022) Antibacterial activity of silver nanoflake (SNF)-blended polysulfone ultrafiltration membrane. Polymers, 14 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14173600.

Radwan, Mohammed K. H. and Lee, Foo Wei and Woon, Yoke Bee and Yew, Ming Kun and Mo, Kim Hung and Wai, Soon Han (2021) A study of the strength performance of peat soil: A modified cement-based stabilization agent using fly ash and polypropylene fiber. Polymers, 13 (23). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13234059.

Razali, Zuliana and Somasundram, Chandran and Nurulain, Siti Zalifah and Kunasekaran, Wijenthiran and Alias, Matthew Raj (2021) Postharvest quality of cherry tomatoes coated with mucilage from dragon fruit and irradiated with UV-C. Polymers, 13 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13172919.

Rohayzi, Nurul Farhana and Katman, Herda Yati and Ibrahim, Mohd Rasdan and Norhisham, Shuhairy and Abd Rahman, Noorhazlinda (2023) Potential additives in natural rubber-modified bitumen: A review. Polymers, 15 (8). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15081951.

Rozila, Ismail and Azari, Pedram and Munirah, Sha'ban and Wan Safwani, Wan Kamarul Zaman and Pingguan-Murphy, Belinda and Chua, Kien Hui (2021) Polycaprolactone-based scaffolds facilitates osteogenic differentiation of human adipose-derived stem cells in a co-culture system. Polymers, 13 (4). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13040597.

Ruzaidi, Dania Adila Ahmad and Mahat, Mohd Muzamir and Sofian, Zarif Mohamed and Hashim, Nikman Adli Nor and Osman, Hazwanee and Nawawi, Mohd Azizi and Ramli, Rosmamuhamadani and Jantan, Khairil Anuar and Aizamddin, Muhammad Faiz and Azman, Hazeeq Hazwan and Chang, Yee Hui Robin and Hamzah, Hairul Hisham (2021) Synthesis and characterization of porous, electro-conductive chitosan-gelatin-agar-based PEDOT: PSS scaffolds for potential use in tissue engineering. Polymers, 13 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13172901.

Salem, Ayman Mustafa. H. and Ali, Abdelrahman and Ramli, Rahizar and Muthalif, Asan Gani Abdul and Julai, Sabariah (2022) Effect of carbonyl iron particle types on the structure and performance of magnetorheological elastomers: A frequency and strain dependent study. Polymers, 14 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14194193.

Salim, Mohammad Rizalmazli and Widodo, Riyanto Teguh and Noordin, Mohamed Ibrahim (2021) Proof-of-concept of detection of counterfeit medicine through polymeric materials analysis of plastics packaging. Polymers, 13 (13). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13132185.

Selvanathan, Vidhya and Yahya, Rosiyah and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman and Amin, Nowshad and Nour, Majid and Sindi, Hatem and Rawa, Muhyaddin and Akhtaruzzaman, Md. (2020) Organosoluble Starch-Cellulose Binary Polymer Blend as a Quasi-Solid Electrolyte in a Dye-Sensitized Solar Cell. Polymers, 12 (3). p. 516. ISSN 2073-4360, DOI https://doi.org/10.3390/polym12030516.

Shahapurkar, Kiran and Chenrayan, Venkatesh and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Shahapurkar, Pavan and Elfasakhany, Ashraf and Mujtaba, Muhammad Abbas and Siddiqui, Md Irfanul Haque and Ali, Masood Ashraf and Mahlia, Teuku Meurah Indra (2021) Leverage of environmental pollutant crump rubber on the dry sliding wear response of epoxy composites. Polymers, 13 (17). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13172894.

Shahapurkar, Kiran and Chenrayan, Venkatesh and Tesfamarium, Belay Brehane and Soudagar, Manzoore Elahi M. and Hossain, Nazia and A. Rajhi, Ali and Alamri, Sagr and Alarifi, Ibrahim M. and Shahapurkar, Pavan and Mujtaba, M. A. and Kiran, M. C. and Sayeed Ahmed, Gulam Mohammed (2021) Parametric analysis of epoxy/crumb rubber composite by using taguchi-GRA hybrid technique. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193441.

Singh, Jasbir and Ching, Yern Chee and Abdullah, Luqman Chuah and Ching, Kuan Yong and Razali, Shaifulazuar and Gan, Seng Neon (2018) Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology. Polymers, 10 (3). p. 338. ISSN 2073-4360, DOI https://doi.org/10.3390/polym10030338.

Tan, Rachel Yie Hang and Lee, Choy Sin and Pichika, Mallikarjuna Rao and Cheng, Sit Foon and Lam, Ki Yan (2022) PH responsive polyurethane for the advancement of biomedical and drug delivery. Polymers, 14 (9). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14091672.

Tan, Shiou Xuan and Andriyana, Andri and Lim, Steven and Ong, Hwai Chyuan and Pang, Yean Ling and Ngoh, Gek Cheng (2021) Rapid Ultrasound-Assisted Starch Extraction from Sago Pith Waste (SPW) for the Fabrication of Sustainable Bioplastic Film. Polymers, 13 (24). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13244398.

