 | Up a level |
Abbas, Z. and Mehdi, I. and Hasnain, J. and Alzahrani, Abdullah K. and Asma, Mir (2023) Homogeneous-heterogeneous reactions in MHD mixed convection fluid flow between concentric cylinders with heat generation and heat absorption. Case Studies in Thermal Engineering, 42. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102718.
AbdRabbuh, O. Almatar and Kazi, S.N. and Zubir, Mohd Nashrul Mohd and Chowdhury, Zaira Zaman and Abdelrazek, Ali H. (2024) Heat transfer inside annular passages: A comparison of noncircular and fully circular passages using eco-friendly graphene nanofluid. Case Studies in Thermal Engineering, 60. p. 104659. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104659.
Afzal, Asif and Kaladgi, Abdul Razak and Jilte, R. D. and Ibrahim, Muhammad and Kumar, Rahul and Mujtaba, M. A. and Alshahrani, Saad and Saleel, C. Ahamed (2021) Thermal modelling and characteristic evaluation of electric vehicle battery system. Case Studies in Thermal Engineering, 26. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101058.
Ahmed, Waqar and Chowdhury, Zaira Zaman and Kazi, Salim Newaz and Bin Johan, Mohd Rafie and Abdelrazek, Ali H. and Fayaz, H. and Badruddin, Irfan Anjum and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Akram, Naveed and Mehmood, Shahid and Ahmad, Muhammad Shakeel and Kamangar, Sarfaraz and Khan, T. M. Yunus (2021) Experimental evaluation and numerical verification of enhanced heat transportation by using ultrasonic assisted nanofluids in a closed horizontal circular passage. Case Studies in Thermal Engineering, 26. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101026.
Akbar, Noreen Sher and Maraj, E. N. and Noor, N. F. M. and Habib, Muhammad Bilal (2022) Exact solutions of an unsteady thermal conductive pressure driven peristaltic transport with temperature-dependent nanofluid viscosity. Case Studies in Thermal Engineering, 35. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102124.
Ali, Muhammad Shujaat and Anwar, Zahid and Mujtaba, Muhammad Abbas and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Safaei, Mohammad Reza and Iqbal, Asim and Afzal, Asif and Razzaq, Luqman and Khidmatgar, Abdulqhadar and Goodarzi, Marjan (2021) Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels. Case Studies in Thermal Engineering, 23. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2020.100824.
Asadi, Iman and Hashemi, Mohammad and Sajadi, Behrang and Mahyuddin, Norhayati and Baghban, Mohammad Hajmohammadian and Esfandiari, Masoud and Maghfouri, Mehdi and Yan, Kezhen (2023) Evaluating the time lag and decrement factor of mortar and concrete containing OPBC as an agricultural by-product lightweight aggregate. Case Studies in Thermal Engineering, 41 (SI). ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102609.
Cao, Yan and Abbas, Mohamed and El-Shorbagy, M. A. and Gepreel, Khaled A. and Dahari, Mahidzal and Le, Van Vang and Badran, Mohamed Fathy and Huynh, Phat Huy and Wae-hayee, Makatar (2022) Thermo-hydraulic performance in ceramic-made microchannel heat sinks with an optimum fin geometry. Case Studies in Thermal Engineering, 36. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102230.
Cao, Yan and Ayed, Hamdi and Algelany, A. M. and Dahari, Mahidzal and Nguyen, Phuoc Quy Phong and Gepreel, Khaled A. and Nguyen, Van Nhanh and Ehab, Mohamed and Wae-hayee, Makatar (2022) Receiving heat from a PCM tank by using natural convection of water and NEPCM: A simulation for LHTES application. Case Studies in Thermal Engineering, 35. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102123.
Cao, Yan and Ayed, Hamdi and Jarad, Fahd and Togun, Hussein and Alias, Hajar and Issakhov, Alibek and Dahari, Mahidzal and Wae-hayee, Makatar and El Ouni, M. H. (2021) MHD natural convection nanofluid flow in a heat exchanger: Effects of Brownian motion and thermophoresis for nanoparticles distribution. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101394.
