Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Number of items at this level: 1044.

Article

Abas, W.A.B.W. (1995) Stress stabilization behaviors in skin under small tensile loads in-Vitro. Bio-Medical Materials and Engineering, 5 (2). pp. 59-63. ISSN 0959-2989

Abas, W.A.B.W.; Barbenel, J.C. (1982) Uniaxial tension test of human-skin invivo. Journal of Biomedical Engineering, 4 (1). pp. 65-71. ISSN 0141-5425

Abd Aziz, N.; Musa, G.; Sulaiman, A. (2010) The influence of predictors on travel web site adoption among Malaysian travellers. African Journal of Marketing Management, 2 (6). pp. 107-122.

Abd Rashid, A.F.; Yusoff, S. (2015) A review of life cycle assessment method for building industry. Renewable & Sustainable Energy Reviews, 45. pp. 244-248. ISSN 1364-0321

Abd Razak, N.A.; Abu Osman, N.A.; Ali, S.; Gholizadeh, H.; Abas, W.A.B.W. (2015) Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35 (2). pp. 100-105. ISSN 0208-5216

Abd Razak, N.A.; Abu Osman, N.A.; Kamyab, M.; Wan Abas, W.A.B.; Gholizadeh, H. (2014) Satisfaction and problems experienced with wrist movements: comparison between a common body-powered prosthesis and a new biomechatronics prosthesis. American Journal of Physical Medicine and Rehabilitation. ISSN 0894-9115

Abd Razak, N.A.; Abu Osman, N.A.; Wan Abas, W.A. (2013) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology, 8 (3). pp. 255-260. ISSN 1748-3107

Abd Sukor, J.; Mohktar, M.S.; Redmond, S.J.; Lovell, N.H. (2015) Signal quality measures on pulse oximetry and blood pressure signals acquired from self-measurement in a home environment. IEEE Journal of Biomedical and Health Informatics, 19 (1). pp. 102-108. ISSN 2168-2194

Abdollahi, Y.; Sairi, N.A.; Aroua, M.K.; Masoumi, H.R.F.; Jahangirian, H.; Alias, Y. (2015) Fabrication modeling of industrial CO2 ionic liquids absorber by artificial neural networks. Journal of Industrial and Engineering Chemistry, 25. pp. 168-175. ISSN 1226-086X

Abdolvand, H.; Sohrabi, H.; Faraji, G.; Yusof, F. (2015) A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes. Materials Letters, 143. pp. 167-171. ISSN 0167-577X

Abdul Murad, M.H.S. (2013) Academic Right 101: an introduction in a Malaysian context. Academic Right 101: An Introduction in a Malaysian Context, 55 (2). pp. 105-110.

Abdul Rahim, H.; Ibrahim, F.; Taib, M.N. (2010) System identification of nonlinear autoregressive models in monitoring dengue infection. International Journal on Smart Sensing and Intelligent Systems, 3 (4). pp. 783-806. ISSN 11785608

Abdul Rahim, H.; Taib, M.N.; Ibrahim, F.; Abdul Rahim, Z. (2011) Bioelectrical impedance analysis device: measurement of bioelectrical tissue conductivity in dengue patients. Sensors and Transducers, 125 (2). pp. 256-265. ISSN 17265479 (ISSN)

Abdul Sani, S.F.; Grime, G.W.; Palitsin, V.; Mahdiraji, G.A.; Abdul Rashid, H.A.; Maah, M.J.; Bradley, D.A. (2015) Micro-PIXE analysis of doped SiO2 fibres intended as TL dosimeters for radiation measurements. X-Ray Spectrometry, 44 (2). pp. 33-40. ISSN 0049-8246

Abdul-Kareem, S.; Baba, S.; Wahid, M.I.A. (2000) Research in medical informatics. Health Informatics Journal, 6 (2). pp. 110-115. ISSN 1460-4582

Abdul-Kareem, S.; Baba, S.; Zubairi, Y.Z.; Prasad, U.; Wahid, M.I.A. (2002) Prognostic Systems for NPC: A comparison of the Neural Network Model and The Cox Proportional Hazards Model. Advances in Neural Network World.

Abdul-Kareem, S.; Baba, S.; Zubairi, Y.Z.; Wahid, M.I.A. (2000) ANN as a tool for medical prognosis. Health Informatics Journal, 6 (3). pp. 162-165. ISSN 1460-4582

Abdul-Rahman, -; Wang, C.; Rahim, A.M.; Loo, S.C.; Miswan, N. (2014) Vertical greenery systems (VGS) in urban tropics. Open House International, 39 (4). pp. 42-52.

Abdulalla, S.M.; Kiah, L.M.; Zakaria, O. (2010) A biological model to improve PE malware detection: review. International Journal of Physical Sciences, 5 (15). pp. 2236-2247. ISSN 1992-1950

Abdullah, N.; Elsheikh, M.H.; Ibrahim, N.M.J.N.; Said, S.M.; Sabri, M.F.M.; Hassan, M.H.; Marlina, A. (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. Rsc Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069

Abeyrathna, P.H.A.S.; Zainab, A.N. (2004) The status of reading habit and interests among secondary school children in Sri Lanka. Malaysian Journal of Library @ Information Science, 9 (2). pp. 107-121.

Abidin, N.I.Z.; Da Forno, A.; Bestetti, M.; Martin, D.; Beer, A.; Atrens, A. (2015) Evaluation of coatings for Mg alloys for biomedical applications. Advanced Engineering Materials, 17 (1). pp. 58-67. ISSN 1438-1656

Abnisa, F.; Daud, W.M.A.W. (2015) Optimization of fuel recovery through the stepwise co-pyrolysis of palm shell and scrap tire. Energy Conversion and Management, 99. pp. 334-345. ISSN 0196-8904

Abo-Hamad, A.; Hayyan, M.; AlSaadi, M.A.; Hashim, M.A. (2015) Potential applications of deep eutectic solvents in nanotechnology. Chemical Engineering Journal, 273. pp. 551-567. ISSN 1385-8947

Abomhara, M.; Khalifa, O.O.; Zaidan, A.A.; Zaidan, B.B.; Zakaria, O.; Gani, A. (2011) An experiment of scalable video security solution using H. 264/AVC and advanced encryption standard (AES): selective cryptography. International Journal of the Physical Sciences, 6 (16). pp. 4053-4063. ISSN 1992-1950

Aboodarda, S.J.; Hamid, M.S.A.; Che Muhamed, A.M.; Ibrahim, F.; Thompson, M. (2013) Resultant muscle torque and electromyographic activity during high intensity elastic resistance and free weight exercises. European Journal of Sport Science, 13 (2). pp. 155-163. ISSN 17461391

Aboodarda, S.J.; Shariff, M.A.H.; Muhamed, A.M.C.; Ibrahim, F.; Yusof, A. (2011) Electromyographic activity and applied load during high intensity elastic resistance and nautilus machine exercises. Journal of Human Kinetics, 30 (1). pp. 5-12. ISSN 1640-5544

Abramian, M.; Lovell, N.H.; Morley, J.W.; Suaning, G.J.; Dokos, S. (2015) Activation and inhibition of retinal ganglion cells in response to epiretinal electrical stimulation: A computational modelling study. Journal of Neural Engineering, 12 (1). 016002. ISSN 1741-2560

Abramowicz, H.; Abt, I.; Adamczyk, L.; Adamus, M.; Antonelli, S.; Antonioli, P.; Antonov, A.; Arneodo, M.; Aushev, V.; Aushev, Y.; Bachynska, O.; Bamberger, A.; Barakbaev, A.N.; Barbagli, G.; Bari, G.; Barreiro, F.; Bartsch, D.; Basile, M.; Behnke, O.; Behr, J.; Behrens, U.; Bellagamba, L.; Bertolin, A.; Bhadra, S.; Bindi, M.; Blohm, C.; Bold, T.; Boos, E.G.; Borodin, M.; Borras, K.; Boscherini, D.; Bot, D.; Boutle, S.K.; Brock, I.; Brownson, E.; Brugnera, R.; Bruemmer, N.; Bruni, A.; Bruni, G.; Brzozowska, B.; Bussey, P.J.; Butterworth, J.M.; Bylsma, B.; Caldwell, A.; Capua, M.; Carlin, R.; Catterall, C.D.; Chekanov, S.; Chwastowski, J.; Ciborowski, J.; Ciesielski, R.; Cifarelli, L.; Cindolo, F.; Contin, A.; Cooper-Sarkar, A.M.; Coppola, N.; Corradi, M.; Corriveau, F.; Costa, M.; D'Agostini, G.; Dal Corso, F.; de Favereau, J.; del Peso, J.; Dementiev, R.K.; De Pasquale, S.; Derrick, M.; Devenish, R.C.E.; Dobur, D.; Dolgoshein, B.A.; Doyle, A.T.; Drugakov, V.; Durkin, L.S.; Dusini, S.; Eisenberg, Y.; Ermolov, P.F.; Eskreys, A.; Fang, S.; Fazio, S.; Ferrando, J.; Ferrero, M.I.; Figiel, J.; Forrest, M.; Fourletov, S.; Galas, A.; Gallo, E.; Garfagnini, A.; Geiser, A.; Gialas, I.; Gladilin, L.K.; Gladkov, D.; Glasman, C.; Gogota, O.; Golubkov, Y.A.; Goettlicher, P.; Grabowska-Bold, I.; Grebenyuk, J.; Gregor, I.; Grigorescu, G.; Grzelak, G.; Gwenlan, C.; Haas, T.; Hain, W.; Hamatsu, R.; Hart, J.C.; Hartmann, H.; Hartner, G.; Hilger, E.; Hochman, D.; Holm, U.; Hori, R.; Horton, K.; Huettmann, A.; Ibrahim, Z.A.; Iga, Y.; Ingbir, R.; Ishitsuka, M.; Jakob, H.P.; Januschek, F.; Jimenez, M.; Jones, T.W.; Juengst, M.; Kadenko, I.; Kahle, B.; Kamaluddin, B.; Kananov, S.; Kanno, T.; Karshon, U.; Karstens, F.; Katkov, I.I.; Kaur, M.; Kaur, P.; Keramidas, A.; Khein, L.A.; Kim, J.Y.; Kisielewska, D.; Kitamura, S.; Klanner, R.; Klein, U.; Koffeman, E.; Kollar, D.; Kooijman, P.; Korol, I.; Kotanski, A.; Koetz, U.; Kowalski, H.; Kulinski, P.; Kuprash, O.; Kuze, M.; Kuzmin, V.A.; Lee, A.; Levchenko, B.B.; Levy, A.; Libov, V.; Limentani, S.; Ling, T.Y.; Lisovyi, M.; Lohmann, W.; Loehr, B.; Lohrmann, E.; Loizides, J.H.; Long, K.R.; Longhin, A.; Lontkovskyi, D.; Lukasik, J.; Lukina, O.Y.; Luzniak, P.; Maeda, J.; Magill, S.; Makarenko, I.; Malka, J.; Mankel, R.; Margotti, A.; Marini, G.; Martin, J.F.; Mastroberardino, A.; Matsumoto, T.; Mattingly, M.C.K.; Idris, F.M.; Monaco, V.; Montanari, A.; Morris, J.D.; Musgrave, B.; Nagano, K.; Namsoo, T.; Nania, R.; Nicholass, D.; Nigro, A.; Ning, Y.; Noor, U.; Notz, D.; Nowak, R.J.; Oh, B.Y.; Okazaki, N.; Oliver, K.; Olkiewicz, K.; Ota, O.; Papageorgiu, K.; Paul, E.; Pawlak, J.M.; Pawlik, B.; Pelfer, P.G.; Pellegrino, A.; Perlanski, W.; Perrey, H.; Piotrzkowski, K.; Plucinski, P.; Pokrovskiy, N.S.; Polini, A.; Proskuryakov, A.S.; Raval, A.; Reeder, D.D.; Reisert, B.; Ren, Z.; Ri, Y.D.; Robertson, A.; Roloff, P.; Ron, E.; Rubinsky, I.; Ruspa, M.; Sacchi, R.; Salii, A.; Samson, U.; Sartorelli, G.; Savin, A.A.; Saxon, D.H.; Schioppa, M.; Schleper, P.; Schmidke, W.B.; Schonberg, V.; Schwartz, J.; Sciulli, F.; Shcheglova, L.M.; Shehzadi, R.; Shimizu, S.; Singh, I.; Skillicorn, I.O.; Slominski, W.; Smith, W.H.; Sola, V.; Solano, A.; Solomin, A.; Son, D.; Sosnovtsev, V.; Spiridonov, A.; Stadie, H.; Stanco, L.; Stern, A.; Stewart, T.P.; Stifutkin, A.; Stopa, P.; Suchkov, S.; Susinno, G.; Suszycki, L.; Sztuk, J.; Szuba, D.; Szuba, J.; Tapper, A.D.; Tassi, E.; Terron, J.; Theedt, T.; Tiecke, H.; Tokushuku, K.; Tomalak, O.; Tomaszewska, J.; Tsurugai, T.; Turcato, M.; Tymieniecka, T.; Vazquez, M.; Verbytskyi, A.; Viazlo, V.; Vlasov, N.N.; Volynets, O.; Walczak, R.; Abdullah, W.A.T.W.; Whitmore, J.J.; Whyte, J.; Wing, M.; Wlasenko, M.; Wolf, G.; Wolfe, H.; Wrona, K.; Yamada, S.; Yamazaki, Y.; Yoshida, R.; Youngman, C.; Zarnecki, A.F.; Zenaiev, O.; Zhautykov, B.O.; Zhmak, N.; Zhou, C.; Zichichi, A.; Zolko, M.; Zotkin, D.S.; Collaboration, ZEUS (2010) Scaled momentum spectra in deep inelastic scattering at HERA. Journal of High Energy Physics (6).

Abrizah, A.; Noorhidawati, A.; Kiran, K. (2010) Global visibility of Asian universities' open access institutional repositories. Malaysian Journal of Library & Information Science, 15 (3). pp. 53-73. ISSN 1394-6234

Abrizah , A.; Zainab, A.N. (2005) Internet usage and information seeking behaviour of students conducting history projects: Determining the need of a digital library for historical resources. Jurnal Persatuan Pustakawan Malaysia, 1. pp. 1-19.

Abu Bakar, N.; Chee, C.Y.; Abdullah, L.C.; Ratnam, C.T.; Ibrahim, N.A. (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials & Design, 65. pp. 204-211. ISSN 0261-3069

Acharya, U.R.; Faust, O.; Molinari, F.; Sree, S.V.; Junnarkar, S.P.; Sudarshan, V. (2015) Ultrasound-based tissue characterization and classification of fatty liver disease: A screening and diagnostic paradigm. Knowledge-Based Systems, 75. pp. 66-77. ISSN 0950-7051

Acharya, U.R.; Molinari, F.; Sree, S.V.; Swapna, G.; Saba, L.; Guerriero, S.; Suri, J.S. (2015) Ovarian tissue characterization in ultrasound: A Review. Technology in Cancer Research & Treatment, 14 (3). pp. 251-261. ISSN 1533-0338

Acharya, U.R.; Ng, E.Y.K.; Eugene, L.W.J.; Noronha, K.P.; Min, L.C.; Nayak, K.P.; Bhandary, S.V. (2015) Decision support system for the glaucoma using Gabor transformation. Biomedical Signal Processing and Control, 15. pp. 18-26. ISSN 1746-8094

Acharya, U.R.; Sree, S.V.; Molinari, F.; Saba, L.; Nicolaides, A.; Suri, J.S. (2015) An automated technique for carotid far wall classification using grayscale features and wall thickness variability. Journal of Clinical Ultrasound, 43 (5). pp. 302-311. ISSN 0091-2751

Acharya, U.R.; Sudarshan, V.K.; Adeli, H.; Santhosh, J.; Koh, J.E.W.; Adeli, A. (2015) Computer-aided diagnosis of depression using EEG signals. European Neurology, 73 (5-6). pp. 329-336. ISSN 0014-3022

Acharya, U.R.; Sudarshan, V.K.; Ghista, D.N.; Lim, W.J.E.; Molinari, F.; Sankaranarayanan, M. (2015) Computer-aided diagnosis of diabetic subjects by heart rate variability signals using discrete wavelet transform method. Knowledge-Based Systems, 81. pp. 56-64.

Afshar Ghotli, R.; Abdul Aziz, A.R.; Ibrahim, S.; Baroutian, S.; Arami-Niya, A. (2013) Study of various curved-blade impeller geometries on power consumption in stirred vessel using response surface methodology. Journal of the Taiwan Institute of Chemical Engineers, 44 (2). pp. 192-201. ISSN 18761070

Afshar Ghotli, R.; Raman, A.A.A.; Ibrahim, S.; Baroutian, S. (2013) Liquid-liquid mixing in stirred vessels: a review. Chemical Engineering Communications, 200 (5). pp. 595-627. ISSN 1563-5201

Ahmad, A.; Salim, S.S.; Zainuddin, R. (2008) A cognitive tool to support mathematical communication in fraction word problem solving. WSEAS Transactions on Computers, 7 (4). ISSN 1109-2750

Ahmad, M.; Aziz, A.R.A. (2015) Elemental distribution and porosity enhancement in advanced nano bimetallic catalyst. Powder Technology, 280. pp. 42-52. ISSN 0032-5910

Ahmad, Z.; Abdullah, S.M.; Zafar, Q.; Sulaiman, K. (2014) Investigation of charge transport in organic polymer donor/acceptor photovoltaic materials. Journal of Modern Optics, 61 (21, SI). pp. 1730-1734. ISSN 0950-0340

Ahmed, M.A.; Kiah, M.L.M.; Zaidan, B.B.; Zaidan, A.A. (2010) A novel embedding method to increase capacity and robustness of low-bit encoding audio steganography technique using noise gate software logic algorithm. Journal of Applied Science, 10 (1). pp. 59-64. ISSN 1812-5654

Ahmed, M.H.M.; Ali, N.M.; Salleh, Z.S.; Rahman, A.A.; Harun, S.W.; Manaf, M.; Arof, H. (2015) Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber. Optics and Laser Technology, 65. pp. 25-28. ISSN 0030-3992

Ahmed, M.M.; Huda, A.S.N.; Isa, N.A.M. (2015) Recursive construction of output-context fuzzy systems for the condition monitoring of electrical hotspots based on infrared thermography. Engineering Applications of Artificial Intelligence, 39. pp. 120-131. ISSN 0952-1976

Ahmed, S.; Hassan, M. (2002) Action plans for implementation of total productive maintenance. International Journal of Engineering Science & Technology, 2 (1). pp. 51-68.

Ahmed, T.; Mekhilef, S. (2015) Semi-Z-source inverter topology for grid-connected photovoltaic system. IET Power Electronics, 8 (1). pp. 63-75. ISSN 1755-4535

Ahsan, M.R.; Islam, M.T.; Ullah, M.H. (2015) Computational and experimental analysis of high gain antenna for WLAN/WiMAX applications. Journal of Computational Electronics, 14 (2). pp. 634-641. ISSN 1569-8025

Ahsan, M.R.; Islam, M.T.; Ullah, M.H. (2015) A new low-profile inverted A-shaped patch antenna for multi-band operations. Wireless Personal Communications, 81 (2). pp. 519-529. ISSN 0929-6212

Ahsan, M.R.; Islam, M.T.; Ullah, M.H. (2015) A new meandered-stripline fed dual band patch antenna. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 213-221. ISSN 1054-4887

Ahsan, M.R.; Islam, M.T.; Ullah, M.H.; Singh, M.J.; Ali, M.T. (2015) Metasurface reflector (MSR) loading for high performance small microstrip antenna design. Plos One, 10 (5). p. 20. ISSN 1932-6203

Ai-Ling, Y. (2009) Continuous professional development for librarians. Jurnal Persatuan Pustakawan Malaysia, 3. pp. 1-12.

Ajeel, M.A.; Aroua, M.K.; Daud, W.M.A.W. (2015) P-Benzoquinone anodic degradation by carbon black diamond composite electrodes. Electrochimica Acta, 169. pp. 46-51. ISSN 0013-4686

Ajeel, M.A.; Aroua, M.K.; Daud, W.M.A.W. (2015) Preparation and characterization of carbon black diamond composite electrodes for anodic degradation of phenol. Electrochimica Acta, 153. pp. 379-384. ISSN 0013-4686

Akib, S.; Rahman, S.; Shamshirband, S.; Petkovic, D. (2015) Soft computing methodologies for estimation of bridge girder forces with perforations under tsunami wave loading. Bulletin of Earthquake Engineering, 13 (3). pp. 935-952. ISSN 1570-761X

Akter, M.P.; Mekhilef, S.; Tan, N.M.L.; Akagi, H. (2015) Model predictive control of bidirectional AC-DC converter for energy storage system. Journal of Electrical Engineering & Technology, 10 (1). pp. 165-175. ISSN 1975-0102

Akter, M.P.; Mekhilef, S.; Tan, N.M.L.; Akagi, H. (2015) Stability and performance investigations of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems. Journal of Power Electronics, 15 (1). pp. 202-215. ISSN 1598-2092

Akter, P.; Uddin, M.; Mekhilef, S.; Tan, N.M.L.; Akagi, H. (2015) Model predictive control of bidirectional isolated DC–DC converter for energy conversion system. International Journal of Electronics, 102 (8). pp. 1407-1427. ISSN 1362-3060

Al Mahmud, K.A.H.; Kalam, M.A.; Masjuki, H.H.; Mobarak, H.M.; Zulkifli, N.W.M. (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40 (2). pp. 90-118. ISSN 1040-8436

Al Mamun, A.; Ahmed, Y.M.; AlKhatib, M.F.R.; Jameel, A.T.; AlSaadit, M. (2015) Lead sorption by carbon nanofibers grown on powdered activated carbon - kinetics and equilibrium. Nano, 10 (2). p. 8. ISSN 1793-2920

Al-Bakri, S.H.; Mat Kiah, M.L. (2010) A novel peer-to-peer SMS security solution using a hybrid technique of NTRU and AES-Rijndael. Scientific Research and Essays, 5 (22). pp. 3455-3466. ISSN 1992-2248

Al-Bakri, S.H.; Mat Kiah, M.L.; Zaidan, A.A.; Zaidan, B.B.; Alam, G.M. (2011) Securing peer-to-peer mobile communications using public key cryptography: New security strategy. International Journal of the Physical Sciences, 6 (4). pp. 930-938. ISSN 1992-1950

Al-Faqheri, W.; Ibrahim, F.; Thio, T.H.G.; Aeinehvand, M.M.; Arof, H.; Madou, M. (2015) Development of novel passive check valves for the microfluidic CD platfor. Sensors and Actuators a-Physical, 222. pp. 245-254. ISSN 0924-4247

Al-Faqheri, W.; Ibrahim, F.; Thio, T.H.G.; Bahari, N.; Arof, H.; Rothan, H.A.; Yusof, R.; Madou, M. (2015) Development of a passive liquid valve (PLV) utilizing a pressure equilibrium phenomenon on the centrifugal microfluidic platform. Sensors, 15 (3). pp. 4658-4676. ISSN 1424-8220

Al-Faqheri, W.; Ibrahim, F.; Thio, T.H.G.; Moebius, J.; Joseph, K.; Arof, H.; Madou, M. (2013) Vacuum/Compression Valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform. PLoS One, 8 (3). e58523. ISSN 1932-6203

Al-Frajat, A.K.; Jalab, H.A.; Kasirun, Z.M.; Zaidan, A.A.; Zaidan, B.B. (2010) Hiding data in video file: an overview. J. Appl. Sci, 10 (15). pp. 1644-1649. ISSN 1812-5654

Al-Saeedi, S.; Sarhan, A.A.D.; Bushroa, A.R. (2015) Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach. Tribology Transactions, 58 (2). pp. 240-246. ISSN 1040-2004

Alam, G.M.; Mat Kiah, M.L.; Zaidan, B.B.; Zaidan, A.A.; Alanazi, H.O. (2010) Using the features of mosaic image and AES cryptosystem to implement an extremely high rate and high secure data hidden: analytical study. Scientific Research and Essays, 5 (21). pp. 3254-3260. ISSN 1992-2248

Alam, G.M.; Oloruntegbe, O.K.; Oluwatelure, A.T.; Alake, E.M.; Ayeni, A.E. (2010) Is 3D just an addition of 1 to 2 or is it more enhancing than 2D visualizations? Scientific Research and Essays, 5 (12). pp. 1536-1539. (In Press)

Alam, M.A.; Jumaat, M.Z. (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025

Alanazi, H.; Noor, R.M.; Zaidan, B.B.; Zaidan, A.A. (2010) Intrusion detection system: overview. Journal of Computing, 2 (2). pp. 130-133. ISSN 2151-9617

Alanazi, H.O.; Mat Kiah, M.L.; Zaidan, A.A.; Zaidan, B.B.; Alam, G.M. (2010) Secure topology for electronic medical record transmissions. International Journal of Pharmacology, 6 (6). pp. 954-958. ISSN 1811-7775

Alanazi, H.O.; Noor, R.M. (2010) The guide of implementing chat protocol: study case on using the socket programming concept and object-oriented programming. Journal of Computing, 2 (10). pp. 18-26. ISSN 2151-9617

Alavi, S.M.A.; Safaei, M.R.; Mahian, O.; Goodarzi, M.; Yarmand, H.; Dahari, M.; Wongwises, S. (2015) A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank. Numerical Heat Transfer Part B-Fundamentals, 68 (2). pp. 169-183. ISSN 1040-7790

Alawiah, A.; Alina, M.S.; Bauk, S.; Abdul-Rashid, H.A.; Gieszczyk, W.; Noramaliza, M.N.; Mandiraji, G.A.; Tamchek, N.; Zulkifli, M.I.; Bradley, D.A.; Marashdeh, M.W. (2015) The thermoluminescence characteristics and the glow curves of Thulium doped silica fiber exposed to 10 MV photon and 21 MeV electron radiation. Applied Radiation and Isotopes, 98. pp. 80-86. ISSN 0969-8043

Alawiah, A.; Bauk, S.; Abdul-Rashid, H.A.; Gieszczyk, W.; Hashim, S.; Mandiraji, G.A.; Tamchek, N.; Bradley, D.A. (2015) Potential application of pure silica optical flat fibers for radiation therapy dosimetry. Radiation Physics and Chemistry, 106. pp. 73-76. ISSN 0969-806X

Alawiah, A.; Bauk, S.; Marashdeh, M.W.; Ng, K.S.; Abdul-Rashid, H.A.; Yusoff, Z.; Gieszczyk, W.; Noramaliza, M.N.; Mahdiraji, G.A.; Tamchek, N.; Muhd-Yassin, S.Z.; Mat-Sharif, K.A.; Zulkifli, M.I.; Maah, M.J.; Omar, S.S.C.; Bradley, D.A. (2015) Thermoluminescence glow curves and deconvoluted glow peaks of Ge doped flat fibers at ultra-high doses of electron radiation. Radiation Physics and Chemistry, 113. pp. 53-58. ISSN 0969-806X

Albatsh, F.M.; Ahmad, S.; Mekhilef, S.; Mokhlis, H.; Hassan, M.A. (2015) Optimal placement of unified power flow controllers to improve dynamic voltage stability using power system variable based voltage stability indices. Plos One, 10 (4). p. 32. ISSN 1932-6203

Ale Ebrahim, N. (2013) Introduction to the research tools mind map. Research World, 10 (4). pp. 1-3. ISSN 0974-2379

Ale Ebrahim, N. (2012) Virtual R&D teams definition. Nader Ale Ebrahim's White Papers, 1 (1). pp. 1-2.

Ale Ebrahim, N. (2015) Virtual R&D teams: A new model for product development. International Journal of Innovation, 3 (2). pp. 1-27. ISSN 2318-9975

Ale Ebrahim, N.; Abdul Rashid, S.H.; Ahmed, S.; Taha, Z. (2011) The effectiveness of virtual R&D teams in SMEs: experiences of Malaysian SMEs. Industrial Engineering and Management Systems, 10 (2). pp. 109-114. ISSN 1598-7248

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2012) Effective virtual teams for new product development. Scientific Research and Essay, 7 (21). pp. 1971-1985. ISSN 1992-2248

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2012) Technology use in the virtual R&D teams. American Journal of Engineering and Applied Sciences, 5 (1). pp. 9-14. ISSN 1793-8244

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z.; Mohammadjafari, M. (2012) Process construct in the virtual R&D teams. Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012. pp. 1822-1828.

Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Critical factors for new product developments in SMEs virtual team. African Journal of Business Management, 4 (11). pp. 2247-2257. ISSN 1993-8233

Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Virtual R&D teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management, 4 (11). pp. 2368-2379. ISSN 1993-8233

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Innovation and R&D activities in virtual team. European Journal of Scientific Research, 34 (3). pp. 297-307. ISSN 1450-216X

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Modified stage-gate: a conceptual model of virtual product development process. African Journal of Marketing Management, 1 (9). pp. 211-219. ISSN 1993-8233

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) SMEs, virtual research and development (R&D) teams and new product development: a literature review. International Journal of the Physical Sciences, 5 (7). pp. 916-930. ISSN 1992-1950

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual R&D teams in small and medium enterprises: a literature review. Scientific Research and Essays, 4 (13). pp. 1575-1590. ISSN 1992-2248

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual teams for new product development – an innovative experience for R&D engineers. European Journal of Educational Studies, 1 (3). pp. 109-123. ISSN 19446-6331

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual teams: a literature review. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2653-2669. ISSN 1991-8178

Alhalawani, A.M.F.; Rodriguez, O.; Curran, D.J.; Co, R.; Kieran, S.; Arshad, S.; Keenan, T.J.; Wren, A.W.; Crasto, G.; Peel, S.A.F.; Towler, M.R. (2015) A glass polyalkenoate cement carrier for bone morphogenetic proteins. Journal of Materials Science-Materials in Medicine, 26 (3). p. 151. ISSN 0957-4530

Ali, Azlan-Shah (2010) Design information in managing refurbishment projects in Malaysia. International Journal of the Physical Sciences, 5 (6). pp. 768-773.

Ali, B.S.; Kasirun, Z.M. (2008) Crosscutting concern identification at requirements level. Malaysian Journal of Computer Science, 21 (2). pp. 78-87. ISSN 0127-9084

Ali, B.S.; Kasirun, Z.M.D. (2011) An approach for crosscutting concern identification at requirements level using NLP. International Journal of the Physical Sciences, 6 (11). pp. 2718-2730.

Ali, J.M.; Hoang, N.H.; Hussain, M.A.; Dochain, D. (2015) Review and classification of recent observers applied in chemical process systems. Computers & Chemical Engineering, 76. pp. 27-41. ISSN 0098-1354

Ali, J.M.; Hussain, M.A.; Tade, M.O.; Zhang, J. (2015) Artificial intelligence techniques applied as estimator in chemical process systems - A literature survey. Expert Systems with Applications, 42 (14). pp. 5915-5931. ISSN 0957-4174

Ali, S.; Abu Osman, N.A.; Eshraghi, A.; Gholizadeh, H.; Abd Razak, N.A.B.; Wan Abas, W.A.B. (2013) Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction. Clinical Biomechanics, 28 (9-10). pp. 994-999. ISSN 02680033

Ali, S.; Osman, N.A.A.; Mortaza, N.; Eshraghi, A.; Gholizadeh, H.; Wan Abas, W.A.B. (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033

Alicia Tang, Y.; Zain, S.; Abdul Rahman, N.; Abdullah, R. (2007) An ontology-based reasoning framework for reaction mechanisms simulation. Knowledge Science, Engineering and Management. pp. 18-29.