Tan, Shiou Xuan and Andriyana, Andri and Ong, Hwai Chyuan and Lim, Steven and Pang, Yean Ling and Ngoh, Gek Cheng (2022) A comprehensive review on the emerging roles of nanofillers and plasticizers towards sustainable starch-based bioplastic fabrication. Polymers, 14 (4). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14040664.

Tan, Shiou Xuan and Ong, Hwai Chyuan and Andriyana, Andri and Lim, Steven and Pang, Yean Ling and Kusumo, Fitranto and Ngoh, Gek Cheng (2022) Characterization and parametric study on mechanical properties enhancement in biodegradable chitosan-reinforced starch-based bioplastic film. Polymers, 14 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14020278.

Tang, Pui Mun and Habib, Syahir and Abd Shukor, Mohd Yunus and Alias, Siti Aisyah and Smykla, Jerzy and Yasid, Nur Adeela (2023) Evaluation of the deterioration of untreated commercial polystyrene by Psychrotrophic Antarctic Bacterium. Polymers, 15 (8). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15081841.

Teo, Kim Teck and Hassan, Aziz Amir and Gan, Seng Neon (2018) UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate. Polymers, 10 (12). p. 1374. ISSN 2073-4360, DOI https://doi.org/10.3390/polym10121374.

Thien, Gregory Soon How and Chan, Kah-Yoong and Marlinda, Ab Rahman (2023) The Role of Polymers in Halide Perovskite Resistive Switching Devices. Polymers, 15 (5). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15051067.

Vakili, Mohammadtaghi and Amouzgar, Parisa and Cagnetta, Giovanni and Wang, Baozhen and Guo, Xiaogang and Mojiri, Amin and Zeimaran, Ehsan and Salamatinia, Babak (2019) Ultrasound-Assisted Preparation of Chitosan/Nano-Activated Carbon Composite Beads Aminated with (3-Aminopropyl)Triethoxysilane for Adsorption of Acetaminophen from Aqueous Solutions. Polymers, 11 (10). p. 1701. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11101701.

Vitus, Vieralynda and Ibrahim, Fatimah and Zaman, Wan Safwani Wan Kamarul (2021) Modelling of stem cells microenvironment using carbon-based scaffold for tissue engineering application :A review. Polymers, 13 (23). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13234058.

Whba, Rawdah and Su'ait, Mohd Sukor and Lee, Tian Khoon and Ibrahim, Salmiah and Mohamed, Nor Sabirin and Ahmad, Azizan (2021) Free-Radical Photopolymerization of Acrylonitrile Grafted onto Epoxidized Natural Rubber. Polymers, 13 (4). p. 660. ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM13040660.

Widodo, Riyanto Teguh and Hassan, Aziz and Liew, Kai Bin and Ming, Long Chiau (2022) A directly compressible pregelatinised sago starch: A new excipient in the pharmaceutical tablet formulations. Polymers, 14 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14153050.

Wong, Sok Kuan and Wong, Yew Hoong and Chin, Kok-Yong and Ima-Nirwana, Soelaiman (2021) A review on the enhancement of calcium phosphate cement with biological materials in bone defect healing. Polymers, 13 (18). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13183075.

Yang, Jianlei and Ching, Yern Chee and Chuah, Cheng Hock and Liou, Nai-Shang (2020) Preparation and characterization of starch/empty fruit bunch-based bioplastic composites reinforced with epoxidized oils. Polymers, 13 (1). p. 94. ISSN 2073-4360, DOI https://doi.org/10.3390/polym13010094.

Yeoh, Fang Hoong and Lee, Choy Sin and Kang, Yew Beng and Wong, Shew Fung and Cheng, Sit Foon and Ng, Wei Seng (2020) Production of Biodegradable Palm Oil-Based Polyurethane as Potential Biomaterial for Biomedical Applications. Polymers, 12 (8). p. 1842. ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM12081842.

Yew, Chee Hong and Azari, Pedram and Choi, Jane and Muhamad, Farina and Pingguan-Murphy, Belinda (2018) Electrospun Polycaprolactone Nanofibers as a Reaction Membrane for Lateral Flow Assay. Polymers, 10 (12). p. 1387. ISSN 2073-4360, DOI https://doi.org/10.3390/polym10121387.

Zhang, Qiang and Wang, Po-I. and Ong, Guang Liang and Tan, Shen Hoong and Tan, Zhong Wei and Hii, Yew Han and Wong, Yee Lin and Cheah, Khee Sang and Yap, Seong Ling and Ong, Teng Sian and Tou, Teck Yong and Nee, Chen Hon and Liaw, Der Jang and Yap, Seong Shan (2019) Photophysical and Electroluminescence Characteristics of Polyfluorene Derivatives with Triphenylamine. Polymers, 11 (5). p. 840. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11050840.

Zolkepli, Husna and Widodo, Riyanto Teguh and Mahmood, Syed and Salim, Norazlinaliza and Awang, Khalijah and Ahmad, Noraini and Othman, Rozana (2022) A review on the delivery of plant-based antidiabetic agents using nanocarriers: Current status and their role in combatting hyperglycaemia. Polymers, 14 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14152991.