Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | H | I | K | M | N | Q | R | S | T | W | Y
Number of items: 43.

A

Ahmad, Muhammad Shakeel and Pandey, Adarsh Kumar and Rahim, Nasrudin Abd (2018) Effect of Nanodiamonds on the Optoelectronic Properties of TiO2 Photoanode in Dye-Sensitized Solar Cell. Arabian Journal for Science and Engineering, 43 (7). pp. 3515-3519. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-017-2979-z.

Alam, M.A. and Jumaat, Mohd Zamin (2012) Experimental investigations on U- and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 37 (4). pp. 905-919. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-012-0213-6.

Alam, M.A. and Jumaat, Mohd Zamin (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-015-1739-1.

Ashfaq, Muhammad Husnain and Butt, Osama Majeed and Ahmed, Rana Hasnat and Selvaraj, Jeyraj and Abd Rahim, Nasrudin (2024) Improved EPS-based robust dynamic control of constant current source-based isolated dual-active-bridge dc-dc converter with reduced current stress. Arabian Journal for Science and Engineering, 49 (5). pp. 6613-6629. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-023-08353-z.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Chai, Wen Lin and Ngeow, Wei Cheong and Nawi, M.K.A. (2016) Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Materials. Arabian Journal for Science and Engineering, 41 (11). pp. 4669-4681. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-016-2224-1.

Atabani, A.E. and Badruddin, I.A. and Masjuki, Haji Hassan and Chong, W.T. and Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1452-5.

B

Badoud, Abd Essalam and Mekhilef, Saad and Bouamama, Belkacem Ould (2022) A novel hybrid MPPT controller based on bond graph and fuzzy logic in proton exchange membrane fuel cell system: Experimental validation. Arabian Journal for Science and Engineering, 47 (3). pp. 3201-3220. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-06096-3.

Badran, Ola and Mokhlis, Hazlie and Mekhilef, Saad and Dahalan, Wardiah Mohd (2018) Multi-Objective Network Reconfiguration with Optimal DG Output Using Meta-Heuristic Search Algorithms. Arabian Journal for Science and Engineering, 43 (6). pp. 2673-2686. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-017-2714-9.

C

Cheong, Huey Tyng and Sivasankaran, Sivanandam and Bhuvaneswari, Marimuthu (2018) Effect of Aspect Ratio on Natural Convection in a Porous Wavy Cavity. Arabian Journal for Science and Engineering, 43 (3). pp. 1409-1421. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-017-2948-6.

D

Dahalan, W.M. and Mokhlis, Hazlie and Ahmad, R. and Bakar, Ab Halim Abu and Musirin, I. (2014) Simultaneous Network Reconfiguration and DG Sizing Using Evolutionary Programming and Genetic Algorithm to Minimize Power Losses. Arabian Journal for Science and Engineering, 39 (8). pp. 6327-6338. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1299-9.

E

Elsersy, Wael F. and Anuar, Nor Badrul and Ab Razak, Mohd Faizal (2023) Rootector: Robust android rooting detection framework using machine learning algorithms. Arabian Journal for Science and Engineering, 48 (2). pp. 1771-1791. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-022-06949-5.

H

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. (2012) Modeling UPFC into multi-machine power systems. Arabian Journal for Science and Engineering, 37 (6). pp. 1613-1624. ISSN 13198025, DOI https://doi.org/10.1007/s13369-012-0273-7.

Hourmand, Mehdi and Sarhan, Ahmed A. D. and Sayuti, Mohd and Hamdi, Mohd (2021) A comprehensive review on machining of titanium alloys. Arabian Journal for Science and Engineering, 46 (8). pp. 7087-7123. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-05420-1.

I

Irfan, M.F. and Qurashi, A. and Alam, M.W. (2010) Metal oxide nanostructures and nanocomposites for selective catalytic reduction of nox: A review. Arabian Journal for Science and Engineering, 35 (1C). pp. 79-92.

K

Khan, Suleman and Gani, Abdullah and Wahab, Ainuddin Wahid Abdul and Singh, Prem Kumar (2018) Feature Selection of Denial-of-Service Attacks Using Entropy and Granular Computing. Arabian Journal for Science and Engineering, 43 (2). pp. 499-508. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-017-2634-8.