Alsubari, B.; Shafigh, P.; Jumaat, M.Z. (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944

Amini, H.; Dabbagh, V.; Rezaei, S.M.; Zareinejad, M.; Mardi, N.A.; Sarhan, A.A.D. (2015) Robust control-based linear bilateral teleoperation system without force sensor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (2). pp. 579-587. ISSN 1678-5878

Amini, H.; Rezaei, S.M.; Sarhan, A.A.D.; Akbari, J.; Mardi, N.A. (2015) Transparency improvement by external force estimation in a time-delayed nonlinear bilateral teleoperation system. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 137 (5). p. 15. ISSN 0022-0434

Amir, Z.; Jan, B.M.; Khalil, M.; Wahab, A.K.A.; Hassan, Z. (2015) Rheological behavior and temperature dependency study of Sara line-based super lightweight completion fluid. Journal of Petroleum Science and Engineering, 130. pp. 106-113. ISSN 0920-4105

Amiri, A.; Sadri, R.; Ahmadi, G.; Chew, B.T.; Kazi, S.N.; Shanbedi, M.; Alehashem, M.S. (2015) Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwave-assisted approach for improved heat dissipation. RSC Advances, 5 (45). pp. 35425-35434. ISSN 2046-2069

Amiri, A.; Sadri, R.; Shanbedi, M.; Ahmadi, G.; Chew, B.T.; Kazi, S.N.; Dahari, M. (2015) Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids. Energy Conversion and Management, 92. pp. 322-330. ISSN 0196-8904

Andrews, S.; Palaniappan, R.; Teoh, A.; Chu Kiong, L. (2008) Enhancing P300 component by spectral power ratio principal components for a single trial brain-computer interface. American Journal of Applied Sciences, 5 (6). pp. 639-644. ISSN 1546-9239

Ang, B.C.; Yaacob, I.I.; Wong, Y.H. (2014) Phase and surface area studies of maghemite nanoparticles dispersed in silica gel. Materials Research Innovations, 18 (S6). S6-32-S6-35. ISSN 1432-8917

Ang, T.; Tan, A.W.; Loo, C.; Wong, W. (2012) Wavelet mach filter for omnidirectional human activity recognition. International Journal of Innovative Computing, Information and Control, 8 (5). pp. 3565-3584. ISSN 1349-4198

Anisur, M.R.; Kibria, M.A.; Mahfuz, M.H.; Saidur, R.; Metselaar, I.H.S.C. (2014) Cooling of air using heptadecane phase change material in shell and tube arrangement: Analytical and experimental study. Energy and Buildings, 85. pp. 98-106.

Annuar, M.S.M.; Tan, I.K.P.; Ibrahim, S.; Ramachandran, K.B. (2006) Ammonium uptake and growth kinetics of pseudomonas putida PGA1. Asia-Pacific Journal of Molecular Biology and Biotechnology, 14 (1). pp. 1-10. ISSN 01287451 (ISSN)

Annuar, M.S.M.; Tan, I.K.P.; Ibrahim, S.; Ramachandran, K.B. (2008) A kinetic model for growth and biosynthesis of medium-chain-length poly-(3-hydroxyalkanoates) in Pseudomonas putida. Brazilian Journal of Chemical Engineering, 25 (2). pp. 217-228. ISSN 0104-6632

Annuar, N.Z.M.; Sabri, M.F.M.; Abu Bakar, A.S. (2015) Modeling and simulation of metal organic halide vapor phase epitaxy (MOHVPE) growth chamber. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 21 (1). pp. 309-318. ISSN 0946-7076

Anuar, N.B.; Kuen, L.N.; Zakaria, O.; Gani, A.; Wahab, A.W.A. (2008) GSM mobile SMS/MMS using public key infrastructure: m-PKI. WSEAS Transactions on Computers, 7 (8). pp. 1219-1229. ISSN 1109-2750

Anuar, N.B.; Kuen, L.N.; Zakaria, O.; Gani, A.; Wahab, A.W.A. (2009) Usability and performance of secure mobile messaging: M-PKI. WSEAS Transactions on Information Science and Applications, 6 (2). pp. 179-189. ISSN 1790-0832

Anuar, N.B.; Sallehudin, H.; Gani, A.; Zakari, O. (2008) Identifying false alarm for network intrusion detection system using hybrid data mining and decision tree. Malaysian Journal of Computer Science, 21 (2). pp. 101-115. ISSN 0127-9084

Aprianti, E.; Shafigh, P.; Bahri, S.; Farahani, J.N. (2015) Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74. pp. 176-187. ISSN 0950-0618

Arafat, M.M.; Haseeb, A.S.M.A.; Akbar, S.A. (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4 V particles during thermal oxidation. Ceramics International, 41 (3). pp. 4401-4409. ISSN 0272-8842

Arbab, M.I.; Varman, M.; Masjuki, H.H.; Kalam, M.A.; Imtenan, S.; Sajjad, H.; Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904

Ardi, M.S.; Aroua, M.K.; Hashim, N.A. (2015) Progress, prospect and challenges in glycerol purification process: A review. Renewable & Sustainable Energy Reviews, 42. pp. 1164-1173. ISSN 1364-0321

Arifin, N.; Abu Osman, N.A.; Ali, S.; Gholizadeh, H.; Abas, W.A.W. (2015) Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the biodex (R) stability system. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 229 (7). pp. 491-498. ISSN 0954-4119

Aris, H.; Salim, S.S. (2011) Framework for component model selection. Let Software, 5 (5). pp. 474-486. ISSN 1751-8806

Aris, H.; Salim, S.S. (2008) Issues on the application of component-oriented software development: formulation of research areas. Information Technology Journal, 7 (8). pp. 1149-1155. ISSN 1812-5638

Aris, H.; Salim, S.S. (2011) Properties for component model: the definition perspective. Computing and Informatics, 30 (5). pp. 987-1010. ISSN 1335-9150

Aris, H.; Salim, S.S. (2007) The development of a simplified process model for CBSD. The International Arab Journal of Information Technology, 4 (2). pp. 89-96.

Ariyapala, P.G.; Edzan, N.N. (2002) Foreign postgraduate students and the online catalogue at the University of Malaya library. Malaysian Journal of Library & Information Science, 7 (1). pp. 57-67.

Arumugam, M.S.; Murthy, G.R.; Loo, C.K. (2009) On the optimal control of the steel annealing processes as a two-stage hybrid systems via PSO algorithms. International Journal of Bio-Inspired Computation, 1 (3). pp. 198-209. ISSN 1758-0366

Asadieraghi, M.; Daud, W.M.A.W. (2015) In-situ catalytic upgrading of biomass pyrolysis vapor: Co-feeding with methanol in a multi-zone fixed bed reactor. Energy Conversion and Management, 92. pp. 448-458. ISSN 0196-8904

Asghar, A.; Raman, A.A.A.; Daud, W.M.A.W. (2015) Advanced oxidation processes for in-situ production of hydrogen peroxide/hydroxyl radical for textile wastewater treatment: A review. Journal of Cleaner Production, 87. pp. 826-838. ISSN 0959-6526

Asghar, A.; Raman, A.A.A.; Daud, W.M.A.W. (2015) Challenges and recommendations for using membranes in wastewater-based microbial fuel cells for in situ Fenton oxidation for textile wastewater treatment. Reviews in Chemical Engineering, 31 (1). pp. 45-67. ISSN 0167-8299

Ashik, U.P.M.; Daud, W.M.A.W. (2015) Nanonickel catalyst reinforced with silicate for methane decomposition to produce hydrogen and nanocarbon: Synthesis by co-precipitation cum modified Stober method. RSC Advances, 5 (58). pp. 46735-46748. ISSN 2046-2069

Ashik, U.P.M.; Daud, W.M.A.W.; Abbas, H.F. (2015) Production of greenhouse gas free hydrogen by thermocatalytic decomposition of methane – A review. Renewable and Sustainable Energy Reviews, 44. pp. 221-256. ISSN 1364-0321

Askari, E.; Mehrali, M.; Metselaar, I.H.S.C.; Kadri, N.A.; Rahman, M.M. (2012) Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Askari, E.; Mehrali, M.; Metselaar, I.H.S.C.; Kadri, N.A.; Rahman, M.M. (2012) Fabrication and mechanical properties of functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Aslam, M.; Shafigh, P.; Jumaat, M.Z.; Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618

Atabani, A.E.; Badruddin, I.A.; Masjuki, H.H.; Chong, W.T.; Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025

Atabani, A.E.; Badruddin, I.A.; Mekhilef, S.; Silitonga, A.S. (2011) A review on global fuel economy standards, labels and technologies in the transportation sector. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4586-4610.

Ataollahi, F.; Mohri, M.; Seifi, H.A.; Pingguan-Murphy, B.; Wan Abas, W.A.B.; Osman, N.A.A. (2013) Evaluation of copper concentration in subclinical cases of white muscle disease and its relationship with cardiac troponin I. PLoS ONE, 8 (2). pp. 1-5. ISSN 19326203

Ataollahi, F.; Pramanik, S.; Moradi, A.; Dalilottojari, A.; Pingguan-Murphy, B.; Abas, W.A.W.; Abu Osman, N.A. (2015) Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2203-2213. ISSN 1549-3296

Ayodele, O.B.; Farouk, H.U.; Mohammed, J.; Uemura, Y.; Daud, W.M.A.W. (2015) Effect of precursor acidity on zeolite supported Pd catalyst properties and hydrodeoxygenation activity for the production of biofuel. Journal of Molecular Catalysis a-Chemical, 400. pp. 179-186. ISSN 1381-1169

Ayodele, O.B.; Farouk, H.U.; Mohammed, J.; Uemura, Y.; Daud, W.M.A.W. (2015) Hydrodeoxygenation of oleic acid into n- and iso-paraffin biofuel using zeolite supported fiuoro-oxalate modified molybdenum catalyst: Kinetics study. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 142-152. ISSN 1876-1070

Azari, P.; Luan, N.S.; Gan, S.N.; Yahya, R.; Wong, C.S.; Chua, K.H.; Pingguan-Murphy, B. (2015) Electrospun biopolyesters as drug screening platforms for corneal keratocytes. International Journal of Polymeric Materials and Polymeric Biomaterials, 64 (15). pp. 785-791. ISSN 0091-4037

Azimah, E.; Zainal, N.; Hassan, Z.; Shuhaimi, A.; Bahrin, A. (2013) Electrical and optical characterization of Mg doping in GaN. Advanced Materials Research, 620. pp. 453-457.

Aziz, A.; Mohamad, J. (2013) Urban public transport in Penang: Some policy considerations. Proceedings of the Eastern Asia Society for Transportation Studies, 9. pp. 1-19. ISSN 1881-1132

Aziz, A.; Yau, Y.H.; Puma, G.L.; Fischer, C.; Ibrahim, S.; Pichiah, S. (2014) Highly efficient magnetically separable TiO2-graphene oxide supported SrFe12O19 for direct sunlight-driven photoactivity. Chemical Engineering Journal, 235. pp. 264-274. ISSN 13858947

Aziz, A.A.; Cheng, C.K.; Ibrahim, S.; Matheswaran, M.; Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947

Aziz, A.A.; Puma, G.L.; Ibrahim, S.; Saravanan, P. (2013) Preparation, characterisation and solar photoactivity of titania supported strontium ferrite nanocomposite photocatalyst. Journal of Experimental Nanoscience, 8 (3). pp. 295-310. ISSN 1745-8080

Aziz, A.A.; Yong, K.S.; Ibrahim, S.; Pichiah, S. (2012) Enhanced magnetic separation and photocatalytic activity of nitrogen doped titania photocatalyst supported on strontium ferrite. Journal of Hazardous Materials, 199-20. pp. 143-150. ISSN 0304-3894

Aziz, A.R.; Ibrahim, S.; Parthasarathy, R. (1999) Determination of just-suspension speed for Rushton Turbine using tank bottom pressure measurements. Institution of Chemical Engineers Symposium Series (146). pp. 325-335. ISSN 03070492 (ISSN)

Aziz, F.; Arof, H.; Mokhtar, N.; Mubin, M.; Abu Talip, M.S. (2015) Rotation invariant bin detection and solid waste level classification. Measurement, 65. pp. 19-28. ISSN 0263-2241

Aziz, S.B.; Abidin, Z.H.Z. (2015) Ion-transport study in nanocomposite solid polymer electrolytes based on chitosan: electrical and dielectric analysis. Journal of Applied Polymer Science, 132 (15).

Azooz, S.M.; Ahmad, F.; Ahmad, H.; Harun, S.W.; Hamida, B.A.; Khan, S.; Halder, A.; Paul, M.C.; Pal, M.; Bhadra, S.K. (2015) Mode-locked 2 mu m fiber laser with a multi-walled carbon nanotube as a saturable absorber. Chinese Optics Letters, 13 (3). p. 4. ISSN 1671-7694

Azooz, S.M.; Harun, S.W.; Ahmad, H.; Halder, A.; Paul, M.C.; Das, S.; Bhadra, S.K. (2015) A Q-switched fibre laser operating in the 2 mu m region based on nonlinear polarization rotation technique. Ukrainian Journal of Physical Optics, 16 (1). pp. 32-37. ISSN 1609-1833

Azooz, S.M.; Harun, S.W.; Ahmad, H.; Halder, A.; Paul, M.C.; Pal, M.; Bhadra, S.K. (2015) Mode-locked thulium ytterbium co-doped fiber laser with graphene oxide paper saturable absorber. Chinese Physics Letters, 32 (1). ISSN 0256-307X

Azri, M.; Abd Rahim, N.; Abd Halim, W. (2015) A highly efficient single-phase transformerless h-bridge inverter for reducing leakage ground current in photovoltaic grid-connected system. Electric Power Components and Systems, 43 (8-10). pp. 928-938. ISSN 1532-5008

Azuddin, M.; Choudhury, I.A.; Taha, Z. (2015) Development and performance evaluation of a low-cost custom-made vertical injection molding machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1). pp. 79-86. ISSN 1678-5878

Bagh, F.S.G.; Shahbaz, K.; Mjalli, F.S.; Hashim, M.A.; AlNashef, I.M. (2015) Zinc (II) chloride-based deep eutectic solvents for application as electrolytes: Preparation and characterization. Journal of Molecular Liquids, 204. pp. 76-83. ISSN 0167-7322

Baharuddin, N.H.; Sulaiman, N.M.N.; Aroua, M.K. (2015) Removal of heavy metal Ions from mixed solutions via polymer-enhanced ultrafiltration using starch as a water-soluble biopolymer. Environmental Progress & Sustainable Energy, 34 (2). pp. 359-367. ISSN 1944-7442

Baharuddin, N.H.; Sulaiman, N.M.N.; Aroua, M.K. (2015) Removal of zinc and lead ions by polymer-enhanced ultrafiltration using unmodified starch as novel binding polymer. International Journal of Environmental Science and Technology, 12 (6). pp. 1825-1834. ISSN 1735-1472

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2013) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, 37 (1-2). pp. 258-264. ISSN 0307904X

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2009) Evaluation of a bio-mechanism by graphed static equilibrium forces. World Academy of Science, Engineering and Technology, 36. pp. 807-810. ISSN 2010376X

Banu, L.J.; Balasubramaniam, P.; Ratnavelu, K. (2015) Robust stability analysis for discrete-time uncertain neural networks with leakage time-varying delay. Neurocomputing, 151 (2). pp. 808-816.

Baradaran, S.; Moghaddam, E.; Nasiri-Tabrizi, B.; Basirun, W.J.; Mehrali, M.; Sookhakian, M.; Hamdi, M.; Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science & Engineering C-Materials for Biological Applications, 49. pp. 656-668. ISSN 0928-4931

Baranitharan, E.; Khan, M.R.; Yousuf, A.; Teo, W.F.A.; Tan, G.Y.A.; Cheng, C.K. (2015) Enhanced power generation using controlled inoculum from palm oil mill effluent fed microbial fuel cell. Fuel, 143. pp. 72-79.

Barzani, M.M.; Sarhan, A.A.D.; Farahany, S.; Ramesh, S.; Maher, I. (2015) Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement, 62. pp. 170-178. ISSN 0263-2241

Barzani, M.M.; Zalnezhad, E.; Sarhan, A.A.D.; Farahany, S.; Ramesh, S. (2015) Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning. Measurement, 61. pp. 150-161. ISSN 0263-2241

Batumalay, M.; Harun, S.W.; Irawati, N.; Ahmad, H.; Arof, H. (2015) A study of relative humidity fiber-optic sensors. IEEE Sensors Journal, 15 (3). pp. 1945-1950.

Bayat, A.E.; Junin, R.; Kharrat, R.; Shamshirband, S.; Akib, S.; Buang, Z. (2015) Optimization of solvent composition and injection rate in vapour extraction process. Journal of Petroleum Science and Engineering, 128. pp. 33-43. ISSN 0920-4105

Besharati, S.R.; Dabbagh, V.; Amini, H.; Sarhan, A.A.D.; Akbari, J. (2015) Nonlinear dynamic analysis of a new antibacklash gear mechanism design for reducing dynamic transmission error. Journal of Mechanical Design, 137 (5). p. 3. ISSN 1050-0472

Bhuiyan, M.H.U.; Saidur, R.; Mostafizur, R.M.; Mahbubul, I.M.; Amalina, M.A. (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. International Communications in Heat and Mass Transfer, 65. pp. 82-88. ISSN 0735-1933

Bhuiyan, M.S.H.; Choudhury, I.A. (2015) Investigation of tool wear and surface finish by analyzing vibration signals in turning assab-705 steel. Machining Science and Technology, 19 (2). pp. 236-261. ISSN 1091-0344

Bhuiyan, M.S.H.; Choudhury, I.A.; Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200

Bouafass, A.; Rahmani, L.; Mekhilef, S. (2015) Design and real time implementation of single phase boost power factor correction converter. Isa Transactions, 55. pp. 267-274. ISSN 0019-0578

Bradley, D.A.; Mandiraji, G.A.; Ghomeishi, M.; Dermosesian, E.; Adikan, F.R.M.; Rashid, H.A.A.; Maah, M.J. (2015) Enhancing the radiation dose detection sensitivity of optical fibres. Applied Radiation and Isotopes, 100. pp. 43-49. ISSN 0969-8043

Bulgiba, A.M.; Hairuliza, R.; Rasiah, R.I. (2001) Improving internet access in the University of Malaya Medical Centre: A NADI IT innovation. Journal of the University of Malaya Medical Centre (JUMMEC), 5 (2). pp. 93-97. ISSN 1823-7339

Buthiyappan, A.; Aziz, A.R.A.; Daud, W. (2015) Degradation performance and cost implication of UV-integrated advanced oxidation processes for wastewater treatments. Reviews in Chemical Engineering, 31 (3). pp. 263-302. ISSN 0167-8299

Ch'ng, S.Y.; Andriyana, A.; Tee, Y.L.; Verron, E. (2015) Effects of carbon black and the presence of static mechanical strain on the swelling of elastomers in solvent. Materials, 8 (3). pp. 884-898. ISSN 1996-1944

Chan, B.T.; Lim, E.; Ong, C.W.; Abu Osman, N.A. (2015) Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18 (1). pp. 90-96. ISSN 1025-5842

Chan, C.H.; Lim, J.J.; Yusoff, R.; Ngoh, G.C. (2015) A generalized energy-based kinetic model for microwave-assisted extraction of bioactive compounds from plants. Separation and Purification Technology, 143. pp. 152-160. ISSN 1383-5866

Chan, C.H.; Yusoff, R.; Ngoh, G.C. (2015) Assessment of scale-up parameters of microwave-assisted extraction via the extraction of flavonoids from cocoa leaves. Chemical Engineering & Technology, 38 (3). pp. 489-496. ISSN 0930-7516

Chan, C.S.; Coghill, G.M.; Liu, H. (2011) Recent advances in fuzzy qualitative reasoning. International Journal of Uncertainty Fuzziness and Knowledge-based Systems, 19 (3). pp. 417-422.

Chan, C.S.; Liu, H.; Brown, D. (2007) Adapting robot kinematics for human-arm motion recognition. International Journal of Knowledge-based and Intelligent Engineering Systems, 11 (4). pp. 207-217. ISSN 1327-2314

Chan, C.S.; Liu, H.H. (2009) Fuzzy qualitative human motion analysis. Ieee Transactions on Fuzzy Systems, 17 (4). pp. 851-862. ISSN 1063-6706

Chang, Kah-Hyong; Paramesran, R. (2015) A configurable architecture for fast moments computation. Journal of Signal Processing Systems for Signal Image and Video Technology, 78 (2). pp. 179-186. ISSN 1939-8018

Chang, R.K.Y.; Loo, C.K.; Rao, M.V.C. (2009) Enhanced probabilistic neural network with data imputation capabilities for machine-fault slassification. Neural Computing & Applications, 18 (7). pp. 791-800. ISSN 0941-0643

Chang, R.K.Y.; Loo, C.K.; Rao, M.V.C. (2008) A global k-means approach for autonomous cluster initialization of probabilistic neural network. Informatica, 32. pp. 219-225. ISSN 0350-5596

Chang, Siow-Wee; Sameem, A.K.; Zain, R.B.; Merican, A.F.M.A. (2010) A bootstrap-ANFIS framework for oral cancer prognosis based on clinical and genomic markers. Computer Science and Information Technology (ICCSIT), 2010 3rd IEEE International Conference on, 6. pp. 487-491. ISSN 978-1-4244-5537-9

Chekanov, S.; Derrick, M.; Magill, S.; Musgrave, B.; Nicholass, D.; Repond, J.; Yoshida, R.; Mattingly, M.C.K.; Antonioli, P.; Bari, G.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Cindolo, F.; Corradi, M.; Iacobucci, G.; Margotti, A.; Nania, R.; Polini, A.; Antonelli, S.; Basile, M.; Bindi, M.; Cifarelli, L.; Contin, A.; De Pasquale, S.; Sartorelli, G.; Zichichi, A.; Bartsch, D.; Brock, I.; Hartmann, H.; Hilger, E.; Jakob, H.P.; Juengst, M.; Nuncio-Quiroz, A.E.; Paul, E.; Samson, U.; Schoenberg, V.; Shehzadi, R.; Wlasenko, M.; Morris, J.D.; Kaur, M.; Kaur, P.; Singh, I.; Capua, M.; Fazio, S.; Mastroberardino, A.; Schioppa, M.; Susinno, G.; Tassi, E.; Kim, J.Y.; Ibrahim, Z.A.; Idris, F.M.; Kamaluddin, B.; Abdullah, W.A.T.W.; Ning, Y.; Ren, Z.; Sciulli, F.; Chwastowski, J.; Eskreys, A.; Figiel, J.; Galas, A.; Olkiewicz, K.; Pawlik, B.; Stopa, P.; Zawiejski, L.; Adamczyk, L.; Bold, T.; Grabowska-Bold, I.; Kisielewska, D.; Lukasik, J.; Przybycien, M.; Suszycki, L.; Kotanski, A.; Slominski, W.; Bachynska, O.; Behnke, O.; Behr, J.; Behrens, U.; Blohm, C.; Borras, K.; Bot, D.; Ciesielski, R.; Coppola, N.; Fang, S.; Geiser, A.; Goettlicher, P.; Grebenyuk, J.; Gregor, I.; Haas, T.; Hain, W.; Huettmann, A.; Januschek, F.; Kahle, B.; Katkov, I.I.; Klein, U.; Koetz, U.; Kowalski, H.; Libov, V.; Lisovyi, M.; Lobodzinska, E.; Loehr, B.; Mankel, R.; Melzer-Pellmann, I.A.; Miglioranzi, S.; Montanari, A.; Namsoo, T.; Notz, D.; Parenti, A.; Raval, A.; Roloff, P.; Rubinsky, I.; Schneekloth, U.; Spiridonov, A.; Szuba, D.; Szuba, J.; Theedt, T.; Tomaszewska, J.; Verbytskyi, A.; Wolf, G.; Wrona, K.; Yaguees-Molina, A.G.; Youngman, C.; Zeuner, W.; Drugakov, V.; Lohmann, W.; Schlenstedt, S.; Barbagli, G.; Gallo, E.; Pelfer, P.G.; Bamberger, A.; Dobur, D.; Karstens, F.; Vlasov, N.N.; Bussey, P.J.; Doyle, A.T.; Forrest, M.; Saxon, D.H.; Skillicorn, I.O.; Gialas, I.; Papageorgiu, K.; Holm, U.; Klanner, R.; Lohrmann, E.; Perrey, H.; Schleper, P.; Schoerner-Sadenius, T.; Sztuk, J.; Stadie, H.; Turcato, M.; Long, K.R.; Tapper, A.D.; Matsumoto, T.; Nagano, K.; Tokushuku, K.; Yamada, S.; Yamazaki, Y.; Barakbaev, A.N.; Boos, E.G.; Pokrovskiy, N.S.; Zhautykov, B.O.; Aushev, V.; Borodin, M.; Kadenko, I.; Korol, Ie.; Kuprash, O.; Lontkovskyi, D.; Makarenko, I.; Onishchuk, Y.; Salii, A.; Sorokin, I.; Viazlo, V.; Volynets, O.; Zenaiev, O.; Zolko, M.; Son, D.; de Favereau, J.; Piotrzkowski, K.; Barreiro, F.; Glasman, C.; Jimenez, M.; del Peso, J.; Ron, E.; Terron, J.; Uribe-Estrada, C.; Corriveau, F.; Schwartz, J.; Zhou, C.; Tsurugai, T.; Antonov, A.; Dolgoshein, B.A.; Gladkov, D.; Sosnovtsev, V.; Stifutkin, A.; Suchkov, S.; Dementiev, R.K.; Ermolov, P.F.; Gladilin, L.K.; Golubkov, Y.A.; Khein, L.A.; Korzhavina, I.A.; Kuzmin, V.A.; Levchenko, B.B.; Lukina, O.Y.; Proskuryakov, A.S.; Shcheglova, L.M.; Zotkin, D.S.; Abt, I.; Caldwell, A.; Kollar, D.; Reisert, B.; Schmidke, W.B.; Grigorescu, G.; Keramidas, A.; Koffeman, E.; Kooijman, P.; Pellegrino, A.; Tiecke, H.; Vazquez, M.; Wiggers, L.; Bruemmer, N.; Bylsma, B.; Durkin, L.S.; Lee, A.; Ling, T.Y.; Cooper-Sarkar, A.M.; Devenish, R.C.E.; Ferrando, J.; Foster, B.; Gwenlan, C.; Horton, K.; Oliver, K.; Robertson, A.; Walczak, R.; Bertolin, A.; Dal Corso, F.; Dusini, S.; Longhin, A.; Stanco, L.; Brugnera, R.; Carlin, R.; Garfagnini, A.; Limentani, S.; Oh, B.Y.; Whitmore, J.J.; Iga, Y.; D'Agostini, G.; Marini, G.; Nigro, A.; Hart, J.C.; Abramowicz, H.; Ingbir, R.; Kananov, S.; Levy, A.; Stern, A.; Ishitsuka, M.; Kanno, T.; Kuze, M.; Maeda, J.; Hori, R.; Okazaki, N.; Shimizu, S.; Hamatsu, R.; Kitamura, S.; Ota, O.; Ri, Y.D.; Costa, M.; Ferrero, M.I.; Monaco, V.; Sacchi, R.; Sola, V.; Solano, A.; Arneodo, M.; Ruspa, M.; Fourletov, S.; Martin, J.F.; Stewart, T.P.; Boutle, S.K.; Butterworth, J.M.; Jones, T.W.; Loizides, J.H.; Wing, M.; Brzozowska, B.; Ciborowski, J.; Grzelak, G.; Kulinski, P.; Luzniak, P.; Malka, J.; Nowak, R.J.; Pawlak, J.M.; Perlanski, W.; Zarnecki, A.F.; Adamus, M.; Plucinski, P.; Tymieniecka, T.; Eisenberg, Y.; Hochman, D.; Karshon, U.; Brownson, E.; Reeder, D.D.; Savin, A.A.; Smith, W.H.; Wolfe, H.; Bhadra, S.; Catterall, C.D.; Hartner, G.; Noor, U.; Whyte, J.; Collaboration, ZEUS (2010) A QCD analysis of ZEUS diffractive data. Nuclear Physics B, 831 (1-2). pp. 1-25. ISSN 0550-3213

Chen, L.; Lam, Wei-Haur (2015) A review of survivability and remedial actions of tidal current turbines. Renewable & Sustainable Energy Reviews, 43. pp. 891-900. ISSN 1364-0321

Cheong, L.S.; Abdullah, H.S.L.; Yusop, F.D.; Muhamad, A.S.; Tsuey, C.S.; Wei, C.S. (2012) Challenges among individuals with visual impairment in an institution of higher learning in Malaysia. Journal of Special Needs Education, 2. pp. 99-107.

Chew, C.M.; Aroua, M.K.; Hussain, M.A.; Wan Ismail, W.M.Z. (2015) Practical performance analysis of an industrial-scale ultrafiltration membrane water treatment plant. Journal of the Taiwan Institute of Chemical Engineers, 46. pp. 132-139. ISSN 1876-1070

Chew, C.S.; Durairaj, R.; Haseeb, A.S.M.A; Beake, B. (2015) Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94. ISSN 0954-0911

Chia, P.Y.; Haseeb, A.S.M.A. (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. Journal of Materials Science-Materials in Electronics, 26 (1). pp. 294-299. ISSN 0957-4522

Chiang, A.; Baba, M.S. (2006) Developing an intelligent system to acquire meeting knowledge in problem-based learning environments. International Journal of Innovative Computing Information and Control, 2 (2). pp. 465-479. ISSN 1349-4198

Chiew, T.K.; Salim, S.S. (2003) Webuse: website usability evaluation tool. Malaysian Journal of Computer Science, 16 (1). pp. 47-57. ISSN 0127-9084

Cho, J.; Choi, J.; Nam, T.; Park, J.; Park-Ko, I.; Ibrahim, F. (2007) Development of tilt table with visual feedback function for hemiplegia patients. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2007. pp. 4782-4785. ISSN 1557-170X

Choi, J.R.; Pingguan-Murphy, B.; Abas, W.A.B.W.; Yong, K.W.; Poon, C.T.; Azmi, M.A.N.; Omar, S.Z.; Chua, K.H.; Xu, F.; Safwani, W.K.Z.W. (2015) In situ normoxia enhances survival and proliferation rate of human adipose tissue-derived stromal cells without increasing the risk of tumourigenesis. Plos One, 10 (1). e0115034. ISSN 25615717

Chong, W.T.; Muzammil, W.K.; Fazlizan, A.; Hassan, M.R.; Taheri, H.; Gwani, M.; Kothari, H.; Poh, S.C. (2015) Urban eco-greenergy (TM) hybrid wind-solar photovoltaic energy system and its applications. International Journal of Precision Engineering and Manufacturing, 16 (7). pp. 1263-1268. ISSN 2234-7593

Choudhury, D.; Roy, T.; Krupka, I.; Hartl, M.; Mootanah, R. (2015) Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 229 (4). pp. 410-419. ISSN 1350-6501

Chu Kiong, L.; Rajeswari, M.; Rao, M.V.C. (2003) Extrapolation detection and novelty-based node insertion for sequential growing multi-experts network. Applied Soft Computing, 3 (2). pp. 159-175. ISSN 1568-4946

Chu Kiong, L.; Rajeswari, M.; Rao, M.V.C. (2003) Nonlinear dynamic system identification and control via constructivism inspired neural network. Applied Soft Computing, 3 (3). pp. 237-257. ISSN 1568-4946

Daniel, E.G.S.; Abualrob, M.M.A. (2011) The Delphi technique in identifying learning objectives for the development of science, technology and society modules for Palestinian ninth grade science curriculum. International Journal of Science Education. pp. 1-21. ISSN 0950-0693

Darain, K.M.U.; Jumaat, M.Z.; Hossain, M.A.; Hosen, M.A.; Obaydullah, M.; Huda, M.N.; Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Darain, K.M.U.; Jumaat, M.Z.; Hossain, M.A.; Hosen, M.A.; Obaydullah, M.; Huda, M.N.; Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Datta, R.S.; Said, S.M.; Shahrir, S.R.; Abdullah, N.; Sabri, M.F.M.; Balamurugan, S.; Miyazaki, Y.; Hayashi, K.; Hashim, N.A.; Habiba, U.; Afifi, A.M. (2015) Ionic liquid entrapment by an electrospun polymer nanofiber matrix as a high conductivity polymer electrolyte. Rsc Advances, 5 (60). pp. 48217-48223. ISSN 2046-2069

Davoodi, M.M.; Sapuan, S.M.; Aidy, A.; Abu Osman, N.A.; Oshkour, A.A.; Wan Abas, W.A.B. (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Dawal, S.; Tahriri, F.; Jen, Y.; Case, K.; Tho, N.; Zuhdi, A.; Mousavi, M.; Amindoust, A.; Sakundarini, N. (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in malaysian automotive SMEs. International Journal of Precision Engineering and Manufacturing, 16 (6). pp. 1195-1203. ISSN 2234-7593

Dawal, S.Z.M.; Ismail, Z.; Yusuf, K.; Abdul-Rashid, S.H.; Shalahim, N.S.M.; Abdullah, N.S.; Kamil, N.S.M. (2015) Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement, 59. pp. 205-215. ISSN 0263-2241

Dian, L.Y.; Johan, M.R. (2015) Electrical conductivity and transport properties of gold decorated amorphous carbon nanotubes/Epoxy Composites. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 120-124. ISSN 1536-383X

Dian, L.Y.; Johan, M.R. (2015) Functionalization of amorphous carbon nanotubes for au nanoparticles hybridization. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 181-186. ISSN 1536-383X

Din, M.M.A.; Rasouli, A.A. (2010) Application of the object-oriented technique to monitor coastline changes- case study: Caspian sea. Disaster Advances, 3 (2). pp. 56-63.

