Items where Division is "Faculty of Engineering" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 560.

A

Abbasi, M.R. and Shamiri, A. and Hussain, M.A. (2018) A review on modeling and control of olefin polymerization in fluidized-bed reactors. Reviews in Chemical Engineering.

Abd Rahman, Nurul Izzah and Md Dawal, Siti Zawiah and Yusoff, Nukman and Mohd Kamil, Nabilla Sofia (2018) Anthropometric measurements among four Asian countries in designing sitting and standing workstations. Sadhana, 43 (1). p. 10. ISSN 0256-2499

Abdelrazek, Ali H. and Alawi, Omer A. and Kazi, Salim Newaz and Yusoff, Nukman and Chowdhury, Zaira Zaman and Sarhan, Ahmed Aly Diaa Mohammed (2018) A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop. International Communications in Heat and Mass Transfer, 95. pp. 161-170. ISSN 0735-1933

Abdul Hamid, Lydia and Rosli, Nenny Ruthfalydia and Khairuddin, Anis Salwa Mohd and Mokhtar, Norrima and Yusof, Rubiyah (2018) Denoising module for wood texture images. Wood Science and Technology, 52 (6). pp. 1539-1554. ISSN 0043-7719

Abdul Nasir, N. and Junaidi, Mohd Usman Mohd and Hashim, Nur Awanis and Mohamed Zuki, Fathiah and Mohamad Nor, Mohamad Iskandr and Jan, Badrul Mohamed and Chong, Wen Tong (2018) Diamine modified polymeric membranes for hydrogen/carbon dioxide separation. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Abidou, Diaa and Sarhan, Ahmed Aly Diaa Mohammed and Yusoff, Nukman and Nik-Ghazali, Nik Nazri and Awang, Md Abu Omar and Hassan, Mohsen A. (2018) Numerical simulation of metal removal in laser drilling using meshless local Petrov–Galerkin collocation method. Applied Mathematical Modelling, 56. pp. 239-253. ISSN 0307-904X

Abo-Hamad, Ali and AlSaadi, Mohammed AbdulHakim and Hashim, Mohd Ali (2018) Eutectic mixture-functionalized carbon nanomaterials for selective amperometric detection of nitrite using modified glassy carbon electrode. Journal of Electroanalytical Chemistry, 812. pp. 107-114. ISSN 1572-6657

Aboub, Youcef and Bouchafaa, Farid and Tabbache, Bekheıra and Mekhilef, Saad and Benbouzid, Mohamed E.H. and Benlahbib, Boualam (2018) Operating continuity insurance of electric vehicle by using fault-tolerant control of 7-leg inverter. International Journal of Power and Energy Systems, 38 (4). pp. 160-170. ISSN 1078-3466

Abu Hussein, Nurul Athirah and Ang, Bee Chin and Wong, Yew Hoong and Ong, Boon Hoong and Baharuddin, Aainaa Aqilah (2018) Synthesis and characterization of γ-Fe2O3 NPs on silicon substrate for power device application. Materials Research Express, 5 (6). 065020. ISSN 2053-1591

Abunama, Taher and Othman, Faridah and Younes, Mohammad K. (2018) Predicting sanitary landfill leachate generation in humid regions using ANFIS modeling. Environmental Monitoring and Assessment, 190 (10). p. 597. ISSN 0167-6369

Abutaha, Fuad and Razak, Hashim Abdul and Ibrahim, Hussein Adebayo and Ghayeb, Haider Hamad (2018) Adopting particle-packing method to develop high strength palm oil clinker concrete. Resources, Conservation and Recycling, 131. pp. 247-258. ISSN 0921-3449

Abutu, J. and Lawal, Sunday Albert and Ndaliman, Mohammed Baba and Lafia-Araga, Ruth Anayimi and Adedipe, Oyewole and Choudhury, Imtiaz Ahmed (2018) Effects of process parameters on the properties of brake pad developed from seashell as reinforcement material using grey relational analysis. Engineering Science and Technology, an International Journal, 21 (4). pp. 787-797. ISSN 2215-0986

Acharya, U. Rajendra and Akter, Ayesha and Chowriappa, Pradeep and Dua, Sumeet and Raghavendra, U. and Koh, Joel E. W. and Tan, Jen Hong and Leong, Sook Sam and Vijayananthan, Anushya and Hagiwara, Yuki and Ramli, Marlina Tanty and Ng, Kwan Hoong (2018) Use of Nonlinear Features for Automated Characterization of Suspicious Ovarian Tumors Using Ultrasound Images in Fuzzy Forest Framework. International Journal of Fuzzy Systems, 20 (4). pp. 1385-1402. ISSN 1562-2479

Acharya, U. Rajendra and Koh, Joel En Wei and Hagiwara, Yuki and Tan, Jen Hong and Gertych, Arkadiusz and Vijayananthan, Anushya and Yaakup, Nur Adura and Abdullah, Basri Johan Jeet and Mohd Fabell, Mohd Kamil and Yeong, Chai Hong (2018) Automated diagnosis of focal liver lesions using bidirectional empirical mode decomposition features. Computers in Biology and Medicine, 94. pp. 11-18. ISSN 0010-4825

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Herliansyah, Muhammad Kusumawan and Sopyan, Iis and Basirun, Wan Jefrey and Ladan, Magaji (2018) Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 32 (1). pp. 91-102. ISSN 0169-4243

Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Sutharsini, Ubenthiran (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842

Adiba, Hanis and Idris, Azlina and Dimyati, Kaharudin and Andriana, Ratna and Kassim, Murizah and Rahman, Ruhani Abdul (2018) Interference reduction using MMSE-DFE equalizer with one-third ICI-SC STFBC for MIMO-OFDMA system. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-4). pp. 53-57. ISSN 2180-1843

Adnan, R. and Sabri Adlan, Z. and Munir, Fudhail Abdul and Mahlia, Teuku Meurah Indra and Masjuki, Haji Hassan (2018) Effects of equivalence ratio on performance and emissions of diesel engine with hydrogen and water injection system at variable injection timing. International Journal of Mechanical and Mechatronics Engineering, 18 (1). pp. 106-111. ISSN 2227-2771

Aghdam, Nasim Sarrafi and Suhatril, Meldi and Hashim, Roslan and Kashani, Alireza (2018) Seismic microzonation map of Penang Island. Ingegneria Sismica, 35 (1). pp. 25-43. ISSN 0393-1420

Ahad, Irma Zulayka Mohamad and Harun, Sulaiman Wadi and Gan, Seng Neon and Phang, Sook Wai (2018) Effect of Polymerization Temperatures on Polyaniline Coated Fiber Bragg Grating Sensor for Chloroform Detection. Macromolecular Symposia, 382 (1). p. 1800088. ISSN 1022-1360

Ahmad, Bilal A. and Rusdi, Muhammad Farid Mohd and Jusoh, Zulzilawati and Latiff, Anas Abdul and Harun, Sulaiman Wadi (2018) Dual-wavelength Q-switched thulium doped fiber laser with TiO2 film saturable absorber. Optoelectronics and Advanced Materials, Rapid Communications, 12 (5-6). pp. 249-252. ISSN 1842-6573

Ahmad, Nabeel and Abnisa, Faisal and Daud, Wan Mohd Ashri Wan (2018) Liquefaction of natural rubber to liquid fuels via hydrous pyrolysis. Fuel, 218. pp. 227-235. ISSN 0016-2361

Ahmad, Norasikin and Ang, Bee Chin and Amalina, Muhammad Afifi and Bong, Chui Wei (2018) Influence of Precursor Concentration and Temperature on the Formation of Nanosilver in Chemical Reduction Method. Sains Malaysiana, 47 (1). pp. 157-168. ISSN 0126-6039

Ahmad, Pervaiz and Khandaker, Mayeen Uddin and Muhammad, Nawshad and Ahmad, Iftikhar and Rauf Khan, M. Abdul and Khan, Ayaz Arif and Khan, Ghulamullah and Khan, Amir Sada and Ullah, Zahoor and Rehman, Fida and Ahmed, Syed Muzamil and Ali, Hazrat and Rehman, Muhammad Abdur and Gulzar, Mubashar and Iqbal, Javed and Shah, Syed Tawab and Ahmed, Sohail and Shafiq, Muhammad (2018) Decomposition-adsorption-deposition: An effective and novel technique for synthesis of hexagonal boron nitride microsheets. Materials Science in Semiconductor Processing, 88. pp. 161-166. ISSN 1369-8001

Ahmad, Pervaiz and Khandaker, Mayeen Uddin and Muhammad, Nawshad and Rehman, Fida and Khan, Ghulamullah and Khan, Amir Sada and Ullah, Zahoor and Rehman, Muhammad Abdur and Ahmed, Sohail and Gulzar, Mubashar and Din, Israf Ud and Ahmed, Syed Muzamil and Ali, Hazrat and Numan, Arshid (2018) Magnesium diboride (MgB2): An effective and novel precursor for the synthesis of vertically aligned BNNTs. Materials Research Bulletin, 98. pp. 235-239. ISSN 0025-5408

Ahmed, Ali Najah and Noor, Che Wan Mohd and Allawi, Mohammed Falah and El-Shafie, Ahmed (2018) RBF-NN-based model for prediction of weld bead geometry in Shielded Metal Arc Welding (SMAW). Neural Computing and Applications, 29 (3). pp. 889-899. ISSN 0941-0643

Ahmed, Syed Muzamil and Kazi, Salim Newaz and Khan, Ghulamullah and Sadri, Rad and Dahari, Mahidzal and Zubir, Mohd Nashrul Mohd and Sayuti, Mohd and Ahmad, Pervaiz and Ibrahim, Rushdan (2018) Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 54 (3). pp. 875-882. ISSN 0947-7411

Ahmmad, Md. Shahabuddin and Masjuki, Haji Hassan and Kalam, Md. Abul (2018) Comparative corrosion characteristics of automotive materials in Jatropha biodiesel. International Journal of Green Energy, 15 (6). pp. 393-399. ISSN 1543-5075

