Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | H | I | K | L | M | Y
Number of items: 15.

A

Ali, A.H. and Mashaan, N.S. and Karim, M.R. (2013) Investigations of physical and rheological properties of aged rubberised bitumen. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-6822, DOI https://doi.org/10.1155/2013/239036.

Ali, Z.A. and Yahya, R. and Sekaran, S.D. and Puteh, R. (2016) Green Synthesis of Silver Nanoparticles Using Apple Extract and Its Antibacterial Properties. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434, DOI https://doi.org/10.1155/2016/4102196.

Ali, Z.A. and Yahya, R. and Sekaran, S.D. and Puteh, R. (2016) Green Synthesis of Silver Nanoparticles Using Apple Extract and Its Antibacterial Properties. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434, DOI https://doi.org/10.1155/2016/4102196.

C

Chahrour, Mutaz K. and Hosen, Md. Akter and Goh, Yingxin and Tong, Teong Yen and Yap, Soon Poh and Khadimallah, Mohamed Amine (2021) Failure mechanisms of structural bamboo using microstructural analyses. Advances in Materials Science and Engineering, 2021. ISSN 1687-8434, DOI https://doi.org/10.1155/2021/1571905.

H

Hosen, M.A. and Jumaat, Mohd Zamin and Islam, A.B.M.S. (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434,

I

Ibrahim, M.R. and Katman, H.Y. and Karim, M.R. and Koting, S. and Mashaan, N.S. (2013) A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen. Advances in Materials Science and Engineering, 2013. pp. 1-8. ISSN 1687-8434, DOI https://doi.org/10.1155/2013/415246.

K

Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/647071.

Katman, H.Y. and Ibrahim, M.R. and Karim, M.R. and Koting, S. and Mashaan, N.S. (2016) Effect of Rubberized Bitumen Blending Methods on Permanent Deformation of SMA Rubberized Asphalt Mixtures. Advances in Materials Science and Engineering, 2016. pp. 1-14. ISSN 1687-8434, DOI https://doi.org/10.1155/2016/4395063.

L

Long, B.D. and Othman, R. and Zuhailawati, H. and Umemoto, M. (2014) Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites. Advances in Materials Science and Engineering, 2014. pp. 1-6. ISSN 1687-8434, DOI https://doi.org/10.1155/2014/160580.

M

Maghfouri, Mehdi and Shafigh, Payam and Aslam, Muhammad (2018) Optimum Oil Palm Shell Content as Coarse Aggregate in Concrete Based on Mechanical and Durability Properties. Advances in Materials Science and Engineering, 2018. pp. 1-14. ISSN 1687-8434, DOI https://doi.org/10.1155/2018/4271497.

Mamat, Azuddin and Yap, Hwa Jen and Tan, Chee Hau and Muhammad Asri, Muhammad Basril (2022) Fixture design for outer skin aircraft door manual drilling operation with finite element analysis and ergonomic consideration. Advances in Materials Science and Engineering, 2022. ISSN 1687-8434, DOI https://doi.org/10.1155/2022/4236629.

Mashaan, N.S. and Ali, A.H. and Koting, S. and Karim, M.R. (2013) Dynamic properties and fatigue life of stone mastic asphalt mixtures reinforced with waste tyre rubber. Advances in Materials Science and Engineering, 2013. pp. 1-9. ISSN 1687-8434, DOI https://doi.org/10.1155/2013/319259.

Mashaan, N.S. and Ali, A.H. and Koting, S. and Karim, M.R. (2013) Performance evaluation of crumb rubber modified stone mastic asphalt pavement in Malaysia. Advances in Materials Science and Engineering, 2013. pp. 1-8. ISSN 1687-8434, DOI https://doi.org/10.1155/2013/304676.

Y

Yeo, Shih Horng and Mo, Kim Hung and Hosen, Md. Akter and Mahmud, Hilmi (2022) Properties of cementitious repair materials for concrete pavement. Advances in Materials Science and Engineering, 2022. ISSN 1687-8434, DOI https://doi.org/10.1155/2022/3057801.

Yew, M.K. and Mahmud, H.B. and Ang, B.C. and Yew, M.C. (2015) Effects of Low Volume Fraction of Polyvinyl Alcohol Fibers on the Mechanical Properties of Oil Palm Shell Lightweight Concrete. Advances in Materials Science and Engineering, 2015. pp. 1-11. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/425236.

This list was generated on Tue Mar 19 13:04:03 2024 +08.