Doufesh, H.; Faisal, T.; Lim, K.S.; Ibrahim, F. (2011) EEG Spectral Analysis on Muslim Prayers. Applied Psychophysiology and Biofeedback.

Doufesh, H.; Faisal, T.; Lim, K.S.; Ibrahim, F. (2012) EEG spectral analysis on muslim prayers. Applied Psychophysiology Biofeedback, 37 (1). pp. 11-18. ISSN 1090-0586

Doufesh, H.; Ibrahim, F.; Ismail, N.A.; Wan Ahmad, W.A. (2013) Assessment of heart rates and blood pressure in different Salat positions. Journal of Physical Therapy Science, 25 (2). pp. 211-214. ISSN 0915-5287

Ebrahimi, M.; Rahman, H.A.; Mohd-Rahim, F.A.; Chen, W. (2014) Lifecycle framework for sustainable residential buildings in Malaysia. Open House International, 39 (4). pp. 14-27.

Edzan, N.N. (2000) Malaysian legal sources: Print. Malaysian Journal of Library & Information Science, 5 (1). pp. 19-36.

Edzan, N.N. (2007) Tracing information literacy of computer science undergraduates: A content analysis of students' academic exercise. Malaysian Journal of library & Information Science, 12 (1). pp. 97-109.

Edzan, N.N. (1996) The use of CD-ROM databases by Malaysian postgraduate students in Leeds. Malaysian Journal of Library & Information Science, 1 (1). pp. 37-55.

Edzan, N.N.; Mohd Sharif, M.S. (2005) Nila: A national information literacy agenda for Malaysia. Malaysian Journal of Library & Information Science, 10 (1). pp. 91-103.

Elsayed, B.A.; Hassan, M.A.; Mekhilef, S. (2015) Fuzzy swinging-up with sliding mode control for third order cart-inverted pendulum system. International Journal of Control Automation and Systems, 13 (1). pp. 238-248. ISSN 1598-6446

Emami, S.D.; Soltanian, M.R.K.; Attaran, A.; Abdul-Rashid, H.A.; Penny, R.; Moghavvemi, M.; Harun, S.W.; Ahmad, H.; Mohammed, W.S. (2015) Application of fano resonance effects in optical antennas formed by regular clusters of nanospheres. Applied Physics a-Materials Science & Processing, 118 (1). pp. 139-150. ISSN 0947-8396

Esfe, M.H.; Saedodin, S.; Naderi, A.; Alirezaie, A.; Karimipour, A.; Wongwises, S.; Goodarzi, M.; bin Dahari, M. (2015) Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods. International Communications in Heat and Mass Transfer, 63. pp. 35-40. ISSN 0735-1933

Eshraghi, A.; Abu Osman, N.A.; Gholizadeh, H.; Ali, S.; Abas, W.A.B.W. (2015) Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs. American Journal of Physical Medicine & Rehabilitation, 94 (1). pp. 1-10. ISSN 0894-9115

Eshraghi, A.; Abu Osman, N.A.; Gholizadeh, H.; Ali, S.; Sævarsson, S.K.; Wan Abas, W.A.B. (2013) An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees. Clinical Biomechanics, 28 (1). pp. 55-60. ISSN 0268-0033

Eshraghi, A.; Abu Osman, N.A.; Karimi, M.T.; Gholizadeh, H.; Ali, S.; Wan Abas, W.A.B. (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine and Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115

Eshraghi, A.; Osman, N.A.; Gholizadeh, H.; Ahmadian, J.; Rahmati, B.; Abas, W.A. (2013) Development and evaluation of new coupling system for lower limb prostheses with acoustic alarm system. Scientific Reports, 3. p. 2270. ISSN 2045-2322

Estrada, M.A.R.; Yap, S.F. (2010) The openness growth monitoring model (OGM-Model): A note for JPM readers. Journal of Policy Modeling, 32 (4). pp. 589-592.

Fahami, A.; Beall, G.W.; Nasiri-Tabrizi, B.; Pingguan-Murphy, B. (2015) Effect of high-energy ball milling on the formation and microstructural features of carbonated chlorapatite nanopowders. Ceramics International, 41 (3). pp. 4750-4758. ISSN 0272-8842

Fahami, A.; Nasiri-Tabrizi, B.; Beall, G.W.; Pingguan-Murphy, B. (2015) Effect of ion concentration on mechanosynthesis of carbonated chlorapatite nanopowders. Materials Letters, 146. pp. 16-19. ISSN 0167-577X

Faisal, T.; Ibrahim, F.; Taib, M.N. (2008) Analysis of significant factors for dengue infection prognosis using the self organizing map. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2008. pp. 5140-5143. ISSN 1557170X

Faisal, T.; Ibrahim, F.; Taib, M.N. (2010) A noninvasive intelligent approach for predicting the risk in dengue patients. Expert Systems with Applications, 37 (3). pp. 2175-2181. ISSN 0957-4174

Faisal, T.; Taib, M.N.; Ibrahim, F. (2012) Adaptive Neuro-Fuzzy Inference System for diagnosis risk in dengue patients. Expert Systems with Applications, 39 (4). pp. 4483-4495. ISSN 0957-4174

Faisal, T.; Taib, M.N.; Ibrahim, F. (2012) Neural network diagnostic system for dengue patients risk classification. Journal of Medical Systems, 36 (2). pp. 661-676. ISSN 0148-5598

Faisal, T.; Taib, M.N.; Ibrahim, F. (2010) Reexamination of risk criteria in dengue patients using the self-organizing map. Medical and Biological Engineering and Computing, 48 (3). pp. 293-301. ISSN 0140-0118

Faizal, M.; Saidur, R.; Mekhilef, S.; Hepbasli, A.; Mahbubul, I.M. (2015) Energy, economic, and environmental analysis of a flat-plate solar collector operated with SiO2 nanofluid. Clean Technologies and Environmental Policy, 17 (6). pp. 1457-1473. ISSN 1618-954X

Farhadi, H.; Salehi, H.; Yunus, M.M.; Aghaei Chadegani, A.; Farhadi, M.; Fooladi, M.; Ale Ebrahim, N. (2013) Does it matter which citation tool is used to compare the h-index of a group of highly cited researchers? Australian Journal of Basic and Applied Sciences, 7 (4). pp. 198-202. ISSN 1991-8178

Farhadi, M.; Salehi, H.; Embi, M.A.; Fooladi, M.; Farhadi, H.; Aehaei Chadegani, A.; Ale Ebrahim, N. (2013) Contribution of information and communication technology (ICT) in country'S H-index. Journal of Theoretical and Applied Information Technology, 57 (1). pp. 122-127. ISSN 1992-8645

Fariborzi, H.; Moghavvemi, M. (2009) EAMTR: Energy aware multi-tree routing for wireless sensor networks. IET Communications, 3 (5). pp. 733-739. ISSN 17518628

Farzadi, A.; Waran, V.; Solati-Hashjin, M.; Rahman, Z.A.A.; Asadi, M.; Abu Osman, N.A. (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41 (7). pp. 8320-8330. ISSN 0272-8842

Fatoyinbo, H.O.; Kadri, N.A.; Gould, D.H.; Hoettges, K.F.; Labeed, F.H. (2011) Real-time cell electrophysiology using a multi-channel dielectrophoretic-dot microelectrode array. Electrophoresis, 32 (18). pp. 2541-2549. ISSN 01730835 (ISSN)

Fauzi, H.; Metselaar, H.S.C.; Mahlia, T.M.I.; Silakhori, M.; Ong, H.C. (2015) Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications. Applied Thermal Engineering, 80. pp. 127-131. ISSN 1359-4311

Foong, K.Y.; Alengaram, U.J.; Jumaat, M.Z.; Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University-Science A, 16 (1). pp. 59-69. ISSN 1673-565X

Forooghi, P.; Abdi, I.A.; Dahari, M.; Hooman, K. (2015) Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli. International Journal of Heat and Mass Transfer, 81. pp. 222-233. ISSN 0017-9310

Freddy, T.K.S.; Rahim, N.A.; Hew, W.P.; Che, H.S. (2015) Modulation techniques to reduce leakage current in three-phase transformerless H7 photovoltaic inverter. IEEE Transactions on Industrial Electronics, 62 (1). pp. 322-331. ISSN 0278-0046

Gan, G.K.W.; Yeo, K.S.; Adikan, F.R.M.; Shee, Y.G. (2015) Four-wave-mixing-assisted brillouin fiber laser with double-brillouin-frequency spacing. Optical Fiber Technology, 21. pp. 198-201. ISSN 1068-5200

Gani, A.; Abouzakhar, N.; Manson, G. (2003) UMAS learning requirement for controlling network resources. Developments in Applied Artificial Intelligence, 2718. pp. 487-494. ISSN 0302-9743

Gani, A.; Han, Q.; Anuar, N.B.; Zakaria, O. (2009) Enhancing DSR protocol performance in mobile ad hoc network using ACK reply. WSEAS Transactions on Communications, 8 (2). pp. 227-236. ISSN 1109-2742

Gani, A.; Hassan, M.K.; Zaidan, A.A.; Zaidan, B.B. (2011) Intelligent routing information protocol using full triggered update mechanism. International Journal of the Physical Sciences, 6 (11). pp. 2750-2761. ISSN 1992-1950

Gani, A.; Li, X.; Yang, L.; Zakaria, O. (2008) Radio frequency combination for TCP/IP suite protocol improvement in 4G mobile internet networks. International Journal of Communications, 2 (1). pp. 27-36.

Gani, A.; Li, X.; Yang, L.; Zakaria, O.; Anuar, N.B. (2009) Multi-bandwidth data path design for 5G wireless mobile internets. WSEAS Transactions on Information Science and Applications, 6 (2). pp. 159-168. ISSN 1790-0832

Gani, A.; Mouratidis, H.; Abouzakhar, N.S.; Manson, G.A. (2002) Developing an intelligent user manager system for controlling smart school network resources. Malaysian Journal of Computer Science, 15 (2). pp. 56-69. ISSN 0127-9084

Gani, A.; Yang, L.; Anuar, N.B.; Zakaria, O.; Taher, R.S. (2009) Implementing lightweight reservation protocol for mobile network using hybrid schema. WSEAS Transactions on Computers, 8 (3). pp. 417-428. ISSN 1109-2750

Gani, A.; Zakaria, O.; Jumaat, N.B. (2004) A Markov Decision Process model for traffic prioritisation provisioning. Issues in Informing Science and Information Technology, 1. pp. 905-913.

Garoosi, F.; Safaei, M.R.; Dahari, M.; Hooman, K. (2015) Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity. Applied Mathematics and Computation, 250. pp. 28-46. ISSN 0096-3003

Ghafarirad, H.; Rezaei, S.M.; Sarhan, A.A.D.; Zareinejad, M. (2015) Continuous dynamic modelling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behaviour analysis. Mathematical and Computer Modelling of Dynamical Systems, 21 (2). pp. 130-152. ISSN 1387-3954

Ghafarirad, H.; Rezaei, S.M.; Sarhan, A.A.D.M.; Mardi, N.A. (2015) Modified robust external force control with disturbance rejection with application to piezoelectric actuators. Transactions of the Institute of Measurement and Control, 37 (1). pp. 131-143. ISSN 0142-3312

Gharehkhani, S.; Sadeghinezhad, E.; Kazi, S.N.; Yarmand, H.; Badarudin, A.; Safaei, M.R.; Zubir, M.N. (2015) Basic effects of pulp refining on fiber properties- a review. Carbohydrate Polymers, 115. pp. 785-803. ISSN 0144-8617

Ghauth, K.I.; Abdullah, N.A. (2010) Learning materials recommendation using good learners ratings and content-based filtering. Educational Technology Research and Development, 58 (6). pp. 711-727. ISSN 1042-1629

Ghauth, K.I.; Abdullah, N.A. (2010) Measuring learner's performance in e-learning recommender systems. Australasian Journal of Educational Technology, 26 (6). pp. 764-774. ISSN 1449-5554

Ghauth, K.I.; Abdullah, N.A. (2011) The effect of incorporating good learners' ratings in e-learning content-based recommender system. Educational Technology & Society, 14 (2). pp. 248-257. ISSN 1436-4522

Ghauth, K.I.; Abdullah, N.A. (2010) An empirical evaluation of learner performance in e-learning recommender systems and an adaptive hypermedia system. Malaysian Journal of Computer Science, 23 (3). pp. 141-152. ISSN 0127-9084

Ghavimi, S.A.A.; Ebrahimzadeh, M.H.; Solati-Hashjin, M.; Abu Osman, N.A. (2015) Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2482-2498. ISSN 1549-3296

Ghazali, M.; Kadri, N.A. (2011) Preliminary investigation of tensile properties of welded type I collagen to be used as surgical sealant. International Journal of Physical Sciences, 6 (36). pp. 8057-8062. ISSN 19921950 (ISSN)

Ghiyamat, A.; Shafri, H.Z.M.; Mahdiraji, G.A.; Ashurov, R.; Shariff, A.R.M.; Mansor, S. (2015) Airborne hyperspectral discrimination of tree species with different ages using discrete wavelet transform. International Journal of Remote Sensing, 36 (1). pp. 318-342. ISSN 0143-1161

Gholizadeh, H.; Abu Osman, N.A.; Eshraghi, A.; Ali, S.; Arifin, N.; Wan Abas, W.A.B. (2014) Evaluation of new suspension system for limb prosthetics. BioMedical Engineering Online, 13 (1). pp. 1-13. ISSN 1475-925X

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Abas, W.A.B.W.; Azam, M.N. (2012) Transtibial prosthetic socket pistoning: static evaluation of Seal-In((R)) X5 and Dermo((R)) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Lúvíksdóttir, A.G.; Wan Abas, W.A.B. (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine and Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H.; Osman, N.A.A.; Eshraghi, A.; Ali, S.; Sævarsson, S.K.; Wan Abas, W.A.B.; Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711

Gholizadeh, H.; Osman, N.A.A.; Luviksdottir, A.G.; Eshraghi, A.; Kamyab, M.; Wan Abas, W.A.B. (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Gu, Y.; Zainab, A.N. (2000) Channels of published research communication used by Malaysian authors in computer science and information technology. Malaysian Journal of Library and Information Science, 5 (1). pp. 105-118.

Gulzar, M.; Masjuki, H.H.; Kalam, M.A.; Varman, M.; Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904

Gupta, B.M; Lal, K.; Zainab, A.N. (2002) India's collaboration in science and technology with South East Asian countries. lrlalaysian Journal of Lihrary & Information Science, 7 (2). pp. 69-89.

Hafeez Khokhar, R.; Md Noor, R.; Zrar Ghafoor, K.; Ke, C.H.; Ngadi, M.A. (2011) Fuzzy-assisted social-based routing for urban vehicular environments. EURASIP Journal on Wireless Communications and Networking, 2011 (1). pp. 1-15. ISSN 1687-1499

Haghshenasfard, M.; Yeoh, G.H.; Dahari, M.; Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311

Halim, H.; Kaur, K. (2006) Malaysian web search engines: a critical analysis. Malaysian Journal of Library & Information Science, 11 (1). pp. 103-122. (Unpublished)

Han, J.; Annuar, M.S.M.; Ariffin, M.F.K.; Gumel, A.M.; Ibrahim, S.; Heidelberg, T.; Bakar, B.; Hossain, A.B.M.S.; Sharifuddin, Y. (2011) Lipase-catalyzed synthesis of 6-o-d-glucosyldecanoate in tert-butanol: reaction optimization and effect of mixing power input. Biotechnology & Biotechnological Equipment, 25 (4). pp. 2642-2651. ISSN 1310-2818

Hanafiah, M.; Kasirun, Z.M. (2007) Using rule-based technique in developing the tool for finding suitable software methodology. Malaysian Journal of Computer Science, 20 (2). p. 209.

Haris, H.; Anyi, C.L.; Muhammad, A.R.; Ahmad, F.; Nor, R.M.; Zulkepely, N.R.; Ali, N.M.; Harun, S.W.; Arof, H. (2015) Performance of passively Q-switched ring erbium-doped fiber laser using a multiwalled carbon nanotubes polyethylene oxide (PEO) polymer composite-based saturable absorber. Microwave and Optical Technology Letters, 57 (8). pp. 1897-1901. ISSN 0895-2477

Harun, S.W.; Lim, K.S.; Jasim, A.A.; Ahmad, H. (2010) Fabrication of tapered fiber based ring resonator. Laser Physics, 20 (7). pp. 1629-1631.

Harun, S.W.; Paul, M.C.; Moghaddam, M.R.A.; Das, S.; Sen, R.; Dhar, A.; Pal, M.; Bhadra, S.K.; Ahmad, H. (2010) Efficient diode pumped ytterbium-doped fibre laser. Electronics Letters, 46 (1). 68-U97.

Haseeb, A.S.M.A.; Nishida, T.; Masuda, M.; Hayashi, Y. (2001) Mossbauer investigation on electrodeposited Fe-C and Fe-Ni-C alloys. Scripta Materialia, 44 (3). pp. 519-523.

Hashim, S.; Omar, S.S.C.; Ibrahim, S.A.; Hassan, W.M.S.W.; Ung, N.M.; Mandiraji, G.A.; Bradley, D.A.; Alzimami, K. (2015) Thermoluminescence response of flat optical fiber subjected to 9 MeV electron irradiations. Radiation Physics and Chemistry, 106. pp. 46-49. ISSN 0969-806X

Hashimoto, S.; Ohmura, N.; Kim, S.J.; Ibrahim, S.B. (2012) Advances in mixing technology: recent advances in mixing research and development. International Journal of Chemical Engineering, 2012. pp. 1-2. ISSN 1687-8078

Hasikin, K.; Soin, N.; Ibrahim, F. (2008) Modeling of an optical diaphragm for human pulse pressure detection. WSEAS Transactions on Electronics, 5 (11). pp. 447-456. ISSN 11099445 (ISSN)

Hassan, A.; Ibrahim, F. (2011) Development of a kidney teleultrasound consultation system. Journal of Digital Imaging, 24 (2). pp. 308-313. ISSN 08971889

Hassan, S.N.; Sani, Y.M.; Aziz, A.R.A.; Sulaiman, N.M.N.; Daud, W.M.A.W. (2015) Biogasoline: An out-of-the-box solution to the food-for-fuel and land-use competitions. Energy Conversion and Management, 89. pp. 349-367. ISSN 0196-8904

Hayyan, A.; Hashim, M.A.; Hayyan, M. (2015) Application of a novel catalyst in the esterification of mixed industrial palm oil for biodiesel production. Bioenergy Research, 8 (1). pp. 459-463. ISSN 1939-1234

Hayyan, M.; Aissaoui, T.; Hashim, M.A.; AlSaadi, M.A.; Hayyan, A. (2015) Triethylene glycol based deep eutectic solvents and their physical properties. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 24-30. ISSN 1876-1070

Hayyan, M.; Hashim, M.A.; AlNashef, I.M. (2015) Kinetics of superoxide ion in dimethyl sulfoxide containing ionic liquids. Ionics, 21 (3). pp. 719-728. ISSN 0947-7047

Hazidah, N.A.; Edzan, N.N.; Mahbob, Y.; Hasmawati, I. (2012) UM in the news: Marketing and promotion on social media platforms. Jurnal Persatuan Pustakawan Malaysia, 6. pp. 1-10.

Heng, L.C.; Al-Amin, A.Q.; Saidur, R.; Ward, T.A. (2015) Renewable energy choice: Cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress & Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442

Hidayatul, A.B.Z.; Nahrizul, A.B.I.N.K. (2007) Development of wireless patient data management system. Journal of Sustainability Science and Management, 2. ISSN 1823-8556

Hidayatul, A.B.Z.; Nahrizul, A.B.I.N.K. (2007) Development of wireless patient data management system. Journal of Sustainability Science and Management, 2.

Hindia, M.N.; Reza, A.W.; Noordin, K.A. (2015) A novel scheduling algorithm based on game theory and multicriteria decision making in LTE network. International Journal of Distributed Sensor Networks. p. 8. ISSN 1550-1329

Hindia, M.N.; Reza, A.W.; Noordin, K.A.; Chayon, M.H.R. (2015) A novel LTE scheduling algorithm for green technology in smart grid. PLoS One, 10 (4). p. 18. ISSN 1932-6203

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Adikan, F.R.M. (2015) Optimizing the external optical cavity parameters for performance improvement of a fiber grating fabry-perot laser. Optical Review, 22 (2). pp. 278-288. ISSN 1340-6000

Hizaddin, H.F.; Sarwono, M.; Hashim, M.A.; AlNashef, I.M.; Hadj-Kali, M.K. (2015) Coupling the capabilities of different complexing agents into deep eutectic solvents to enhance the separation of aromatics from aliphatics. The Journal of Chemical Thermodynamics, 84. pp. 67-75. ISSN 0021-9614

Hmood, A.K.; Jalab, H.A.; Kasirun, Z.M.; Zaidan, A.A.; Zaidan, B.B. (2010) On the capacity and security of steganography approaches: an overview. Journal of Applied Sciences, 10 (16). pp. 1825-1833. ISSN 1812-5654

Hmood, A.K.; Kasirun, Z.M.; Jalab, H.A.; Alam, G.M.; Zaidan, A.A.; Zaidan, B.B. (2010) On the accuracy of hiding information metrics: counterfeit protection for education and important certificates. International Journal of the Physical Sciences, 5 (7). pp. 1054-1062. ISSN 1992-1950

Hmood, J.K.; Emami, S.D.; Noordin, K.A.; Ahmad, H.; Harun, S.W.; Shalaby, H.M.H. (2015) Optical frequency comb generation based on chirping of Mach-Zehnder modulators. Optics Communications, 344. pp. 139-146. ISSN 0030-4018

Hoo, C.S.; Kanesan, J.; Ramiah, H. (2015) Cost reduction in bottom-up hierarchical-based VLSI floorplanning designs. International Journal of Circuit Theory and Applications, 43 (3). pp. 286-306. ISSN 0098-9886

Hooman, K.; Sauret, E.; Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311

Hosen, M. A.; Jumaat, M. Z.; Islam, A.B.M.S (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434

Hossain, A.; Choudhury, I.A.; Nahar, N.; Hossain, I.; Bin Mamat, A. (2015) Experimental and theoretical investigation of powder-binder mixing mechanism for metal injection molding. Materials and Manufacturing Processes, 30 (1). pp. 41-46. ISSN 1042-6914

Hossain, M.I.; Faruque, M.R.I.; Islam, M.T.; Ullah, M.H. (2015) A new wide-band double-negative metamaterial for C- and S-band applications. Materials, 8 (1). pp. 57-71. ISSN 1996-1944

Hossain, M.S.; Saidur, R.; Sabri, M.F.M.; Said, Z.; Hassani, S. (2015) Spotlight on available optical properties and models of nanofluids: A review. Renewable & Sustainable Energy Reviews, 43. pp. 750-762. ISSN 1364-0321

Hossain, S.; Masjuki, H.H.; Varman, M.; Kalam, M.A.; Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. Rsc Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069

Hosseini, S.; Azari, P.; Farahmand, E.; Gan, S.N.; Rothan, H.A.; Yusof, R.; Koole, L.H.; Djordjevic, I.; Ibrahim, F. (2015) Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors. Biosensors & Bioelectronics, 69. pp. 257-264. ISSN 0956-5663

Hosseini, S.; Ibrahim, F.; Rothan, H.A.; Yusof, R.; van der Marel, C.; Djordjevic, I.; Koole, L.H. (2015) Aging effect and antibody immobilization on -COOH exposed surfaces designed for dengue virus detection. Biochemical Engineering Journal, 99. pp. 183-192. ISSN 1369-703X

Hosseini, S.; Mahmud, N.H.M.E.; Yahya, R.B.; Ibrahim, F.; Djordjevic, I. (2015) Polypyrrole conducting polymer and its application in removal of copper ions from aqueous solution. Materials Letters, 149. pp. 77-80. ISSN 0167-577X

Hourmand, M.; Farahany, S.; Sarhan, A.A.D.; Noordin, M.Y. (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768

Huang, S.L.; Yin, C.Y.; Yap, S.Y. (2010) Particle size and metals concentrations of dust from a paint manufacturing plant. Journal of Hazardous Materials, 174 (1-3). pp. 839-842.

Huda, Z.; Zaharinie, T.; Min, G.J. (2010) Temperature effects on material behavior of aerospace aluminum alloys for subsonic and supersonic aircraft. Journal of Aerospace Engineering, 23 (2). pp. 124-128.

Ibrahim, A.A.A.; Salim, S.S. (2004) Designing software for child users: a case study of a web page construction kit for children. Malaysian Journal of Computer Science, 17 (1). pp. 32-41. ISSN 0127-9084

Ibrahim, F.; Abas, W.A.B.W.; Taib, M.N.; Guan, C.C.; Sulaiman, S. (2007) A new approach to classify risk in dengue infection using bioelectrical impedance analysis. Dengue Bulletin, 31. pp. 58-74. ISSN 1020895X

Ibrahim, F.; Ahmad, S.A.; Woo, P.J.; Wan, W.A.B.A. (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287

Ibrahim, F.; Arifin, N.; Rahim, Z.H.A. (2013) Effect of orofacial myofunctional exercise using an oral rehabilitation tool on labial closure strength, tongue elevation strength and skin elasticity. Journal of Physical Therapy Science, 25 (1). pp. 11-14. ISSN 0915-5287

Ibrahim, F.; Faisal, T.; Mohamad Salim, M.I.; Taib, M.N. (2010) Non-invasive diagnosis of risk in dengue patients using bioelectrical impedance analysis and artificial neural network. Medical and Biological Engineering and Computing, 48 (11). pp. 1141-1148. ISSN 0140-0118

Ibrahim, F.; Ismail, N.A.; Taib, M.N.; Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 1361-6579

Ibrahim, F.; Ismail, N.A.; Taib, M.N.; Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 0967-3334

Ibrahim, F.; Taib, M.N.; Abas, W.A.B.W.; Guan, C.C.; Sulaiman, S. (2005) A novel dengue fever (DF) and dengue haemorrhagic fever (DHF) analysis using artificial neural network (ANN). Computer Methods and Programs in Biomedicine, 79 (3). pp. 273-281. ISSN 01692607

Ibrahim, F.; Taib, M.N.; Wan Abas, W.A.B.; Guan, C.C.; Sulaiman, S. (2005) A novel approach to classify risk in dengue hemorrhagic fever (DHF) using bioelectrical impedance analysis (BIA). IEEE Transactions on Instrumentation and Measurement, 54 (1). pp. 237-244. ISSN 0018-9456

Ibrahim, F.; Thio, T.H.G.; Faisal, T.; Neuman, M. (2015) The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: A review. Sensors, 15 (3). pp. 6947-6995. ISSN 1424-8220

Ibrahim, I.; Ibrahim, Z.; Ahmad, H.; Jusof, M.F.M.; Yusof, Z.M.; Nawawi, S.W.; Mubin, M. (2015) An assembly sequence planning approach with a rule-based multi-state gravitational search algorithm. International Journal of Advanced Manufacturing Technology, 79 (5-8). pp. 1363-1376. ISSN 0268-3768

Ibrahim, S.; Jasnin, S.N.; Wong, S.D.; Baker, I.F. (2012) Zwietering's equation for the suspension of porous particles and the use of curved blade impellers. International Journal of Chemical Engineering, 2012. pp. 1-13. ISSN 1687-8078

Ibrahim, S.; Nienow, A.W. (1999) Comparing impeller performance for solid-suspension in the transitional flow regime with Newtonian fluids. Chemical Engineering Research & Design, 77 (A8). pp. 721-727. ISSN 0263-8762

Ibrahim, S.; Nienow, A.W. (1996) Particle suspension in the turbulent regime: the effect of impeller type and impeller/vessel configuration. Chemical Engineering Research & Design, 74 (A6). pp. 679-688. ISSN 0263-8762

Ibrahim, S.; Nienow, A.W. (1995) Power curves and flow patterns for a range of impellers in Newtonian fluids: 40<Re<5 105. Chemical Engineering Research and Design, 73 (A5). pp. 485-491. ISSN 02638762 (ISSN)

Ibrahim, S.; Nienow, A.W. (2004) Suspension of microcarriers for cell culture with axial flow impellers. Chemical Engineering Research & Design, 82 (A9). pp. 1082-1088. ISSN 0263-8762

Ibrahim, S.; Nienow, A.W. (2010) The effect of viscosity on particle suspension in an aerated stirred vessel with different impellers and bases. Chemical Engineering Communications, 197 (4). pp. 434-454. ISSN 0098-6445

Ibrahim, S.; Vikineswary, S.; Al-Azad, S.; Chong, L.L. (2006) The effects of light intensity, inoculum size, and cell immobilisation on the treatment of sago effluent with Rhodopseudomonas palustris strain B1. Biotechnology and Bioprocess Engineering, 11 (5). pp. 377-381. ISSN 1226-8372

Idris, N.; Baba, S.; Abdullah, R. (2011) IDENTIFYING STUDENTS'SUMMARY WRITING STRATEGIES USING SUMMARY SENTENCE DECOMPOSITION ALGORITHM. Malaysian Journal of Computer Science, 24 (4). pp. 180-194.

Idris, N.; Baba, S.; Abdullah, R. (2011) Identifying Students' Summary Writing Strategies Using Summary Sentence Decomposition Algorithm. Malaysian Journal of Computer Science, 24 (4). pp. 180-194. ISSN 0127-9084

Idris, N.; Baba, S.; Abdullah, R. (2009) A Summary Sentence Decomposition Algorithm for Summarizing Strategies Identification. Computer and Information Science, 2 (1). pp. 200-210. ISSN 1913-8997

Idris, N.; Baba, S.; Abdullah, R. (2008) Using Heuristic Rules from Sentence Decomposition of Experts' Summaries to Detect Students' Summarizing Strategies. International Journal of Human and Social Sciences, 2 (1). pp. 347-351.

Idris, N.; Mohd Sapiyan, B.; Abdullah, R. (2008) An Algorithm for Summarizing Strategies Identification. Asia-Pacific Society for Computers in Education.