Ajala, M.T. and Khan, Md Raisuddin and Shafie, Amir Akramin and Salami, Momoh Jimoh Emiyoka and Mohamad Nor, Mohamad Iskandr and Oladokun, Majeed Olaide (2018) Optimization of CO2 production rate for firefighting robot applications using response surface methodology. Cogent Engineering, 5 (1). pp. 1-17. ISSN 2331-1916

Akhbari, Azam and Ibrahim, Shaliza and Zinatizadeh, Ali Akbar and Bonakdari, Hossein and Ebtehaj, Isa and S. Khozani, Zohre and Vafaeifard, Mohsen and Gharabaghi, Bahram (2018) Evolutionary Prediction of Biohydrogen Production by Dark Fermentation. CLEAN - Soil, Air, Water, 47 (1). p. 1700494. ISSN 1863-0650

Akinwekomi, Akeem Damilola and Tang, Chak-Yin and Tsui, Gary Chi-Pong and Law, Wing-Cheung and Chen, Ling and Yang, Xu-Sheng and Hamdi, Mohd (2018) Synthesis and characterisation of floatable magnesium alloy syntactic foams with hybridised cell morphology. Materials & Design, 160. pp. 591-600. ISSN 0264-1275

Al Khatib, Basem and Yap, Soon Poh and El-Shafie, Ahmed (2018) Delay Factors in Reconstruction Projects: A Case Study of Mataf Expansion Project. Sustainability, 10 (12). p. 4772. ISSN 2071-1050

Al Kouzbary, Mouaz and Abu Osman, Noor Azuan and Wahab, Ahmad Khairi Abdul (2018) Sensorless control system for assistive robotic ankle-foot. International Journal of Advanced Robotic Systems, 15 (3). p. 172988141877585. ISSN 1729-8814

Al Qudah, Ayman and Ghazaly, Zuhayr Md and Mashaan, Nuha Salim and Koting, Suhana and Napiah, Madzlan and Wan Omar, Wan Mohd Sabki and Issa, Yazan (2018) Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1356-1369. ISSN 0976-6308

Al-Azzawi, Alabbas A. and Almukhtar, Aya A. and Reddy, Pinninty Harshavardhan and Dutta, Debjit and Das, Shyamal and Dhar, Anirban and Paul, Mukul Chandra and Zakaria, U.N. and Ahmad, Harith and Harun, Sulaiman Wadi (2018) Compact and flat-gain fiber optical amplifier with Hafnia-Bismuth-Erbium co-doped fiber. Optik, 170. pp. 56-60. ISSN 0030-4026

Al-Azzawi, Alabbas A. and Almukhtar, Aya A. and Reddy, Pinninty Harshavardhan and Dutta, Debjit and Das, Shyamal and Dhar, Anirban and Paul, Mukul Chandra and Zakaria, U.N. and Harun, Sulaiman Wadi (2018) A Flat-Gain Double-Pass Amplifier with New Hafnia-Bismuth-Erbium Codoped Fiber. Chinese Physics Letters, 35 (5). 054206. ISSN 0256-307X

Al-Masoodi, Ahmed Hasan Hamood and Ahmad, Fauzan and Ahmed, Mahmoud Hazzaa M. and Al-Masoodi, Abtisam Hasan Hamood and Alani, Ibrahim A.M. and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Q-switched and mode-locked ytterbium-doped fibre lasers with Sb2Te3 topological insulator saturable absorber. IET Optoelectronics, 12 (4). pp. 180-184. ISSN 1751-8768

Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Multi-Wavelength Q-Switched Ytterbium-Doped Fiber Laser with Multi-Walled Carbon Nanotubes. Fiber and Integrated Optics, 37 (2). pp. 92-102. ISSN 0146-8030

Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Latiff, Anas Abdul and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Nickel oxide nanoparticles thin film saturable absorber for 1-micron pulsed all-fibre lasers operation. Journal of Modern Optics, 65 (15). pp. 1801-1808. ISSN 0950-0340

Al-Masoodi, Ahmed Hasan Hamood and Alani, Ibrahim A.M. and Ahmed, Mahmoud Hazzaa M. and Al-Masoodi, Abtisam Hasan Hamood and Alani, Ahmed A. and Wang, Pengfei and Harun, Sulaiman Wadi (2018) Cobalt oxide nanocubes thin film as saturable absorber for generating Q-switched fiber lasers at 1 and 1.5 µm in ring cavity configuration. Optical Fiber Technology, 45. pp. 128-136. ISSN 1068-5200

Al-Saeedi, Salman and Sarhan, Ahmed Aly Diaa Mohammed and Bushroa, Abdul Razak (2018) Investigating the Tribological Characteristics of Burnished Polyoxymethylene—ANFIS and FE Modeling. Tribology Transactions, 61 (5). pp. 880-888. ISSN 1040-2004

Al-Samman, Ahmed Mohammed and Rahman, Tharek Abd and Hindia, Mhd Nour and Daho, Abdusalama and Hanafi, Effariza (2018) Path Loss Model for Outdoor Parking Environments at 28 GHz and 38 GHz for 5G Wireless Networks. Symmetry, 10 (12). p. 672. ISSN 2073-8994

Al-Samman, Ahmed Mohammed and Rahman, Tharek Abd and Hindia, Mhd Nour and Nasir, Jamal (2018) Path loss model for indoor emergency stairwell environment at millimeter wave band for 5G network. Turkish Journal of Electrical Engineering and Computer Sciences, 26 (6). pp. 3025-3033. ISSN 1300-0632

Alagirisamy, Mukil and Chow, Chee Onn (2018) An energy based cluster head selection unequal clustering algorithm with dual sink (ECH-DUAL) for continuous monitoring applications in wireless sensor networks. Cluster Computing, 21 (1). pp. 91-103. ISSN 1386-7857

Alam, Md Morshed and Mekhilef, Saad and Bassi, Hussain and Rawa, Muhyaddin (2018) Analysis of LC-LC2 Compensated Inductive Power Transfer for High Efficiency and Load Independent Voltage Gain. Energies, 11 (11). p. 2883. ISSN 1996-1073

Alam, Md Shariful and Jassim, Wissam A. and Zilany, Muhammad Shamsul Arefeen (2018) Radon transform of auditory neurograms: a robust feature set for phoneme classification. IET Signal Processing, 12 (3). pp. 260-268. ISSN 1751-9675

Alam, Md. Zahangir and Khan, Mohammad Jakir Hossain and Kabbashi, Nassereldeen A. and Sayem, S.M. Abu (2018) Development of an Effective Biosorbent by Fungal Immobilization Technique for Removal of Dyes. Waste and Biomass Valorization, 9 (4). pp. 681-690. ISSN 1877-2641

Alani, Ibrahim A.M. and Lokman, Muhammad Quisar and Ahmed, Mahmoud Hazzaa M. and Al-Masoodi, Ahmed Hasan Hamood and Latiff, Anas Abdul and Harun, Sulaiman Wadi (2018) A few-picosecond and high-peak-power passively mode-locked erbium-doped fibre laser based on zinc oxide polyvinyl alcohol film saturable absorber. Laser Physics, 28 (7). 075105. ISSN 1054-660X

Alawi, Omer A. and Sidik, Nor Azwadi Che and Xian, Hong Wei and Kean, Tung Hao and Kazi, Salim Newaz (2018) Thermal conductivity and viscosity models of metallic oxides nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1314-1325. ISSN 0017-9310

Ali, Bakhtiar and Sabri, Mohd Faizul Mohd and Said, Suhana Mohd and Sukiman, Nazatul Liana and Jauhari, Iswadi and Mahdavifard, Mohammad Hossein (2018) Microstructural and tensile properties of Fe and Bi added Sn-1Ag-0.5Cu solder alloy under high temperature environment. Microelectronics Reliability, 82. pp. 171-178. ISSN 0026-2714

Ali, Mohd Syukri and Bakar, Ab Halim Abu and Tan, Chia Kwang and Arof, Hamzah and Mokhlis, Hazlie (2018) High impedance fault detection and identification based on pattern recognition of phase displacement computation. IEEJ Transactions on Electrical and Electronic Engineering, 13 (4). pp. 549-560. ISSN 1931-4973

Ali, Mohd Zaharifudin Muhamad and Othman, Faridah (2018) Raingauge network optimization in a tropical urban area by coupling cross-validation with the geostatistical technique. Hydrological Sciences Journal, 63 (3). pp. 474-491. ISSN 0262-6667

Ali Bashir, Mohamed Bashir and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Miyazaki, Yuzuru and Shnawah, Dhafer Abdul Ameer and Shimada, Masanori and Elsheikh, Mohamed Hamid (2018) Enhancement of Thermoelectric Properties of Yb0.25Co4Sb12 Skutterudites through Ni Substitution. Sains Malaysiana, 47 (1). pp. 181-187. ISSN 0126-6039

Aljanabi, Qasim A. and Chik, Zamri and Allawi, Mohammed Falah and El-Shafie, Amr H. and Ahmed, Ali N. and El-Shafie, Ahmed (2018) Support vector regression-based model for prediction of behavior stone column parameters in soft clay under highway embankment. Neural Computing and Applications, 30 (8). pp. 2459-2469. ISSN 0941-0643

Aljumaily, Mustafa Mohammed and AlSaadi, Mohammed Abdulhakim and Das, Rasel and Hamid, Sharifah Bee Abd and Hashim, Nur Awanis and AlOmar, Mohamed Khalid and Alayan, Haiyam Mohammed and Novikov, Mikhail and Alsalhy, Qusay F. and Hashim, Mohd Ali (2018) Optimization of the Synthesis of Superhydrophobic Carbon Nanomaterials by Chemical Vapor Deposition. Scientific Reports, 8 (1). p. 2778. ISSN 2045-2322

Aljumaily, Mustafa Mohammed and AlSaadi, Mohammed Abdulhakim and Hashim, Nur Awanis and Alsalhy, Qusay F. and Mjalli, Farouq S. and Atieh, Muataz Ali and Al-Harrasi, Ahmed (2018) PVDF-co-HFP/superhydrophobic acetylene-based nanocarbon hybrid membrane for seawater desalination via DCMD. Chemical Engineering Research and Design, 138. pp. 248-259. ISSN 0263-8762

