 | Up a level |
Abdullah, Shekh and Mohd Zubir, Mohd Nashrul Mohd and Muhamad, Mohd Ridha and Newaz, Kazi Md Salim and Oztop, Hakan F. and Alam, Md Shadab and Shaikh, Kaleemullah (2023) Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review. Energy and Buildings, 283. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2023.112805.
Ahmad, NurFarrahain Nadia and Nik Ghazali, Nik Nazri and Rani, Ahmad Taufiq Abdul and Othman, Mohammad Hafiz and Kee, Chia Ching and Jiwanti, Prastika Krisma and Rodriguez-Gomez, Arturo and Wong, Yew Hoong (2023) Finger-actuated micropump of constant flow rate without backflow. Micromachines, 14 (4). ISSN 2072-666X, DOI https://doi.org/10.3390/mi14040881.
Al-Dahiree, Omar Sabah and Ghazilla, Raja Ariffin Raja and Tokhi, Mohammad Osman and Yap, Hwa Jen and Gul, Mustabshirha (2023) Design and characterization of a low-cost and efficient torsional spring for ES-RSEA. Sensors, 23 (7). ISSN 1424-8220, DOI https://doi.org/10.3390/s23073705.
Al-shami, Mahmoud and Abdulghafor, Rawad and Aborujilah, Abdulaziz and Yagoub, Abubakar and Turaev, Sherzod and Ali, Mohammed Abdo Hashem (2023) COVID-19 tracking applications acceptance among general populace: An overview in Malaysia. Sustainability, 15 (5). ISSN 2071-1050, DOI https://doi.org/10.3390/su15054060.
Ali, Mohammed A. H. and Baggash, Muhammad and Rustamov, Jaloliddin and Abdulghafor, Rawad and Abdo, Najm Al-Deen N. and Abdo, Mubarak H. G. and Mohammed, Talep S. and Hasan, Ameen A. and Abdo, Ali N. and Turaev, Sherzod and Nukman, Yusoff (2023) An automatic visual inspection of oil tanks exterior surface using unmanned aerial vehicle with image processing and cascading fuzzy logic algorithms. Drones, 7 (2). ISSN 2504-446X, DOI https://doi.org/10.3390/drones7020133.
Amar, Muhammad and Akram, Naveed and Chaudhary, Ghulam Qadar and Kazi, Salim Newaz and Soudagar, Manzoore Elahi M. and Mubarak, Nabisab Mujawar and Abul Kalam, Md (2023) Energy, exergy and economic (3E) analysis of flat-plate solar collector using novel environmental friendly nanofluid. Scientific Reports, 13 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-023-27491-w.
Anene, Franklin A. A. and Jaafar, Che Nor Aiza and Mohamed Ariff, Azmah Hanim and Zainol, Ismail and Mohd Tahir, Suraya and Abdul Razak, Bushroa and Salit, Mohd Sapuan and Anene-Amaechi, Joy (2023) Biomechanical properties and corrosion resistance of plasma-sprayed fish scale hydroxyapatite (FsHA) and FsHA-doped Yttria-stabilized zirconia coatings on Ti-6Al-4V alloy for biomedical applications. Coatings, 13 (1). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings13010199.
Athani, Abdulgaphur and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Ahmed, N. J. Salman and Honnutagi, Abdulrazak (2023) Visualization of multiphase pulsatile blood over single phase blood flow in a patient specific stenosed left coronary artery using image processing technique. Bio-Medical Materials and Engineering, 34 (1). pp. 13-35. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-211333.
Bashir, Muhammad Nasir and Haseeb, A. S. M. A. and Naher, Sumsun and Ali, Muhammad Mahmood and Bashir, Mohamed Bashir Ali and Zaidi, Asad A. A. and Jamshaid, Muhammad and Javed, Iqra (2023) Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint. Journal of Materials Science-Materials in Electronics, 34 (4). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09465-2.