Ijam, A.; Saidur, R.; Ganesan, P.; Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310

Illias, H.A.; Chai, X.R.; Abu Bakar, A.H.; Mokhlis, H. (2015) Transformer incipient fault prediction using combined artificial neural network and various particle swarm optimisation techniques. PLoS One, 10 (6). p. 16. ISSN 1932-6203

Imran, M.; Lim, S.F.E.; Putra, I.S.; Ariffin, A.K.; Tan, C.J.; Purbolaksono, J. (2015) Assessment of a planar inclusion in a solid cylinder. Engineering Failure Analysis, 48. pp. 236-246. ISSN 1350-6307

Imtenan, S.; Masjuki, H.H.; Varman, M.; Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. Rsc Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069

Imtenan, S.; Masjuki, H.H.; Varman, M.; Fattah, I.M.R.; Sajjad, H.; Arbab, M.I. (2015) Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management, 94. pp. 84-94. ISSN 0196-8904

Iqbal, M.A.; Varman, M.; Hassan, M.H.; Kalam, M.A.; Hossain, S.; Sayeed, I. (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101. pp. 262-270. ISSN 0959-6526

Irawati, N.; Suthaskumar, M.; John, V.; Ali, N.M.; Ahmad, H.; Harun, S.W. (2015) Fabrication of polymer microfiber by direct drawing. Microwave and Optical Technology Letters, 57 (4). pp. 820-823. ISSN 0895-2477

Islam, M.; Mekhilef, S. (2015) H6-type transformerless single-phase inverter for grid-tied photovoltaic system. Iet Power Electronics, 8 (4). pp. 636-644. ISSN 1755-4535

Islam, M.; Mekhilef, S.; Hasan, M. (2015) Single phase transformerless inverter topologies for grid-tied photovoltaic system: A review. Renewable & Sustainable Energy Reviews, 45. pp. 69-86. ISSN 1364-0321

Islam, M.D.; Reza, C.M.F.S.; Mekhilef, S. (2015) Modeling and experimental validation of 5-level hybrid H-bridge multilevel inverter fed DTC-IM drive. Journal of Electrical Engineering & Technology, 10 (2). pp. 574-585. ISSN 1975-0102

Islam, M.J.; Reza, A.W.; Noordin, K.A.; Dimyati, K.; Kausar, A.M.Z. (2015) An accelerated and accurate three-dimensional ray tracing using red-black tree with facet mining and object bouncing techniques. Turkish Journal of Electrical Engineering and Computer Sciences, 23 (2). pp. 580-588. ISSN 1300-0632

Islam, M.T.; Ahsan, M.R.; Ullah, M.H. (2015) A new biopolymer substrate-based compact monopole antenna covering RFID, WiMAX, and C/X-band. Microwave and Optical Technology Letters, 57 (9). pp. 2002-2005. ISSN 0895-2477

Islam, M.T.; Ganesan, P.; Cheng, J. (2015) A pair of bubbles' rising dynamics in a xanthan gum solution: a CFD study. Rsc Advances, 5 (11). pp. 7819-7831. ISSN 2046-2069

Ismail, M.; Yaacob, M.; Abdulkareem, S.; Nasaruddin, F.; Abdullah, N. (2012) Support system for novice researchers (SSNR): usability evaluation of the first use. The International Arab Journal of Information Technology, 9 (4). pp. 361-367.

Ismail, M.A.; Kareem, S.A. (2011) Identifying how novice researchers search, locate, choose and use web resources at the early stage of research. Malaysian Journal of Library & Information Science, 16 (3). pp. 67-85.

Ismail, M.A.; Md-Noor, R.; Othman, M. (2004) Short message service (SMS) and its applications. Mobile Commerce Applications. pp. 179-202.

Ismail, M.S.; Moghavvemi, M.; Mahlia, T.M.I.; Muttaqi, K.M.; Moghavvemi, S. (2015) Effective utilization of excess energy in standalone hybrid renewable energy systems for improving comfort ability and reducing cost of energy: A review and analysis. Renewable & Sustainable Energy Reviews, 42. pp. 726-734. ISSN 1364-0321

Ismail, M.S.; Purbolaksono, J.; Andriyana, A.; Tan, C.J.; Muhammad, N.; Liew, H.L. (2015) The use of initial imperfection approach in design process and buckling failure evaluation of axially compressed composite cylindrical shells. Engineering Failure Analysis, 51. pp. 20-28. ISSN 1350-6307

Ismail, N.A.; Annuar, M.S.M.; Ibrahim, S. (2011) Dye decolorization by immobilized laccase: statistical optimization and effect of impeller geometry. International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Ismail, Z.; Othman, S.Z.; Law, K.H.; Sulaiman, A.H.; Hashim, R. (2015) Comparative performance of water hyacinth (Eichhornia crassipes) and water lettuce (Pista stratiotes) in preventing nutrients build-up in municipal wastewater. Clean-Soil Air Water, 43 (4). pp. 521-531. ISSN 1863-0650

Iwahashi, M.; Yoshida, T.; Mokhtar, N.B.; Kiya, H. (2015) Bit-depth scalable lossless coding for high dynamic range images. Eurasip Journal on Advances in Signal Processing. pp. 1-15. ISSN 1687-6180

Jafarlou, D.M.; Zalnezhad, E.; Hamouda, A.S.; Faraji, G.; Bin Mardi, N.A.; Mohamed, M.A.H. (2015) Evaluation of the mechanical properties of AA 6063 processed by severe plastic deformation. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A (5). pp. 2172-2184. ISSN 1073-5623

Jahangirzadeh, A.; Akib, S. (2015) Experimental study for determination of collar dimensions around bridge pier. Baltic Journal of Road and Bridge Engineering, 10 (1). pp. 89-96. ISSN 1822-427X

Jahanirad, M.; Yahya, A.L.N.; Noor, R.M. (2012) Comprehensive network security approach: security breaches at retail company-a case study. International Journal of Computer Science and Network Security, 12 (8). p. 107.

Jahanirad, M.; Yahya, A.L.N.; Noor, R.M. (2011) Security measures for VoIP application: a state of the art review. Scientific Research and Essays, 6 (23). pp. 4950-4959. ISSN 1992-2248

Jahirul, M.I.; Saidur, R.; Masjuki, H.H.; Ahmed, S.; Kalam, M.A. (2007) Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). International journal of Mechanical and Materials Engineering. pp. 35-43.

Jamaludin, J.; Abd Rahim, N.; Ping, H.W. (2015) Multilevel voltage source inverter with optimised usage of bidirectional switches. Iet Power Electronics, 8 (3). pp. 378-390. ISSN 1755-4535

Jamian, J.J.; Mustafa, M.W.; Mokhlis, H. (2015) Optimal multiple distributed generation output through rank evolutionary particle swarm optimization. Neurocomputing, 152. pp. 190-198. ISSN 0925-2312

Jamil, Z.; Annuar, M.S.M.; Ibrahim, S.; Vikineswary, S. (2012) Kinetic modeling of batch photofermentation hydrogen gas production by Rhodopseudomonas palustris PBUM001. Journal of Renewable and Sustainable Energy, 4 (4). ISSN 1941-7012

Jamil, Z.; Mohamad Annuar, M.S.; Ibrahim, S.; Vikineswary, S. (2009) Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design. International Journal of Hydrogen Energy, 34 (17). pp. 7502-7512. ISSN 0360-3199

Jayatissa , B.; Edzan, N.N. (2002) Information marketing in Sri Lankan academic libraries. Malaysian Journal of Library & Information Science, 7 (2). pp. 87-100.

Jeirani, Z.; Mohamed Jan, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) The Effect of Polymer on Triglyceride Microemulsion Formulation for Tertiary Oil Recovery. Industrial and Engineering Chemistry Research, 52 (44). pp. 15589-15593. ISSN 0888-5885

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Correlations between interfacial tension and cumulative tertiary oil recovery in a triglyceride microemulsion flooding. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1310-1314. ISSN 1226-086X

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Formulation and phase behavior study of a nonionic triglyceride microemulsion to increase hydrocarbon production. Industrial Crops and Products, 43. pp. 15-24. ISSN 0926-6690

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Formulation, optimization and application of triglyceride microemulsion in enhanced oil recovery. Industrial Crops and Products, 43. pp. 6-14. ISSN 0926-6690

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Prediction of Phase-Inversion Temperature of a Triglyceride Microemulsion Using Design of Experiments. Industrial & Engineering Chemistry Research, 52 (2). pp. 744-750. ISSN 0888-5885

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1304-1309. ISSN 1226-086X

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2013) Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 554-560. ISSN 1226-086X

Jeirani, Z.; Mohamed Jan, B.; Si Ali, B.; Noor, I.M.; See, C.H.; Saphanuchart, W. (2012) The optimal mixture design of experiments: Alternative method in optimizing the aqueous phase composition of a microemulsion. Chemometrics and Intelligent Laboratory Systems, 112. pp. 1-7. ISSN 0169-7439

Jeong, J.H.; Din, N.C.; Otsuru, T.; Kim, H.C. (2010) An application of a noise maps for construction and road traffic noise in Korea. International Journal of The Physical Sciences, 5 (7). pp. 1063-1073.

Jeyabalan, V.; Samraj, A.; Kiong, L.C. (2008) Motor imaginary signal classification using adaptive recursive bandpass filter and adaptive autoregressive models for brain machine interface designs. International Journal of Biological and Medical Sciences, 3 (4). pp. 231-238.

Jeyabalan, V.; Samraj, A.; Loo, C.K. (2010) Motor imaginary-based brain machine interface design using programmable logic controllers for the disabled. Computer Methods in Biomechanics and Biomedical Engineering, 13 (5). pp. 617-623. ISSN 1025-5842

Joshi, A.; Ismail, S.; Taqa, A.; Ng, L.S. (2011) High performance system for the interactive rendering of a 3D model into MPEG-4. International Journal of Advanced Engineering Sciences and Technologies, 4 (2). pp. 54-58. ISSN 2230-7818

Kabir, S.M.A.; Alengaram, U.J.; Jumaat, M.Z.; Sharmin, A.; Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434

Kadri, N.A.; Ahamad, A.R.; Abdul-Latip, E.N.; Azlan, C.A.; Raha, M.G.; Mohd-Nasir, N.F. (2007) Temperature modeling of therapeutic ultrasound: a preliminary finding. Biomeds. pp. 594-597.

Kadri, N.A.; Hoettges, K.F.; Hughes, M.P. (2008) Microelectrode fabrication using Indium Tin Oxide (ITO) for microfluidic devices employing dielectrophoresis. Biomeds, 21 IFM. pp. 719-722. ISSN 16800737 (ISSN)

Kadri, N.A.; Ng, K.H. (2010) BIIJ embracing social media. Biomedical Imaging and Intervention Journal, 6 (1). ISSN 18235530 (ISSN)

Kadri, N.A.; Raha, M.G. (2006) Creating animated medical images (Part 1). Biomedical Imaging and Intervention Journal, 2 (2).

Kadri, N.A.; Raha, M.G. (2006) Creating animated medical images (Part 2). Biomedical imaging and intervention journal, 2 (3).

Kadri, N.A.; Raha, M.G.; Murphy, B.P. (2011) Polyvinyl alcohol as a viable membrane in artificial tissue design and development. Clinics, 66 (8). pp. 1489-1493. ISSN 18075932 (ISSN)

Kadri, N.A.; Razak, M.A.A.; Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 1452-3981

Kadri, N.A.; Razak, M.A.A.; Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 14523981

Kadri, N.A.; Tan, L.K.; Ng, K.H. (2009) Riding on the crest of electronic publishing wave. Biomedical Imaging and Intervention Journal, 5 (1). ISSN 18235530 (ISSN)

Kahourzade, S.; Mahmoudi, A.; Bin Mokhlis, H. (2015) A comparative study of multi-objective optimal power flow based on particle swarm, evolutionary programming, and genetic algorithm. Electrical Engineering, 97 (1). pp. 1-12. ISSN 0948-7921

Kalwar, K.A.; Aamir, M.; Mekhilef, S. (2015) Inductively coupled power transfer (ICPT) for electric vehicle charging - A review. Renewable & Sustainable Energy Reviews, 47. pp. 462-475. ISSN 1364-0321

Kamaralzaman, S.; Kaur, K. (2009) Quality management of reference services in Malaysian public university libraries. Libri, 59 (2). pp. 104-113. ISSN 1865-8423

Kamil, N.S.M.; Dawal, S.Z.M. (2015) Effect of postural angle on back muscle activities in aging female workers performing computer tasks. Journal of Physical Therapy Science, 27 (6). pp. 1967-1970. ISSN 0915-5287

Kanadasan, J.; Razak, H.A. (2015) Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. Journal of Cleaner Production, 89. pp. 78-86. ISSN 0959-6526

Kanagasabi, S.; Kang, Y.L.; Manickam, M.; Ibrahim, S.; Pichiah, S. (2013) Intimate coupling of electro and biooxidation of tannery wastewater. Desalination and Water Treatment, 51 (34-36). pp. 6617-6623. ISSN 1944-3994

Kang, K.; Jang, M.; Cui, M.; Qiu, P.; Na, S.; Son, Y.; Khim, J. (2015) Enhanced sonocatalytic treatment of ibuprofen by mechanical mixing and reusable magnetic core titanium dioxide. Chemical Engineering Journal, 264. pp. 522-530. ISSN 1385-8947

Kang, Y.L.; Poon, M.Y.; Monash, P.; Ibrahim, S.; Saravanan, P. (2013) Surface chemistry and adsorption mechanism of cadmium ion on activated carbon derived from Garcinia mangostana shell. Korean Journal of Chemical Engineering, 30 (10). pp. 1904-1910. ISSN 0256-1115

Kang, Y.L.; Toh, S.K.S.; Monash, P.; Ibrahim, S.; Saravanan, P. (2013) Adsorption isotherm, kinetic and thermodynamic studies of activated carbon prepared from Garcinia mangostana shell. Asia-Pacific Journal of Chemical Engineering, 8 (6). pp. 811-818. ISSN 1932-2135

Kareem, S.A.; Raviraja, S.; Awadh, N.A.; Kamaruzaman, A.; Kajindran, A. (2010) Classification and regression tree in prediction of survival of AIDS patients. Malaysian Journal of Computer Science, 23 (3). pp. 153-165.

Karim, M.E.; Munir, A.; Reza, A.W.; Muhammad-Sukki, F.; Yasin, S.H.M.; Abu-Bakar, S.H.; Rahim, R.A. (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting and Social Change, 92. pp. 168-181. ISSN 0040-1625

Kasirun, Z.M. (2005) A Survey on the requirements elicitation practices among courseware developers. Malaysian Journal of Computer Science, 18 (1). pp. 70-77.

Kasirun, Z.M.; Amirudin, B. (2000) ISAT903, an assessment tool on the quality system for software industry. Malaysian Journal of Computer Science, 13 (1). pp. 34-47.

Kasirun, Z.M.; Salim, S.S. (2008) Assessing the needs of CSCL tool and its impacts in Malaysian context. WSEAS Transactions on Computer Research, 3 (5). pp. 300-310. ISSN 1991-8755

Kasirun, Z.M.; Salim, S.S. (2004) Potential of computer-supported collaborative learning application use in Malaysian schools. The International Arab Journal of Information Technology, 1 (2). pp. 187-195.

Kasirun, Z.M.; Salim, S.S. (2002) A survey on requirements elicitation for computer-supported collaborative learning (cscl) application development among software developers - a Malaysian perspective. International Journal of Information Technology, 3. pp. 89-102.

Katiyar, P.; Mahadi, W.N.L.W. (2015) Impact analysis on distance variation between patch antenna and metamaterial. Microwave and Optical Technology Letters, 57 (1). pp. 178-183. ISSN 0895-2477

Katiyar, P.R.; Mahadi, W.N.L.B.W. (2015) Gain improvement of microstrip patch antenna using CLS split ring resonator metamaterial. Frequenz, 69 (3-4). pp. 95-103. ISSN 0016-1136

Kaur, K. (2000) Citation analysis of journal of natural rubber research, 1988-1997. Malaysian Journal of Library & Information Science, 5 (2). pp. 45-56.

Kaur, K. (2009) Marketing the academic library on the web. Library Management, 30 (6/7). pp. 454-468. ISSN 0143-5124

Kaur, K.; Diljit, S. (2011) Antecedents of customer loyalty: Does service quality suffice? Malaysian Journal of Library & Information Science, 16 (2). ISSN 1394-6234

Kaviani, S.; Hassanli, A.M.; Homayounfar, M. (2015) Optimal crop water allocation based on constraint-state method and nonnormal stochastic variable. Water Resources Management, 29 (4). pp. 1003-1018. ISSN 0920-4741

Kazemzadeh, A.; Ganesan, P.; Ibrahim, F.; He, S.; Madou, M.J. (2013) The effect of contact angles and capillary dimensions on the burst frequency of super hydrophilic and hydrophilic centrifugal microfluidic platforms, a CFD study. PLoS ONE, 8 (9). pp. 1-12. ISSN 19326203

Kazemzadeh, A.; Ganesan, P.; Ibrahim, F.; Kulinsky, L.; Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. Rsc Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069

Kazi, S.N.; Badarudin, A.; Zubir, M.N.M.; Ming, H.N.; Misran, M.; Sadeghinezhad, E.; Mehrali, M.; Syuhada, N.I. (2015) Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets. Nanoscale Research Letters, 10. p. 15. ISSN 1556-276X

Kazi, S.N.; Duffy, G.G.; Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311

Kazi, S.N.; Teng, K.H.; Zakaria, M.S.; Sadeghinezhad, E.; Bakar, M.A. (2015) Study of mineral fouling mitigation on heat exchanger surface. Desalination, 367. pp. 248-254. ISSN 0011-9164

Keshavarz, H.; Sattari, M.R.J.; Noor, R.M. (2012) Session initiation protocol attacks and challenges. arXiv preprint arXiv:1205.0480.

Khamis, N.; Idris, S.; Ahmad, R.; Idris, N. (2008) Assessing object-oriented programming skills in the core education of computer science and information technology: Introducing new possible approach. WSEAS Transactions on Computers, 7 (9). pp. 1427-1436. ISSN 1109-2750

Khan, A.N.; Mat Kiah, M.L.; Khan, S.U.; Madani, S.A. (2012) Towards secure mobile cloud computing: a survey. Future Generation Computer Systems. ISSN 0167-739X

Khan, M.M.A.; Ismail, M.F.B.; Dimyati, K. (2010) Interworking between WiMAX and UMTS to provide seamless services. International Journal of the Physical Sciences, 5 (6). pp. 852-864.

Khan, M.N.; Ismail, E.; Yusof, N.S.M. (2010) A new empirical kinetic method for the determination of ion-exchange constants for the counterions of cationic micelles: The rate of piperidinolysis and hydrolysis of anionic phenyl salicylate as the kinetic probes. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 361 (1-3). pp. 150-161.

Khan, S.; Gani, A. (2012) Model of complex searching over structured P2P overlay under dynamic environment. International Journal of Information and Electronics Engineering, 2 (2). pp. 146-150.

Khanlou, H.M.; Ang, B.C.; Talebian, S.; Afifi, A.M.; Andriyana, A. (2015) Electrospinning of polymethyl methacrylate nanofibers: Optimization of processing parameters using the Taguchi design of experiments. Textile Research Journal, 85 (4). pp. 356-368. ISSN 0040-5175

Khanlou, H.M.; Ang, B.C.; Talebian, S.; Barzani, M.M.; Silakhori, M.; Fauzi, H. (2015) A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization. Measurement, 70. pp. 179-187. ISSN 0263-2241

Kho, F.W.L.; Law, P.L.; Ibrahim, S.H.; Sentian, J. (2007) Carbon monoxide levels along roadway. International Journal of Environmental Science and Technology, 4 (1). pp. 27-34. ISSN 1735-1472

Kiah, M.L.M.; Martin, K.M. (2008) Host mobility protocol for secure group communication in wireless mobile environments. International Journal of Security and its Applications, 2 (1). pp. 100-107.

Kiah, M.L.M.; Qabajeh, L.K.; Qabajeh, M.M. (2010) Unicast position-based routing protocols for ad-hoc networks. Acta Polytechnica Hungarica, 7 (5). pp. 19-46.

Kibria, M.A.; Anisur, M.R.; Mahfuz, M.H.; Saidur, R.; Metselaar, I.H.S.C. (2015) A review on thermophysical properties of nanoparticle dispersed phase change materials. Energy Conversion and Management, 95. pp. 69-89. ISSN 0196-8904

Kim, K.; Cho, E.; Thokchom, B.; Cui, M.; Jang, M.; Khim, J. (2015) Synergistic sonoelectrochemical removal of substituted phenols: Implications of ultrasonic parameters and physicochemical properties. Ultrasonics Sonochemistry, 24. pp. 172-177. ISSN 1350-4177

Kiong, L.C.; Rajeswari, M.; Rao, M.V.C. (2003) Nonlinear dynamic system identification and control via self-regulating modular neural network. Neural Network World, 13 (4). ISSN 1210-0552

Kiran, K. (2010) Service quality and customer satisfaction in academic libraries: Perspectives from a Malaysian university. Library Review, 59 (4). pp. 261-273. ISSN 0024-2535

Kiran, K.; Diljit, S. (2012) Modeling web-based library service quality. Library & Information Science Research, 34 (3). pp. 184-196. ISSN 0740-8188

Krishnasamy, Kemalatha; Lee, Sai; Palaniappan, Sellappan (2003) Effective design of e-learning application incorporating multiple intelligences. Digital Libraries: Technology and Management of Indigenous Knowledge for Global Access, 2911. pp. 693-694. ISSN 0302-9743

Krishnasamy, Kemalatha; Lee, Sai Peck; Palaniappan, Ananda Kumar (2006) Alternative learning approaches for electronic learning environments in smart schools: survey results. The International Arab Journal of Information Technology, 3 (2). pp. 149-156.

Ku, P.X.; Abu Osman, N.A.; Wan Abas, W.A.B. (2014) Balance control in lower extremity amputees during quiet standing: a systematic review. Gait and Posture, 39 (2). pp. 672-682. ISSN 09666362

Ku , P.X.; Abu Osman, N.A.; Yusof, A.; Wan Abas, W.A.B. (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Kum, Lee Ching; Lee, Sai Peck (2005) Integrating XML with relational databases using middleware approach. Malaysian Journal of Computer Science, 18 (2). pp. 1-10. ISSN 0127-9084

Kumar, N.; Anand, L. (2015) Broadband high performance laterally diffused metal-oxide-semiconductor power amplifier for mobile two-way radio applications. IET Circuits, Devices and Systems, 9 (4). pp. 283-289. ISSN 1751-858X

Kundu, A.; Sen Gupta, B.; Hashim, M.A.; Sahu, J.N.; Mujaware, M.; Redzwan, G. (2015) Optimisation of the process variables in production of activated carbon by microwave heating. RSC Advances, 5 (45). pp. 35899-35908. ISSN 2046-2069

Kwek, L.C.; Kang, C.C.; Loo, C.K.; Wong, E.K. (2005) Implementation of evolutionary active force control in a 5-link biped robot. Intelligent Automation and Soft Computing, 11 (3). pp. 167-178. ISSN 1079-8587

Kwek, L.C.; Wong, E.K.; Loo, C.K.; Rao, M.V.C. (2003) Application of active force control and iterative learning in a 5-link biped robot. Journal of Intelligent & Robotic Systems, 37 (2). pp. 143-162.

Laghari, J.A.; Mokhlis, H.; Karimi, M.; Bakar, A.H.A.; Mohamad, H. (2015) An islanding detection strategy for distribution network connected with hybrid DG resources. Renewable & Sustainable Energy Reviews, 45. pp. 662-676. ISSN 1364-0321

Lahsasna, A.; Ainon, R.N.; Teh, Y.W. (2010) Credit scoring models using soft computing methods: A survey. International Arab Journal of Information Technology, 7 (2). pp. 115-123.

Lam, W.H.; Chen, L.; Hashim, R. (2015) Analytical wake model of tidal current turbine. Energy, 79. pp. 512-521. ISSN 0360-5442

Lashkari, A.H.; Gani, A.; Sabet, L.G.; Farmand, S. (2010) A new algorithm on Graphical User Authentication (GUA) based on multi-line grids. Scientific Research and Essays, 5 (24). pp. 3865-3875. ISSN 1992-2248

Latef, T.A.; Khamas, S.; Reza, A.W. (2015) Gain enhancement for circularly polarized double layered printed hemispherical helical antenna arrays. Journal of Electromagnetic Waves and Applications, 29 (10). pp. 1342-1353. ISSN 0920-5071

Latibari, S.T.; Mehrali, M.; Mahlia, T.M.I.; Afifi, A.B.M.; Akhiani, A.R.; Metselaar, H.S.C. (2015) Facile synthesis and thermal performances of stearic acid/titania core/shell nanocapsules by sol-gel method. Energy, 85. pp. 635-644. ISSN 0360-5442

Lee, C.; Baba, M.S. (2005) The Intelligent Web-Based Tutoring System using the C++ Standard Template Library. Malaysian Online Journal of Instructional Technology (MOJIT), 2 (3). pp. 34-42. ISSN 1823-1144

Lee, C.S.; Aroua, M.K.; Daud, W.M.A.W.; Cognet, P.; Peres-Lucchese, Y.; Fabre, P.L.; Reynes, O.; Latapie, L. (2015) A review: Conversion of bioglycerol into 1,3-propanediol via biological and chemical method. Renewable & Sustainable Energy Reviews, 42. pp. 963-972. ISSN 1364-0321

Lee, G.C.; Loo, C.K.; Chockalingam, L. (2012) An integrated approach for head gesture based interface. Applied Soft Computing, 12 (3). pp. 1101-1114. ISSN 1568-4946

Lee, H.V.; Juan, J.C.; Taufiq-Yap, Y.H.; Kong, P.S.; Rahman, N.A. (2015) Advancement in heterogeneous base catalyzed technology: An efficient production of biodiesel fuels. Journal of Renewable and Sustainable Energy, 7 (3). p. 46. ISSN 1941-7012

Lee, J.S.; Chan, C.S.; Chang, C.C. (2009) Non-iterative privacy preservation for online lotteries. IET Information Security, 3 (4). pp. 139-147. ISSN 1751-8709

Lee, K.H.; Teh, K.H. (2001) Evaluation of academic library web sites in Malaysia. Malaysian Journal of Library & Information Science, 5 (2). pp. 95-108.

Lee, S.L.; Saidur, R.; Sabri, M.F.M.; Min, T.K. (2015) Molecular dynamic simulation on the thermal conductivity of nanofluids in aggregated and non-aggregated states. Numerical Heat Transfer Part a-Applications, 68 (4). pp. 432-453. ISSN 1040-7782

Lee, S.P.; Zildzic, D. (2006) Oracle database workload performance measurement and tuning toolkit. Issues in Informing Science and Information Technology, 3. ISSN 1547-5840

Lee, Sai Peck; Rolland, Colette (2000) Achieving reuse via a generic model of reusable components. International journal of modelling & simulation, 20 (1). pp. 12-19. ISSN 0228-6203

Lee, Sai Peck; Thin, Siew Khim; Liu, Hong Song (2000) Object-oriented application framework on manufacturing domain. Malaysian Journal of Computer Science, 13 (1). pp. 56-64. ISSN 0127-9084

Lee, W.S.; Chua, A.S.M.; Yeoh, H.K.; Nittami, T.; Ngoh, G.C. (2015) Strategy for the biotransformation of fermented palm oil mill effluent into biodegradable polyhydroxyalkanoates by activated sludge. Chemical Engineering Journal, 269. pp. 288-297. ISSN 1385-8947

Leong, K.E.; Alexander, N. (2014) College students attitude and mathematics achievement using web based homework. Eurasia Journal of Mathematics Science and Technology Education, 10 (6). pp. 609-615.

Leow, R.S.; Moghavvemi, M.; Ibrahim, F. (2010) An efficient low-cost real-time brain computer interface system based on SSVEP. IEICE Electronics Express, 7 (5). pp. 326-331. ISSN 1349-2543

Liau, K.F.; Shoji, T.; Ong, Y.H.; Chua, A.S.M.; Yeoh, H.K.; Ho, P.Y. (2015) Kinetic and stoichiometric characterization for efficient enhanced biological phosphorus removal (EBPR) process at high temperatures. Bioprocess and Biosystems Engineering, 38 (4). pp. 729-737. ISSN 1615-7591

Liew, W.S.; Seera, M.; Loo, C.K.; Lim, E. (2015) Affect classification using genetic-optimized ensembles of fuzzy ARTMAPs. Applied Soft Computing, 27. pp. 53-63. ISSN 1568-4946

Liew, Y.M.; McLaughlin, R.A.; Chan, B.T.; Aziz, Y.F.A.; Chee, K.H.; Ung, N.M.; Tan, L.K.; Lai, K.W.; Ng, S.; Lim, E. (2015) Motion corrected LV quantification based on 3D modelling for improved functional assessment in cardiac MRI. Physics in Medicine and Biology, 60 (7). pp. 2715-2733. ISSN 0031-9155

Lim, C.K.; Chan, C.S. (2011) Logical connectives and operativeness of BK sub-triangle product in fuzzy inferencing. International Journal of Fuzzy Systems, 13 (4). pp. 237-245. ISSN 1562-2479

Lim, K.M.; Loo, C.K.; Lim, W.S. (2010) Autonomous and deterministic supervised fuzzy clustering. Neural Network World, 20 (6). pp. 705-721. ISSN 1210-0552

Lim, M.W.; Lau, E.V.; Poh, P.E.; Chong, W.T. (2015) Interaction studies between high-density oil and sand particles in oil flotation technology. Journal of Petroleum Science and Engineering, 131. pp. 114-121. ISSN 0920-4105

Lim, P.K.; Ng, S.C.; Jassim, W.A.; Redmond, S.J.; Zilany, M.; Avolio, A.; Lim, E.; Tan, M.P.; Lovell, N.H. (2015) Improved measurement of blood pressure by extraction of characteristic features from the cuff oscillometric waveform. Sensors, 15 (6). pp. 14142-14161. ISSN 14142-14161

Lim, Tong; Lee, Sai (2003) Object-to-Multidimensional database mapping algorithms. Digital Libraries: Technology and Management of Indigenous Knowledge for Global Access, 2911. pp. 556-562. ISSN 0302-9743

Lim, Tong Ming; Lee, Sai Peck (2002) A proposed object schema management tool. Malaysian Journal of Computer Science, 15 (1). pp. 77-83. ISSN 0127-9084

Liza, S.; Ohtake, N.; Akasaka, H.; Munoz-Guijosa, J.M. (2015) Tribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition. Science and Technology of Advanced Materials, 16 (3). p. 13. ISSN 1468-6996

Loh, K.K.; Yeo, K.S.; Shee, Y.G.; Adikan, F.R.M.; Mahdi, M.A. (2015) Microwave photonic filter using multiwavelength brillouin-erbium fiber laser. Ieee Photonics Technology Letters, 27 (1). pp. 65-68. ISSN 1041-1135

Lokman, A.; Arof, H.; Harun, S.W. (2015) Dumbbell shaped inline Mach-Zehnder interferometer for glucose detection. Measurement, 59. pp. 167-170. ISSN 0263-2241

Lokman, A.; Arof, H.; Harun, S.W. (2015) Tapered fiber coated with hydroxyethyl cellulose/polyvinylidene fluoride composite for relative humidity sensor. Sensors and Actuators a-Physical, 225. pp. 128-132. ISSN 0924-4247

Loo, C.K.; Law, A.; Lim, W.S.; Rao, M.V.C. (2006) Probabilistic ensemble simplified fuzzy ARTMAP for sonar target differentiation. Neural Computing & Applications, 15 (1). pp. 79-90. ISSN 0941-0643

Loo, C.K.; Liew, W.S.; Seera, M.; Lim, E. (2015) Probabilistic ensemble fuzzy ARTMAP optimization using hierarchical parallel genetic algorithms. Neural Computing & Applications, 26 (2). pp. 263-276. ISSN 0941-0643

Loo, C.K.; Perus, M.; Bischof, H. (2005) Object recognition using quantum holography with neural-net preprocessing. Journal of optical technology, 72 (5). pp. 358-363.