Koong, Gia Ing and Mokhlis, Hazlie and Jamian, Jasrul Jamani and Illias, Hazlee Azil and Dahalan, Wardiah Mohd and Aman, Muhammad Mohsin (2018) Simultaneous Network Reconfiguration with Distributed Generation Sizing and Tap Changer Adjustment for Power Loss Reduction Using Imperialist Competitive Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2779-2792. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-017-2778-6.

Kumoro, A.C. and Hasan, M. and Singh, H. (2010) Extraction of Sarawak black pepper essential oil using supercritical carbon dioxide. Arabian Journal for Science and Engineering, 35 (2B). pp. 7-16. ISSN 1319-8025,

M

Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Meor Yusoff, M.S. (2012) The effect of sintering on the physical and optical properties of Nano-TiO 2 synthesized via a modified hydrothermal route. Arabian Journal for Science and Engineering. pp. 1-11. ISSN 1319-8025,

Mahlia, Teuku Meurah Indra and Hor, C.G. and Masjuki, Haji Hassan and Husnawan, M. and Varman, M. and Mekhilef, Saad (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025,

Mohamed Nazri, Fadzli and Miari, Mahmoud Ali and Kassem, Moustafa Moffed and Tan, Chee Ghuan and Farsangi, Ehsan Noroozinejad (2019) Probabilistic Evaluation of Structural Pounding Between Adjacent Buildings Subjected to Repeated Seismic Excitations. Arabian Journal for Science and Engineering, 44 (5). pp. 4931-4945. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-018-3666-4.

N

Naganna, Sujay Raghavendra and Ibrahim, Hussein Adebayo and Yap, Soon Poh and Tan, Chee Ghuan and Mo, Kim Hung and El-Shafie, Ahmed (2021) Insights into the multifaceted applications of architectural concrete: A state-of-the-art review. Arabian Journal for Science and Engineering, 46 (5). pp. 4213-4223. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-020-05033-0.

Q

Qurashi, A. and Irfan, M.F. and Alam, M.W. (2010) In2O3 nanostructures and their chemical and biosensor applications. Arabian Journal for Science and Engineering, 35 (1C). pp. 125-145.

R

Rahman, Mahmudur and Ong, Zhi Chao and Chong, Wen Tong and Julai, Sabariah and Ng, Xiong Wei (2019) Wind Turbine Tower Modeling and Vibration Control Under Different Types of Loads Using Ant Colony Optimized PID Controller. Arabian Journal for Science and Engineering, 44 (2). pp. 707-720. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-018-3190-6.

Raja Yusof, Raja Jamilah and Zainuddin, R. and Baba, Mohd Sapiyan and Yusoff, Z.M. (2010) Qur'anic words stemming. Arabian Journal for Science and Engineering, 35 (2C). pp. 37-49. ISSN 2193-567X,

Rao, Ravinanath Narenthra and Silitonga, Arridina Susan and Shamsuddin, Abd Halim and Milano, Jassinnee and Riayatsyah, Teuku Meurah Indra and Sebayang, A. H. and Nur, Taufiq Bin and Sabri, M. and Yulita, M. R. and Sembiring, R. W. (2020) Effect of ethanol and gasoline blending on the performance of a stationary small single cylinder engine. Arabian Journal for Science and Engineering, 45 (7). pp. 5793-5802. ISSN 2193567X, DOI https://doi.org/10.1007/s13369-020-04567-7.

Razak, H.A. and Naganathan, S. and Hamid, S.N.A. (2010) Controlled Low-Strength Material Using Industrial Waste Incineration Bottom Ash and Refined Kaolin. Arabian Journal for Science and Engineering, 35 (2B). pp. 53-67. ISSN 1319-8025,

Razak, Mohd Faizal Ab and Anuar, Nor Badrul and Othman, Fazidah and Firdaus, Ahmad and Afifi, Firdaus and Salleh, Rosli (2018) Bio-inspired for Features Optimization and Malware Detection. Arabian Journal for Science and Engineering, 43 (12). pp. 6963-6979. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-017-2951-y.

Rosli, H.M. and Mokhlis, Hazlie and Naidu, K. and Jamian, J.J. and Bakar, Ab Halim Abu (2014) Improving State Estimation Accuracy Through Incremental Meter Placement Using New Evolutionary Strategy. Arabian Journal for Science and Engineering, 39 (11). pp. 7981-7989. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1397-8.