Allawi, Mohammed Falah and Jaafar, Othman and Ehteram, Mohammad and Mohamad Hamzah, Firdaus and El-Shafie, Ahmed (2018) Synchronizing Artificial Intelligence Models for Operating the Dam and Reservoir System. Water Resources Management, 32 (10). pp. 3373-3389. ISSN 0920-4741

Allawi, Mohammed Falah and Jaafar, Othman and Mohamad Hamzah, Firdaus and Ehteram, Mohammad and Hossain, Md. Shabbir and El-Shafie, Ahmed (2018) Operating a reservoir system based on the shark machine learning algorithm. Environmental Earth Sciences, 77 (10). p. 366. ISSN 1866-6280

Allawi, Mohammed Falah and Jaafar, Othman and Mohamad Hamzah, Firdaus and Mohd, Nuruol Syuhadaa and Deo, Ravinesh C. and El-Shafie, Ahmed (2018) Reservoir inflow forecasting with a modified coactive neuro-fuzzy inference system: a case study for a semi-arid region. Theoretical and Applied Climatology, 134 (1-2). pp. 545-563. ISSN 0177-798X

Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Abutaha, Fuad and Alqedra, Mamoun A. and Nayaka, Ramappa Ramesh (2018) Assessment on engineering properties and CO2 emissions of recycled aggregate concrete incorporating waste products as supplements to Portland cement. Journal of Cleaner Production, 203. pp. 822-835. ISSN 0959-6526

Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alsubari, Belal and Alqedra, Mamoun A. and Mo, Kim Hung (2018) Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials. Construction and Building Materials, 163. pp. 482-495. ISSN 0950-0618

Alnamer, Saddam Shueai and Mekhilef, Saad and Mokhlis, Hazlie (2018) A Four-Level T-Type Neutral Point Piloted Inverter for Solar Energy Applications. Energies, 11 (6). p. 1546. ISSN 1996-1073

Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Alnahhal, Mohammed Fouad and Jumaat, Mohd Zamin (2018) Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash. Construction and Building Materials, 158. pp. 742-754. ISSN 0950-0618

Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Jumaat, Mohd Zamin (2018) Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste. Construction and Building Materials, 167. pp. 44-54. ISSN 0950-0618

Ameen, Ameen Mohammed Salih and Ibrahim, Zainah and Othman, Faridah and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2018) Minimizing the Principle Stresses of Powerhoused Rock-Fill Dams Using Control Turbine Running Units: Application of Finite Element Method. Water, 10 (9). p. 1138. ISSN 2073-4441

Amin, Noor Farahain Muhammad and Othman, Faridah (2018) Generation of flood map using infoworks for Sungai Johor. International Journal of Integrated Engineering, 10 (2). pp. 142-145. ISSN 2229-838X

Amir, Zulhelmi and Mohd Saaid, Ismail and Mohamed Jan, Badrul (2018) An Optimization Study of Polyacrylamide-Polyethylenimine-Based Polymer Gel for High Temperature Reservoir Conformance Control. International Journal of Polymer Science, 2018. pp. 1-10. ISSN 1687-9422

Ammiche, Mustapha and Kouadri, Abdelmalek and Halabi, Laith M. and Guichi, Amar and Mekhilef, Saad (2018) Fault detection in a grid-connected photovoltaic system using adaptive thresholding method. Solar Energy, 174. pp. 762-769. ISSN 0038-092X

Ananthi, V.P. and Balasubramaniam, Pagavathi and Paramesran, Raveendran (2018) Impulse noise detection technique based on fuzzy set. IET Signal Processing, 12 (1). pp. 12-21. ISSN 1751-9675

Ananthi, V.P. and Balasubramaniam, Pagavathi and Paramesran, Raveendran (2018) A thresholding method based on interval-valued intuitionistic fuzzy sets: an application to image segmentation. Pattern Analysis and Applications, 21 (4). pp. 1039-1051. ISSN 1433-7541

Anisuzzaman, S.M. and Joseph, Collin Glen and Krishnaiah, Duduku and Daud, Wan Mohd Ashri Wan and Suali, Emma and Chee, F.C. (2018) Sorption potential of oil palm shell for the removal of chlorinated phenol from aqueous solution:Kinetic investigation. Journal of Engineering Science and Technology, 13 (2). pp. 489-504. ISSN 1823-4690

Ansari, Mozafar and Othman, Faridah and Abunama, Taher and El-Shafie, Ahmed (2018) Analysing the accuracy of machine learning techniques to develop an integrated influent time series model: case study of a sewage treatment plant, Malaysia. Environmental Science and Pollution Research, 25 (12). pp. 12139-12149. ISSN 0944-1344

Anwar, Ayaz and Minhaz, Aaliya and Khan, Naveed Ahmed and Kalantari, Katayoon and Afifi, Amalina Muhammad and Shah, Muhammad Raza (2018) Synthesis of gold nanoparticles stabilized by a pyrazinium thioacetate ligand: A new colorimetric nanosensor for detection of heavy metal Pd(II). Sensors and Actuators B: Chemical, 257. pp. 875-881. ISSN 0925-4005

Arafat, M.M. and Ong, Ji Yan and Haseeb, A.S. Md. Abdul (2018) Selectivity shifting behavior of Pd nanoparticles loaded zinc stannate/zinc oxide (Zn2SnO4/ZnO) nanowires sensors. Applied Surface Science, 435. pp. 928-936. ISSN 0169-4332

Arafat, Muhammad Yeasir and Khairuddin, Anis Salwa Mohd and Paramesran, Raveendran (2018) A Vehicular License Plate Recognition Framework For Skewed Images. KSII Transactions on Internet and Information Systems, 12 (11). pp. 5522-5540. ISSN 1976-7277

Arslan, Ahmed and Quazi, Moinuddin Mohammed and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Jamshaid, Muhammad and Mandalan, S.M. and Gohar, Ghulam Abbas and Gulzar, Mubashir and Alwi, Azham and Yarmand, Hooman and Mustafa, Maria S. (2018) Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express, 6 (3). 036414. ISSN 2053-1591

Asadi-Eydivand, Mitra and Solati-Hashjin, Mehran and Abu Osman, Noor Azuan (2018) Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication. Rapid Prototyping Journal, 24 (8). pp. 1392-1400. ISSN 1355-2546

Asadsangabifard, Mohammadjavad and Ismail, Zubaidah and Yusop, Zulkifli and Ong, Zhi Chao and Mohd, Nuruol Syuhadaa and Roushenas, Peiman and Tam, Jun Hui (2018) Temporal and spatial variation of grey water (sullage) properties from commercial and residential catchments. Desalination and Water Treatment, 132. pp. 188-196. ISSN 1944-3994

Asikin-Mijan, Nurul and Lee, Hwei Voon and Juan, Joon Ching and Abd Rahman, Noorsaadah and Ong, Hwai Chyuan and Razali, S.M. and Taufiq-Yap, Yun Hin (2018) Promoting deoxygenation of triglycerides via Co-Ca loaded SiO 2 -Al 2 O 3 catalyst. Applied Catalysis A: General, 552. pp. 38-48. ISSN 0926-860X

Aslam, Muhammad and Shafigh, Payam and Jumaat, Mohd Zamin (2018) Drying Shrinkage Strain of Palm-oil by-products Lightweight Concrete: A Comparison between Experimental and Prediction Models. KSCE Journal of Civil Engineering, 22 (12). pp. 4997-5008. ISSN 1226-7988

Auwal, S.T. and Ramesh, Singh and Yusof, Farazila and Manladan, Sunusi Marwana (2018) A review on laser beam welding of copper alloys. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 475-490. ISSN 0268-3768

Auwal, S.T. and Ramesh, Singh and Yusof, Farazila and Manladan, Sunusi Marwana (2018) A review on laser beam welding of titanium alloys. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 1071-1098. ISSN 0268-3768

Awais, Muhammad and Ramiah, Harikrishnan and Lim, Chee Cheow and Chuah, Joon Huang (2018) A 0.079 mm2 2.1-to-4.2 GHz ring-VCO employing programmable current topology. Microelectronics International, 35 (2). pp. 85-91. ISSN 1356-5362

Azeem, - and Badruddin, I.A. and Nik-Ghazali, Nik Nazri and Idris, Mohd Yamani Idna and Anqi, Ali E. and Ahmed, Salman N.J. and Kamangar, Sarfaraz and Al-Rashed, Abdullah A.A.A. (2018) Effect of size and location of solid on conjugate heat transfer in porous cavity. Indian Journal of Pure and Applied Physics, 56 (10). pp. 792-801. ISSN 0019-5596

Aziz, Fayeem and Arof, Hamzah and Mokhtar, Norrima and Shah, Noraisyah Mohamed and Khairuddin, Anis Salwa Mohd and Hanafi, Effariza and Abu Talip, Mohamad Sofian (2018) Waste level detection and HMM based collection scheduling of multiple bins. PLoS ONE, 13 (8). e0202092. ISSN 1932-6203

Azizi, Nurul Sakina Mokhtar and Wilkinson, Suzanne and Din, Moktar Aziz Mohd and Salim, Nuzaihan Aras Agus (2018) An analysis of occupants response to thermal discomfort in green and conventional buildings in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 159-171. ISSN 2289-7879

Azmi, N.M. and Yusof, Nur Hotimah and Jusoh, Zulzilawati and Razak, Hashim Abdul and Harun, Sulaiman Wadi (2018) Robust strain sensor based on multimode interference in single-mode–multimode–single-mode fiber structure. Optoelectronics and Advanced Materials, Rapid Communications, 12 (5-6). pp. 272-274. ISSN 1842-6573

Azwar, Elfina and Wan Mahari, Wan Adibah and Chuah, Joon Huang and Vo, Dai-Viet N. and Ma, Nyuk Ling and Lam, Wei Haur and Lam, Su Shiung (2018) Transformation of biomass into carbon nanofiber for supercapacitor application – A review. International Journal of Hydrogen Energy, 43 (45). pp. 20811-20821. ISSN 0360-3199

B

Babamohammadi, Shervan and Shamiri, Ahmad and Nejad Ghaffar Borhani, Tohid and Shafeeyan, Mohammad Saleh and Aroua, Mohamed Kheireddine and Yusoff, Rozita (2018) Solubility of CO 2 in aqueous solutions of glycerol and monoethanolamine. Journal of Molecular Liquids, 249. pp. 40-52. ISSN 0167-7322