Loo, C.K.; Peruš, M.; Bischof, H. (2004) Associative memory based image and object recognition by quantum holography. Open Systems & Information Dynamics, 11 (3). pp. 277-289. ISSN 1230-1612

Loo, C.K.; Peruš, M.; Bischof, H. (2005) Simulated quantum-optical object recognition from high-resolution images. Optics and Spectroscopy, 99 (2). pp. 218-223. ISSN 0030-400X

Loo, C.K.; Rajeswari, M.; Rao, M.V.C. (2004) Novel direct and self-regulating approaches to determine optimum growing multi-experts network structure. Neural Networks, IEEE Transactions on Neural Networks, 15 (6). pp. 1378-1395. ISSN 1045-9227

Loo, C.K.; Rajeswari, M.; Rao, M.V.C. (2006) Robust incremental growing multi-experts network. Applied Soft Computing, 6 (2). pp. 139-153. ISSN 1568-4946

Loo, C.K.; Rajeswari, M.; Wong, E.K.; RaoTask, M.V.C. (2004) Mobile robot path planning using hybrid genetic algorithm and traversability vectors method. Intelligent Automation and Soft Computing, 10 (1). pp. 51-64. ISSN 1079-8587

Loo, C.K.; Rao, M.V.C. (2005) Accurate and reliable diagnosis and classification using probabilistic ensemble simplified fuzzy ARTMAP. IEEE Transactions on Knowledge and Data Engineering, 17 (11). pp. 1589-1593. ISSN 1041-4347

Loo, C.K.; Samraj, A.; Lee, G.C. (2011) Evaluation of methods for estimating fractal dimension in motor imagery-based brain computer interface. Discrete Dynamics in Nature and Society, 2011. ISSN 1026-0226

Loo, M.S.; Le Cam, J.B.; Andriyana, A.; Robin, E.; Afifi, A.M. (2015) Fatigue of swollen elastomers. International Journal of Fatigue, 74. pp. 132-141. ISSN 0142-1123

Loo, P.L.; Chong, V.C.; Ibrahim, S.; Sabaratnam, V. (2015) Manipulating culture conditions and feed quality to increase the survival of larval marble goby oxyeleotris marmorata. North American Journal of Aquaculture, 77 (2). pp. 149-159. ISSN 1522-2055

Low, W.S.; Abas, W.A.W. (2015) Benchtop technologies for circulating tumor cells separation based on biophysical properties. Biomed Research International. p. 22. ISSN 2314-6133

Lwin, N.; Ahmad Fauzi, M.N.; Sreekantan, S.; Othman, R. (2015) Physical and electromagnetic properties of nanosized Gd substituted Mg–Mn ferrites by solution combustion method. Physica B: Condensed Matter, 461. pp. 134-139. ISSN 0921-4526

Lwin, N.; Othman, R.; Sreekantan, S.; Fauzi, M.N.A. (2015) Study on the structural and electromagnetic properties of Tm-substituted Mg-Mn ferrites by a solution combustion method. Journal of Magnetism and Magnetic Materials, 385. pp. 433-440. ISSN 0304-8853

Maghami, M.; Navabi Asl, S.; Rezadad, M.i.; Ale Ebrahim, N.; Gomes, C. (2015) Qualitative and quantitative analysis of solar hydrogen generation literature from 2001 to 2014. Scientometrics, 105 (2). pp. 759-771.

Mahbubul, I.M.; Saadah, A.; Saidur, R.; Khairul, M.A.; Kamyar, A. (2015) Thermal performance analysis of Al2O3/R-134a nanorefrigerant. International Journal of Heat and Mass Transfer, 85. pp. 1034-1040. ISSN 0017-9310

Mahbubul, I.M.; Saidur, R.; Amalina, M.A.; Elcioglu, E.B.; Okutucu-Ozyurt, T. (2015) Effective ultrasonication process for better colloidal dispersion of nanofluid. Ultrasonics Sonochemistry, 26. pp. 361-369. ISSN 1350-4177

Mahdavi, S.H.; Razak, H.A. (2015) A comparative study on optimal structural dynamics using wavelet functions. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdavi, S.H.; Razak, H.A. (2015) An efficient iterative scheme using family of chebyshev's operations. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdiraji, G.A.; Adikan, F.R.M.; Bradley, D.A. (2015) Collapsed optical fiber: A novel method for improving thermoluminescence response of optical fiber. Journal of Luminescence, 161. pp. 442-447. ISSN 0022-2313

Maher, I.; Eltaib, M.E.H.; Sarhan, A.A.D.; El-Zahry, R.M. (2015) Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining. International Journal of Advanced Manufacturing Technology, 76 (5-8). pp. 1459-1467. ISSN 0268-3768

Maher, I.; Sarhan, A.A.D.; Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768

Mahlia, T.M.I.; Yanti, P.A.A. (2010) Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors. Journal of Cleaner Production, 18 (4). pp. 365-374.

Mahmoodian, R.; Hamdi, M.; Hassan, M.A.; Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. Plos One, 10 (6). p. 10. ISSN 1932-6203

Majeed, A.; Mat Kiah, M.L.; Madhloom, H.T.; Zaidan, B.B.; Zaidan, A.A. (2009) Novel approach for high secure and high rate data hidden in the image using image texture analysis. International Journal of Engineering and Technology, 1 (2). pp. 63-69. ISSN 0975-4024

Makinejad, M.D.; Abu Osman, N.A.; Wan Abas, W.A.B.; Bayat, M. (2013) Preliminary analysis of knee stress in full extension landing. Clinics, 68 (9). pp. 1180-1188. ISSN 1807-5932

Malek, S.; Salleh, A.; Milow, P.; Baba, M.S.; Sharifah, S.A. (2012) Applying artificial neural network theory to exploring diatom abundance at tropical Putrajaya Lake, Malaysia. Journal of Freshwater Ecology, 27 (2). pp. 211-227. ISSN 0270-5060

Mamun, N.; Jassim, W.A.; Zilany, M.S.A. (2015) Prediction of speech intelligibility using a neurogram orthogonal polynomial measure (NOPM). Ieee-Acm Transactions on Audio Speech and Language Processing, 23 (4). pp. 760-773. ISSN 2329-9290

Mandiraji, G.A.; Ghomeishi, M.; Dermosesian, E.; Hashim, S.; Ung, N.M.; Adikan, F.R.M.; Bradley, D.A. (2015) Optical fiber based dosimeter sensor: Beyond TLD-100 limits. Sensors and Actuators A: Physical, 222. pp. 48-57. ISSN 0924-4247

Mansoori, M.; Zakaria, O.; Gani, A. (2012) Improving exposure of intrusion deception system through implementation of hybrid honeypot. The International Arab Journal of Information Technology, 9 (5). pp. 436-444.

Mansouri, M.; Salamonsen, R.F.; Lim, E.; Akmeliawati, R.; Lovell, N.H. (2015) Preload-based starling-like control for rotary blood pumps: Numerical comparison with pulsatility control and constant speed operation. Plos One, 10 (4). p. 16. ISSN 1932-6203

Mansourvar, M.; Raj, R.G.; Ismail, M.; Kareem, S.A.; Shanmugam, S.; Wahid, S.; Mahmud, R.; Abdullah, R.; Nasaruddin, F.; Idris, N. (2012) Automated Web Based System for Bone Age Assessment Using Histogram Technique. Malaysian Journal of Computer Science, 25 (3). pp. 107-121. ISSN 0127-9084

Mansourvara, M.; Raj, R.G.; Ismail, M.A.; Kareem, S.A.; Shanmugam, S.; Wahid, S.; Mahmud, R.; Abdullah, R.H.; Nasaruddin, F.H.; Idris, N. (2012) Automated web based system for bone age assessment using historam technique. Malaysian Journal of Computer Science, 25 (3). pp. 107-121.

Masmiati, N.; Sarhan, A.A.D. (2015) Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach. Measurement, 60. pp. 267-275. ISSN 0263-2241

Masum, S.M.; Masjuki, H.H.; Kalam, M.A.; Palash, S.M.; Habibullah, M. (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86. pp. 230-237. ISSN 0959-6526

Mat Kiah, M.L.; Zaidan, B.B.; Zaidan, A.A.; Mohammed Ahmed, A.; Al-Bakri, S.H. (2011) A review of audio based steganography and digital watermarking. International Journal of Physical Sciences, 6 (16). pp. 3837-3850. ISSN 1992-1950

Maul, T.; Baba, S. (2011) Unsupervised learning in second-order neural networks for motion analysis. Neurocomputing, 74 (6). pp. 884-895. ISSN 0925-2312

Maul, T.; Baba, S.; Yusof, A. (2005) Dynamic inputs and attraction force analysis for visual invariance and transformation estimation. Advances in Natural Computation. pp. 407-408.

Mazari, S.A.; Si Ali, B.; Jan, B.M.; Saeed, I.M.; Nizamuddin, S. (2015) An overview of solvent management and emissions of amine-based CO2 capture technology. International Journal of Greenhouse Gas Control, 34. pp. 129-140. ISSN 1750-5836

Meau, Y.P.; Ibrahim, F.; Narainasamy, S.A.L.; Omar, R. (2006) Intelligent classification of electrocardiogram (ECG) signal using extended Kalman Filter (EKF) based neuro fuzzy system. Computer Methods and Programs in Biomedicine, 82 (2). pp. 157-168. ISSN 0169-2607

Medani, A.; Gani, A.; Zakaria, O.; Zaidan, A.A.; Zaidan, B.B. (2011) Review of mobile short message service security issues and techniques towards the solution. Scientific Research and Essays, 6 (6). pp. 1147-1165. ISSN 1992-2248

Mehrali, M.; Sadeghinezhad, E.; Rashidi, M.M.; Akhiani, A.R.; Latibari, S.T.; Mehrali, M.; Metselaar, H.S.C. (2015) Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids. Journal of Nanoparticle Research, 17 (6). p. 17. ISSN 1388-0764

Mehran, Q.M.; Bushroa, A.R.; Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243

Ming, Lim Tong; Lee, Sai Peck (2004) Extended object languages for the extolware persistence framework. Issues in Informing Science and Information Technology, 1. pp. 407-416. ISSN 1547-5840

Mirhassani, S.; Ong, H.C.; Chong, W.T.; Leong, K.Y. (2015) Advances and challenges in grid tied photovoltaic systems. Renewable & Sustainable Energy Reviews, 49. pp. 121-131. ISSN 1364-0321

Mirhassani, S.M.; Golroodbari, S.Z.M; Goiroodbari, S.M.M.; Mekhilef, S. (2015) An improved particle swarm optimization based maximum power point tracking strategy with variable sampling time. International Journal of Electrical Power & Energy Systems, 64. pp. 761-770. ISSN 0142-0615

Mirzaei, M.; Huang, Y.F.; El-Shafie, A.; Shatirah, A. (2015) Application of the generalized likelihood uncertainty estimation (GLUE) approach for assessing uncertainty in hydrological models: A review. Stochastic Environmental Research and Risk Assessment, 29 (5). pp. 1265-1273. ISSN 1436-3240

Mo, K.H.; Alengaram, U.J.; Jumaat, M.Z.; Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526

Mo, K.H.; Alengaram, U.J.; Visintin, P.; Goh, S.H.; Jumaat, M.Z. (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618

Mofijur, M.; Masjuki, H.H.; Kalam, M.A.; Rahman, S.M.A.; Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable & Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321

Mohamed, A.; Lee, S.P.; Salim, S.S. (2005) LiSER: a software experience management tool to support organisational learning in software development organisations. The International Arab Journal of Information Technology, 2 (1). pp. 10-16. ISSN 1683-3198

Mohameda, A.H.; Leeb, S.P.; Salim, S.S. (2004) An ontology-based knowledge model for software experience management. International Journal of The Computer, 14 (4). pp. 79-88.

Mohammadi, K.; Shamshirband, S.; Chong, W.T.; Arif, M.; Petkovic, D.; Sudheer, C. (2015) A new hybrid support vector machine–wavelet transform approach for estimation of horizontal global solar radiation. Energy Conversion and Management, 92. pp. 162-171. ISSN 0196-8904

Mohammadi, K.; Shamshirband, S.; Tong, C.W.; Arif, M.; Petkovic, D.; Ch, S. (2015) A new hybrid support vector machine wavelet transform approach for estimation of horizontal global solar radiation. Energy Conversion and Management, 92. pp. 162-171. ISSN 0196-8904

Mohammadi, M.; Musa, S.N.; Bahreininejad, A. (2015) Optimization of economic lot scheduling problem with backordering and shelf-life considerations using calibrated metaheuristic algorithms. Applied Mathematics and Computation, 251. pp. 404-422. ISSN 0096-3003

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M. (2012) Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater. Korean Journal of Chemical Engineering, 29 (10). pp. 1347-1351. ISSN 0256-1115

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M.; Ghafari, S.; Vikineswary, S.; Zinatizadeh, A.A. (2012) Influences of environmental and operational factors on dark fermentative hydrogen production: a review. Clean-Soil Air Water, 40 (11). pp. 1297-1305. ISSN 1863-0650

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M.; Law, S. (2011) Effects of different pretreatment methods on anaerobic mixed microflora for hydrogen production and COD reduction from palm oil mill effluent. Journal of Cleaner Production, 19 (14). pp. 1654-1658. ISSN 0959-6526

Mohammadi, P.; Ibrahim, S.; Mohamad Annuar, M.S. (2012) Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture. International Journal of Hydrogen Energy, 37 (23). pp. 17801-17808. ISSN 0360-3199

Mohammadian, E.; Hamidi, H.; Asadullah, M.; Azdarpour, A.; Motamedi, S.; Junin, R. (2015) Measurement of CO2 solubility in NaCl brine solutions at different temperatures and pressures using the potentiometric titration method. Journal of Chemical and Engineering Data, 60 (7). pp. 2042-2049. ISSN 1932-6203

Mohammadnejad, M.; Ghazvini, M.; Mahlia, T.M.I.; Andriyana, A. (2015) A review on energy scenario and sustainable energy in Iran. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4652-4658.

Mohd Sharif, M.S.; Zainab, A.N. (2004) Undergraduates in computer science and information technology using the internet as a resource. Malaysian Journal of Library & Information Science, 9 (1). pp. 1-16.

Mohktar, M.S.; Ibrahim, F.; Ismail, N.A. (2013) Non-invasive approach to predict the cholesterol level in blood using bioimpedance and neural network techniques. Biomedical Engineering - Applications, Basis and Communications, 25 (06). p. 1350046. ISSN 1793-7132

Monajemi, H.; Mazinani, I.; Chao, O.Z.; Yee, K.S.; Kuan, K.K.; Karim, R. (2015) Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64. pp. 157-162. ISSN 0263-2241

Moo, E.K.; Abu Osman, N.A.; Pingguan-Murphy, B.; Wan Abas, W.A.B.; Spence, W.D.; Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X

Moshwan, R.; Rahmat, S.M.; Yusof, F.; Hassan, M.A.; Hamdi, M.; Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282

Moshwan, R.; Yusof, F.; Hassan, M.A.; Rahmat, S.M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66. pp. 118-128. ISSN 0261-3069

Mostafizur, R.M.; Saidur, R.; Aziz, A.R.A.; Bhuiyan, M.H.U. (2015) Thermophysical properties of methanol based Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 85. pp. 414-419. ISSN 0017-9310

Motamedi, S.; Roy, C.; Shamshirband, S.; Hashim, R.; Petkovic, D.; Song, K.I. (2015) Prediction of ultrasonic pulse velocity for enhanced peat bricks using adaptive neuro-fuzzy methodology. Ultrasonics, 61. pp. 103-113. ISSN 0041-624X

Motamedi, S.; Shamshirband, S.; Hashim, R.; Petkovic, D.; Roy, C. (2015) Estimating unconfined compressive strength of cockle shell-cement-sand mixtures using soft computing methodologies. Engineering Structures, 98. pp. 49-58. ISSN 0141-0296

Motamedi, S.; Shamshirband, S.; Petkovic, D.; Hashim, R. (2015) Application of adaptive neuro-fuzzy technique to predict the unconfined compressive strength of PFA-sand-cement mixture. Powder Technology, 278. pp. 278-285. ISSN 0032-5910

Mousavi, S.; Ibrahim, S.; Aroua, M.K. (2013) Effects of operational parameters on the treatment of nitrate-rich wastewater by autohydrogenotrophic denitrifying bacteria. Water and Environment Journal. pp. 1-10. ISSN 17476585

Mousavi, S.; Ibrahim, S.; Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S.; Ibrahim, S.; Aroua, M.K.; Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - a review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mubarak, N.M.; Sahu, J.N.; Abdullah, E.C.; Jayakumar, N.S.; Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24. pp. 24-33. ISSN 1226-086X

Mubin, A.S.A.; Ahmad, N.; Mamat, A.; Taha, Z.; Hasanuddin, I. (2015) CFD study of drag and lift of sepak takraw ball at different face orientations. Advances in Mechanical Engineering, 7 (1). p. 9. ISSN 1687-8132

Mueen, A.; Baba, M.S.; Zainuddin, R. (2007) Multilevel feature extraction and X-ray image classification. Applied Sciences, 7 (8). pp. 1224-1229. ISSN 1812-5654

Mueen, A.; Zainuddin, R.; Baba, M.S. (2008) Automatic multilevel medical image annotation and retrieval. Journal of Digital Imaging, 21 (3). pp. 290-295. ISSN 0897-1889

Mueen, A.; Zainuddin, R.; Baba, M.S. (2010) MIARS: A Medical Image Retrieval System. Journal of Medical Systems, 34 (5). pp. 859-864. ISSN 0148-5598

Mukherjee, S.; Mukhopadhyay, S.; Hashim, M.A.; Sen Gupta, B. (2015) Contemporary environmental issues of landfill leachate: Assessment and remedies. Contemporary environmental issues of landfill leachate: assessment & remedies, 45 (5). pp. 472-590. ISSN 1064-3389

Mukherjee, S.; Mukhopadhyay, S.; Pariatamby, A.; Hashim, M.A.; Sahu, J.N.; Sen Gupta, B. (2014) A comparative study of biopolymers and alum in the separation and recovery of pulp fibres from paper mill effluent by flocculation. Journal of Environmental Sciences (China), 26 (9). pp. 1851-1860. ISSN 1001-0742

Mukhopadhyay, S.; Hashim, M.A.; Allen, M.; Sen Gupta, B. (2014) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology. pp. 1-16. (In Press)

Mukhopadhyay, S.; Hashim, M.A.; Allen, M.; Sen Gupta, B. (2015) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology, 12 (2). pp. 617-632. ISSN 1735-1472

Mukhopadhyay, S.; Hashim, M.A.; Sahu, J.N.; Yusoff, I.; Sen Gupta, B. (2013) Comparison of a plant based natural surfactant with SDS for washing of As(V) from Fe rich soil. Comparison of a plant based natural surfactant with SDS for washing of As(V) from Fe rich soil, 25 (11). pp. 2247-2256. ISSN 1001-0742

Mukhopadhyay, S.; Mukherjee, S.; Hashim, M.A.; Sen Gupta, B. (2015) Application of colloidal gas aphron suspensions produced from Sapindus mukorossi for arsenic removal from contaminated soil. Chemosphere, 119. pp. 355-362.

Munusamy, K.; Selamat, H.; Ibrahim, S.; Baba, M.S. (2011) A comparative study of process mediator components that support behavioral incompatibility. International Journal on Web Service Computing (IJWSC), 2 (3). pp. 11-30.

Murthy, G.R.; Arumugam, M.S.; Loo, C.K. (2009) Hybrid particle swarm optimization algorithm with fine tuning operators. International Journal of Bio-Inspired Computation, 1 (1-2). pp. 14-31. ISSN 1758-0366

Muslimin, M.; Wilson, J.J.; Ghazali, A.R.; Braima, K.A.; Jeffery, J.; Wan-Nor, F.; Alaa-Eldin, M.E.; Mohd-Zin, S.W.; Wan-Yusoff, W.S.; Norma-Rashid, Y.; Lau, Y.L.; Rohela, M.; Abdul-Aziz, N.M. (2015) First report of brown widow spider sightings in Peninsular Malaysia and notes on its global distribution. Journal of Venomous Animals and Toxins Including Tropical Diseases, 21. p. 8. ISSN 1678-9199

Mustayen, A.G.M.B.; Rahman, M.M.; Mekhilef, S.; Saidur, R. (2015) Performance evaluation of a solar powered air dryer for white oyster mushroom drying. International Journal of Green Energy, 12 (11). pp. 1113-1121. ISSN 1543-5075

Naderi, S.; Hassan, M.A.; Bushroa, A.R. (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069

Nagara, G.; Lam, W.H.; Lee, N.C.H.; Othman, F.; Shaaban, M.G. (2015) Comparative SWOT analysis for water solutions in Asia and Africa. Water Resources Management, 29 (1). pp. 125-138. ISSN 0920-4741

Narrein, K.; Sivasankaran, S.; Ganesan, P. (2015) Two-phase analysis of a helical microchannel heat sink using nanofluids. Numerical Heat Transfer Part a-Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782

Nasir, M.H.N.M.; Hamid, S.S.; Noor, M.K.M.; Kasirun, Z.M.; Othman, M.K. (2011) Using agents to improve the usability of the PSP automated tool. International Journal of the Physical Sciences, 6 (21). pp. 4977-4989. ISSN 1992-1950

Nasir, N.F.M.; Raha, M.G.; Kadri, K.N.; Rampado, M.; Azlan, C.A. (2006) The study of morphological structure, phase structure and molecular structure of collagen-PEO 600K blends for tissue engineering application. American Journal of Biochemistry and Biotechnology, 2 (4). pp. 175-179.

Nasir, N.F.M.; Zain, N.M.; Raha, M.G.; Kadri, N.A. (2005) Characterization of chitosan-poly (ethylene oxide) blends as haemodialysis membrane. American Journal of Applied Sciences, 2 (12). pp. 1578-1583.

Nasiri-Tabrizi, B.; Zalnezhad, E.; Pingguan-Murphy, B.; Basirun, W.J.; Hamouda, A.M.S.; Baradaran, S. (2015) Structural and morphological study of mechanochemically synthesized crystalline nanoneedles of Zr-doped carbonated chlorapatite. Materials Letters, 149. pp. 100-104. ISSN 0167-577X

Nee, L.S.; Khalil, M.; Jan, B.M.; Ali, B.S. (2015) Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study. Journal of Petroleum Science and Engineering, 129. pp. 178-188. ISSN 0920-4105

Neyamadpour, A.; Abdullah, W.A.T.W.; Taib, S. (2010) Inversion of quasi-3D DC resistivity imaging data using artificial neural networks. Journal of Earth System Science, 119 (1). pp. 27-40.

Neyamadpour, A.; Abdullah, W.A.T.W.; Taib, S.; Neyamadpour, B. (2010) Comparison of Wenner and dipole-dipole arrays in the study of an underground three-dimensional cavity. Journal of Geophysics and Engineering, 7 (1). pp. 30-40.

Ng, C.G.; Yusoff, S. (2015) Assessment of GHG emission reduction potential from source-separated organic waste (SOW) management: Case study in a higher educational institution in Malaysia. Sains Malaysiana, 44 (2). pp. 193-201. ISSN 0126-6039

Ng, H.S.; Tan, C.P.; Mokhtar, M.N.; Ibrahim, S.; Ariff, A.; Ooi, C.W.; Ling, T.C. (2012) Recovery of Bacillus cereus cyclodextrin glycosyltransferase and recycling of phase components in an aqueous two-phase system using thermo-separating polymer. Separation and Purification Technology, 89. pp. 9-15. ISSN 1383-5866

Ng, K.H.; Abdullah, B.J.J.; Kadri, N.A. (2008) A concern about plagiarism. Biomedical Imaging and Intervention Journal, 4 (2). ISSN 18235530 (ISSN)

Ng, K.H.; Abdullah, B.J.J.; Kadri, N.A. (2008) The journey so far. Biomedical Imaging and Intervention Journal, 4 (1). ISSN 18235530 (ISSN)

Ng, K.H.; Tan, L.K.; Kadri, N.A.; Lee, S.E.; Siow, H.L. (2006) Web-based educational portal on EMF for children. Bioengine. pp. 377-380.

Noor, R.M.; Edwards, C. (2011) Evaluating user class approach for network mobility protocol. Malaysian Journal of Computer Science, 24 (3). p. 131.

Noor, R.M.; Edwards, C. (2010) User class mechanisms for quality of service in network mobility. Scientific Research and Essays, 5 (24). pp. 3926-3931. ISSN 1992-2248

Noor, R.M.; Edwards, C. (2011) A comparative performance analysis on NEMO-QoS and MIPv6-QoS in heterogeneous environments. Journal of Applied Sciences, 11. pp. 3130-3141. ISSN 1812-5654

Noor, R.M.; Edwards, C. (2006) A dynamic QoS provisioning model for network mobility. The 7th Annual PostGraduate Symposium on The Convergence of Telecommunications, Networking and Broadcasting. pp. 26-27.

Noor, R.M.; Khorsandroo, S. (2011) Quality of experience key metrics framework for network mobility user. International Journal of the Physical Sciences, 6 (28). pp. 6521-6528. ISSN 1992 - 1950

Noraini, M.Y.; Ong, H.C.; Mohamed Jan, B.; Chong, W.T. (2014) A review on potential enzymatic reaction for biofuel production from algae. Renewable and Sustainable Energy Reviews, 39. pp. 24-34. ISSN 1364-0321

Nosrati, S.; Jayakumar, N.S.; Hashim, M.A.; Mukhopadhyay, S. (2013) Performance evaluation on vanadium transport through supported liquid membrane by TOMAC as carrier. Performance evaluation on vanadium transport through supported liquid membrane by TOMAC as carrier, 44 (3). pp. 337-342. ISSN 1876-1070

Olatomiwa, L.; Mekhilef, S.; Shamshirband, S.; Petkovic, D. (2015) Potential of support vector regression for solar radiation prediction in Nigeria. Natural Hazards, 77 (2). pp. 1055-1068. ISSN 0921-030X

Ong, K.S. (1974) A finite-difference method to evaluate the thermal performance of a solar water heater. Solar Energy, 16 (3-4). pp. 137-147. ISSN 0038092X

Ooi, C.W.; Tan, C.P.; Hii, S.L.; Ariff, A.; Ibrahim, S.; Ling, T.C. (2011) Primary recovery of lipase derived from Burkholderia sp. ST8 with aqueous micellar two-phase system. Process Biochemistry, 46 (9). pp. 1847-1852. ISSN 1359-5113

Ooi, M.E.; Sayuti, M.; Sarhan, A.A.D. (2015) Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89. pp. 286-295. ISSN 0959-6526

Oshkour, A.A.; Abu, O.N.A.; Davoodi, M.M.; Yau, Y.H.; Tarlochan, F.; Wan Abas, B.W.A.; Bayat, M. (2013) Finite element analysis on longitudinal and radial functionally graded femoral prosthesis. International Journal for Numerical Methods in Biomedical Engineering, 29 (12). pp. 1412-1427. ISSN 2040-7947

Oshkour, A.A.; Abu Osman, N.A.; Yau, Y.H.; Tarlochan, F.; Pramanik, S.; Wan Abas, W.A.B. (2013) Internal-external circumferential crack behaviour in the cement layer of total hip replacement. Fatigue & Fracture of Engineering Materials & Structures, 36 (7). pp. 586-601. ISSN 8756-758X

Oshkour, A.A.; Davoodi, M.M.; Abu Osman, N.A.; Yau, Y.H.; Tarlochan, F.; Abas, W.A.B.W. (2013) Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface. Materials & Design, 49. pp. 96-102. ISSN 0261-3069

Oshkour, A.A.; Talebi, H.; Shirazi, S.F.S.; Yau, Y.H.; Pramanik, S.; Tarlochan, F.; Abu Osman, N.A. (2015) Parametric study of radial functionally graded femoral prostheses with different geometries. Meccanica, 50 (7). pp. 1657-1678. ISSN 0025-6455

Othman, M.F.; Bushroa, A.R.; Abdullah, W.N.R. (2015) Evaluation techniques and improvements of adhesion strength for tin coating in tool applications: A review. Journal of Adhesion Science And Technology, 29 (7). pp. 569-591.

Pai, Y.S.; Yap, H.J.; Singh, R. (2015) Augmented reality-based programming, planning and simulation of a robotic work cell. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 229 (6). pp. 1029-1045. ISSN 0954-4054

Palash, S.M.; Masjuki, H.H.; Kalam, M.A.; Atabani, A.E.; Fattah, I.M.R.; Sanjid, A. (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91. pp. 149-157. ISSN 0196-8904

Palavalli, N.D.; Yaghoubi, A.; Lai, C.C.; Tin, C.C.; Javey, A.; Chueh, Y.L. (2015) Catalyst-dependent morphological evolution by interfacial stress in crystalline-amorphous core-shell germanium nanowires. Rsc Advances, 5 (36). pp. 28454-28459. ISSN 2046-2069

Panjehpour, M.; Chai, H.K.; Voo, Y.L. (2015) Refinement of strut-and-tie model for reinforced concrete deep beams. Plos One, 10 (6). p. 17. ISSN 1932-6203

Parker, E.; Vessillier, S.; Pingguan-Murphy, B.; Abas, W.A.; Bader, D.L.; Chowdhury, T.T. (2013) Low oxygen tension increased fibronectin fragment induced catabolic activities - response prevented with biomechanical signals. Arthritis Research & Therapy, 15 (5). R163. ISSN 1478-6354

Paul, M.C.; Dhar, A.; Das, S.; Latiff, A.A.; Ahmad, M.T.; Harun, S.W. (2015) Development of nanoengineered thulium-doped fiber laser with low threshold pump power and tunable operating wavelength. Ieee Photonics Journal, 7 (1). ISSN 1943-0655

Peake, N.J.; Pavlov, A.M.; D'Souza, A.; Pingguan-Murphy, B.; Sukhorukov, G.B.; Hobbs, A.J.; Chowdhury, T.T. (2015) Controlled release of C-type natriuretic peptide by microencapsulation dampens proinflammatory effects induced by IL-1 beta in cartilage explants. Biomacromolecules, 16 (2). pp. 524-531. ISSN 1525-7797

Peruš, M.; Bischof, H.; Caulfield, H.J.; Loo, C.K. (2004) Quantum-implementable selective reconstruction of high-resolution images. Applied Optics, 43 (33). pp. 6134-6138. ISSN 1539-4522

Peruš, M.; Bischof, H.; Loo, C.K. (2005) Bio-computational model of object-recognition: quantum Hebbian processing with neurally shaped Gabor wavelets. Biosystems, 82 (2). pp. 116-126. ISSN 0303-2647

Petkovic, D.; Gocic, M.; Trajkovic, S.; Shamshirband, S.; Motamedi, S.; Hashim, R.; Bonakdari, H. (2015) Determination of the most influential weather parameters on reference evapotranspiration by adaptive neuro-fuzzy methodology. Computers and Electronics in Agriculture, 114. pp. 277-284. ISSN 0168-1699

Petkovic, D.; Shamshirband, S.; Tong, C.W.; Al-Shammari, E.T. (2015) Generalized adaptive neuro-fuzzy based method for wind speed distribution prediction. Flow Measurement and Instrumentation, 43. pp. 47-52. ISSN 0955-5986

Pouran, S.R.; Aziz, A.R.A.; Daud, W.M.A.W.; Shamshirband, S. (2015) Estimation of the effect of catalyst physical characteristics on Fenton-like oxidation efficiency using adaptive neuro-fuzzy computing technique. Measurement, 59. pp. 314-328. ISSN 0263-2241

Pourtahmasb, M.S.; Karim, M.R.; Shamshirband, S. (2015) Resilient modulus prediction of asphalt mixtures containing recycled concrete aggregate using an adaptive neuro-fuzzy methodology. Construction and Building Materials, 82. pp. 257-263. ISSN 0950-0618

Pourtousi, M.; Sahu, J.N.; Ganesan, P.; Shamshirband, S.; Redzwan, G. (2015) A combination of computational fluid dynamics (CFD) and adaptive neuro-fuzzy system (ANFIS) for prediction of the bubble column hydrodynamics. Powder Technology, 274. pp. 466-481. ISSN 0032-5910

Poznanski, R.R.; Ng, L.S.; Woo, C.S. (2010) A method for estimating gap-junctional conductance between ca3 hippocampal pyramidal neurons. Journal of Integrative Neuroscience, 9 (01). pp. 49-64. ISSN 0219-6352

Primasari, B.; Ibrahim, S.; Annuar, M.S.M.; Remmie, L.X.I. (2011) Aerobic treatment of oily wastewater: effect of aeration and sludge concentration to pollutant reduction and PHB accumulation. World Academy of Science, Engineering and Technology, 78. pp. 172-176. ISSN 2010376X (ISSN)

Qabajeh, L.K.; Kiah, M.L.M.; Qabajeh, M. (2009) A qualitative comparison of position-based routing protocols for ad-hoc networks. International Journal of Computer Science and Network, 9 (2). pp. 131-140.

Qabajeh, L.K.; Kiah, M.L.M.; Qabajeh, M.M. (2011) Secure unicast position-based routing protocols for Ad-Hoc networks. Acta Polytechnica Hungarica, 8 (6). pp. 191-214.