Cao, Yan and Ayed, Hamdi and Togun, Hussein and Shawabkeh, Ali and Dahari, Mahidzal and Wae-hayee, Makatar and Mouldi, Abir and Marzouki, Riadh (2021) Heating a cold semi-annulus wall by MHD natural convetion with nanofluid. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101569.
Cao, Yan and Delpisheh, Mostafa and Yousefiasl, Saeed and Athari, Hassan and El-Shorbagy, M. A. and Jarad, Fahd and Dahari, Mahidzal and Wae-hayee, Makatar (2022) Examination and optimization of a novel auxiliary trigeneration system for a ship through waste-to-energy from its engine. Case Studies in Thermal Engineering, 31. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101860.
Cao, Yan and Farouk, Naeim and Ayed, Hamdi and Aly, Ayman A. and Jarad, Fahd and Dahari, Mahidzal and Wae-hayee, Makatar and Saleh, B. (2022) Heat transfer improvement between a pair of heater and cooler inside an energy storage by using nano-encapsulated phase change material/water: A numerical modeling. Case Studies in Thermal Engineering, 30. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101770.
Cao, Yan and Mansir, Ibrahim B. and Mouldi, Abir and Aouaini, Fatma and Bouzgarrou, Souhail M. and Marzouki, Riadh and Dahari, Mahidzal and Wae-hayee, Makatar and Mohamed, Abdullah (2022) Designing a system for battery thermal management: Cooling LIBs by nano-encapsulated phase change material. Case Studies in Thermal Engineering, 33. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101943.
Cao, Yan and Mansir, Ibrahim B. and Mouldi, Abir and Gepreel, Khaled A. and Dahari, M. and Le, Tri Hieu and Badran, Mohamed Fathy and Nguyen, Van Nhanh and Wae-hayee, Makatar (2022) Using natural convection mechanism of nanofluid for cooling an embedded hot plate in corner of a square enclosure: A numerical simulation. Case Studies in Thermal Engineering, 33. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101926.
Dai, Jie and Yue, Gabriel Xiao Guang and Yuan, Qiong and Abed, Azher M. and Mouldi, Abir and Loukil, Hassen and Deifala, Ahmed and Chen, Yong (2024) Financially focused 3E optimization of innovative solar-powered dual-temperature refrigeration systems: Balancing cost-effectiveness with environmental sustainability. Case Studies in Thermal Engineering, 59. p. 104597. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104597.
Das, Likhan and Rubbi, Fazlay and Habib, Khairul and Saidur, R. and Islam, Nazrul and Saha, Bidyut Baran and Aslfattahi, Navid and Irshad, Kashif (2021) Hydrothermal performance improvement of an inserted double pipe heat exchanger with Ionanofluid. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101533.
Du, Gang and Wei, Haoran and Singh, Pradeep Kumar and Dutta, Ashit Kumar and Abdullaeva, Barno Sayfutdinovna and Fouad, Yasser and Alkhalaf, Salem and Alkhayyat, Ahmed and Deifalla, Ahmed (2024) Thermal/econmic/environmental considerations in a multi-geneation layout with a heat recovery process; A multi-attitude optimization based on ANN approach. Case Studies in Thermal Engineering, 55. p. 104170. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104170.
Fayaz, H. and Ramesh, Singh and Raja, Vijayanandh and Linul, Emanoil and Khan, Sher Afghan and Asif, Mohammed and Buradi, Abdulrajak and Samuel, Olusegun David (2024) Temporal numerical analysis of beeswax PCM melting in a cube geometry subjected to a constant wall temperature condition. Case Studies in Thermal Engineering, 56. p. 104273. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104273.
Ghani, Siti Nur Ainsyah and Ul-Haq, Rizwan and Noor, Noor Fadiya Mohd (2023) Engine oil enhanced performance with hybrid graphene-SWCNT nanomaterials over a Riga curvy surface. Case Studies in Thermal Engineering, 45. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102902.
Hai, Tao and Mansir, Ibrahim B. and Alshuraiaan, Bader and Abed, Azher M. and Ali, H. Elhosiny and Dahari, Mahidzal and Albalawi, Hind (2023) Numerical investigation on the performance of a solar air heater using inclined impinging jets on absorber plate with parallel and crossing orientation of nozzles. Case Studies in Thermal Engineering, 45. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102913.