Babar, Ibrahim M. and Ahmed, Mahmoud Hazzaa M. and Harun, Sulaiman Wadi and Yasin, Moh (2018) Mode-locked erbium-doped fiber laser employing cobalt doped zinc oxide saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 105-113. ISSN 1543-0537

Babar, M. and Harun, Sulaiman Wadi and Yasin, Moh (2018) Q-switched cladding pumped erbium-ytterbium co-doped fiber laser with molybdenum disulfide saturable absorber. Nonlinear Optics, Quantum Optics, 49 (3-4). pp. 277-283. ISSN 1543-0537

Badiuzaman, Wan Nur Izzati Wan and Sayuti, Mohd and Derahman, Nur Aqilah and Amran, Nor Amirah Mohd and Isa, M.A. Mohd (2018) Analysation of performances of CNC high speed milling machine using multi-walled carbon nanotubes as additives in cutting fluid. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 494-499. ISSN 0933-5137

Badran, Ola and Mokhlis, Hazlie and Mekhilef, Saad and Dahalan, Wardiah Mohd (2018) Multi-Objective Network Reconfiguration with Optimal DG Output Using Meta-Heuristic Search Algorithms. Arabian Journal for Science and Engineering, 43 (6). pp. 2673-2686. ISSN 2193-567X

Badran, Ola and Mokhlis, Hazlie and Mekhilef, Saad and Dahalan, Wardiah Mohd and Jallad, Jafar (2018) Minimum switching losses for solving distribution NR problem with distributed generation. IET Generation, Transmission & Distribution, 12 (8). pp. 1790-1801. ISSN 1751-8687

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Asma Abubakar, Tuty and Yusof, Farazila and Umeda, Junko and Saud, Safaa N. and Ibrahim, Mustafa K. (2018) Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy. Transactions of Nonferrous Metals Society of China, 28 (3). pp. 502-514. ISSN 1003-6326

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Tsutsumi, Seiichiro and Umeda, Junko and Abu Bakar, Tuty Asma and Yusof, Farazila (2018) Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti–Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering. Materials transactions, 59 (5). pp. 835-842. ISSN 1347-5320

Baharuddin, Aainaa Aqilah and Ang, Bee Chin and Abu Hussein, Nurul Athirah and Andriyana, Andri and Wong, Yew Hoong (2018) Mechanisms of highly stabilized ex-situ oleic acid-modified iron oxide nanoparticles functionalized with 4-pentynoic acid. Materials Chemistry and Physics, 203. pp. 212-222. ISSN 0254-0584

Bahri, Syamsul and Mahmud, Hilmi and Shafigh, Payam (2018) Effect of utilizing unground and ground normal and black rice husk ash on the mechanical and durability properties of high-strength concrete. Sadhana, 43 (2). p. 22. ISSN 0256-2499

Baradaran, Saeid and Nasiri-Tabrizi, Bahman and Seyed Shirazi, Seyed Farid and Saber-Samandari, Saeed and Shahtalebi, S. and Basirun, Wan Jefrey (2018) Wet chemistry approach to the preparation of tantalum-doped hydroxyapatite: Dopant content effects. Ceramics International, 44 (3). pp. 2768-2781. ISSN 0272-8842

Bashir, Mohamed Bashir Ali and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Miyazaki, Yuzuru and Shnawah, Dhafer Abdulameer and Shimada, Masanori and Salleh, Faiz and Mahmood, Mohamad Syafie and Salih, Ethar Yahya and Fitriani, Fitriani and Elsheikh, Mohamed Hamid (2018) In-Filled La0.5Co4Sb12 Skutterudite System with High Thermoelectric Figure of Merit. Journal of Electronic Materials, 47 (4). pp. 2429-2438. ISSN 0361-5235

Bashir, Muhammad Nasir and Haseeb, A.S. Md. Abdul (2018) Improving mechanical and electrical properties of Cu/SAC305/Cu solder joints under electromigration by using Ni nanoparticles doped flux. Journal of Materials Science: Materials in Electronics, 29 (4). pp. 3182-3188. ISSN 0957-4522

Basri, Hazrul Mohamed and Mekhilef, Saad (2018) Experimental evaluation of model predictive current control for a modified three-level four-leg indirect matrix converter. IET Electric Power Applications, 12 (1). pp. 114-123. ISSN 1751-8660

Basso, Alessio and Hamad, F.A. and Ganesan, Poo Balan (2018) Effects of the geometrical configuration of air–water mixer on the size and distribution of microbubbles in aeration systems. Asia-Pacific Journal of Chemical Engineering, 13 (6). e2259. ISSN 1932-2135

Bazri, Shahab and Badruddin, Irfan Anjum and Naghavi, Mohammad Sajad and Bahiraei, Mehdi (2018) A review of numerical studies on solar collectors integrated with latent heat storage systems employing fins or nanoparticles. Renewable Energy, 118. pp. 761-778. ISSN 0960-1481

Behroyan, Iman and Ganesan, Poo Balan and He, Shuisheng and Sivasankaran, Sivanandam (2018) CFD models comparative study on nanofluids subcooled flow boiling in a vertical pipe. Numerical Heat Transfer, Part A: Applications, 73 (1). pp. 55-74. ISSN 1040-7782

Benlahbib, Boualam and Bouarroudj, Noureddine and Mekhilef, Saad and Abdelkrim, Tameur and Lakhdari, Abdelkader and Bouchafaa, Farid (2018) A Fuzzy Logic Controller Based on Maximum Power Point Tracking Algorithm for Partially Shaded PV Array-Experimental Validation. Elektronika ir Elektrotechnika, 24 (4). pp. 38-44. ISSN 1392-1215

Berahim, Nurafaliana and Basirun, Wan Jefrey and Leo, Bey Fen and Johan, Mohd Rafie (2018) Synthesis of Bimetallic Gold-Silver (Au-Ag) Nanoparticles for the Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol. Catalysts, 8 (10). p. 412. ISSN 2073-4344

Boutasseta, Nadir and Ramdani, Messaoud and Mekhilef, Saad (2018) Fault-tolerant power extraction strategy for photovoltaic energy systems. Solar Energy, 169. pp. 594-606. ISSN 0038-092X

C

Celeste, Alcigeimes Batista and El-Shafie, Ahmed (2018) Assessment of Stochastic Operation Optimization for Reservoirs of Contrasting Scales. Water Resources Management, 32 (11). pp. 3751-3763. ISSN 0920-4741

Chan, X.H. and Khanmirzaei, Mohammad Hassan and Omar, Fatin Saiha and Ramesh, Kasi and Ramesh, Subramaniam and Ramesh, S. (2018) Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte. Ionics, 24 (4). pp. 1221-1226. ISSN 0947-7047

Chandra, Devi and Purbolaksono, Judha and Yusoff, Nukman (2018) Surface crack growth in a solid cylinder under combined cyclic bending-torsion loading. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 1033-1041. ISSN 1819-6608

Chew, Chun Ming and Aroua, Mohamed Kheireddine and Hussain, Mohd Azlan (2018) Advanced process control for ultrafiltration membrane water treatment system. Journal of Cleaner Production, 179. pp. 63-80. ISSN 0959-6526

Chew, Kit Wayne and Chia, Shir Reen and Show, Pau Loke and Ling, Tau Chuan and Arya, Shalini S. and Chang, Jo-Shu (2018) Food waste compost as an organic nutrient source for the cultivation of Chlorella vulgaris. Bioresource Technology, 267. pp. 356-362. ISSN 0960-8524

Chew, Kit Wayne and Chia, Shir Reen and Yap, Yee Jiun and Ling, Tau Chuan and Tao, Yang and Show, Pau Loke (2018) Densification of food waste compost: Effects of moisture content and dairy powder waste additives on pellet quality. Process Safety and Environmental Protection, 116. pp. 780-786. ISSN 0957-5820

Chew, S.P. and Zulkifli, A.Z. and Hamad, H. and Harun, Sulaiman Wadi and Lee, L.Y. and Razak, H.A. and Adikan, Faisal Rafiq Mahamd (2018) Singlemode-multimode-singlemode fiber structure as compressive strain sensor on a reinforced concrete beam. Optik, 154. pp. 705-710. ISSN 0030-4026

Chia, Shir Reen and Ong, Hwai Chyuan and Chew, Kit Wayne and Show, Pau Loke and Phang, Siew Moi and Ling, Tau Chuan and Nagarajan, Dillirani and Lee, Duu-Jong and Chang, Jo-Shu (2018) Sustainable approaches for algae utilisation in bioenergy production. Renewable Energy, 129. pp. 838-852. ISSN 0960-1481

Chia, Shir Reen and Show, Pau Loke and Phang, Siew Moi and Ling, Tau Chuan and Ong, Hwai Chyuan (2018) Sustainable approach in phlorotannin recovery from macroalgae. Journal of Bioscience and Bioengineering, 126 (2). pp. 220-225. ISSN 1389-1723

Chin, Ren Jie and Lai, Sai Hin and Chang, Kian Boon and Jaafar, Wan Zurina Wan and Othman, Faridah (2018) Statistical Analysis Towards Improvement of Design Rainfall: Case Study of Peninsular Malaysia. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 42 (2). pp. 121-131. ISSN 2228-6160

Chin, Ren Jie and Lai, Sai Hin and Ibrahim, Shaliza and Jaafar, Wan Zurina Wan (2018) Factors affect wall slip: Particle size, concentration, and temperature. Applied Rheology, 28 (1). p. 15775. ISSN 1430-6395

Chong, Gabriel and Ramiah, Harikrishnan and Yin, Jun and Rajendran, Jagadheswaran and Wong, Wei Ru and Mak, Pui-In and Martins, Rui P. (2018) Ambient RF energy harvesting system: a review on integrated circuit design. Analog Integrated Circuits and Signal Processing, 97 (3). pp. 515-531. ISSN 0925-1030

Chong, Wen Tong and Muzammil, Wan Khairul and Wong, Kok Hoe and Bernard Saw, Lip Huat and Chu, Yung Jeh and Wang, Xiao Hang and Wang, Chin Tsan (2018) Design, development and testing of a novel power augmented cross-axis-wind-turbine. In: 17th International Conference on Sustainable Energy Technologies (SET 2018), 21-23 August 2018, Hong Shan Hotel, Wuhan, China.