Qabajeh, L.K.; Kiah, M.L.M.; Qabajeh, M.M. (2012) A more secure and scalable routing protocol for mobile ad hoc networks. Security and Communication Networks. ISSN 1939-0122

Qabajeh, L.K.; Kiah, M.L.M.; Qabajeh, M.M. (2009) A scalable and secure position-based routing protocols for ad-hoc networks. Malaysian Journal of Computer Science, 22 (2). pp. 99-120. ISSN 0127-9084

Qeshta, I.M.I.; Shafigh, P.; Jumaat, M.Z. (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618

Qi, H.; Huang, G.Y.; Han, Y.L.; Zhang, X.H.; Li, Y.H.; Pingguan-Murphy, B.; Lu, T.J.; Xu, F.; Wang, L. (2015) Engineering artificial machines from designable DNA materials for biomedical applications. Tissue Engineering Part B-Reviews, 21 (3). pp. 288-297. ISSN 1937-3368

Qurashi, A.; Irfan, M.F.; Alam, M.W. (2010) In2O3 nanostructures and their chemical and biosensor applications. Arabian Journal for Science and Engineering, 35 (1C). pp. 125-145.

Radjai, T.; Rahmani, L.; Mekhilef, S.; Gaubert, J.P. (2014) Implementation of a modified incremental conductance MPPT algorithm with direct control based on a fuzzy duty cycle change estimator using dSPACE. Solar Energy, 110. pp. 325-337.

Rafieerad, A.R.; Zalnezhad, E.; Bushroa, A.R.; Hamouda, A.M.S.; Sarraf, M.; Nasiri-Tabrizi, B. (2015) Self-organized TiO2 nanotube layer on Ti–6Al–7Nb for biomedical application. Surface & Coatings Technology, 265. pp. 24-31. ISSN 0257-8972

Rahim, N.A.; Radzi, M.A.M. (2010) DSP-based flexible digital hysteresis in switched capacitor active power filter. IEICE Electronics Express, 7 (9). pp. 621-627.

Rahim, R.; Raman, A.A.A. (2015) Cleaner production implementation in a fruit juice production plant. Journal of Cleaner Production, 101. pp. 215-221. ISSN 0959-6526

Rahimifar, M.; Salim, S.S. (2012) Structuring persistent chat conversations: experimental results of the chatsistance tool. Knowledge and Information Systems. pp. 1-21. ISSN 0219-1377

Rahman, A.M.S.; Chia, P.Y.; Haseeb, A.S.M.A (2015) Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation. Materials Letters, 147. pp. 50-53. ISSN 0167-577X

Rahman, H.A.; Rahim, H.R.A.; Harun, S.W.; Yasin, M.; Apsari, R.; Ahmad, H.; Wan Abas, W.A.B. (2013) Detection of stain formation on teeth by oral antiseptic solution using fiber optic displacement sensor. Optics and Laser Technology, 45 (1). pp. 336-341. ISSN 0030-3992

Rahman, M.D.A.; Said, S.M.; Balamurugan, S. (2015) Blue phase liquid crystal: Strategies for phase stabilization and device development. Science and Technology of Advanced Materials, 16 (3). p. 21. ISSN 1468-6996

Rahman, M.M.; Jumaat, M.Z.; Rahman, M.A.; Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618

Rahman, M.M.; Mustayen, A.G.M.B.; Mekhilef, S.; Saidur, R. (2015) The optimization of solar drying of grain by using a genetic algorithm. International Journal of Green Energy, 12 (12). pp. 1222-1231. ISSN 1543-5075

Rahman, M.M.; Oztop, H.F.; Mekhilef, S.; Saidur, R.; Orfi, J. (2015) Simulation of unsteady heat and mass transport with heatline and massline in a partially heated open cavity. Applied Mathematical Modelling, 39 (5-6). pp. 1597-1615. ISSN 0307-904X

Rahman, M.M.; Saha, S.; Mojumder, S.; Naim, A.G.; Saidur, R.; Ibrahim, T.A. (2015) Effect of sine-squared thermal boundary condition on augmentation of heat transfer in a triangular solar collector filled with different nanofluids. Numerical Heat Transfer Part B-Fundamentals, 68 (1). pp. 53-74. ISSN 1040-7790

Rahman, Mohammad Zahidur; Lee, Sai Peck (2000) Sealed-bid auction protocol implementation over CORBA architecture. Malaysian Journal of Computer Science, 14 (2). pp. 95-105.

Raja, J.E.; Loo, C.K.; Rao, M.V.C. (2007) The necessity of a non-linear & non-stationary data processing in engineering and the new Hilbert Huang Transform (HHT). Journal of College Science in India, 1 (3).

Rajendran, S.; Arof, H.; Mokhtar, N.; Mubin, M.; Yegappan, S.; Ibrahim, F. (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Rakhshandehroo, M.; Yusof, M.J.M.; Ale Ebrahim, N.; Sharghi, A.; Arabi, R. (2015) 100 most cited articles in urban green and open spaces: A bibliometric analysis. Current World Environment, 10 (2). pp. 445-455. ISSN 0973-4929

Rakib, M.I.; Choudhury, I.A.; Hussain, S.; Abu Osman, N.A (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069

Ramakrishnan, K.; Yasin, N.M. (2012) Employment issues among Malaysian information and communication technology (ICT) graduates: a case study. African Journal of Business Management, 6 (16). pp. 5615-5621. ISSN 1993-8233

Ramli, R.; Arof, H.; Ibrahim, F.; Idris, M.Y.I.; Khairuddin, A.S.M. (2015) Classification of eyelid position and eyeball movement using EEG signals. Malaysian Journal of Computer Science, 28 (1). pp. 28-45. ISSN 0127-9084

Ramli, R.; Arof, H.; Ibrahim, F.; Mokhtar, N.; Idris, M.Y.I. (2015) Using finite state machine and a hybrid of EEG signal and EOG artifacts for an asynchronous wheelchair navigation. Expert Systems with Applications, 42 (5). pp. 2451-2463. ISSN 0957-4174

Ranathunga, L.; Zainuddin, R.; Abdullah, N.A. (2010) Compacted dither pattern codes over MPEG-7 dominant colour descriptor in video visual depiction. Malaysian Journal of Computer Science, 23 (2). pp. 68-84. ISSN 0127-9084

Rashidi, H.R.; Sulaiman, N.M.N.; Hashim, N.A.; Hassan, C.R.C.; Ramli, M.R. (2015) Synthetic reactive dye wastewater treatment by using nano-membrane filtration. Desalination and Water Treatment, 55 (1). pp. 86-95. ISSN 1944-3994

Raval, R.R.; Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Work together… when apart challenges and what is need for effective virtual teams. Journal of Information, Knowledge and Research in Business Management and Administration, 1 (1). pp. 1-3. ISSN 0975 – 671X

Raymond, W.J.K.; Illias, H.A.; Abu Bakar, A.H.; Mokhlis, H. (2015) Partial discharge classifications: Review of recent progress. Measurement, 68. pp. 164-181. ISSN 0263-2241

Raza, S.; Mokhlis, H.; Arof, H.; Laghari, J.A.; Wang, L. (2015) Application of signal processing techniques for islanding detection of distributed generation in distribution network : A review. Energy Conversion and Management, 96. pp. 613-624. ISSN 0196-8904

Razali, R.; Abu Osman, N.A.; Shasmin, H.N.; Usman, J.; Wan Abas, W.A.B. (2006) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450216X

Refai, M.; Sharieh, A.; Alshammari, F. (2010) Leader election algorithm in 2D torus networks with the presence of one link failure. International Arab Journal of Information Technology, 7 (2). pp. 105-114.

Rifat, A.A.; Mahdiraji, G.A.; Chow, D.M.; Shee, Y.G.; Ahmed, R.; Adikan, F.R.M. (2015) Photonic crystal fiber-based surface plasmon resonance sensor with selective analyte channels and graphene-silver deposited core. Sensors, 15 (5). pp. 11499-11510. ISSN 1424-8220

Rosdin, R.Z.R.; Ali, N.M.; Arof, H.; Harun, S.W. (2015) A passively harmonically mode-locked soliton erbium-doped fiber laser with low pumping threshold using a single-walled carbon nanotubes. Microwave and Optical Technology Letters, 57 (4). pp. 799-803. ISSN 0895-2477

Roslah , J.; Zainab, A.N. (2007) Identifying what services need to be improved by measuring the library's performance. Malaysian Journal of Library & Information Science, 12 (1). pp. 35-53.

Roy, S.; Ramiah, H.; Reza, A.W. (2015) Designing a new high gain CMOS amplifier towards a 17.22 MHz MEMS based Si oscillator for a cost effective clock generator IC. Ieice Electronics Express, 12 (10). p. 8. ISSN 1349-2543

Rusly, S.M.; Ibrahim, S. (2010) Adsorption of textile reactive dye by palm shell activated carbon: response surface methodology. World Academy of Science, Engineering and Technology, 43. pp. 892-895. ISSN 2010376X (ISSN)

Ruthiraan, M.; Mubarak, N.M.; Thines, R.K.; Abdullah, E.C.; Sahu, J.N.; Jayakumar, N.S.; Ganesan, P. (2015) Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater. Korean Journal of Chemical Engineering, 32 (3). pp. 446-457. ISSN 0256-1115

Sabran, M.B.S.; Jusoh, Z.; Babar, I.M.; Ahmad, H.; Harun, S.W. (2015) Dual-wavelength passively Q-switched erbium ytterbium codoped fiber laser based on a nonlinear polarization rotation technique. Microwave and Optical Technology Letters, 57 (3). pp. 530-533. ISSN 0895-2477

Sabri, M.F.M.; Ono, T.; Said, S.M.; Kawai, Y.; Esashi, M. (2015) Fabrication and characterization of microstacked PZT actuator for MEMS applications. Journal of Microelectromechanical Systems, 24 (1). pp. 80-90. ISSN 1057-7157

Sadeghinezhad, E.; Togun, H.; Mehrali, M.; Nejad, P.S.; Latibari, S.T.; Abdulrazzaq, T.; Kazi, S.N.; Metselaar, H.S.C. (2015) An experimental and numerical investigation of heat transfer enhancement for graphene nanoplatelets nanofluids in turbulent flow conditions. International Journal of Heat and Mass Transfer, 81. pp. 41-51. ISSN 0017-9310

Safahieh, H.; Sanni, S.A.; Zainab, A.N. (2011) International Contribution to Nipah Virus Research 1999-2010. Malaysian Journal of Library & Information Science, 17 (3). pp. 35-47.

Safee, M.K.M.; Abas, W.A.B.W.; Ibrahim, F.; Abu Osman, N.A.; Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M.; Abas, W.A.B.W.; Ibrahim, F.; Osman, N.A.A.; Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Said, S.H.; Razak, H.A.; Othman, I. (2015) Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers. Construction and Building Materials, 75. pp. 176-188. ISSN 0950-0618

Said, Z.; Sabiha, M.A.; Saidur, R.; Hepbasli, A.; Rahim, N.A.; Mekhilef, S.; Ward, T.A. (2015) Performance enhancement of a flat plate solar collector using titanium dioxide nanofluid and polyethylene glycol dispersant. Journal of Cleaner Production, 92. pp. 343-353. ISSN 0959-6526

Said, Z.; Sajid, M.H.; Saidur, R.; Mahdiraji, G.A.; Rahim, N.A. (2015) Evaluating the optical properties of TiO2 nanofluid for a direct absorption solar collector. Numerical Heat Transfer Part a-Applications, 67 (9). pp. 1010-1027. ISSN 1040-7782

Saidin, N.; Harun, S.W.; Ahmad, H.; Ali, S.M.M.; Damanhuri, S.S.A.; Halder, A.; Paul, M.C.; Das, S.; Pal, M.; Bhadra, S.K. (2015) Enhancement of thulium-Ytterbium doped fiber laser efficiency using dual-pumping method. Microwave and Optical Technology Letters, 57 (2). pp. 285-287. ISSN 0895-2477

Sairi, N.A.; Abd Ghani, N.; Aroua, M.K.; Yusoff, R.; Alias, Y. (2015) Low pressure solubilities of CO2 in guanidinium trifluoromethanesulfonate-MDEA systems. Fluid Phase Equilibria, 385. pp. 79-91. ISSN 0378-3812

Sajjadi, B.; Abdul Aziz, A.R.; Baroutian, S.; Ibrahim, S. (2013) Investigation of convection and diffusion during biodiesel production in packed membrane reactor using 3D simulation. Journal of Industrial and Engineering Chemistry. pp. 1-12. ISSN 1226086X

Sajjadi, B.; Abdul Raman, A.A.; Baroutian, S.; Ibrahim, S.; Raja Ehsan Shah, R.S.S. (2014) 3D Simulation of fatty acid methyl ester production in a packed membrane reactor. Fuel Processing Technology, 118. pp. 7-19. ISSN 0378-3820

Sajjadi, B.; Aziz, A.R.A.; Ibrahim, S. (2015) Mechanistic analysis of cavitation assisted transesterification on biodiesel characteristics. Ultrasonics Sonochemistry, 22. pp. 463-473. ISSN 1350-4177

Sajjadi, B.; Raman, A.A.A.; Ibrahim, S. (2015) Influence of ultrasound power on acoustic streaming and micro-bubbles formations in a low frequency sono-reactor: Mathematical and 3D computational simulation. Ultrasonics Sonochemistry, 24. pp. 193-203. ISSN 1350-4177

Sajjadi, B.; Raman, A.A.A.; Ibrahim, S.; Shah, R.S.S.R.E. (2012) Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD. Reviews in Chemical Engineering, 28 (2-3). pp. 171-189. ISSN 0167-8299

Sajjadi, B.; Raman, A.A.A.; Shah, R.S.S.R.E.; Ibrahim, S. (2013) Review on Applicable breakup/coalescence models in turbulent liquid-liquid flows. Reviews in Chemical Engineering, 29 (3). pp. 131-158. ISSN 0167-8299

Salaheldeen, M.; Aroua, M.K.; Mariod, A.A.; Cheng, S.F.; Abdelrahman, M.A.; Atabani, A.E. (2015) Physicochemical characterization and thermal behavior of biodiesel and biodiesel diesel blends derived from crude Moringa peregrina seed oil. Energy Conversion and Management, 92. pp. 535-542. ISSN 0196-8904

Salbiah, S.; Somaya, A.; Arof, H.; Saleh, Z.S.; Ibrahim, F. (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457

Salim, S.S.; Raja Zainal Abidin, R.N.A.Z. (2006) Eliciting specification for a web-based distance-learning system from lecturers and students in Malaysia. Asian Journal of Distance Education, 4 (1). pp. 56-66. ISSN 1347-9008

Samsudin, S.; Adwan, S.; Arof, H.; Mokhtar, N.; Ibrahim, F. (2012) Development of automated image stitching system for radiographic images. Journal of Digital Imaging, 26 (2). pp. 361-70. ISSN 0897-1889

Sanjid, A.; Masjuki, H.H.; Kalam, M.A.; Rahman, S.M.A.; Abedin, M.J.; Fattah, I.M.R. (2015) Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends. Rsc Advances, 5 (17). pp. 13246-13255. ISSN 2046-2069

Sanni, S.A.; Zainab, A.N. (2011) Evaluating the influence of a medical journal using Google Scholar. Learned Publishing, 24 (2). pp. 145-154. ISSN 0953-1513

Sanni, S.A.; Zainab, A.N. (2011) Measuring the influence of a journal using impact and diffusion factors. Malaysian Journal of Library & Information Science, 16 (2). pp. 127-140. ISSN 1394-6234

Sarhan, A.A.D.; Matsubara, A. (2015) Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling. Robotics and Computer-Integrated Manufacturing, 34. pp. 133-139. ISSN 0736-5845

Sattari, M.R.J.; Noor, R.M.; Keshavarz, H. (2012) A taxonomy for congestion control algorithms in vehicular ad hoc networks. arXiv preprint arXiv:1207.3943. ISSN 1207.3943

Sayeed, S.; Andrews, S.; Besar, R.; Kiong, L.C. (2008) Forgery detection in dynamic signature verification by entailing principal component analysis. Discrete Dynamics in Nature and Society, 2007. ISSN 1026-0226

Seeme, F.B.; Arafat, A.O.; Dimyati, K. (2010) QoS improvement for multimedia traffic in WLANs with TTN approach. International Journal of the Physical Sciences, 5 (6). pp. 847-851.

Seera, M.; Lim, C.P.; Liew, W.S.; Lim, E.; Loo, C.K. (2015) Classification of electrocardiogram and auscultatory blood pressure signals using machine learning models. Expert Systems with Applications, 42 (7). pp. 3643-3652. ISSN 0957-4174

Seiffert, J.; Hussain, F.; Wiegman, C.; Li, F.; Bey, L.; Baker, W.; Porter, A.; Ryan, M.P.; Chang, Y.; Gow, A.; Zhang, J.F.; Zhu, J.; Tetley, T.D.; Chung, K.F. (2015) Pulmonary toxicity of instilled silver nanoparticles: Influence of size, coating and rat strain. PLoS One, 10 (3). p. 17. ISSN 1932-6203

Sen, B.K. (1996) An enquiry into the information retrieval efficiency of LISA plus database. Malaysian Journal of Library & Information Science, 1 (1). pp. 67-84.

Sen Gupta, I.; Ibrahim, S.; Ramachandran, K.B. (2001) Production of 2,3-butanediol from blackstrap molasses. Chemie-Ingenieur-Technik, 73 (6). p. 654. ISSN 0009286X

Senanayake, S.M.N.; Kiong, L.C.; Gouwanda, D. (2011) Real-time stability measurement system for postural control. Journal of Bodywork and Movement Therapies, 15 (4). pp. 453-464. ISSN 1360-8592

Seng, W.C.; Chitsaz, M. (2010) Handgrip strength evaluation using neuro fuzzy approach. Malaysian Journal of Computer Science, 23 (3). p. 166. ISSN 0127-9084

Seng, W.C.; Chitsaz, M. (2013) Medical image segmentation using a multi-agent system. International Arab Journal of Information Technology, 10 (33).

Seng, W.C.; Fong, L.L.; Shing, N.L.; Noudeh, S.A.H. (2011) Robust watermarking using hand gesture for enhanced authentication. Malaysian Journal of Computer Science, 24 (2). p. 98. ISSN 0127-9084

Seng, W.C.; Mirisaee, S.H. (2011) A simple approach for education using virtual human dataset. International Arab Journal of e-Technology, 2 (1). pp. 29-35. ISSN 1997-6364

Shafie, S.M.; Mahlia, T.M.I.; Masjuki, H.H.; Andriyana, A. (2011) Current energy usage and sustainable energy in Malaysia: A review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4370-4377.

Shahi, S.; Harun, S.W.; Norizan, S.F.; Moghaddam, M.R.A.; Ahmad, H. (2010) Brillouin-raman multi-wavelength laser comb generation based on BI-EDF by using dual-wavelength in dispersion compensating fiber. Journal of Nonlinear Optical Physics & Materials, 19 (1). pp. 123-130.

Shahmohamadi, P.; Che-Ani, A.I.; Ramly, A.; Maulud, K.N.A.; Mohd-Nor, M.F.I. (2010) Reducing urban heat island effects: A systematic review to achieve energy consumption balance. International Journal of the Physical Sciences, 5 (6). pp. 626-636.

Shaikha, Z. (1982) Program lawatan sambil belajar di University of Washington, Amerika Syarikat. KEKAL ABADI - Berita Perpustakaan Universiti Malaya, 1 (1). pp. 1-6.

Shakib, M.N.; Moghavvemi, M.; Mahadi, W.N.L. (2015) Design of a compact planar antenna for ultra-wideband operation. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 222-229. ISSN 1054-4887

Shamiri, A.; Wong, S.W.; Zanil, M.F.; Hussain, M.A.; Mostoufi, N. (2015) Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors. Chemical Engineering Journal, 264. pp. 706-719. ISSN 1385-8947

Shamshirband, S.; Kalantari, S.; Daliri, Z.S.; Ng, L.S. (2010) Expert security system in wireless sensor networks based on fuzzy discussion multi-agent systems. Scientific Research and Essays, 5 (24). pp. 3840-3849. ISSN 1992-2248

Shamshirband, S.; Petkovic, D.; Javidnia, H.; Gani, A. (2015) Sensor data fusion by support vector regression methodology-A comparative study. IEEE Sensors Journal, 15 (2). pp. 850-854.

Sharifah Noor Nazim, S.Y.; Ati Rosemary, M.A.; Muhammad Azzam, I. (2014) Green potential rating tool: An assessment of green potential for conventional buildings. Journal of Buildings Performance., 5 (1). pp. 1-12.

Sharma, R.K.; Ganesan, P.; Tyagi, V.V.; Metselaar, H.S.C.; Sandaran, S.C. (2015) Developments in organic solid-liquid phase change materials and their applications in thermal energy storage. Energy Conversion and Management, 95. pp. 193-228. ISSN 0196-8904

Sharouny, H.; Omar, R. (2014) Iatrogenic aspiration of custom-made keel: A case report. Iranian Red Crescent Medical Journal, 16 (12).

Shasmin, H.N.; Abu Osman, N.A.; Razali, R.; Usman, J.; Abas, W.A.B.W. (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194

Shirazi, F.S.; Mehrali, M.; Oshkour, A.A.; Metselaar, H.S.C.; Kadri, N.A.; Abu Osman, N.A. (2015) Characterization and mechanical properties of calcium silicate/citric acid-based polymer composite materials. International Journal of Applied Ceramic Technology, 12 (2). pp. 371-376. ISSN 1546-542X

Shirazi, M.R.; Harun, S.W.; Ahmad, H. (2015) Effective use of an EDFA and Raman pump residual powers via a Bi-EDF in L-band multi-wavelength fiber laser generation. Laser Physics, 25 (1). ISSN 1054-660X

Shnawah, D.A.; Sabri, M.F.M.; Badruddin, I.A.; Said, S.M.; Bashir, M.B.A.; Sharif, N.M.; Elsheikh, M.H. (2015) Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys. Journal of Alloys and Compounds, 622. pp. 184-188. ISSN 0925-8388

Shokripour, R.; Anvik, J.; Kasirun, Z.M.; Zamani, S. (2014) Improving automatic bug assignment using time-metadata in term-weighting. IETsoftware, 8 (6). pp. 269-278.

Silitonga, A.S.; Atabani, A.E.; Mahlia, T.M.I.; Sebayang, A.H. (2011) Techno-economic analysis and environmental impact of fuel economy labels for passenger cars in Indonesia. Renewable & Sustainable Energy Reviews, 15 (9). pp. 5212-5217.

Sim, L.C.; Ng, K.W.; Ibrahim, S.; Saravanan, P. (2013) Preparation of improved p-n junction NiO/TiO2 nanotubes for solar-energy-driven light photocatalysis. International Journal of Photoenergy, 2013. ISSN 1110-662X

Solaymani, S.; Kardooni, R.; Yusoff, S.; Kari, F. (2015) The impacts of climate change policies on the transportation sector. Energy, 81. pp. 719-728. ISSN 0360-5442

Sorayya, M.; Baba, M.S. (2012) Supervised and unsupervised artificial neural networks for analysis of diatom abundance in tropical Putrajaya Lake, Malaysia. Sains Malaysiana, 41 (8). pp. 939-947. ISSN 0126-6039

Sulaiman, A.; Soo, M.J.; Yoon, M.M.L.; Farid, M.; Silva, F.V.M. (2015) Modeling the polyphenoloxidase inactivation kinetics in pear, apple and strawberry purees after high pressure processing. Journal of Food Engineering, 147. pp. 89-94. ISSN 0260-8774

Sulaiman, S.S.; Annuar, M.S.M.; Abdul Razak, N.N.; Ibrahim, S.; Bakar, B. (2013) Triarylmethane dye decolorization by pellets of pycnoporus sanguineus: statistical optimization and effects of novel impeller geometry. Bioremediation Journal, 17 (4). pp. 305-315. ISSN shaliza@um.edu.my

Sun, Z.T.; Gani, A.; Sun, X.Y.; Liu, N. (2011) Improving QoS Of WiMAX By ondemand bandwidth allocation based on PMP mode. Journal of Computers, 6 (10). pp. 2187-2195. ISSN 1796-203X

Sunil, W.; Zainab, A.N. (2002) An exploratory study of collection development of selected school resource centres in Sri Lanka. Malayswn Journal of Library & Information Science, 7 (1). pp. 31-42.

Swee, T.L.; Abrizah, A. (2005) The status of school library automation in Malaysian Chinese secondary schools: A national survey. Malaysian Journal of Library & Information Science, 10 (1). pp. 29-48.

Syaima, M.T.S.; Ong, K.H.; Noor, I.M.; Zamratul, M.I.M.; Brahim, S.A.; Hafizul, M.M. (2015) The synthesis of bio-lubricant based oil by hydrolysis and non-catalytic of palm oil mill effluent (POME) using lipase. Renewable and Sustainable Energy Reviews, 44. pp. 669-675. ISSN 1364-0321

Tahir, A.; Ahmad, R.; Kasirun, Z.M. (2010) Maintainability dynamic metrics data collection based on aspect-oriented technology. Malaysian Journal of Computer Science, 23 (3). pp. 177-194. ISSN 0127-9084

Tahriri, F.; Dabbagh, M.; Ale Ebrahim, N. (2014) Supplier assessment and selection using fuzzy analytic hierarchy process in a steel manufacturing company. Journal of Scientific Research and Reports, 3 (10). pp. 1319-1338. ISSN 2320–0227

Tahriri, F.; Mousavi, M.; Yap, H.J.; Zawiah, M.D.S.; Taha, Z. (2015) Optimizing the robot arm movement time using virtual reality robotic teaching system. International Journal of Simulation Modelling, 14 (1). pp. 28-38. ISSN 1726-4529

Tam, S.S.; Kan, N.H.; Ng, L.L. (2010) Low proficiency learners in synchronous computer-assisted and face-to-face interactions. Turkish Online Journal of Educational Technology, 9 (3). pp. 61-75.

Tamrin, K.F.; Nukman, Y.; Choudhury, I.A.; Shirley, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166

Tan, C.Y.; Ramesh, S.; Teh, Y.C.; Tan, Y.M.; Yap, B.K. (2015) The effects of calcium-to-phosphorus ratio on the densification and mechanical properties of hydroxyapatite ceramic. International Journal of Applied Ceramic Technology, 12 (1). pp. 223-227. ISSN 1546-542X

Tan, K.H.; Johan, M.R.; Ahmad, R.; Kadri, N.A.; Zain, N.M.; Arof, A.K. (2012) Mechanical analysis of the effects of different mechanical alloying periods on Ni3Al intermetallic compound fabrication quality. International Journal of Electrochemical Science, 7 (4). pp. 3765-3772. ISSN 1452-3981

Tan, K.S.; Wong, Y.H.; Cheong, K.Y. (2015) Thermal characteristic of sintered Ag-Cu nanopaste for high-temperature die-attach application. International Journal of Thermal Sciences, 87. pp. 169-177. ISSN 1290-0729

Tan, W.R.; Chan, C.S.; Yogarajah, P.; Condell, J. (2012) A fusion approach for efficient human skin detection. IEEE Transactions on Industrial Informatics, 8 (1). pp. 138-147. ISSN 1551-3203

Tang, A.; Zain, S.; Abdullah, R. (2010) Development and evaluation of a chemistry educational software for learning organic reactions using qualitative reasoning. International Journal of Education and Information Technologies, 4 (3). pp. 129-138.

Tang, A.Y.C.; Abdullah, R.; Zain, S.M.; Rahman, N.A. (2009) Generating qualitative causal graph using modeling constructs of qualitative process theory for explaining organic chemistry reactions. International Journal of Information Technology, 5 (1). pp. 1-11.

Tang, A.Y.C.; Abdullah, R.H.; Zain, S.M. (2011) Development of a simulator for explaining organic chemical reactions based on qualitative process theory. World Academy of Science, Engineering and Technology, 57. pp. 22-27.

Tang, A.Y.C.; Zain, S.M.; Rahman, N.A.; Abdullah, R. (2009) Deriving causal explanation from qualitative model reasoning. Proceedings of the World Academy of Science, Engineering And Technology, 59. pp. 29-36.

Taur, A.; Doshi, P.; Yeoh, H.K. (2015) Dripping dynamics of Newtonian liquids from a tilted nozzle. European Journal of Mechanics B-Fluids, 51. pp. 8-15. ISSN 0997-7546

Tay, N.W.; Loo, C.K.; Perus, M. (2010) Application of gabor wavelet in Quantum Holography for image recognition. International Journal of Nanotechnology and Molecular Computation (IJNMC), 2 (1). pp. 44-61.

Tay, N.W.; Loo, C.K.; Perus, M. (2010) Face recognition with quantum associative networks using overcomplete gabor wavelet. Cognitive Computation, 2 (4). pp. 297-302. ISSN 1866-9956

Tay, S.L.; Chen, Wei-wei; Wei, Xiao-jin; Yao, Cai-zhen; Gao, W. (2015) Properties of Zn-Bi composite coatings prepared by ionic co-discharge deposition. Transactions of Nonferrous Metals Society of China, 25 (1). pp. 199-205. ISSN 1003-6326

Tay, S.L.; Haseeb, A.S.M.A.; Johan, M.R. (2011) Addition of cobalt nanoparticles into Sn-3.8Ag-0.7Cu lead-free solder by paste mixing. Soldering & Surface Mount Technology, 23 (1). pp. 10-14. ISSN 0954-0911

Teh, K.H.; Wong, S.F. (1996) Developing a CDS ISIS-based online cataloguing and information retrieval interfaces for use in small libraries. Malaysian Journal of Library & Information Science,, 1 (1). pp. 1-20.