Harari, P. A. and Banapurmath, N. R. and Yaliwal, V. S. and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Mujtaba, M. A. and Safaei, Mohammad Reza and Akram, Naveed and Goodarzi, Marjan and Elfasakhany, Ashraf and EL-Seesy, Ahmed (2021) Experimental investigation on compression ignition engine powered with pentanol and thevetia peruviana methyl ester under reactivity controlled compression ignition mode of operation. Case Studies in Thermal Engineering, 25. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.100921.
Khan, Muhammad Zia Ullah and Younis, M. Yamin and Akram, Naveed and Akbar, Bilal and Rajput, Umair Ahmed and Bhutta, Rumeel Ahmad and Uddin, Emad and Jamil, Muhammad Ahsan and Garcia Marquez, Fausto Pedro and Bin Zahid, Fahad (2021) Investigation of heat transfer in wavy and dual wavy micro-channel heat sink using alumina nanoparticles. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101515.
Le, Huu Son and Galal, Ahmed M. and Alhamrouni, Ibrahim and Aly, Ayman A. and Abbas, Mohamed and Saidi, Abdelaziz Salah and Truong, Thanh Hai and Dahari, Mahidzal and Wae-hayee, Makatar (2022) Heat transfer efficiency optimization of a multi-nozzle micro-channel heat sink utilizing response surface methodology. Case Studies in Thermal Engineering, 37. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102266.
Liang, Xiangbo and Kumar, N. Bharath and Mansir, Ibrahim B. and Singh, Pradeep Kumar and Abed, Azher M. and Dahari, Mahidzal and Nasr, Samia and Albalawi, Hind and Cherif, A. and Wae-hayee, Makatar (2023) Management of heat transfer and hydraulic characteristics of a micro-channel heat sink with various arrangements of rectangular vortex generators utilizing artificial neural network and response surface methodology. Case Studies in Thermal Engineering, 44. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102850.
Sateesh, K. A. and Yaliwal, V. S. and Banapurmath, N. R. and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Harari, P. A. and El-Shafay, A. S. and Mujtaba, M. A. and Elfaskhany, Ashraf and Kalam, M. A. (2023) Effect of MWCNTs nano-additive on a dual-fuel engine characteristics utilizing dairy scum oil methyl ester and producer gas. Case Studies in Thermal Engineering, 42. ISSN 2214157X, DOI https://doi.org/10.1016/j.csite.2022.102661.
Saw, L. H. and Yew, M. C. and Yew, M. K. and Chong, W. T. and Poon, H. M. and Liew, W. S. and Yeo, W. H. (2021) Development of the closed loop pulsating heat pipe cool roof system for residential buildings. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101487.
Sui, Dianjie and Mansir, Ibrahim B. and Gepreel, Khaled A. and Dahari, Mahidzal and Nguyen, Dinh Tuyen and Badran, Mohamed Fathy and Van Nguyen, Nhanh and Wae-hayee, Makatar and Zhan, Mingwang (2022) Free convection to cool a hot square block by embedding in center of a chamber by nanofluid and magnetohydrodynamic. Case Studies in Thermal Engineering, 33. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101980.
Wei, Haoran and Moria, Hazim and Nisar, Kottakkaran Sooppy and Ghandour, Raymond and Issakhov, Alibek and Sun, Yu-Liang and Kaood, Amr and Youshanlouei, Mohammad Mehdizadeh (2021) Effect of volume fraction and size of Al2O3 nanoparticles in thermal, frictional and economic performance of circumferential corrugated helical tube. Case Studies in Thermal Engineering, 25. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.100948.
Wong, H. F. and Ahmad, N. and Siri, Zailan and Noor, N.F.M. (2021) Viscous heating and cooling process in a mixed convection cavity with free-slip effect. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101349.
Wu, Yujia and Mansir, Ibrahim B. and Althobaiti, Ali and Cao, Yan and Dahari, Mahidzal and Nguyen, Dinh Tuyen and Mohamed, Abdullah and Huynh, Phat Huy and Wae-hayee, Makatar (2022) Employing numerical method for evaluating the heat transfer rate of a hot tube by nanofluid natural convection. Case Studies in Thermal Engineering, 35. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.102006.