Chong, Wen Tong and Wong, K.H. and Chu, Y.J. and Wang, X.H. and Kong, K.K. and Kong, K.H. (2018) Innovative cross-axis-wind-turbine design. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Chong, Wen Tong and Wong, K.H. and Kong, K.K. and Tan, W.Y. and Xianbao, X. (2018) Conceptual design of a novel power-augmented hydrokinetic run-of- river turbine. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Chong, Wen Tong and Wong, K.H. and Xiang, X. and Kong, Keen Kuan and Tan, W.Y. (2018) Conceptual design of a novel power-augmented marine current turbine. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Chong, Yeh Sai and Mokhtar, Norrima and Arof, Hamzah and Cumming, Paul and Iwahashi, Masahiro (2018) Automated Classification and Removal of EEG Artifacts With SVM and Wavelet-ICA. IEEE Journal of Biomedical and Health Informatics, 22 (3). pp. 664-670. ISSN 2168-2194

Choong, C.E. and Ibrahim, S. and Yoon, Y. and Jang, M. (2018) Removal of lead and bisphenol A using magnesium silicate impregnated palm-shell waste powdered activated carbon: Comparative studies on single and binary pollutant adsorption. Ecotoxicology and Environmental Safety, 148. pp. 142-151. ISSN 0147-6513

Choong, Choe Earn and Lee, Gooyong and Jang, Min and Park, Chang Min and Ibrahim, Shaliza (2018) One Step Hydrothermal Synthesis of Magnesium Silicate Impregnated Palm Shell Waste Activated Carbon for Copper Ion Removal. Metals, 8 (10). p. 741. ISSN 2075-4701

Chowdhury, Md Sadek Uddin and Othman, Faridah and Wan Jaafar, Wan Zurina and Mood, Nuzaima Che and Adham, Md Ibrahim (2018) Assessment of Pollution and Improvement Measure of Water Quality Parameters using Scenarios Modeling for Sungai Selangor Basin. Sains Malaysiana, 47 (3). pp. 457-469. ISSN 0126-6039

Chowdhury, Zaira Zaman and Krishnan, Bagavathi and Sagadevan, Suresh and Rafique, Rahman Faizur and Hamizi, Nor Aliya and Wahab, Yasmin Abdul and Khan, Ali Akbar and Johan, Mohd Rafie and Al-Douri, Yarub and Kazi, Salim Newaz and Shah, Syed Tawab (2018) Effect of Temperature on the Physical, Electro-Chemical and Adsorption Properties of Carbon Micro-Spheres Using Hydrothermal Carbonization Process. Nanomaterials, 8 (8). p. 597. ISSN 2079-4991

Chu, Yung Jeh and Chong, Wen Tong (2018) Numerical Study of Conventional and Biomimetic Marine Current Turbines in Tandem by Using Openfoam®. Journal of Mechanics, 34 (5). pp. 679-693. ISSN 1727-7191

D

Dabbak, Sameh Ziad Ahmad and Illias, Hazlee Azil and Ang, Bee Chin and Latiff, Nurul Ain Abdul and Makmud, Mohamad Zul Hilmey (2018) Electrical Properties of Polyethylene/Polypropylene Compounds for High-Voltage Insulation. Energies, 11 (6). p. 1448. ISSN 1996-1073

Dambatta, Yusuf S. and Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, Mohd (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3959-3976. ISSN 0268-3768

Davoody, Meysam and Abdul Raman, Abdul Aziz and Asgharzadeh Ahmadi, Seyed Ali and Ibrahim, Shaliza and Parthasarathy, Rajarathinam (2018) Determination of volumetric mass transfer coefficient in gas-solid-liquid stirred vessels handling high solids concentrations: Experiment and modeling. Iranian Journal of Chemistry and Chemical Engineering, 37 (3). pp. 195-212. ISSN 1021-9986

Delsouz Khaki, Mohammad Reza and Shafeeyan, Mohammad Saleh and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2018) Enhanced UV–Visible photocatalytic activity of Cu-doped ZnO/TiO2 nanoparticles. Journal of Materials Science: Materials in Electronics, 29 (7). pp. 5480-5495. ISSN 0957-4522

Delsouz Khaki, Mohammad Reza and Shafeeyan, Mohammad Saleh and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2018) Evaluating the efficiency of nano-sized Cu doped TiO2/ZnO photocatalyst under visible light irradiation. Journal of Molecular Liquids, 258. pp. 354-365. ISSN 0167-7322

Derahman, Nur Aqilah and Sayuti, Mohd and Yusof, Farazila and Dambatta, Yusuf Suleiman and Amran, Nor Amirah Mohd and Badiuzaman, Wan Nur Izzati Wan (2018) Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting. Journal of Testing and Evaluation, 46 (4). p. 20170140. ISSN 0090-3973

Diop, Lamine and Bodian, Ansoumana and Djaman, Koffi and Yaseen, Zaher Mundher and Deo, Ravinesh C. and El-Shafie, Ahmed and Brown, Larry C. (2018) The influence of climatic inputs on stream-flow pattern forecasting: case study of Upper Senegal River. Environmental Earth Sciences, 77 (5). p. 182. ISSN 1866-6280

Doufesh, Hazem and Ibrahim, Fatimah and Ismail, Noor Azina and Wan Ahmad, Wan Azman (2018) Application of self organizing map for correlation hunting between alpha band power of EEG signals and other physiological parameters during Muslim prayer (salat). Biomedical Engineering: Applications, Basis and Communications, 30 (04). p. 1850029. ISSN 1016-2372

Dzulkifli, Muhammad Afiq and Hamzaid, Nur Azah and Davis, Glen Macartney and Hasnan, Nazirah (2018) Neural Network-Based Muscle Torque Estimation Using Mechanomyography During Electrically-Evoked Knee Extension and Standing in Spinal Cord Injury. Frontiers in Neurorobotics, 12. ISSN 1662-5218

E

Ehteram, Mohammad and Mousavi, Sayed Farhad and Karami, Hojat and Farzin, Saeed and Singh, Vijay P. and Chau, Kwok-wing and El-Shafie, Ahmed (2018) Reservoir operation based on evolutionary algorithms and multi-criteria decision-making under climate change and uncertainty. Journal of Hydroinformatics, 20 (2). pp. 332-355. ISSN 1464-7141

Ehteram, Mohammad and Othman, Faridah and Yaseen, Zaher Mundher and Afan, Haitham Abdulmohsin and Allawi, Mohammed Falah and Malek, Marlinda Abdul and Ahmed, Ali Najah and Shahid, Shamsuddin and Singh, Vijay P. and El-Shafie, Ahmed (2018) Improving the Muskingum flood routing method using a hybrid of particle swarm optimization and bat algorithm. Water, 10 (6). p. 807. ISSN 2073-4441

Ehteram, Mohammad and P. Singh, Vijay and Karami, Hojat and Hosseini, Khosrow and Dianatikhah, Mojgan and Hossain, Md. and Ming Fai, Chow and El-Shafie, Ahmed (2018) Irrigation Management Based on Reservoir Operation with an Improved Weed Algorithm. Water, 10 (9). p. 1267. ISSN 2073-4441

Elias, Mohamad Fathi Mohamad and Saidur, Rahman and Ben-Mansour, Rached and Hepbasli, Arif and Rahim, Nasrudin Abd and Jesbains, Kaur (2018) Heat transfer and pressure drop characteristics of a plate heat exchanger using water based Al2O3 nanofluid for 30° and 60° chevron angles. Heat and Mass Transfer, 54 (10). pp. 2907-2916. ISSN 0947-7411

Ethteram, Mohammad and Mousavi, Sayed-Farhad and Karami, Hojat and Farzin, Saeed and Deo, Ravinesh and Othman, Faridah Binti and Chau, Kwok-wing and Sarkamaryan, Saeed and Singh, Vijay P. and El-Shafie, Ahmed (2018) Bat algorithm for dam–reservoir operation. Environmental Earth Sciences, 77 (13). p. 510. ISSN 1866-6280

Eyada Ibrahim, Abdulrahman and Jameel, Mohammed (2018) Wind Induced Response of Spar-mooring-riser System. KSCE Journal of Civil Engineering, 22 (8). pp. 2653-2663. ISSN 1226-7988

F

Faisal, Amir and Ng, Siew Cheok and Goh, Siew Li and Lai, Khin Wee (2018) Knee cartilage segmentation and thickness computation from ultrasound images. Medical & Biological Engineering & Computing, 56 (4). pp. 657-669. ISSN 0140-0118

Farzin, Saeed and Singh, Vijay and Karami, Hojat and Farahani, Nazanin and Ehteram, Mohammad and Kisi, Ozgur and Allawi, Mohammed Falah and Mohd, Nuruol Syuhadaa and El-Shafie, Ahmed (2018) Flood Routing in River Reaches Using a Three-Parameter Muskingum Model Coupled with an Improved Bat Algorithm. Water, 10 (9). p. 1130. ISSN 2073-4441

Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed (2018) Sustainability of additive-doped biodiesel: Analysis of its aggressiveness toward metal corrosion. Journal of Cleaner Production, 181. pp. 508-516. ISSN 0959-6526

Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed and Al-Zahrani, A. (2018) Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability. Journal of Cleaner Production, 171. pp. 1407-1414. ISSN 0959-6526

Fitriani, Fitriani and Said, Suhana Mohd and Rozali, Shaifulazuar and Salleh, Faiz and Sabri, Mohd Faizul Mohd and Bui, Duc Long and Nakayama, Tadachika and Raihan, Ovik and Megat Hasnan, Megat Muhammad Ikhsan and Bashir, Mohamed Bashir Ali and Kamal, Farhan (2018) Enhancement of Thermoelectric Properties in Cold Pressed Nickel Doped Bismuth Sulfide Compounds. Electronic Materials Letters, 14 (6). pp. 689-699. ISSN 1738-8090