TermehYousefi, A.; Bagheri, S.; Adib, N. (2015) Integration of biosensors based on microfluidic: A review. Sensor Review, 35 (2). pp. 190-199. ISSN 0260-2288

TermehYousefi, A.; Bagheri, S.; Kadri, N.A.; Mahmood, M.R.; Ikeda, S. (2015) Constant glucose biosensor based on vertically aligned carbon nanotube composites. International Journal of Electrochemical Science, 10 (5). pp. 4183-4192. ISSN 1452-3981

Termehyousefi, A.; Bagheri, S.; Kadri, N.A.; Elfghi, F.M.; Rusop, M.; Ikeda, S. (2015) Synthesis of well-crystalline lattice carbon nanotubes via neutralized cooling method. Materials and Manufacturing Processes, 30 (1). pp. 59-62. ISSN 1042-6914

Tham, L.K.; Abu Osman, N.A.; Lim, K.S.; Pingguan-Murphy, B.; Abas, W.A.B.W.; Zain, N.M. (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533

Tham, L.K.; Abu Osman, N.A.; Wan Abas, W.A.B.; Lim, K.S. (2013) The validity and reliability of motion analysis in patellar tendon reflex assessment. PLoS One, 8 (2). e55702. ISSN 1932-6203

Thangalazhy-Gopakumar, S.; Al-Nadheri, W.M.A.; Jegarajan, D.; Sahu, J.N.; Mubarak, N.M.; Nizamuddin, S. (2015) Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production. Bioresource Technology, 178. pp. 65-69. ISSN 0960-8524

Tharsika, T.; Haseeb, A.S.M.A.; Akbar, S.A.; Sabri, M.F.M.; Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon, assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388

Tharsika, T.; Haseeb, A.S.M.A.; Akbar, S.A.; Thanihaichelvan, M. (2015) Tailoring ZnO nanostructures by spray pyrolysis and thermal annealing. Ceramics International, 41 (3). pp. 5205-5211. ISSN 0272-8842

Thio, T.H.G.; Ibrahim, F.; Al-Faqheri, W.; Moebius, J.; Khalid, N.S.; Soin, N.; Kahar, M.K.B.A.; Madou, M. (2013) Push pull microfluidics on a multi-level 3D CD. Lab on a Chip - Miniaturisation for Chemistry and Biology, 13 (16). pp. 3199-3209. ISSN 1473-0189

Thio, T.H.G.; Soroori, S.; Ibrahim, F.; Al-Faqheri, W.; Soin, N.; Kulinsky, L.; Madou, M. (2013) Theoretical development and critical analysis of burst frequency equations for passive valves on centrifugal microfluidic platforms. Medical and Biological Engineering and Computing, 51 (5). pp. 525-535. ISSN 0140-0118

Ting, T.O.; Rao, M.V.C.; Loo, C.K. (2006) A novel approach for unit commitment problem via an effective hybrid particle swarm optimization. IEEE Transactions on Power Systems, 21 (1). pp. 411-418. ISSN 0885-8950

Ting, T.O.; Rao, M.V.C.; Loo, C.K.; Ngu, S.S. (2003) Solving unit commitment problem using hybrid particle swarm optimization. Journal of Heuristics, 9 (6). pp. 507-520. ISSN 1381-1231

Tripathi, M.; Sahu, J.N.; Ganesan, P.; Monash, P.; Dey, T.K. (2015) Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Journal of Analytical and Applied Pyrolysis, 112. pp. 306-312. ISSN 0165-2370

Uddin, M.; Mekhilef, S.; Rivera, M. (2015) Experimental validation of minimum cost function-based model predictive converter control with efficient reference tracking. Iet Power Electronics, 8 (2). pp. 278-287. ISSN 1755-4535

Uddin, M.N.; Daud, W.M.A.W.; Abbas, H.F. (2015) Co-production of hydrogen and carbon nanofibers from methane decomposition over zeolite Y supported Ni catalysts. Energy Conversion and Management, 90. pp. 218-229. ISSN 0196-8904

Uddin, Muslem; Mekhilef, Saad; Rivera, Marco; Rodriguez, Jose (2015) Imposed weighting factor optimization method for torque ripple reduction of IM fed by indirect matrix converter with predictive control algorithm. Journal of Electrical Engineering & Technology, 10 (1). pp. 227-242. ISSN 1975-0102

Ullah, K.R.; Akikur, R.K.; Ping, H.W.; Saidur, R.; Hajimolana, S.A.; Hussain, M.A. (2015) An experimental investigation on a single tubular SOFC for renewable energy based cogeneration system. Energy Conversion and Management, 94. pp. 139-149. ISSN 0196-8904

Ullah, M.H.; Ahsan, M.R.; Mahadi, W.N.L.W.; Latef, T.A.; Uddin, M.J. (2015) Isolation improvement of dual feed patch antenna by assimilating metasurface ground. Microwave and Optical Technology Letters, 57 (6). pp. 1406-1409. ISSN 0895-2477

Usman, M.; Daud, W.; Abbas, H.F. (2015) Dry reforming of methane: Influence of process parameters-A review. Renewable & Sustainable Energy Reviews, 45. pp. 710-744. ISSN 710-744

Usop, Z.; Sarhan, A.A.D.; Mardi, N.A.; Wahab, M.N.A. (2015) Measuring of positioning, circularity and static errors of a CNC vertical machining centre for validating the machining accuracy. Flow Measurement and Instrumentation, 61. pp. 39-50. ISSN 0263-2241

Varman, M.; Miyafuji, H.; Saka, S. (2010) Fractionation and characterization of oil palm (Elaeis guineensis) as treated by supercritical water. Journal of Wood Science, 56 (6). pp. 484-494.

Varman, M.; Saka, S. (2011) A comparative study of oil palm and Japanese beech on their fractionation and characterization as treated by supercritical water. Waste and Biomass Valorization, 2 (3). pp. 309-315. ISSN 1877-2641

Vijayaletchumy, M. (2012) Before and after knowledge management initiatives: After action review. Jurnal Persatuan Pustakawan Malaysia, 6. pp. 1-8.

Wakil, M.A.; Kalam, M.A.; Masjuki, H.H.; Atabani, A.E.; Fattah, I.M.R. (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94. pp. 51-67. ISSN 0196-8904

Wang, H.C.; He, Y.T.; Sun, H.Y.; Qiu, Z.R.; Xie, D.; Mei, T.; Tin, C.C.; Feng, Z.C. (2015) Temperature dependence of raman scattering in 4H-SiC films under different growth conditions. Chinese Physics Letters, 32 (4). p. 5. ISSN 0256-307X

Wazed, M.A.; Ahmed, S.; Nukman, Y. (2010) Impacts of quality and processing time uncertainties in multistage production system. International Journal of The Physical Sciences, 5 (6). pp. 814-825.

Wazed, M.A.; Ahmed, S.; Nukman, Y. (2010) A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions. South African Journal of Industrial Engineering, 21 (1). pp. 17-33.

Wee, L.L.; Annuar, M.S.B.M.; Ibrahim, S. (2011) Short communication: energetics of glucoamylase-catalyzed hydrolysis of commercial sago starch. Asia-Pacific Journal of Molecular Biology and Biotechnology, 19 (4). pp. 117-120. ISSN 01287451

Wee, L.L.; Annuar, M.S.M.; Ibrahim, S.; Chisti, Y. (2011) Enzyme-mediated production of sugars from sago starch: statistical process optimization. Chemical Engineering Communications, 198 (11). pp. 1339-1353. ISSN 0098-6445

Wee, W.H.; Azhar Abdul Razak, M.; Kadri, N.A. (2012) Dielectrophoretic K562 cell entrapment device using benchtop microfluidics fabrication. Advanced Science Letters, 15 (1). pp. 1-4. ISSN 19366612 (ISSN)

Wee, W.H.; Razak, M.A.A.; Kadri, N.A. (2012) Electrochemical cell entrapment device for BioMEMS applications using benchtop fabrication techniques. International Journal of Electrochemical Science, 7. pp. 11588-11595.

Wong, W.K.; Choo, C.W.; Loo, C.K.; Teh, J.P. (2010) FPGA implementation of log-polar mapping. International Journal of Computer Applications in Technology, 39 (1). pp. 12-18. ISSN 1741-5047

Wong, W.K.; Loo, C.K.; Lim, W.S. (2010) Optical approach based omnidirectional thermal visualization. International Journal of Image Processing (IJIP), 4 (3). p. 263. ISSN 1985-2304

Wong, W.K.; Loo, C.K.; Lim, W.S.; Tan, P.N. (2010) Thermal condition monitoring system using log-polar mapping, quaternion correlation and max-product fuzzy neural network classification. Neurocomputing, 74 (1-3). pp. 164-177. ISSN 0925-2312

Wong, W.K.; Tan, P.N.; Loo, C.K.; Lim, W.S. (2010) Omnidirectional surveillance system using thermal camera. Journal of Computer Science and Engineering, 3 (2). pp. 42-51.

Woo, C.S.; Jiang, D.; Binh, P. (2009) Semi fragile watermark with self authentication and self recovery. Malaysian Journal of Computer Science, 22 (1). pp. 64-84. ISSN 0127-9084

Xu, X.Y.; Akay, A.; Wei, H.L.; Wang, S.Q.; Pingguan-Murphy, B.; Erlandsson, B.E.; Li, X.J.; Lee, W.; Hu, J.; Wang, L.; Xu, F. (2015) Advances in smartphone-based point-of-care diagnostics. Proceedings of the Ieee, 103 (2). pp. 236-247. ISSN 0018-9219

Yafouz, B.; Kadri, N.A.; Ibrahim, F. (2012) The design and simulation of a planar microarray dot electrode for a dielectrophoretic lab-on-chip device. International Journal of Electrochemical Science, 7 (12). pp. 12054-12063. ISSN 1452-3981

Yahya, A.M.; Hussain, M.A.; Wahab, A.K.A. (2015) Modeling, optimization, and control of microbial electrolysis cells in a fed-batch reactor for production of renewable biohydrogen gas. International Journal of Energy Research, 39 (4). pp. 557-572. ISSN 0363-907X

Yau, Y.H.; Hasbi, S. (2015) Field analysis of indoor air quality in high rise and low rise green offices with radiant slab cooling systems in Malaysia. Indoor and Built Environment, 24 (2). pp. 174-184. ISSN 1420-326X

Yau, Y.H.; Pean, H.L. (2011) The climate change impact on air conditioner system and reliability in Malaysia-A review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4939-4949.

Yee, P.L.; Kiah, M.L.M. (2010) Shoulder surfing resistance using penup event and neighbouring connectivity manipulation. Malaysian Journal of Computer Science, 23 (2). pp. 121-140. ISSN 0127-9084

Yeoh, K.H.; Kaur, K. (2008) Subject support in collection development: using the bibliometric tool. Collection Building, 27 (4). pp. 157-166. ISSN 0160-4953

Yew, M.C.; Sulong, N.H.R.; Yew, M.K.; Amalina, M.A.; Johan, M.R. (2015) Eggshells: A novel bio-filler for intumescent flame-retardant coatings. Progress in Organic Coatings, 81. pp. 116-124. ISSN 0300-9440

Yew, M.C.; Sulong, N.H.R.; Yew, M.K.; Amalina, M.A.; Johan, M.R. (2015) Influences of flame-retardant fillers on fire protection and mechanical properties of intumescent coatings. Progress in Organic Coatings, 78. pp. 59-66. ISSN 0300-9440

Yousoof, M.; Sapiyan, M.; Kamaluddin, K. (2006) A Proposed Framework for Visualization to Teach Computer Science. PROCEEDINGS OF WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY, 12. pp. 266-269. ISSN 1307-6884

Yunus Khan, T.M.; Atabani, A.E.; Badruddin, I.A.; Ankalgi, R.F.; Khan, T.K.M.; Badarudin, A. (2015) Ceiba pentandra, Nigella sativa and their blend as prospective feedstocks for biodiesel. Industrial Crops and Products, 65. pp. 367-373. ISSN 0926-6690

Yunus Khan, T.M.; Badruddin, I.A.; Badarudin, A.; Banapurmath, N.R.; Salman Ahmed, N.J.; Quadir, G.A.; Al-Rashed, A.A.A.A.; Khaleed, H.M.T.; Kamangar, S. (2015) Effects of engine variables and heat transfer on the performance of biodiesel fueled IC engines. Renewable and Sustainable Energy Reviews, 44. pp. 682-691. ISSN 1364-0321

Yuso, R.J.R.; Zainuddin, R.; Baba, M.S.; Jomhari, N.; Yusoff, Z.M. (2012) Visualizing Quranic Words With Parallel Plot. Malaysian Journal of Computer Science, 25 (2). pp. 90-106. ISSN 0127-9084

Yusof, R.J.R.; Zainuddin, R.; Baba, M.S.; Yusoff, Z.M. (2010) Qur'anic words stemming. Arabian Journal for Science and Engineering, 35 (2 C). pp. 37-49.

Yusof, R.J.R.; Zainuddin, R.; Baba, M.S.; Yusoff, Z.M. (2009) T-Test for visualizing frequently used Arabic words. Journal of Applied Sciences, 9 (5). pp. 988-992. ISSN 1812-5654

Yusof, R.J.R.; Zainuddin, R.; Baba, M.S.; Yusoff, Z.M. (2009) Visualization systems supporting the reading of arabic document for non arabic speakers. Information Technology Journal, 8 (1). pp. 16-27. ISSN 1812-5638

Yusoff, N.M.; Salim, S.S. (2012) Investigating cognitive task difficulties and expert skills in e-Learning storyboards using a cognitive task analysis technique. Computers & Education, 58 (1). pp. 652-665. ISSN 0360-1315

Yusop, F.D. (2013) Curriculum and design analysis of a mathematics-based educational television program: a case study of Cyberchase animated television series. Malaysian Online Journal of Educational Technology, 2 (1).

Yusop, F.D. (2013) The benefits and challenges of implementing service-learning in an advanced instructional design and technology curricula: implications for teaching professional courses. The New Educational Review.

Yusop, F.D.; Baharin, Y. (2011) Pembelajaran kolaboratif menggunakan blog dalam pembelajaran mata pelajaran ekonomi asas. Jurnal Pendidikan, 31. (Unpublished)

Yusop, F.D.; Chin, Y.L. (2011) Potential use of social networking tool to assist reading comprehension: implications for practice and future research. Jurnal Pendidikan, 31 (1).

Yusop, F.D.; Correia, A-P. (2013) On becoming a civic-minded instructional designer: an ethnographic study of an instructional design experience. British Journal Of Educational Technology.

Yusuf, K.; Nukman, Y.; Yusof, T.M.; Dawal, S.Z.; Yang, H.Q.; Mahlia, T.M.I.; Tamrin, K.F. (2010) Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays, 5 (11). pp. 1284-1293.

Za'balawi, I.I.; Kiong, L.C.; Kiong, W.E.; Senanayake, S.M.N.A. (2009) Global entrainment effect on biped robot locomotion energy. International Journal of Robotics and Automation, 24 (6). ISSN 0826-8185

Zaharinie, T.; Huda, Z.; Izuan, M.F.; Hamdi, M. (2015) Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper. Applied Surface Science, 331. pp. 127-131. ISSN 0169-4332

Zahidah, Z.; Noorhidawati, A.; Zainab, A.N. (2011) Exploring the needs of Malay manuscript studies community for an e-learning platform. Malaysian Journal of Library & Information Science, 16 (3). pp. 31-47. ISSN 1394-6234

Zaidan, A.A.; Zaidan, B.B.; Alanazi, O.H.; Gani, A.; Zakaria, O.; Alam, G.M. (2010) Novel approach for high (secure and rate) data hidden within triplex space for executable file. Scientific Research and Essays, 5 (15). pp. 1965-1977. ISSN 1992-2248

Zaidan, B.B.; Zaidan, A.A.; Mat Kiah, M.L. (2011) Impact of data privacy and confidentiality on developing telemedicine applications: a review participates opinion and expert concerns. International Journal of Pharmacology, 7 (3). pp. 382-387. ISSN 1811-7775

Zaidan, B.B.; Zaidan, A.A.; Taqa, A.; Alam, G.M.; Kiah, M.L.M.; Jalab, A.H. (2010) StegoMos: a secure novel approach of high rate data hidden using mosaic image and ANN-BMP cryptosystem. International Journal of Physical Sciences, 5 (11). pp. 1796-1806. ISSN 1992-1950

Zainab, A.N. (2000) Publication productivity, focus on institutional, collaborative and communicational correlates: A review of literature. Malaysian Journal of Library & Information Science, 5 (1). pp. 53-94.

Zainab, A.N.; Abrizah, A.; Edzan, N.N. (2002) An information and communication technology (ICT) enabled knowledge-based Malay society. Malaysian Journal of Library & Information Science, Vol. 7, no.I, July 2002: I-IS, 7 (1). pp. 1-15.

Zainab, A.N.; Nor Eliza, M.Z. (1996) Introducing MAKLUM - the general reference expert adviser developed for a university library. Malaysian Journal of Library & Information Science, 1 (1). pp. 93-107.

Zainal Abidin, M.I.I.; Abdul Raman, A.A.; Mohamad Nor, M.I. (2013) Review on measurement techniques for drop size distribution in a stirred vessel. Industrial & Engineering Chemistry Research. pp. 16085-16094.

Zaqout, I.; Zainuddin, R.; Baba, S. (2005) Pixel-based skin color detection technique. Machine Graphics and Vision, 14 (1). p. 61. ISSN 1230-0535

Zaqout, I.; Zainuddin, R.; Baba, S. (2004) A feature-based approach for segmenting faces. Machine Graphics & Vision International Journal, 13 (3). pp. 249-259.

Zaqout, I.; Zainuddin, R.; Sapian, B. (2004) Human Face Detection In Color Images. Advances in Complex Systems, 7 (3). pp. 369-383.

Zarei, A.; Tiu, Z.C.; Ahmad, F.; Ahmad, H.; Harun, S.W. (2015) Q-switched brillouin fibre laser with multi-wall carbon nanotube saturable absorber. Iet Optoelectronics, 9 (2). pp. 96-100. ISSN 1751-8768

Zarinah, M.K.; Siti, S.S.; Perumal, R.M.; Hossain, M.D.; Masud, M.M.; Krishna, L.S.R.; Janardhan, G.R.; Rao, C.S.P.; Sivanandam, S.N.; Pandian, A.P. (2009) A Web-based requirements elicitation tool using focus group discussion in supporting computer-supported collaborative learning requirements development. International Journal of the Computer, the Internet and Management, 41. pp. 1-8.

Zarinah, M.K.; Siti, S.S.; Perumal, R.M.; Hossain, M.D.; Masud, M.M.; Krishna, L.S.R.; Janardhan, G.R.; Rao, C.S.P.; Sivanandam, S.N.; Pandian, A.P. (2009) A web-based requirements elicitation tool using focus group discussion in supporting computer-supported collaborative learning requirements development. International Journal of the Computer, 17 (2).

Zavareh, M.A.; Sarhan, A.A.D.; Bushroa, A.R.; Basirun, W.J. (2015) The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel. Ceramics International, 41 (4). pp. 5387-5396. ISSN 0272-8842

Zeimaran, E.; Pourshahrestani, S.; Pingguan-Murphy, B.; Kadri, N.A.; Rothan, H.A.; Yusof, R.; Towler, M.R.; Djordjevic, I. (2015) Fabrication and characterization of poly(octanediol citrate)/gallium-containing bioglass microcomposite scaffolds. Journal of Materials Science, 50 (5). pp. 2189-2201. ISSN 0022-2461

Zhong, X.; Mohammadi, A.; Premkumar, A.B.; Asif, A. (2015) A distributed particle filtering approach for multiple acoustic source tracking using an acoustic vector sensor network. Signal Processing, 108. pp. 589-603. ISSN 0165-1684

Zhou, J.; Abdullah, N.A.; Shi, Z. (2011) A hybrid P2P approach to service discovery in the cloud. International Journal of information Technology and Computer Science, 3 (1). pp. 1-9. ISSN 2074-9015

Zubir, M.N.M.; Badarudin, A.; Kazi, S.N.; Misran, M.; Amiri, A.; Sadri, R.; Khalid, S. (2015) Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science, 454. pp. 245-255. ISSN 0021-9797

Zyed, Z.A.S.; Abd Aziz, W.N.A. W.; Hanif, N.R.; Tedong, P.A. (2014) Affordable housing schemes: Overcoming homeownership problems. Open House International, 39 (4). pp. 5-13.

Book Section

Syed Yahya, S.N.N.; Ariffin, A.R.M.; Ismail, M.A. (2015) Building energy index and student’s perceived performance in public university buildings. In: Renewable Energy in the Service of Mankind. Springer International Publishing., Switzerland, pp. 1-7.

Conference or Workshop Item

A. Aziz, U. (1983) Harmony between rigorous empiricism and creative insight leads to excellence in research for development. In: International Symposium on Technology, Culture and Development, 12-14 Dec 1983, University of Malaya.

Abadullah, N.; Ghazal, G. (2014) Technology and literacy in a synergy: Understanding children techno-literacy for e-book design. In: Fourth Asian Literature and Librarianship, 03-06 Apr 2014, Osaka, Japan. (Submitted)

Abd Rahman, H.S.; Abu Osman, N.A.; Wan Abas, W.A.B.; Tunku Ahmad, T.S.; Ng, E.S. (2008) Validation of finite element analysis for a new external finger fixator to correct flexion deformity - a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Abd Razak, N.A.; Abu Osman, N.A.; Wan Abas, W.A.B.; Ahmad Fu'ad, A.N. (2011) Comparison study of the transradial prosthetics and biological hand using motion analysis approach. In: International MultiConference of Engineers and Computer Scientists 2011, IMECS 2011, 2011, Kowloon.

Abdul Ghani, S.; Lee, Y.F. (2015) Exploring the perception of lifestyle housing development in Malaysia. In: The Asia Pacific Network for Housing Research (APNHR) 2015., 09 - 12 April 2015, Asia Cultural Complex, Gwangju, South Korea..

Abdul Rahim, H.; Ibrahim, F.; Taib, M.N.; Abdul Rahim, R.; Mad Sam, Y. (2008) Monitoring haemoglobin status in dengue patients using ARMAX model. In: International Symposium on Information Technology 2008, ITSim, 2008, Kuala Lumpur.

Abdullah, N.; Gazelle, G. (2014) Technology and literacy in a synergy: Understanding children techno-literacy for e-book design. In: Fourth Asian Literature and Librarianship, 03-06 April 2014, Osaka, Japan. (Submitted)

Abdullah, S.; Muhammad, A. (2008) The development of entrepreneurship in Malaysia: State-led initiatives. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Aboodarda, S.J.; Muhamed, A.M.C.; Ibrahim, F.B.; Hamid, M.S.B.A. (2009) Electromyographic activity using elastic resistance and nautilus machine exercises. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Aboodarda, S.J.; Yusof, A.; Abu Osman, N.A.; Ibrahim, F. (2011) Two practical strategies for developing resultant muscle torque production using elastic resistance device. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Abu Bakar, Z.; Zainol, Z. (2010) The design of a DSS for the selection of ERP system and consultant. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Adib Kadri, N. (2012) The ABCs of XMLs journal publishing for digital age and beyond. In: Asia Pacific Association of Medical Editors Convention 2012, 31 August - 03 Sep 2012, Kuala Lumpur.

Aeinehvand, M.M.; Moebius, J.; Harun, S.W.; Abd Rahman, N.; Madou, M.; Ibrahim, F. (2012) The effects of placement and geometry on thermo-pneumatic pumping on centrifugal microfluidic compact disc (CD) platforms. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Afiqah, S.; Mohammad Naqib, H.; Mohd Anuar, R. (2015) Penggunaan teknologi pengesanan halal terhadap produk makanan: Kajian menurut perspektif hukum Islam. In: The 2nd International Convention on Islamic Management 2015, 4-5 November 2015, Academy of Islamic Studies, University of Malaya, Kuala Lumpur.

Afiqah, S.; Mohd Anuar, R. (2015) Isu-isu halal dalam produk berasaskan daging. In: Prosiding Seminar Fiqh Semasa (SeFis)2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Aghabozorgi, S.R.; Teh, Y.W. (2009) Dynamic modeling by usage data for personalization systems. In: 13th International Conference Information Visualisation, 15-17 July 2009, Barcelona, Spain.

Ahmad, R.; Hin, K.W. (2007) Interactive Software Engineering Learning Environment. In: Research Excellence and Knowledge Enrichment in ICT: Proceeding of the 2nd International Conference on Informatics, 27th - 28th November 2007, Petaling Jaya, Selangor, Malaysia..

Ainin, S.; Kamarulzaman, Y.; Farinda, A.G. (2010) An assessment of technological competencies on professional service firms business performance. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Aishah, A.B. (2015) Reinstating the soul in engineering laboratory work: Direct observation assessment method. In: International Conference on Engineering Education and Research 2015, 19-21 December 2015, Madinah, Kingdom of Saudi Arabia.

Al-Faqheri, W.; Ibrahim, F.; Thio, T.H.G.; Arof, H.; Madou, M. (2013) Novel liquid equilibrium valving on centrifugal microfluidic CD platform. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2011) Virtual collaborative R&D teams in Malaysia manufacturing SMEs. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), February 26-28, Hotel Royal, Singapore.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Zahari (2010) Virtual R&D teams: a potential growth of education-industry collaboration. In: 2nd International Congress on Engineering Education (ICEED 2010), 8th - 9th December, Sunway Resort Hotel & Spa, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha , Z. (2010) Virtual teams: a new opportunity to develop a business. In: International Conference on Entrepreneurship Across Boundaries, 5 - 6 AUGUST, Section For Co-curricular Courses, External Faculty Electives and TITAS, University of Malaya, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Benefits and pitfalls of virtual R&D teams: an empirical study. In: 6th International Communication & Information Technology Management Conference (ICTM 2010) , February. 23-24, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Concurrent collaboration in research and development. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 October 2008, Melaka, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Dealing with virtual R&D teams in new product development. In: The 9th Asia Pacific Industrial Engineering & Management Systems Conference and the 11th Asia Pacific Regional Meeting of the International Foundation for Production Research, 3 - 5 December, Nusa Dua, Bali - Indonesia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Envisages of new product developments in small and medium enterprises through virtual team. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Literature, principle and the basics of network value creation in R&D: the relationship with economy. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) New product development in virtual environment. In: 2008 International Conference on Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 21st – 23rd October, UIBE, Beijing, China.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) R&D networking and value creation in SMEs. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) SMEs and virtual R&D teams: a motive channel for relationship between SMEs. In: The International Conference for Technical Postgraduates (TECHPOS 2009), 14-15 December, The Legend Hotel, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) SMEs: ERP or virtual collaboration teams. In: First Enterprise Resource Planning conference, January 27-28, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual R&D Teams for NPD in SMEs: Past, Present and Future Trend. In: APCMOTTE2008 (Asia pacific Conference on Management of Technology and Technology Entrepreneurship) , 29-30 October, Melaka, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual R&D teams: a sustainable infrastructure for promoting SMEs. In: 2nd Engineering Conference (EnCon 2008), 18-19 December, Crowne Plaza Riverside Hotel, Kuching, Sarawak, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual R&D teams: innovation and technology facilitator. In: Engineering Education in 2025, 11-12 May, School of Engineering and Technology, University of Tehran, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual environments innovation and R&D activities: management challenges. In: Proceedings of the International Graduate on Engineering and Science (IGCES'08), 23 - 24 December, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual teams and management challenges. In: 1st Executive MBA Conference, 18-19, May, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtual teams for NPD – an innovative experience for R&D engineers. In: International Conference on Advances in Mechanical Engineering, 24-25, June, Concorde Hotel, Shah Alam, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) Virtuality, innovation and R&D activities. In: 14th International Conference on Thinking (2009 Malaysia) -Theme "Thinking Minds: Nurturing the Design of a Better Future", 22-26 June, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2009) A conceptual model of virtual product development process. In: 2nd Seminar on Engineering and Information Technology, (SEIT 2009), 8th - 9th July, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia.

Ali, A.S.; Au-Yong, C.P.; Ling, S.C. (2014) Managing refurbishment projects through selection of procurement system: The case of Malaysia. In: Proceedings of the 2nd International Conference on Sustainable Development, 26-27 Sep 2014, Rome, Italy.

Alibeigi, A.; Asemi, A.; Munir, A.B.; Obaidellah, U.H. (2014) Adequacy assessment of time of dispatch rules using fuzzy TOPSIS method. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Alibeigi, A.; Munir, A.B. (2016) Electronic contracts, the Malaysian perspective. In: 10th International Conference on E-Commerce with Focusing on e-Tourism (ECDC), 15-16 April 2016, Isfahan, Iran.

Ambran, S.; Holmes, C.; Gates, J.C.; Webb, A.S.; Mahamd Adikan, F.R.; Smith, P.G.R.; Sahu, J.K. (2010) Micromachined multimode interference device in flat-fiber. In: Photonics Global Conference 2010, 14-16 Dec 2010, Singapore.

Anari, N.; Saboohi, H.; Ahakian, G. (2014) A comparative study of testing semantic web services. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Ang, T.F.; Ling, T.C.; Phang, K.K.; Por, L.Y. (2009) Automatic web services deployment. In: World Congress on Computer Science and Information Engineering, 31 Mar - 2 Apr 2009, Los Angeles, USA. (Submitted)

Anuar, N.B.; Azlan, I.M.; Wahid, A.W.A.; Zakaria, O. (2008) SANAsms: Secure short messaging system for secure GSM mobile communication. In: European Conference on Information Warfare and Security, 30 Jun-1 Julai 2008, University of Plymouth, UK. (Submitted)

Arifin, A.; Sun, L.C. (2007) Issues of Establishing GeRaNIUM Grid Portal in the GeRaNIUM Project. In: Research Excellence and Knowledge Enrichment in ICT: Proceeding of the 2nd International Conference on Informatics, 27th - 28th November 2007, Petaling Jaya, Selangor, Malaysia..

Asemi, A.; Baba, M.S.; Asemi, A.; Haji Abdullah, R.; Idris, N. (2014) Fuzzy multi criteria decision making applications: a review study. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Ayusoff, N.; Soin, N.; Abd Rahman, N.; Raja Abd Rahman, R.N.Z.; Abd Kahar, M.K.B.; Ibrahim, F. (2009) Binding characteristics study for dengue virus non-structural protein 1 of antigen and Its antibody by using circular dichroism technique. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Aziz, A.A. (2014) Investigating the robustness of the TSP routes through the recognition of special structured matrices. In: Conference of the International Federation of Operational Research Societies, 13-18 July 2014, Barcelona, Spain. (Submitted)

Bahri, S. (2010) Enhancing the delivery of library’s services through the implementation of an emerging information technology: a process framework. In: Pacific Asia Conference in Information System, 9-12 July 2010, Taipei,Taiwan.

Bahri, S.; Jaafar, N.I. (2014) Against all odds: how a government's open source software (OSS) implementation survived. In: 25'h Australasian Conference on Information Systems, 08-10 Dec 2014, Auckland, New Zealand. (Submitted)

Balakrishnan, V. (2014) Learning via a social media enabled tool: Do learning styles make a difference? In: International Conference on Distance Learning and Education, 08-09 Oct 2014, Switzerland.

Balakrishnan, V. (2011) An intelligent diagnostic system for diabetes using rule based reasoning and object-oriented methodology. In: IADIS Multi Conference on Computer Science and Information Systems, 24-26 Jul 2011, Rome, Italy.

Balakrishnan, V.; Lloyd-Yemoh, E. (2014) Stemming and lemmatization: A comparison of retrieval performances. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2011) Approximation technique for prosthetic design using numerical foot profiling. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2011) Prosthetic foot design: the significance of the normalized ground reaction force. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Bimba, A.; Ismail, M.A.; Idris, N.; Jaafar, S.; Mahmud, R. (2015) Towards enhancing the compilation of Al-Hadith text in Malay. In: International Conference on World Islamic Studies (ICWIS 2015), 08-09 Mac 2015, Seoul, South Korea.

Chai, C.H.; Khadijah, R.; Chan, L.K. (2015) A phantom study on factors influencing exposure indicator (EI). In: 20th Asia Australasia Conference of Radiological Technologists in Conjuction with 2nd Southeast Asia Radiographers Conference and 3rd Asia Radiation Therapy Symposium, 20 - 23 August 2015, Singapore Suntec Convention and Exhibition Centre.

Chong, T.; Pan, S.L.; Leong, C.; Bahri, S.; Ahmad Khan, A.F. (2014) Use of social media in disaster relief during the Kuantan (Malaysia) flood. In: 35th International Conference on Information Systems, 14-17 Dec 2014, Auckland, New Zealand. (Submitted)

Dezdar, S.; Ainin, S. (2010) ERP implementation success in Iran: Examining the role of system environment factors. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Dumanig, F.P.; David, M.K.; Jubilado, R. (2011) Computer-Mediated reading and its impact on learners' reading comprehension skills. In: Proceedings of the 10th European Conference on E-Learning, 10-11 Nov 2011, United Kingdom.

Edzan, N.N. (2010) Are you on Facebook? we are. In: Emerging Trends and Technologies in Libraries and Information Services , June 3-5, 2010, India.

Edzan, N.N. (2012) Enhancing information discovery through mobile technologies country report: Malaysia. In: 8th Meeting of the ASEAN University Network Inter-Library Online (AUNILO), 1-2 June 2012, National University of Singapore, Singapore.

Edzan, N.N. (2011) Increasing the visibility of our electronic resources. In: iGroup Online Conference 2011.

Edzan, N.N. (2009) Institutional repositories. In: 3-Day Institutional Repository Workshop Using DSPACE for members of AUNILO, 25-27 MAY 2009.

Edzan, N.N. (2012) Institutional repositories and libraries: being visible. In: Asia-Pacific Association of Medical Editors Convention 2012.

Edzan, N.N. (2015) University libraries as archives: The Malaysian experience. In: International Conference on Library and Information Science, 23-25 August 2015, Osaka, Japan.

Elham, M.; Vimala, B. (2015) Evaluating reputation of agents in e-commerce multi-agent environments. In: Proceedings of the 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May 2015,, Langkawi, Malaysia.

Faisal, T.; Ibrahim, F.; Taib, M.N. (2008) Determination of the bioimpedance analysis parameters in dengue patients using the self organizing map. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Faridah, O.; Alaa Eldin, M.E. (2014) Linking the water quality model with the real-time map and ambient phenomena. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Gareth Jones, E.B. (2012) Distribution of marine fungi, and fungal-like organisms, in the South China Sea , and their potential commercial use in industry and pharmaceutical application. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Gholizadeh, H.; Abu Osman, N.A.; Luviksdottir, A.G.; Kamyab, M.; Eshraghi, A.; Ali, S.; Wan Abas, W.A.B. (2011) A new method for measuring pistoning in lower limb prosthetic. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Hamid, S. (2011) Making sense of the use of online social networking in higher education: An analysis of Empirical data using activity theory. In: 6th Mediterranean Conference on Information Systems, 03-05 Sep 2011, Cyprus.