Bie, Hongling and Chen, Honghao and Shan, Lijun and Tan, C. Y. and Al-Furjan, M. S. H. and Ramesh, S. and Gong, Youping and Liu, Y. F. and Zhou, R. G. and Yang, Weibo and Wang, Honghua (2023) 3D printing and performance study of porous artificial bone based on HA-ZrO2-PVA composites. Materials, 16 (3). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16031107.
Dharma, S. and Silitonga, A. S. and Shamsuddin, A. H. and Sebayang, A. H. and Milano, Jassinnee and Sebayang, R. and Sarjianto, . and Ibrahim, H. and Bahri, N. and Ginting, B. and Damanik, N. (2023) Properties and corrosion behaviors of mild steel in biodiesel-diesel blends. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45 (2). pp. 3887-3899. ISSN 1556-7036, DOI https://doi.org/10.1080/15567036.2019.1668883.
Faizal, Wan Mohd Faizal and Khor, Chu Yee and Che Yaakob, Muhammad Nooramin and Nik Ghazali, Nik Nazri and Zainon, Mohd Zamri and Ibrahim, Norliza and Mohd Razi, Roziana (2023) Turbulent kinetic energy of flow during inhale and exhale to characterize the severity of obstructive sleep apnea patient. CMES-Computer Modeling in Engineering & Sciences, 136 (1). pp. 43-61. ISSN 1526-1492, DOI https://doi.org/10.32604/cmes.2023.022716.
Gan, Zhi Lon and Musa, Siti Nurmaya and Yap, Hwa Jen (2023) A review of the high-mix, low-volume manufacturing industry. Applied Sciences-Basel, 13 (3). ISSN 2076-3417, DOI https://doi.org/10.3390/app13031687.
Ganesan, Poo Balan and Zaib, Fathiah and Tuan Zahari, Tuan Zaharinie and Mobedi, Moghtada and Gnanasekaran, N. (2023) Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM). Applied Thermal Engineering, 218. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.119336.
Hamidi, E. and Ganesan, Poo Balan and Sharma, R. K. and Yong, K. W. (2023) Computational study of heat transfer enhancement using porous foams with phase change materials: A comparative review. Renewable & Sustainable Energy Reviews, 176. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2023.113196.
Hashim, Luqman H. and Halilu, Ahmed and Umar, Yahaya Balarabe and Johan, Mohd Rafie and Aroua, Mohamed Kheireddine and Koley, Paramita and Bhargava, Suresh K. (2023) Role of lattice strain in bifunctional catalysts for tandem furfural hydrogenation-esterification. Catalysis Science and Technology, 13 (3). pp. 774-787. ISSN 2044-4753, DOI https://doi.org/10.1039/d2cy01929a.
Hazmi, Alia Tasnim and Ahmad, Farah B. and Akmal, M. H. Maziati and Ralib, Aliza Aini Md and Ali, Fathilah Binti (2023) Fungal chitosan for potential application in piezoelectric energy harvesting: Review on experimental procedure of chitosan extraction. Alexandria Engineering Journal, 67. pp. 105-116. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2022.08.020.
Khamis, Abd Alghani and Idris, Aida and Abdellatif, Abdallah and Mohd Rom, Noor Ashikin and Khamis, Taha and Ab Karim, Mohd Sayuti and Janasekaran, Shamini and Abd Rashid, Rusdi (2023) Development and performance evaluation of an IoT: Integrated breath analyzer. International Journal of Environmental Research and Public Health, 20 (2). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph20021319.
Lee, Hui Jing and Gamel, Mansur Mohammed Ali and Ker, Pin Jern and Jamaludin, Md Zaini and Wong, Yew Hoong and Yap, Keem Siah and Willmott, Jon R. and Hobbs, Matthew J. and David, John. P. R. and Tan, Chee Hing (2023) Deriving the absorption coefficients of lattice mismatched InGaAs using genetic algorithm. Materials Science in Semiconductor Processing, 153. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2022.107135.
Liew, Shaer Jin and Ng, Siew Cheok and Mustapa, Mohd Zamakhsyary and Usop, Zuriani and Fauthan, Mohd'Akashah and bin Mahalil, Khairuddin and Tan, Chiat Oon (2023) Colour sorting of red oak, yellow poplar and maple veneers using self-organizing map: Comparisons between different camera genres. European Journal of Wood and Wood Products, 81 (3). pp. 777-789. ISSN 0018-3768, DOI https://doi.org/10.1007/s00107-022-01900-9.