Fiyadh, Seef Saadi and AlSaadi, Mohammed Abdulhakim and AlOmar, Mohamed Khalid and Fayaed, Sabah Saadi and El-Shafie, Ahmed (2018) Arsenic removal from water using N,N-diethylethanolammonium chloride based DES-functionalized CNTs: (NARX) neural network approach. Journal of Water Supply: Research and Technology-Aqua, 67 (6). pp. 531-542. ISSN 0003-7214

Fiyadh, Seef Saadi and AlSaadi, Mohammed Abdulhakim and AlOmar, Mohamed Khalid and Fayaed, Sabah Saadi and Mjalli, Farouq Sabri and El-Shafie, Ahmed (2018) BTPC-Based DES-Functionalized CNTs for As3+ Removal from Water: NARX Neural Network Approach. Journal of Environmental Engineering, 144 (8). 04018070. ISSN 0733-9372

G

Gachhadar, Anand and Hindia, Mhd Nour and Qamar, Faizan and Siddiqui, M. Hassam Shakil and Noordin, Kamarul Ariffin and Amiri, Iraj Sadegh (2018) Modified genetic algorithm based power allocation scheme for amplify-and-forward cooperative relay network. Computers & Electrical Engineering, 69. pp. 628-641. ISSN 0045-7906

Gan, Yong Yang and Ong, Hwai Chyuan and Ling, Tau Chuan and Zulkifli, Nurin Wahidah Mohd and Wang, Chin-Tsan and Yang, Yung-Chin (2018) Thermal conductivity optimization and entropy generation analysis of titanium dioxide nanofluid in evacuated tube solar collector. Applied Thermal Engineering, 145. pp. 155-164. ISSN 1359-4311

Ghaedi, Khaled and Hejazi, Farzad and Ibrahim, Zainah and Khanzaei, Parveen (2018) Flexible Foundation Effect on Seismic Analysis of Roller Compacted Concrete (RCC) Dams Using Finite Element Method. KSCE Journal of Civil Engineering, 22 (4). pp. 1275-1287. ISSN 1226-7988

Ghaedi, Khaled and Ibrahim, Zainah and Jameel, Mohammed and Javanmardi, Ahad and Khatibi, Hamed (2018) Seismic Response Analysis of Fully Base-Isolated Adjacent Buildings with Segregated Foundations. Advances in Civil Engineering, 2018. pp. 1-21. ISSN 1687-8086

Gharehkhani, Samira and Seyed Shirazi, Seyed Farid and Yarmand, Hooman and Montazer, Elham and Kazi, Salim Newaz and Ibrahim, Rushdan and Ashjaei, Mehdi and Zulkifli, Nurin Wahidah Mohd and Rahmati, Sadegh (2018) The effect of nanocrystalline cellulose on flow properties of fiber crop aqueous suspension. Carbohydrate Polymers, 184. pp. 376-382. ISSN 0144-8617

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Aoyama, Hideki and Tontowi, Alva Edy and Ghazilla, Raja Ariffin Raja (2018) Green Product Preferences with Respect to Cultural Influences: Empirical Study in Indonesia. International Journal of Automation Technology, 12 (6). pp. 842-852. ISSN 1881-7629

Ghazali, Mohd Fazli and Razak, Nasrul Anuar Abd and Abu Osman, Noor Azuan and Gholizadeh, Hossein (2018) Awareness, potential factors, and post-amputation care of stump flexion contractures among transtibial amputees. Turkish Journal of Physical Medicine and Rehabilitation, 64 (3). pp. 268-276. ISSN 2587-0823

Ghouli, S. and Ayatollahi, Majid Reza and Bushroa, Abdul Razak (2018) Fracture characterization of ceria partially stabilized zirconia using the GMTSN criterion. Engineering Fracture Mechanics, 199. pp. 647-657. ISSN 0013-7944

Goh, Kian Wei and Johan, Mohd Rafie and Wong, Yew Hoong (2018) Enhanced structural properties of In2O3 nanoparticles at lower calcination temperature synthesised by co-precipitation method. Micro & Nano Letters, 13 (2). pp. 270-275. ISSN 1750-0443

Goh, Yingxin and Goh, Yi Sing and Lee, Ee Lynn and Ong, Meng Teck and Haseeb, A.S. Md. Abdul (2018) Formation and characterization of intermetallic compounds in electroplated cobalt–tin multilayers. Journal of Materials Science: Materials in Electronics, 29 (7). pp. 5791-5798. ISSN 0957-4522

Gordan, Meisam and Razak, Hashim Abdul and Ismail, Zubaidah and Ghaedi, Khaled (2018) Data mining based damage identification using imperialist competitive algorithm and artificial neural network. Latin American Journal of Solids and Structures, 15 (8). e107. ISSN 1679-7817

Guichi, Amar and Talha, Abdelaziz and Berkouk, El Madjid and Mekhilef, Saad (2018) Energy management and performance evaluation of grid connected PV-battery hybrid system with inherent control scheme. Sustainable Cities and Society, 41. pp. 490-504. ISSN 2210-6707

Guichi, Amar and Talha, Abdelaziz and Berkouk, El Madjid and Mekhilef, Saad and Gassab, Samir (2018) A new method for intermediate power point tracking for PV generator under partially shaded conditions in hybrid system. Solar Energy, 170. pp. 974-987. ISSN 0038-092X

Gulzar, Mubashir and Mahmood, Khalid and Zahid, Rehan and Alabdulkarem, Abdullah and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Ahmad, Pervaiz and Malik, Muhammad Sajjad Sabir (2018) The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 987-998. ISSN 1350-6501

Gururajapathy, Sophi Shilpa and Mokhlis, Hazlie and Illias, Hazlee Azil (2018) Classification and regression analysis using support vector machine for classifying and locating faults in a distribution system. Turkish Journal of Electrical Engineering and Computer Sciences, 26 (6). pp. 3044-3056. ISSN 1300-0632

H

Habib, Ibtesam Abudallah and Mohtar, Wan Hanna Melini Wan and Elsaiad, Atef and El-Shafie, Ahmed (2018) Nose-Angle Bridge Piers as Alternative Countermeasures for Local Scour Reduction. The Baltic Journal of Road and Bridge Engineering, 13 (2). pp. 110-120. ISSN 1822-427X

Habib, Madiha and Lee, Kuan Ming and Liew, Yih Miin and Zakian, Christian and Ung, Ngie Min and Chew, Hooi Pin (2018) Assessing surface characteristics of eroded dentine with optical coherence tomography: a preliminary in vitro validation study. Applied Optics, 57 (29). pp. 8673-8679. ISSN 1559-128X

Habiba, Umma and Siddique, Tawsif A. and Lee, Jacky Jia Li and Tan, Chin Joo and Ang, Bee Chin and Afifi, Amalina Muhammad (2018) Adsorption study of methyl orange by chitosan/polyvinyl alcohol/zeolite electrospun composite nanofibrous membrane. Carbohydrate Polymers, 191. pp. 79-85. ISSN 0144-8617

Haddad, Omid and Ramli Sulong, Nor Hafizah and Ibrahim, Zainah (2018) Cyclic performance of stiffened steel plate shear walls with various configurations of stiffeners. Journal of Vibroengineering, 20 (1). pp. 459-476. ISSN 1392-8716

Halabi, Laith M. and Mekhilef, Saad (2018) Flexible hybrid renewable energy system design for a typical remote village located in tropical climate. Journal of Cleaner Production, 177. pp. 908-924. ISSN 0959-6526

Halabi, Laith M. and Mekhilef, Saad and Hossain, Monowar (2018) Performance evaluation of hybrid adaptive neuro-fuzzy inference system models for predicting monthly global solar radiation. Applied Energy, 213. pp. 247-261. ISSN 0306-2619

Hamdan, Puteri N.F. and Hamzaid, Nur Azah and Usman, Juliana and Islam, Md Anamul and Kean, Victor Shern Phng and Wahab, Ahmad Khairi Abdul and Hasnan, Nazirah and Davis, Glen Macartney (2018) Variations of ankle-foot orthosis-constrained movements increase ankle range of movement while maintaining power output of recumbent cycling. Biomedical Engineering / Biomedizinische Technik, 63 (6). pp. 691-697. ISSN 0013-5585

Hamim, Asmah and Yusoff, Nur Izzi Md and Ceylan, Halil and Rosyidi, Sri Atmaja P. and El-Shafie, Ahmed (2018) Comparative study on using static and dynamic finite element models to develop FWD measurement on flexible pavement structures. Construction and Building Materials, 176. pp. 583-592. ISSN 0950-0618

Hanif, Muhammad Usman and Ibrahim, Zainah and Lim, Huan Xin and Hang, You Xian (2018) Effect of incremental static damage on modal frequencies of reinforced concrete beams. International Journal of Integrated Engineering, 10 (2). pp. 105-111. ISSN 2229-838X

Haris, Hazlihan and Arof, Hamzah and Harun, Sulaiman Wadi and Apsari, Retna (2018) Passive mode-locking of ytterbium-doped fiber laser using chemically exfoliated graphene as saturable absorber. Nonlinear Optics, Quantum Optics, 49 (3-4). pp. 267-275. ISSN 1543-0537

Harizam, M.Z. and Tamrin, Khairul Fikri and Nukman, Yusoff and Yusof, Farazila and Sheikh, Nadeem Ahmed (2018) Effect of process parameters on the laser joining of stainless steel with three-dimensional (3-D) printed polymer sheet. Lasers in Engineering, 41 (4-6). pp. 393-408. ISSN 0898-1507

Harun, Sulaiman Wadi and Nawi, B.M. and Latiff, Anas Abdul (2018) Nickel oxide film saturable absorber for mode-locking operation at 1.55-micron region. Journal of Nonlinear Optical Physics & Materials, 27 (02). p. 1850020. ISSN 0218-8635

Hasan, Md Rakibul and Pulingam, Thiruchelvi and Appaturi, Jimmy Nelson and Zifruddin, Anis Nadyra and Teh, Swe Jyan and Lim, Teck Wei and Ibrahim, Fatimah and Leo, Bey Fen and Thong, Kwai Lin (2018) Carbon nanotube-based aptasensor for sensitive electrochemical detection of whole-cell Salmonella. Analytical Biochemistry, 554. pp. 34-43. ISSN 0003-2697