S

Safiuddin, M. and Mahmud, H.B. and Jumaat, Mohd Zamin (2011) Efficacy of ASTM saturation techniques for measuring the water absorption of concrete. Arabian Journal for Science and Engineering, 36 (5). pp. 761-768. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-011-0080-6.

Sarhan, Ahmed A. D. and Maher, Ibrahem and Hamdi, M. (2021) Development of a new cost performance index (CPI) for selecting the most suitable wire electrode in Wire-EDM machining. Arabian Journal for Science and Engineering, 46 (12). pp. 12465-12478. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-05989-7.

Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H.B. (2012) Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering, 37 (4). pp. 955-964. ISSN 13198025, DOI https://doi.org/10.1007/s13369-012-0233-2.

Sharma, Manish and Patel, Sohamkumar and Choudhary, Siddhant and Acharya, U. Rajendra (2020) Automated detection of sleep stages using energy-localized orthogonal wavelet filter banks. Arabian Journal for Science and Engineering, 45 (4). pp. 2531-2544. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-019-04197-8.

Shihab, Baten Md and Tousizadeh, Mahdi and Che, Hang Seng (2020) Continuous and Discontinuous PWM Methods for Symmetrical Six-Phase Induction Motor with Single Isolated Neutral. Arabian Journal for Science and Engineering, 45 (3). pp. 1885-1895. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-019-04267-x.

Shori, Amal Bakr and Kee, Leong Ay and Baba, Ahmad Salihin (2021) Total phenols, antioxidant activity and sensory evaluation of bread fortified with spearmint. Arabian Journal for Science and Engineering, 46 (6). pp. 5257-5264. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-020-05012-5.

Soong, Looi Sing and Liu, Michael Yong Jing and Yap, Soon Poh and Mo, Kim Hung and Jumaat, Mohd Zamin and Goh, Yingxin (2022) The potential of geopolymer in development of green coating materials: A review. Arabian Journal for Science and Engineering, 47 (10). pp. 12289-12299. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-022-06882-7.

Suk, Vicit Rizal Eh and Marlina, Anita and Hussain, Zahir and Misran, Misni (2021) N-stearoyl chitosan as a coating material for liposomes encapsulating itraconazole. Arabian Journal for Science and Engineering, 46 (6). pp. 5645-5653. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-020-05327-3.

T

Tan, Kok Tong and Suhatril, Meldi and Razak, Hashim Abdul and Lu, Dagang (2018) Seismic Vulnerability of Low- and Mid-Rise Reinforced Concrete Buildings in Malaysia Designed by Considering Only Gravity Loads. Arabian Journal for Science and Engineering, 43 (4). pp. 1641-1654. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-017-2675-z.

W

Wu, Bo and Yusof, Farazila and Li, Fuguo and Abdul Razak, Bushroa and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ibrahim, Mahmoud Zakaria (2024) Influence of friction stir processing parameters on microstructure, hardness and corrosion resistance of biocompatible Mg alloy WE43. Arabian Journal for Science and Engineering, 49 (2). 1897 – 1911. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-023-08037-8.

Y

Yau, Yat Huang and Chuah, Keng H. and Siew, M.T. (2020) The Study on Thermal Environment and Airflow Pattern in an UFAD System Under a Cooling Mode. Arabian Journal for Science and Engineering, 45 (2). pp. 891-908. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-019-04184-z.

Yau, Yat Huang and Rajput, Umair Ahmed (2022) Thermal comfort assessment and design guidelines of a VRF-Integrated stratum ventilation system for a large tropical building. Arabian Journal for Science and Engineering, 47 (12). pp. 16149-16170. ISSN 2191-4281, DOI https://doi.org/10.1007/s13369-022-06823-4.

Yunus Khan, T.M. and Badruddin, Irfan Anjum and Ankalgi, R.F. and Badarudin, Ahmad and Hungund, B.S. and Ankalgi, Fazal R. (2018) Biodiesel Production by Direct Transesterification Process via Sequential Use of Acid–Base Catalysis. Arabian Journal for Science and Engineering, 43 (11). pp. 5929-5936. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-018-3078-5.

This list was generated on Mon Nov 25 06:59:18 2024 +08.