Lin, Jiayi and Mo, Kim Hung and Goh, Yingxin and Onn, Chiu Chuen (2023) Potential of municipal woody biomass waste ash in the production of cold-bonded lightweight aggregates. Journal of Building Engineering, 63 (A). ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2022.105392.
Magiswaran, Kaiswariah and Norizan, Mohd Natashah and Mahmed, Norsuria and Mohamad, Ili Salwani and Idris, Siti Norhafizah and Sabri, Mohd Faizul Mohd and Amin, Nowshad and Sandu, Andrei Victor and Vizureanu, Petrica and Nabialek, Marcin and Salleh, Mohd Arif Anuar Mohd (2023) Controlling the layer thickness of zinc oxide photoanode and the dye-soaking time for an optimal-efficiency dye-sensitized solar cell. Coatings, 13 (1). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings13010020.
Mansoor, M. A. and Munawar, K. and Naeem, R. and Sarih, N. M. and Asghar, M. A. and Haider, A. and Mohd Zubir, Mohd Nashrul and Tuan Zaharinie, Tuan Zahari (2023) Aerosol-assisted facile fabrication of bimetallic Cr2O3-Mn2O3 thin films for photoelectrochemical water splitting. New Journal of Chemistry, 47 (17). pp. 8347-8354. ISSN 1144-0546, DOI https://doi.org/10.1039/d2nj06274g.
Mazlan, Mohd Rhafiq and Jamadon, Nashrah Hani and Rajabi, Armin and Sulong, Abu Bakar and Mohamed, Intan Fadhlina and Yusof, Farazila and Jamal, Nur Ayuni (2023) Necking mechanism under various sintering process parameters-A review. Journal of Materials Research and Technology-JMR&T, 23. pp. 2189-2201. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2023.01.013.
Naghavi Sanjani, Mohammad Sajad and Silakhori, Mahyar and Ang, Bee Chin and Metselaar, Hendrik Simon Cornelis and Gazafroudi, Sayed Mohammad Mousavi and Noorollahi, Younes (2023) Experimental investigation on solar water heater integrated with thermal battery using phase change material and porous media. Sustainability, 15 (8). ISSN 2071-1050, DOI https://doi.org/10.3390/su15086439.
Nalina, B. S. and Chilambarasan, M. and Tamilselvi, S. and Al Alahmadi, Ahmad Aziz and Alwetaishi, Mamdooh and Mujtaba, M. A. and Kalam, M. A. (2023) Design and implementation of embedded controller-based energy storage and management system for remote telecom. Electronics, 12 (2). ISSN 2079-9292, DOI https://doi.org/10.3390/electronics12020341.
Nawaz, Noman and Abu Bakar, Nor Kartini and Basirun, Wan Jeffrey and Shalauddin, Md and Karman, Salmah and Ibrahim, Suriani and Mahmud, Habibun Nabi Muhammad Ekramul (2023) Exploration of molecularly imprinted polymer (MIP) nanohybrid films as DNA sensors for the detection of porcine. Chemical Papers, 77 (2). pp. 987-1003. ISSN 0366-6352, DOI https://doi.org/10.1007/s11696-022-02530-4.
Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2023) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16010091.
Ramli, Siti Sarah and Jauhari, Iswadi and Manan, Hidayah and Ikhwanuddin, Mhd and Kasan, Nor Azman (2023) Effect of different C/N ratio, carbon sources, and aeration flow rates on ammonia fluctuations during start-up period of biofloc-based system. Aquaculture International, 31 (1). pp. 367-380. ISSN 0967-6120, DOI https://doi.org/10.1007/s10499-022-00981-w.
SalehHudin, Hanna Sofia and Mohamad, Edzrol Niza and Muhammad Afifi, Amalina and Wan Mahadi, Wan Nor Liza (2023) Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of voltage and nozzle configuration on the electric field and electrospun jet attributes. Journal of Manufacturing Processes, 85. pp. 544-555. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2022.11.051.