Hasan, Syed Waqar and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Jaffery, Hasan Abbas and Shuhaimi, Ahmad (2018) Thermally Resistive Electrospun Composite Membranes for Low-Grade Thermal Energy Harvesting. Macromolecular Materials and Engineering, 303 (3). p. 1700482. ISSN 1438-7492

Hasan, Syed Waqar and Said, Suhana Mohd and Shuhaimi, Ahmad and Jaffery, Hasan Abbas and Sabri, Mohd Faizul Mohd (2018) The role of electrolyte fluidity on the power generation characteristics of thermally driven electrochemical cells. Sains Malaysiana, 47 (2). pp. 403-408. ISSN 0126-6039

Haseeb, A.S. Md. Abdul and Rahman, Abu Zayed Mohammad Saliqur and Chia, Pay Ying (2018) Nanoindentation creep on Cu3Sn, Cu6Sn5 and (Cu, Ni)6Sn5 intermetallic compounds grown in electrodeposited multilayered thin film. Journal of Materials Science: Materials in Electronics, 29 (2). pp. 1258-1263. ISSN 0957-4522

Hashemi, Mohammad and Shafigh, Payam and Karim, Mohamed Rehan and Atis, Cengiz Duran (2018) The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement. Construction and Building Materials, 169. pp. 553-566. ISSN 0950-0618

Hashemi, Sajedeh Sadat Ghazizadeh and Mahmud, Hilmi and Djobo, Jean Noel Yankwa and Tan, Chee Ghuan and Ang, Bee Chin and Ranjbar, Navid (2018) Microstructural characterization and mechanical properties of bottom ash mortar. Journal of Cleaner Production, 170. pp. 797-804. ISSN 0959-6526

Hashim, Ameerul Hazeeq and Zayed, Ala' Omar Hasan and Zain, Sharifuddin Md and Lee, Vannajan Sanghiran and Said, Suhana Mohd (2018) Electronic, magnetic and structural properties of Co3O4 (100) surface: a DFT+U study. Applied Surface Science, 427. pp. 1090-1095. ISSN 0169-4332

Hasnan, Megat Muhammad Ikhsan and Abdullah, Norbani and Said, Suhana Mohd and Salleh, Faiz and Hussin, S.A. Mat and Shah, Noraisyah Mohamed (2018) Thermo-electrochemical generation capabilities of octahedral spin crossover complexes of Mn(II), Fe(II) and Co(II) with N-donor ligands and benzoate counter ion. Electrochimica Acta, 261. pp. 330-339. ISSN 0013-4686

Hasnan, Nazirah and Saadon, Nurul Salwani Mohamad and Hamzaid, Nur Azah and Teoh, Mira Xiao Hui and Ahmadi, Sirous and Davis, Glen Macartney (2018) Muscle oxygenation during hybrid arm and functional electrical stimulation–evoked leg cycling after spinal cord injury. Medicine, 97 (43). e12922. ISSN 0025-7974

Hasni, K. and Nabi, A. and Varman, Mahendra and Ilham, Zul (2018) Preparation of Biodiesel from Hibiscus sabdariffa Seeds Oil using Calcium Oxide Catalyst from Waste Egg Shells. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 177-183. ISSN 2600-8092

Hassan, Mohd Fikree and Paramesran, Raveendran and Tanaka, Yoshiki and Tanaka, Kiyoshi (2018) A method using uniform yellowing pigmentation to model the color perception of the elderly people. Signal, Image and Video Processing, 12 (6). pp. 1019-1026. ISSN 1863-1703

Heydarzadeh, Mohammad S. and Rezaei, Seyed Mehdi and Mardi, Noor Azizi and Kamali E., Ali (2018) Compensation of friction and force ripples in the estimation of cutting forces by neural networks. Measurement, 114. pp. 354-364. ISSN 0263-2241

Heydarzadeh, Mohammad S. and Rezaei, Seyed Mehdi and Mardi, Noor Azizi and Kamali E., Ali (2018) Motion control of a two-axis linear motor-driven stage in the micro-milling process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 232 (1). pp. 65-76. ISSN 0954-4089

Hindia, Mhd Nour and Al-Samman, Ahmed Mohammed and Rahman, Tharek Abd and Yazdani, T.M. (2018) Outdoor large-scale path loss characterization in an urban environment at 26, 28, 36, and 38 GHz. Physical Communication, 27. pp. 150-160. ISSN 1874-4907

Hmood, Jassim K. and Harun, Sulaiman Wadi (2018) Broadband optical frequency comb generator based on driving N-cascaded modulators by Gaussian-shaped waveform. Optical Fiber Technology, 42. pp. 75-83. ISSN 1068-5200

Hoque, Nusrat and Jumaat, Mohd Zamin (2018) Debonding failure analysis of prestressed FRP strengthened RC beams. Structural Engineering and Mechanics, 66 (4). pp. 543-555. ISSN 1225-4568

Hosen, Md Akter and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ramli Sulong, Nor Hafizah (2018) CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique. Construction and Building Materials, 165. pp. 28-44. ISSN 0950-0618

Hossain, Ferdous and Tan, Kim Geok and Rahman, Tharek Abd and Hindia, Mhd Nour and Dimyati, Kaharudin and Abdaziz, Azlan (2018) Indoor Millimeter-Wave Propagation Prediction by Measurement and Ray Tracing Simulation at 38 GHz. Symmetry, 10 (10). p. 464. ISSN 2073-8994

Hossain, Md Anwar and Mohamed Iqbal, Mohammad Anwar and Julkapli, Nurhidayatullaili Muhd and Kong, Pei San and Juan, Joon Ching and Lee, Hwei Voon (2018) Development of catalyst complexes for upgrading biomass into ester-based biolubricants for automotive applications: a review. RSC Advances, 8 (10). pp. 5559-5577. ISSN 2046-2069

Hossain, Md Arafat and Jewaratnam, Jegalakshimi and Ramalingam, Anantharaj and Sahu, Jaya Narayan and Ganesan, Poo Balan (2018) A DFT method analysis for formation of hydrogen rich gas from acetic acid by steam reforming process. Fuel, 212. pp. 49-60. ISSN 0016-2361

Hossain, Md Sazzad and Ong, Zhi Chao and Ng, Siew Cheok and Ismail, Zubaidah and Khoo, Shin Yee (2018) Inverse identification of impact locations using multilayer perceptron with effective time-domain feature. Inverse Problems in Science and Engineering, 26 (3). pp. 443-461. ISSN 1741-5977

Hossain, Md Shabbir and El-Shafie, Ahmed and Mahzabin, Mst Sadia and Zawawi, Mohd Hafiz (2018) System performances analysis of reservoir optimization–simulation model in application of artificial bee colony algorithm. Neural Computing and Applications, 30 (7). pp. 2101-2112. ISSN 0941-0643

Hossain, Monowar and Mekhilef, Saad and Afifi, Firdaus and Halabi, Laith M. and Olatomiwa, Lanre and Seyedmahmoudian, Mehdi and Horan, Ben and Stojcevski, Alex (2018) Application of the hybrid ANFIS models for long term wind power density prediction with extrapolation capability. PLoS ONE, 13 (4). e0193772. ISSN 1932-6203

Hosseini, Maryam and Abdelrazek, Ali H. and Sadri, Rad and Mallah, Abdul Rahman and Kazi, Salim Newaz and Chew, Bee Teng and Rozali, Shaifulazuar and Yusoff, Nukman (2018) Numerical study of turbulent heat transfer of nanofluids containing eco-friendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer, 127. pp. 403-412. ISSN 0017-9310

Hosseini, Soraya and Moghaddas, Houyar and Masoudi Soltani, Salman and Aroua, Mohamed Kheireddine and Kheawhom, Soorathep and Yusoff, Rozita (2018) Electrochemical bicarbonate reduction in the presence of Diisopropylamine on sliver oxide in alkaline sodium bicarbonate medium. Journal of Environmental Chemical Engineering, 6 (5). pp. 6335-6343. ISSN 2213-3437

Hosseini, Soraya and kheawhom, Soorathep and Masoudi Soltani, Salman and Aroua, Mohamed Kheireddine and Moghaddas, Houyar and Yusoff, Rozita (2018) Improvement of product selectivity in bicarbonate reduction into formic acid on a tin-based catalyst by integrating nano-diamond particles. Process Safety and Environmental Protection, 116. pp. 494-505. ISSN 0957-5820

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng (2018) Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213. pp. 106-114. ISSN 0016-2361

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng and Chuah, Hun Guan (2018) Effect of Calophyllum Inophyllum biodiesel-diesel blends on combustion, performance, exhaust particulate matter and gaseous emissions in a multi-cylinder diesel engine. Fuel, 227. pp. 154-164. ISSN 0016-2361

How, Seow Wah and Lim, S.Y. and Lim, P.B. and Aris, A.M. and Ngoh, Gek Cheng and Curtis, Thomas Peter and Chua, Adeline Seak May (2018) Low-dissolved-oxygen nitrification in tropical sewage: an investigation on potential, performance and functional microbial community. Water Science and Technology, 77 (9). pp. 2274-2283. ISSN 0273-1223

Huda, Md Nazmul and Jumaat, Mohd Zamin and Islam, Abul Bashar Mohammad Saiful and Al-Kutti, Walid Abubaker (2018) Performance of high strength lightweight concrete using palm wastes. IIUM Engineering Journal, 19 (2). pp. 30-42. ISSN 1511-788X

Husin, Hazlina and Solo, Bernadine B. and Ibrahim, Izni Mariah and Ong, Hwai Chyuan and Roslan, Azmi (2018) Weight loss effect and potentiodynamic polarization response of 1-butyl-3-methylimidazolium chloride ionic liquid in highly acidic medium. Journal of Engineering Science and Technology, 13 (4). pp. 1005-1015. ISSN 1823-4690

Hussin, Farihahusnah and Issabayeva, Gulnaziya and Aroua, Mohamed Kheireddine (2018) Solar photovoltaic applications: opportunities and challenges. Reviews in Chemical Engineering, 34 (4). pp. 503-528. ISSN 0167-8299

