Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | F | G | H | I | J | K | L | R | S | T | Y | Z
Number of items: 23.

A

Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Alawi, Omer A. and Muhsan, Ali S. and Sidik, Nor Azwadi Che and Shaikh, Kaleemullah and Khan, Wajahat Ahmed (2024) Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance. Applied Thermal Engineering, 246. p. 122982. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2024.122982.

B

Bardeeniz, Santi and Panjapornpon, Chanin and Fongsamut, Chalermpan and Ngaotrakanwiwat, Pailin and Hussain, Mohamed Azlan (2024) Digital twin-aided transfer learning for energy efficiency optimization of thermal spray dryers: Leveraging shared drying characteristics across chemicals with limited data. Applied Thermal Engineering, 242. p. 122431. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2024.122431.

C

Cao, Yan and Mihardjo, Leonardus W. W. and Dahari, Mahidzal and Mohamed, Abdeliazim Mustafa and Ghaebi, Hadi and Parikhani, Towhid (2021) Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation. Applied Thermal Engineering, 184. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.116177.

Cao, Yan and Mihardjo, Leonardus W. W. and Dahari, Mahidzal and Tlili, Iskander (2021) Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison. Applied Thermal Engineering, 182. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.116117.

F

Fauzi, H. and Metselaar, H.S.C. and Mahlia, T.M.I. and Silakhori, M. and Ong, H.C. (2015) Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications. Applied Thermal Engineering, 80. pp. 127-131. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.047.

G

Gan, Yong Yang and Ong, Hwai Chyuan and Ling, Tau Chuan and Zulkifli, Nurin Wahidah Mohd and Wang, Chin Tsan and Yang, Yung Chin (2018) Thermal conductivity optimization and entropy generation analysis of titanium dioxide nanofluid in evacuated tube solar collector. Applied Thermal Engineering, 145. pp. 155-164. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2018.09.012.

Ganesan, Poo Balan and Zaib, Fathiah and Tuan Zahari, Tuan Zaharinie and Mobedi, Moghtada and Gnanasekaran, N. (2023) Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM). Applied Thermal Engineering, 218. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.119336.

H

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.079.

Hooman, K. and Sauret, E. and Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2014.10.067.

Huq, Tahsinul and Ong, Hwai Chyuan and Chew, Bee Teng and Leong, Kin Yuen and Kazi, Salim Newaz (2022) Review on aqueous graphene nanoplatelet nanofluids: preparation, Stability, thermophysical properties, and applications in heat exchangers and solar thermal collectors. Applied Thermal Engineering, 210. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.118342.

I

Ijam, A. and Saidur, Rahman (2012) Nanofluid as a coolant for electronic devices (cooling of electronic devices). Applied Thermal Engineering, 32. pp. 76-82. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2011.08.032.

J

Jahirul, M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jayed, M.H. and Wazed, M.A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.05.037.

K

Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311,

Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2010) Mineral scale formation and mitigation on metals and a polymeric heat exchanger surface. Applied Thermal Engineering, 30 (14-15). pp. 2236-2242.

Kumar, L. Harish and Kazi Md., Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (SI). ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2021.116916.

L

Leong, K.Y. and Saidur, Rahman and Kazi, S.N. and Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.07.019.

R

Rahmanian, B. and Safaei, M.R. and Kazi, S.N. and Ahmadi, G. and Oztop, H.F. and Vafai, K. (2014) Investigation of pollutant reduction by simulation of turbulent non-premixed pulverized coal combustion. Applied Thermal Engineering, 73 (1). pp. 1222-1235.

S

Sadeghinezhad, Emad and Akhiani, Amir Reza and Metselaar, Hendrik Simon Cornelis and Tahan Latibari, Sara and Mehrali, Mehdi and Mehrali, Mohammad (2020) Parametric study on the thermal performance enhancement of a thermosyphon heat pipe using covalent functionalized graphene nanofluids. Applied Thermal Engineering, 175. p. 115385. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.115385.

Sarsam, Wail Sami and Kazi, Salim Newaz and Badarudin, Ahmad (2020) Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of graphene nanoplatelets with different specific surface areas. Applied Thermal Engineering, 172. p. 115142. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.115142.

T

Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saidur, Rahman and Faizul, M.S. and Niza Mohamad, E. (2007) Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering, 27 (8-9). pp. 1363-1370. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2006.10.024.

Y

Yau, Y.H. and Ahmadzadehtalatapeh, M. (2010) A review on the application of horizontal heat pipe heat exchangers in air conditioning systems in the tropics. Applied Thermal Engineering, 30 (2-3). pp. 77-84.

Yousefi, M. and Darus, A.N. and Yousefi, M. and Hooshyar, D. (2015) Multi-stage thermal-economical optimization of compact heat exchangers: A new evolutionary-based design approach for real-world problems. Applied Thermal Engineering, 83. pp. 71-80. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.03.011.

Z

Zaharin, Muhammad Syarifuddin Mohamed and Abdullah, Nik Rosli and Masjuki, Haji Hassan and Ali, Obed Majeed and Najafi, Gholamhassan and Yusaf, Talal (2018) Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine. Applied Thermal Engineering, 144. pp. 960-971. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2018.08.057.

This list was generated on Wed Dec 4 19:36:57 2024 +08.