Shatar, Nursyahirah Mohd and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi (2023) Energy, exergy, economic, environmental analysis for solar still using partially coated condensing cover with thermoelectric cover cooling. Journal of Cleaner Production, 387. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2022.135833.
Shatar, Nursyahirah Mohd and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi (2023) Investigation on the performance of solar still with thermoelectric cooling system for various cover material. Renewable Energy, 202. pp. 844-854. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2022.11.105.
Su, Guangcan and Mohd Zulkifli, Nurin Wahidah and Ong, Hwai Chyuan and Ibrahim, Shaliza and Cheah, Mei Yee and Zhu, Ruonan and Bu, Quan (2023) Co-pyrolysis of medical protective clothing and oil palm wastes for biofuel: Experimental, techno-economic, and environmental analyses. Energy, 273. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2023.127221.
Thang, Le Hong and Bang, L. T. and Long, B. D. and Son, Nguyen Anh and Ramesh, S. (2023) Effect of carbonate contents on the thermal stability and mechanical properties of carbonated apatite artificial bone substitute. Journal of Materials Engineering and Performance, 32 (3). pp. 1006-1016. ISSN 1059-9495, DOI https://doi.org/10.1007/s11665-022-07169-6.
Wahab, Izzati Fatimah and Abdul Razak, Bushroa and Teck, Soon Wee and Azmi, Taium Tasneem and Ibrahim, Mahmoud Z. and Lee, J. W. (2023) Fundamentals of antifogging strategies, coating techniques and properties of inorganic materials: A comprehensive review. Journal of Materials Research and Technology-JMR&T, 23. pp. 687-714. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2023.01.015.
Wang, Chunqing and Li, Chao and Xie, Lang and Wang, Xinru and Chang, Li and Wang, Xiangming and Li, Hong Xian and Liu, Yiqiao (2023) Thermal environment and thermal comfort in metro systems: A case study in severe cold region of China. Building and Environment, 227 (1). ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2022.109758.
Wong, Yung Cheng and Wong, Yew Hoong and Ang, Bee Chin and Baharuddin, Aainaa Aqilah and Haseeb, A. S. M. A. (2023) Effects of polymerization oxidants on the fabrication of electrospun PPy/WO3 composites. Journal of Materials Science-Materials in Electronics, 34 (1). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09483-0.
Yau, Yat Huang and Chuah, Y. K. and Chuah, K. H. and Rajput, U. A. and Liew, H. J. (2023) The preliminary evaluation of design guidelines of stratum ventilation in a large tropical lecture hall. International Journal of Ventilation, 22 (1). pp. 77-99. ISSN 1473-3315, DOI https://doi.org/10.1080/14733315.2022.2161142.
Yau, Yat Huang and Rajput, Umair Ahmed (2023) Performance evaluation of an architecturally-designed vertical high capacity linear slot diffuser in a tropical atrium. Architectural Science Review, 66 (1). pp. 53-69. ISSN 0003-8628, DOI https://doi.org/10.1080/00038628.2022.2140988.
Yuan, Yindong and Pan, Song and Wang, Tongzhao and Xia, Liang and Liu, Yiqiao and Wang, Xinru and Li, Lei and Wang, Tian (2023) Experimental and numerical investigations on curing a polyester-based powder coating by catalytic infrared radiation. Applied Sciences-Basel, 13 (4). ISSN 2076-3417, DOI https://doi.org/10.3390/app13042187.
Zahid, Fahad Bin and Ong, Zhi Chao and Khoo, Shin Yee and Mohd Salleh, Mohd Fairuz (2023) Semi-automated impact device based on human behaviour recognition model for in-service modal analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (2). ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-023-04022-2.
Zainudin, Wan Zamir Zakwan Wan and Tan, Chou Yong and Hui, Tan Cai and Kar, Yap Boon and Wong, Yew Hoong (2023) Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP. Journal of Materials Science-Materials in Electronics, 34 (3). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09661-0.