Haque, A.; Won, Y.S.; Haseeb, A.S.M.A.; Masjuki, H.H. (2010) Investigations on Zn-Al-Ge alloys as high temperature die attach material. In: Electronics System Integration Technologies Conference, 13-16 September 2010, Berlin, Germany.

Hartomo, -; Taha, Z.; Hastutiningsih, E.D. (2009) Analysis of ergonomics workstation layout design using analytical hierarchy process. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Hasbullah, M.; Sadri, R.; Shah, M.H.; Azizan, S.A.; Mohd Noor, S.N. (2014) Teaching the Islamic worldview of environmental ethics to students of science in Malaysia. In: Asian Bioethics Conference, 01-09 Nov 2014, Kumamoto, Japan.

Hashim, H.A.; Abdul Hamid, S.H.; Wan Rozali, W.A. (2007) A survey on mobile games usage among the Institute of Higher Learning (IHL) students in Malaysia. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Hasikin, K.; Ibrahim, F.; Soin, N. (2008) Determination of design parameters of a biosensor for human artery pulse wave detection. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Hasikin, K.; Ibrahim, F.; Soin, N. (2008) Modeling of a micro-diaphragm biosensor for human artery pulse wave detection. In: 2008 IEEE International Conference on Semiconductor Electronics, ICSE 2008, 2008, Johor Bahru, Johor.

Hasikin, K.; Soin, N.; Ibrahim, F. (2010) Micro-diaphragm performance analysis for polyimide diaphragm. In: 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, 2010, Melaka .

Hasikin, K.; Soin, N.; Ibrahim, F. (2009) Modeling of a polyimide diaphragm for an optical pulse pressure sensor. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Hindia, M.N.; Reza, A.W.; Dakkak, O.; Awang Nor, S.; Noordin, K.A. (2014) Cloud computing applications and platforms: a survey. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Hussain, M.; Abdul Wahab, A.W.; Anuar, N.B.; Salleh, R.; Md Noor, R. (2015) Pixel value differencing steganography techniques: Analysis and open challenge. In: IEEE International Conference on Consumer Electric, 06-08 June 2015, Taiwan, China. (Submitted)

Ibrahim, F.; Abas, W.A.B.W.; Taib, M.N. (2004) Analysis of bioelectrical tissue conductivity in Malaysian adults. In: IEEE TENCON 2004 - 2004 IEEE Region 10 Conference: Analog and Digital Techniques in Electrical Engineering, 2004, Chiang Mai.

Ibrahim, F.; Ahmad, S.A. (2012) Assessment of upper body muscle activity during salat and stretching exercise: a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Ibrahim, F.; Ahmad, S.A. (2012) Investigation of electromyographic activity during Salat and stretching exercise. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Ibrahim, F.; Ahmad, W.A.W. (2008) Study of heart rate changes in different salat's positions. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, F.; Basheer Ali, J.; Jaais, F.; Nasir Taib, M. (2001) Expert system for early diagnosis of eye diseases infecting the Malaysian population. In: IEEE Region 10 International Conference on Electrical and Electronic Technology, 2001, Singapore.

Ibrahim, F.; Chae, J.H.; Arifin, N.; Zarmani, N.M.; Cho, J. (2007) EMG analysis of facial muscles exercise using oral cavity rehabilitative device. In: 2006 IEEE Region 10 Conference, TENCON 2006, 2007, Hong Kong.

Ibrahim, F.; Jahanshahi, P.; Abd Rahman, N.; Abdul Kahar, M.K.B.; Madou, M.; Nozari, A.A.; Soin, N.; Md Dawal, S.Z.; Abi Samra, K. (2010) Analysis and experiment of centrifugal force for microfluidic ELISA CD platform. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Ibrahim, F.; Ooi, K.F.; Ismail, N.A.; Taib, M.N.; Wan Abas, W.A.B. (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, F.; Ooi, K.F.; Ismail, N.A.; Taib, M.N.; Wan Abas, W.A.B. (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, F.; Tiong, C.K.; Ismail, N.A.; Taib, M.N. (2005) Analysis of mass distribution in dengue patients using bioelectrical impedance. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Ibrahim, M.N.M.; Ibrahim, F.; Razack, A.H. (2008) Web based online diagnosis for erectile dysfunction using International Index of Erectile Function (IIEF). In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, N.J.; Mohd Yusoff, M.Y.Z.; Razak, Z.; Raja Yusof, R.J. (2012) Mobile application of Quran and Arabic language for interactive and self learning assistant: A review. In: The 2nd Annual International Qur'anic Conference 2012, 22-23 Feb 2012, University of Malaya.

Idris, N.; Loh, S.C.; Mohd Nor, N. (2008) Classroom assessment system for teaching and learning (CASTLe). In: Conference on Research in Education 2008 , 22-23 Dec 2008, Auditorium Perdanasiswa, UM.

Jahanshahi, P.; Md Dawal, S.Z.; Ibrahim, F.; Nozari, A.A.; Soin, N. (2010) Development of a low-cost and portable device controller for point-of-care medical diagnostics. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Jamil, Z.; Yunus, N.A.M.; Suffian, M.; Ibrahim, S. (2013) Anaerobic co-digestion of food waste for biohydrogen production. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013, 2013, Langkawi.

Kadri, N.A.; Raha, M.G.; Abu Osman, N.A.; Wan Abas, W.A.B. (2008) The first decade of biomedical engineering degree program at the University of Malaya: experiences and achievements. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Karim, M.R.; SaifizuI, A.A.; Yamanaka, H. (2014) The effect of gross vehicle weight on platoon speed and size characteristics on two-lane road. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Karman, S.; Hasikin, K.; Ting, H.N.; Ng, S.C.; Abdul Wahab, A.K.; Lim, E.; Hamzaid, N.A.; Wan Abas, W.A.B. (2011) OBE implementation and design of continual quality improvement (CQI) for accreditation of biomedical engineering program University of Malaya. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Kasman, M.; Ibrahim, S. (2010) Application of response surface methodology in optimization of cadmium adsorption by raw rice husk. In: 2010 International Conference on Environmental and Agriculture Engineering, ICEAE 2010, 2010, Kyoto.

Kaur, K.; Ali, H. (2015) Examining children as web users: Methodological considerations. In: International Conference on Qualitative and Quantitative Methods in Libraries , 26-29 May 2015, Paris, France. (Submitted)

Kaur, W.; Vimala, B. (2016) Sentiment analysis technique: A look into support vector machine and naive bayes. In: International Conference on IT, Mechanical & Communication Engineering (ICIME 2016), 02-03 January 2016, Pattaya, Thailand.

Khamis, N.A.; Chin Yang, L.; Nordin, A. (2014) Automated call receiving and forwarding mechanism for supporting integrated disaster management system. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Khan, S.; Gani, A.; Abdul Wahab, A.W.; Bagiwa, M.A. (2015) SIDNFF: Source identification network forensics framework for cloud computing. In: IEEE International Conference on Consumer Electric, 06-08 Jun 2015, Taiwan, China. (Submitted)

Khan, S.; Gani, A.; Sreekandath, M. (2011) The routing performance of Logarithmic-hop Structured P2P overlay. In: 2011 IEEE Conference on Open Systems (ICOS2011), 25-28 Sep 2011, Langkawi.

Leong, H.Y.; Yap, B.K.; Navas, K.; Mohd Rusli, I.; Tan, L.C.; Faiz, M. (2013) Development of insulated cu wire stitch bonding. In: 1st International Conference on the Science & Engineering Materials , Sunway Putra Hotel, Kuala lumpur, Malaysia.

Leong, H.Y.; Yap, B.K.; Navas, K.; Mohd Rusli, I.; Tan, L.C.; Muhammad, F. (2013) In-depth study and characterization of insulated Cu wire ball bonding. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Leow, R.S.; Ibrahim, F.; Moghavvemi, M. (2007) Development of a steady state visual evoked potential (SSVEP)-based brain computer interface (BCI) system. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Lim, C.H.; Chan, C.S. (2012) A fuzzy qualitative approach for scene classification. In: World Congress on Computational Intelligence , 10-15 June 2012, Brisbane, Australia.

Loo, C.; Bardia, Y. (2012) Sparse F-IncSFA for action recognition. In: JSME Conference on Robotics and Mechatronics, 27-29 May 2012, Hamamatsu, Japan.

Loo, C.K.; Liew, W.S.; Sayeed, M.S. (2012) Genetic ensemble biased ARTMAP method of ECG-Based emotion classification. In: International Conference on Intelligent Interactive Multimedia Systems and Services, 23-25 May 2012, Gifu, Japan.

Lu, T.; Wu, L.; Ma, X.; Shivakumara, P.; Tan, C.L. (2014) Anomaly detection through spatio-temporal context modeling in crowded scenes. In: International Conference on Pattern Recognition (ICPR) , 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Maah, M.J.; Edzan, N.N. (2009) Persepsi pengguna terhadap perpustakaan digital. In: Persidangan Perpustakaan Digital ke-5, 20-22 Julai 2009, Kuala Lumpur.

Mahamd Adikan, F.R.; Ali, N.M.; Mokhtar, N.; Mubin, M. (2009) Recent Findings Pertaining To Factors Contributing To The Poor Academic Performance Of Undergraduate Students In The Department Of Electrical Engineering, University Of Malaya, Kuala Lumpur, Malaysia. In: International Engineering Education Conference, 16-19 May 2009, Madinah, Saudi Arabia. (Submitted)

Mahdavifard, M.H.; Haseeb, A.S.M.A.; Arafat, M.M. (2013) Reflow of Sn-3.8Ag-O.7Cu solder on Ni substrate in presence of Mo nanoparticles. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mahshuri, Y.; Amalina, M.A. (2013) Hardness and compressive properties of calcium carbonate derived from clam shell filled unsaturated polyester composites. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mahzan, N. (2014) Examining navigators' job satisfaction in royal Malaysian air force through the lenses of Herzberg's motivation- hygiene theory. In: International Conference on Computer and Business Management (ICCBM 2014), 02-03 June 2014, London, UK. (Submitted)

Maisarah, L.; Rahbari, R.G.; Hamdi, M.; Fadzil, M.; Farazila, Y. (2013) Characteristics of hybrid microwave sintering of Zn-AI-Cu-Mg alloy. In: 1st International Conference on the Science & Engineering Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur.

Malakooti, H.; Jalooli, A.; Jabbarpour, M.R.; Marefat, A.; Md Noor, R. (2014) Opportunistic XOR-coding content propagation in VANET. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Maryam, K.A.; Tehereh, M. (2014) Avant Garde modernization and new technology : Conceptual review of literature. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014, Istanbul, Turkey.

Mazlan, M.H.; Abu Osman, N.A.; Wan Abas, W.A.B. (2011) Hip 3D joint mechanics analysis of normal and obese individuals' gait. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Md Noor, R.; Syed Jamal, S.N.S.; Zakaria, K.H. (2012) Parental mobile control system for children’s internet use. In: International Conference on Information Society, 25-28 June 2012, London, UK.

Mehdi, A.; Rozainah, M.Z.; Pozi, M. (2012) A review of methods of participatory management of mangrove forest conservation. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Mekhilef, S. (2010) Renewable energy resources and technology practices in Malaysia. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Mofachirul, I.; Roslan, H.; Saiful Islam, A.B.M. (2013) Behaviour of peat-added composite bricks in low cost building construction. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mohamed Saaid, M.F.; Wan Abas, W.A.B.; Aroff, H.; Mokhtar, N.; Ramli, R.; Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohammad Aizat, J.; Mohd Mahyeddin, M.S.; Mohd Anuar, R. (2015) Penggunaan alkohol dalam penghasilan produk minuman dan makanan menurut perspektif fiqh. In: Prosiding Seminar Fiqh Semasa (SeFis)2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Mohammad Naqib, H.; Nur Hidayati, Z.; Mohd Anuar, R. (2015) Kesan perkembangan sains dan teknologi kepada perubahan ijtihad fiqh: Analisis terhadap tempoh maksimum kehamilan dan darah haid perempuan mengandung. In: Prosiding Seminar Fiqh Semasa (SeFis) 2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Mohd Din, M.A.; Karim, M.R.; Saritha, P.; Mokhtar Azizi, N.Z. (2010) Development of GIS-based Kuala Lumpur transit information system. In: 3rd International Conference on Geoinformation Technology for Natural Disaster Management, 19-20 Oct 2010, Chiang Mai, Thailand. (Submitted)

Mohd Faizal, H.; Ilina Syazwani, M. (2015) Students Repository: Online archive for academic exercise, dissertation and theses. In: 7th Qualitative and Quantitative Methods in Libraries International Conference (QQML2015), 26-29 May 2015, Paris, France.

Mohd Rum, S.N.; Ismail, M.A. (2014) Ontology development of metacognitive support system for novice programmers (MSSNP). In: 2014 International Symposium on Technology Management and Emerging Technologies (ISTMET 2014), 27-29 May 2014, Bandung, Indonesia.

Mohebali, A.; Chiew, T.K. (2014) Redefining game engine architecture through concurrency. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Mohktar, M.S.; Ibrahim, F. (2008) Assessment of salat taraweeh and fasting effect on body composition. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Mohktar, M.S.; Ibrahim, F.; Ismail, N.A. (2005) Bioelectrical impedance analysis in assessing the chances of obtaining coronary heart disease in obese subjects. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Mukhtar, S.R.; Shanmugam, S.A.; Ibrahim, F. (2005) Development of a control system for laser doppler imaging scanning technique using labview. In: 2005 1st International Conference on Computers, Communications and Signal Processing with Special Track on Biomedical Engineering, CCSP 2005, 2005, Kuala Lumpur.

Mustafa, M.; Ainon, R.N.; Zainuddin, R.; Md Don, Z.; Knowles, G. (2011) Assessing the naturalness of Malay emotional voice corpora. In: International Conference on Speech Database and Assessments, 26-28 Oct 2011, Hsinchu, Taiwan.

Naji, S.; Zainuddin, R.; A. Jallb, H.; Abou Zaid, M.; Eldouber, A. (2011) Neural network-based face detection with partial face pattern. In: International Arab Conference on Information Technology, 11-14 Dec 2011, Riyadh, Arab Saudi.

Ng, K.H. (2012) The evolving landscape of scholarly publishing. In: Asia Pacific Association of Medical Editors Convention 2012, 31 August - 03 Sep 2012, Kuala Lumpur.

Norman, A.A.; Yasin, N.M. (2009) An analysis of information systems security management (issm): the hierarchical organizations vs. emergent organization. In: 4th International Conference for Internet Technology and Secured Transactions , 9-12 Nov 2009, London,UK.

Nur Farhani, Z.; Mohd Anuar, R.; Shaikh Mohd Saifuddeen, S.M.S. (2015) Ke arah pembangunan industri peranti perubatan halal: Isu-isu dalam rantaian bekalan halal. In: Prosiding Seminar Fiqh Semasa (SeFis), 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Oshkour, A.A.; Abu Osman, N.A.; Davoodi, M.M.; Bayat, M.; Yau, Y.H.; Wan Abas, W.A.B. (2011) Impact load and mechanical respond of tibiofemoral joint. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A.; Abu Osman, N.A.; Davoodi, M.M.; Bayat, M.; Yau, Y.H.; Wan Abas, W.A.B. (2011) Knee joint stress analysis in standing. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Othman, S.H.; Ibrahim, F.; Omar, S.Z.; Rahim, R.B.A. (2008) Flexion relaxation phenomenon of back muscles in discriminating between healthy and chronic low back pain women. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ow, S.H.; Lim, P.S (2008) Development of e-sign dictionary using 3D technology for the deaf community. In: International Business Information Management Association Conference, 4-6 Jan 2008, Marrakech, Morocco.

Peyman, J.; Akbar Nozari, A.; Soin, N.; Ibrahim, F. (2009) Evaluation of pressure changes for capillary and fishbone valves in Lab-on-CD systems. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Por, L.Y. (2007) IDD personalization framework for e-learning. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Rahim, H.A.; Ibrahim, F.; Taib, M.N. (2008) Model order selection criterion for monitoring haemoglobin status in dengue patients using ARX model. In: 5th International Conference on Information Technology and Applications in Biomedicine, ITAB 2008 in conjunction with 2nd International Symposium and Summer School on Biomedical and Health Engineering, IS3BHE 2008, 2008, Shenzhen.

Rahim, H.A.; Ibrahim, F.; Taib, M.N. (2007) A novel prediction system in dengue fever using NARMAX model. In: International Conference on Control, Automation and Systems, ICCAS 2007, 2007, Seoul.

Raja Ghazilla, R.A.; Taha, Z. (2009) Development of a framework for disassemblability design optimization for sustainable manufacturing. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Raja Yusof, R.J.; Zainuddin, R.; Mohd Yusoff, Z. (2010) Parallel versus perpendicular plots. In: Trends in Electronics Conference, 21-24 Nov 2010, Fukuoka, Japan.

Rajendran, S.; Arof, H.; Ibrahim, F.; Yegappan, S. (2008) Review on technical aspects of image acquisition, analysis and retrieval for leukaemia cells. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Rasiah, R. (2008) Electronic clustering and technological intensities in Indonesia and Malaysia. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Razavi, A.M.; Ahamad, R. (2011) Dealing with human issues throughout systems implementation: Guidelines from a psychodynamic perspective. In: 3rd International Conference on Information and Financial Engineering, 19-21 Aug 2011, Shanghai, China.

Razman, R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Cheong, J.P.G. (2011) Temporal characteristics of the final delivery phase and its relation to tenpin bowling performance. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Rizwanul Fattah, M.; Masjuki, H.H.; Kalam, M.A.; Masum, B.M. (2013) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Safee, M.K.M.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Said, Z.; Sajid, M.H.; Alim, M.A.; Saidur, R. (2013) Viscosity data of al203/water and al2031 (eg/water) mixture nanofluids and the hysteresis phenomenon. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Saka, S.; Munusamy, M.V.; Shibata, M.; Tono, Y.; Miyafuji, H. (2008) Chemical constituents of the different anatomical parts of the oil palm (Elaeis guineensis) for their sustainable utilization. In: Seminar Proceedings - Natural Resources & Energy Environment JSPS-VCC Program on Environmental Science, Engineering and Ethics (Group IX), 24-25 November 2008, Kyoto, Japan.

Salahuddin, M.H.R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F.; Rahim, R.B.A. (2008) Preliminary study: The impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salahuddin, M.H.R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F.; Rahim, R.B.A. (2008) Preliminary study: the impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salim, S.S.; Asemi, A.; Champiri, Z.D.; Shahamiri, S.R. (2014) Multi-Criteria impact assessment of MVML in performance of interactive systems for people with disabilities. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Salleh, N.A.; Lim, K.S.; Ibrahim, F. (2009) AR modeling as EEG spectral analysis on prostration. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Sardareh, S.A.; Aghabozorgi, S.; Dutt, A. (2014) Reflective dialogues and students’ problem solving ability analysis using clustering. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Shamsulaman, K.; Abdullah, F. (2007) Study of Insect pest in mangifera indica plantation, Chuping, Perlis, Malaysia. In: The 12th Biological Sciences Graduate Congress 2007, 17-19 December 2007, Institute of Biological Sciences, Faculty of Science, University of Malaya.

Sharifah Noor Nazim, S.Y.; Ati Rosemary, M.A.; Muhammad Azzam, I. (2014) Building energy index and students’ perceived performance in public university buildings. In: World Renewable Energy Congress 2014., August 2014, London, United Kingdom..

Sharifah Noor Nazim, S.Y.; Ati Rosemary, M.A.; Muhammad Azzam, I. (2014) Conventional buildings versus green buildings: Perception of building occupants. In: 14th SCA International Conference., June 2014, Kuala Lumpur, Malaysia..

Sharifah Noor Nazim, S.Y.; Ati Rosemary, M.A.; Muhammad Azzam, I. (2014) Factors contributing to occupants’ comfort : A survey among occupants of academic buildings in a public university. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management., 07 - 09 January 2014, Bali, Indonesia..

Sharifah Noor Nazim, S.Y.; Ati Rosemary, M.A.; MuhammazAzzam, I. (2014) Green buildings in campus: An assessment of green potential for existing conventional buildings. In: 1st Regional Conference on Campus Sustainability., April 2014, Sabah, Malaysia.

Shiman, F.; Molaei, F.; Oladazimi, M.; Abd Rashid, R.; Habil, H.; Ibrahim, F. (2012) Electro-acupuncture (EA) as an adjunct therapy to methadone maintenance treatment (MMT) in heroin addiction: a study of 2D EEG power spectral topography and Morlet wavelet. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Shiman, F.; Safavi, S.H.; Vaneghi, F.M.; Oladazimi, M.; Safari, M.J.; Ibrahim, F. (2012) EEG feature extraction using parametric and non-parametric models. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Shivakumara, P.; Sharma, N.; Pal, U.; Blumenstein, M.; Tan, C.L. (2014) Gradient-angular-features for word-wise video script identification. In: International Conference on Pattern Recognition (ICPR), 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Shuib, A.S.; Siraj, S.; Abdullah, M.R.T.L. (2010) M-learning curriculum design for secondary school: A needs analysis. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Shuib, L.; Normadhi, A.B.A. (2015) Reading material personalization searching in e-learning. In: Global Conference on Teaching and Learning With Technology, 10-11 June 2015, Orchard Road, Singapore. (Submitted)

Soon, C.; Wei, H.L. (2012) A study of ship's propeller jet induced scour. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Sulaiman, K.; Fakir, M.S.; Yusli, M.N.; Abd. Wahab, F. (2011) Organic photovoltaic devices incorporating nanostructures in the photoactive layer: Towards clean solar energy generation. In: SET 2011, 10th International Conference on Sustainable Energy Technologies, 04-07 Sep 2011, Istanbul, Turkey.

Syed Abdul Kadir, S.L.; Husin, S.; Nadarajah, D. (2014) The impact of ICT on quality of life. In: Advances In Business Related Scientific Research Conference 2014, 10-12 Dec 2014, Milan, Italy. (Submitted)

Syed Ali, B. (2015) A systematic review of ADS-B performance monitoring methods. In: 2015 ATRS World Conference, 02-05 July 2015, University Town, National University of Singapore. (Submitted)

Syed Yahya, S.N.N.; Mohd Ariffin, A.R.; Ismail, M.A. (2015) Energy consumption vs. users' perceptions: A quantitative study of energy and comfort in university campus. In: Passive Low Energy Architecture (PLEA) 2015: Architure in revolution, 09-11 September 2015, Bologna.Italy.

Taha, Z.; Deboucha, A.; Dahari, M. (2010) Small-scale helicopter system identification model using recurrent neural networks. In: Trends in Electronics Conference, 21-24 Nov 2010, Fukuoka, Japan.

Taha, Z.; Muhammad, M.Z. (2009) Evaluation of corporate initiatives in ergonomics: Effectiveness of ergonomics training in an oil and gas refinery company. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Taha, Z.; Sakundarini, N.; Raja Ghazilla, R.A.; Gonzalez, J. (2009) An intelligent approach to recyclability evaluation in automobile design. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Taha, Z.; Yap, H.J.; Raja Ghazilla, R.A.; Ahmad, N. (2009) The ergonomics virtual reality station design (ErgoVR). In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Tan, Y.Q.; Ibrahim, F.; Moghavvemi, M. (2007) Two electrodes low voltage input EEG amplifier for brain-computer-interface. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Teh, Y.W.; Ng, H.P.; Ching, S.H. (2009) Design and development of collaborative workflow for lean production in a repair and overhaul industry. In: 8th Proceedings of the WSEAS International Conference on Applied Computer and Applied Computational Science , 20-22 May 2009, Hangzhou, China.

Tham, L.K.; Abu Osman, N.A.; Lim, K.S.; Pingguan-Murphy, B.; Wan Abas, W.A.B. (2011) Quantification of patellar tendon reflex by motion analysis. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Tharsika , T.; Haseeb, A.S.M.A.; Mohd Faizul, M.S. (2013) Fabrication and characterization of ZnO-Sn02 mixed nanostructures. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Thiam, K.C.; Renaud, K.V. (2009) A component-based reverse engineering approach: decomposing web pages to facilitate maintenance and reusability. In: Proceedings of the IASK International Conferences E-Activity and Leading Technologies & InterTIC 2009, 22-24 June 2009, Seville, Spain.

Thio, T.; Nozari, A.A.; Soin, N.; Kahar, M.K.B.A.; Dawal, S.Z.M.; Samra, K.A.; Madou, M.; Ibrahim, F. (2011) Hybrid capillary-flap valve for vapor control in point-of-care microfluidic CD. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Thio, T.H.G.; Ibrahim, F.; Al-Faqheri, W.; Soin, N.; Abdul Kahar, M.K.B.; Madou, M. (2013) Multi-level 3D implementation of thermo-pneumatic pumping on centrifugal microfluidic CD platforms. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Thirucelvam, K.; Ahmad, K.Z.; Mat Zin, M. (2008) Attracting talent from abroad: Malaysia's experience. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Tong, G.B.; Ab. Ghani, S.M.; Abdul Rahman, S. (2007) Crystallinity and Si-H bonding configuration of nc-Si:H films grown by Layer-by-layer (LBL) deposition technique at different RF power. In: International Workshop and Conference on Nanotechnology , 12-15 June 2007, Bangi, Malaysia. (Submitted)

Tuan, Z.; Farazila, Y.; Mohd, H.; Tadashi, A. (2013) Brazing of inconel 600 by active filler metal. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Ugochi Isika, N.; Ismail, M.A. (2012) SemKnow: A semantic knowledge management system for scholarly repositories. In: International Conference on Information Society, 25-28 June 2012, London, UK.

Vaneghi, F.M.; Oladazimi, M.; Shiman, F.; Kordi, A.; Safari, M.J.; Ibrahim, F. (2012) A comparative approach to ECG feature extraction methods. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012, 2012, Kota Kinabalu.

Vimala, B.; Chin Lay, G. (2015) Mobile technology and interactive lectures: The key adoption factors. In: Proceedings of the International Mobile Learning Festival 2015: Mobile Learning , MOOCs and 21st Century Learning, 21-23 May, 2015, Hong Kong SAR China.

Vimala, B.; Kaur, W. (2016) Bilingual sentiment detection - Investigating impact of tweet translation. In: Seventh International Conference on the Applications Digital Information and Web Technologies (ICADIWT 2016), 28 - 31 March 2016, Taipei, Taiwan.

Wazed, M.A.; Ahmed, S.; Bin Yusoff, N. (2008) A review of commonality models in manufacturing resources planning: state-of-the-art and future directions. In: International Conference Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 2008.

Wazed, M.A.; Ahmed, S.; Yusoff, N. (2010) Impacts of common components in multistage production system under uncertain conditions. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Wei, X.J.; Yang, Z.D.; See, L.T.; Silva, F.V.M.; Wei, G. (2013) A novel polymer based antimicrobial coating with embedded copper or copper salt particles. In: 1st International conference on the Science & Engineering of Materials , Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Wong, C.Y.; Fung, H.N. (2016) Mapping the dynamic co-evolution of technological convergence. In: International Workshop University-Industry Linkages and Innovation , 18 February 2016, Centre for Science, Technology and Innovation Policy Studies, Kyushu University, Japan.

Xu, J.; Shivakumara, P.; Lu, T.; Phan, T.Q.; Tan, C.L. (2014) Graphics and scene text classification in video. In: International Conference on Pattern Recognition (ICPR), 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Xu, J.; Shivakumara, P.; Lu, T.; Tan, C.L. (2014) 2D and 3D video scene text classification. In: International Conference on Pattern Recognition (ICPR) , 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Yafouz, B.; Kadri, N.A.; Ibrahim, F. (2012) A numerical analysis of electric field strength over planar microarray dot electrode for dielectrophoretic lab-on-chip device. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Yap, H.J.; Taha, Z.; Eng, T.H.; Chew, J.Y. (2009) Design and development of a marker-based augmented reality system using OpenCV and OpenGL. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Yap, H.J.; Taha, Z.; Ng, S.W.; Chew, J.Y. (2009) Low cost head tracking system for a desktop-based VR system using webcam. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Yeow, E.; Chiam, Y.K. (2014) Integration of safety risk assessment techniques into requirement elicitation. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Yew, M.K.; Ang, B.C.; Mahmud, H.B.; Yew, M.C. (2013) Enhancement of polypropylene twisted bundle fiber on the mechanical properties of high strength oil palm shell lightweight concrete. In: 1st International Conference on Science and Engineering of Materials, 13 - 14 November 2013, Sunway Putra Hotel, Kuala Lumpur.

Yogarajan, M.P.; Ibrahim, F.; Soin, N. (2008) Effect of electrode geometric parameters on droplet translocation in digital micro-fluidic biosensor. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Yousoof, M.; Sapiyan, M.; Kamaluddin, K. (2007) Measuring cognitive load-a solution to ease learning of programming. In: World Academy of Science, Engineering and Technology.

Yun, S.C.; Parasuraman, S.; Ganapathy, V. (2011) Dynamic path planning algorithm in mobile robot navigation. In: 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011, 25-28 Sep 2011, Langkawi.

Yusoff, N.A.; Soin, N.; Ibrahim, F. (2009) Lab-on-a-disk as a potential microfluidic platform for dengue NS1-ELISA. In: 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009, 2009, Kuala Lumpur.

Yusoff, S.; Syafiq Rosli, A. (2015) The implication of feed-in tariff funding structureand the sustainability of renewable energy in Malaysia. In: 9th International Conference on Researches in Engineering Technology and Sciences (ICRETS), 17-18 September 2015, London Imperial College, United Kingdom.

Zainah, I.; Ahmad Fahmy, K.; Adiza, J.; Azmi, I.; Mohd Effendi, D.; Aziman, M. (2014) Ambient vibration testing of damaged RC building structure. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014, Istanbul, Turkey.

Zainol, R.; Maidin, S.L. (2011) The use of GIS application in identifying youth recreational area in Subang Jaya, Selangor. In: International Conference on Urban Planning, Regional Development and Information Society, 18-20 May 2011, Essen, Germany.

Zainol, R.; Yacob, S.P. (2014) Embedding web-based geographic information system (web-based gis) in teaching and learning of history. In: 6th International Conference on Education and New Learning Technologies, 07-09 July 2014, Barcelona, Spain.

Zairul Nisham, M.; Abdul Ghani, S.; Wan Nor Azriyati, W.A.; Hanif, N.R.; Al-Sadat, Z.; Tedong, P.A. (2015) Issues in managing vertical residential building in Malaysia: Homeowners perspective. In: Asia Pacific Network for Housing Research Conference (APNHR)., 09 - 12 April 2015, Gwangju, South Korea..

Zare, M.R.; Ainon, R.N.; Seng, W.C. (2009) Content-based image retrieval for blood cells. In: 2009 Third Asia International Conference on Modelling & Simulation, 26-29 May 2009, Bali, Indonesia.

Zolhavarieh, S.; Aghabozorgi, S.; Wah, T.Y. (2014) Online pattern recognition in subsequence time series clustering. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Zolkafli, U.K.; Hanid, M.; Zakaria, N. (2009) Assesing The Performance of Construction Workers in Peninsula Malaysia. In: International Engineering Education Conference, 16-19 May 2009, Madinah, Saudi Arabia. (Submitted)

Dataset

Ale Ebrahim, N.; Ebrahimian, H.; Mousavi, M.; Tahriri, F. (2015) Does a long reference list guarantee more citations? Analysis of Malaysian highly cited and review papers. [Dataset]

Teaching Resource

Mohd Faizal, H. (2015) UM Research Repository : Guideline for depositor (2015). [Teaching Resource] (Unpublished)

Zanaria, S.U.; Mohd Faizal, H. (2011) UM Research Repository : guideline for depositor. [Teaching Resource] (Unpublished)

This list was generated on Fri Jun 24 23:53:34 2016 MYT.