I

Ibrahim, Imanurfatiehah and Khairuddin, Anis Salwa Mohd and Arof, Hamzah and Yusof, Rubiyah and Hanafi, Effariza (2018) Statistical feature extraction method for wood species recognition system. European Journal of Wood and Wood Products, 76 (1). pp. 345-356. ISSN 0018-3768

Ibrahim, Mahmoud Z. and Sarhan, Ahmed Aly Diaa Mohammed and Kuo, Tsung Yuan and Yusof, Farazila and Hamdi, Mohd and Chien, Chi Sheng (2018) Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating. The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1977-1987. ISSN 0268-3768

Idris, N.F. and Lokman, Muhammad Quisar and Harun, Sulaiman Wadi and Rahim, Hazli Rafis Abdul and Hasbullah, Nurul Fadzlin and Saidin, Norazlina (2018) Influence of growth duration to the Zinc Oxide (ZnO) nanorods on single-mode silica fiber. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-7). pp. 73-77. ISSN 2180-1843

Illias, Hazlee Azil and Wee, Zhao Liang (2018) Identification of transformer fault based on dissolved gas analysis using hybrid support vector machine-modified evolutionary particle swarm optimisation. PLoS ONE, 13 (1). e0191366. ISSN 1932-6203

Isa, Naimah Mat and Irawati, Ninik and Harun, Sulaiman Wadi and Ahmad, Fauzan and Rahman, Husna Abdul and Yusoff, Mohd Hanapiah Mohd (2018) Multi-walled carbon nanotubes doped Poly(Methyl MethAcrylate) microfiber for relative humidity sensing. Sensors and Actuators A: Physical, 272. pp. 274-280. ISSN 0924-4247

Isa, Naimah Mat and Irawati, Ninik and Rahman, Husna Abdul and Yusoff, Mohd Hanapiah Mohd and Harun, Sulaiman Wadi (2018) Polyaniline-Doped Poly (Methyl Methacrylate) Microfiber for Methanol Sensing. IEEE Sensors Journal, 18 (7). pp. 2801-2806. ISSN 1530-437X

Islam, Haidar and Mekhilef, Saad and Shah, Noraisyah Mohamed and Tey, Kok Soon and Seyedmahmousian, Mehdi and Horan, Ben and Stojcevski, Alex (2018) Performance Evaluation of Maximum Power Point Tracking Approaches and Photovoltaic Systems. Energies, 11 (2). p. 365. ISSN 1996-1073

Islam, Md Rabiul and Jaafar, Wan Zurina Wan and Lai, Sai Hin and Osman, Normaniza and Din, Moktar Aziz Mohd and Zuki, Fathiah Mohamed and Srivastava, Prashant and Islam, Tanvir and Adham, Md Ibrahim (2018) Soil erosion assessment on hillslope of GCE using RUSLE model. Journal of Earth System Science, 127 (4). p. 50. ISSN 0253-4126

Islam, Md Rabiul and Jaafar, Wan Zurina Wan and Lai, Sai Hin and Osman, Normaniza and Hossain, Anamul and Mohd, Nuruol Syuhadaa (2018) Development of an intelligent system based on ANFIS model for predicting soil erosion. Environmental Earth Sciences, 77 (5). p. 186. ISSN 1866-6280

Islam, Md. Sakinul and Dhanavath, Kotaiah Naik and Kao, Nhol and Bhattacharjee, Pradipto K. and Ali, Brahim Si and Yusoff, Rozita (2018) Carbon dioxide induced degradation of diethanolamine during absorption and desorption processes. Chinese Journal of Chemical Engineering, 26 (2). pp. 293-302. ISSN 1004-9541

Ismail, Ezzatul Irradah and Ashraf Zolkopli, S Muhammad and Lokman, Muhammad Quisar and Yahaya, Hafizal and Harun, Sulaiman Wadi and Ahmad, Fauzan (2018) Q-switched Erbium Doped Fiber Laser Incorporating Antimony (III) Telluride in Polyvinyl Alcohol as Saturable Absorber. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 409-415. ISSN 2502-4752

J

Jafry, A.A.A. and Arof, Hamzah and Kasim, Nabilah and Munajat, Yusof and Apsari, Retna and Harun, Sulaiman Wadi (2018) Q-switched erbium-doped fiber laser using MoS 2 deposited side-polished D-shape fiber. Nonlinear Optics, Quantum Optics, 49 (3-4). pp. 285-293. ISSN 1543-0537

Jali, Mohd Hafiz and Rahim, Hazli Rafis Abdul and Md Ashadi, Md Johari and Thokchom, Siddharth and Harun, Sulaiman Wadi (2018) Applied microfiber evanescent wave on ZnO nanorods coated glass surface towards temperature sensing. Sensors and Actuators A: Physical, 277. pp. 103-111. ISSN 0924-4247

Jallad, Jafar and Mekhilef, Saad and Mokhlis, Hazlie and Laghari, Javed Ahmed and Badran, Ola (2018) Application of Hybrid Meta-Heuristic Techniques for Optimal Load Shedding Planning and Operation in an Islanded Distribution Network Integrated with Distributed Generation. Energies, 11 (5). p. 1134. ISSN 1996-1073

Jamadin, Adiza and Ibrahim, Zainah and Amin, Norliyati Mohd and Alisibramulisi, Anizahyati and Suliman, Nurul Huda and Malai Hussin, M.H.S. (2018) Dynamic behaviour of existing steel pedestrian bridge. International Journal of Civil Engineering and Technology, 9 (7). pp. 1443-1450. ISSN 0976-6308

Jamal, Nur Ayuni and Maizatul, O. and Anuar, Hazleen and Yusof, Farazila and Nor, Yusilawati Ahmad and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 460-466. ISSN 0933-5137

Jamaludin, Jafferi and Syamsuddin, Syarkawi and Rahim, Nasrudin Abd and Hew, Wooi Ping (2018) Control of switch-sharing-based multilevel inverter suitable for photovoltaic applications. Journal of the Franklin Institute, 355 (3). pp. 1018-1039. ISSN 0016-0032

Jannifar, A. and Baharom, Mohd Faizal and Jufriadi, - and Harun, Sulaiman Wadi (2018) Q-switched ytterbium-doped fiber laser using V2O5 polymer film as saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 1-9. ISSN 1543-0537

Jannifar, A. and Baharom, Mohd Faizal and Zulkipli, N.F. and Jufriadi, - and Harun, Sulaiman Wadi (2018) Q-switched ytterbium-doped fiber laser with nickel oxide nanoparticles saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 41-50. ISSN 1543-0537

Jannifar, A. and Zubir, Mohd Nashrul Mohd and Kazi, Salim Newaz and Zulkifli, Nurin Wahidah Mohd and Ahmad, Norhafizan (2018) Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition. Journal of Mechanical Science and Technology, 32 (7). pp. 3009-3021. ISSN 1738-494X

Janurin, Nur Syafiqah and Ibrahim, Shaliza and Zamzam, Zauyah and Kato, Yoshikazu (2018) Solid Suspension Characteristics in a Dished Base Tank for a Range of Geometric and Solids Properties. Journal of Chemical Engineering of Japan, 51 (2). pp. 152-158. ISSN 0021-9592

Javanmardi, Ahad and Ibrahim, Zainah and Ghaedi, Khaled and Khan, Niaz Bahadur and Benisi Ghadim, Hamed (2018) Seismic isolation retrofitting solution for an existing steel cable-stayed bridge. PLoS ONE, 13 (7). e0200482. ISSN 1932-6203

Javed, Muhammad Faisal and Ramli Sulong, Nor Hafizah and Memon, Shazim Ali and Rehman, Sardar Kashif-Ur and Khan, Niaz Bahadur (2018) Flexural behaviour of steel hollow sections filled with concrete that contains OPBC as coarse aggregate. Journal of Constructional Steel Research, 148. pp. 287-294. ISSN 0143-974X

Javed, Muhammad Faisal and Ramli Sulong, Nor Hafizah and Memon, Shazim Ali and Rehman, Sardar Kashif-ur and Khan, Niaz Bahadur (2018) Experimental and numerical study of flexural behavior of novel oil palm concrete filled steel tube exposed to elevated temperature. Journal of Cleaner Production, 205. pp. 95-114. ISSN 0959-6526

Jeddi, Mahdi Zeinizadeh and Ramli Sulong, Nor Hafizah (2018) Pull-out performance of a novel anchor blind bolt (TubeBolt) for beam to concrete-filled tubular (CFT) column bolted connections. Thin-Walled Structures, 124. pp. 402-414. ISSN 0263-8231

Johari, Md Ashadi Md and Abdul Khudus, Muhammad Imran Mustafa and Jali, Mohd Hafiz and Al Noman, Abdullah and Harun, Sulaiman Wadi (2018) Effect of size on single and double optical microbottle resonator humidity sensors. Sensors and Actuators A: Physical, 284. pp. 286-291. ISSN 0924-4247

Johari, Md Ashadi Md and Al Noman, Abdullah and Abdul Khudus, Muhammad Imran Mustafa and Jali, Mohd Hafiz and Yusof, Haziezol Helmi Mohd and Harun, Sulaiman Wadi and Yasin, Moh (2018) Microbottle resonator for formaldehyde liquid sensing. Optik, 173. pp. 180-184. ISSN 0030-4026

K

Kacem, Ibrahim and Sait, Belkacem and Mekhilef, Saad and Sabeur, Nassereddine (2018) A New Routing Approach for Mobile Ad Hoc Systems Based on Fuzzy Petri Nets and Ant System. IEEE Access, 6. pp. 65705-65720. ISSN 2169-3536

Kalantari, Katayoon and Afifi, Amalina Muhammad (2018) Novel chitosan/polyvinyl alcohol/talc composite for adsorption of heavy metals and dyes from aqueous solution. Separation Science and Technology, 53 (16). pp. 2527-2535. ISSN 0149-6395

Kalantari, Katayoon and Afifi, Amalina Muhammad and Nia, Pooria Moozarm and Izadiyan, Zahra and Kalantari, Alireza and Abouzari-lotf, Ebrahim (2018) Electro-Catalytic Behavior of Silver Nanoparticles Embedded in Potato and Tapioca Starch for Oxygen Reduction Reaction. Starch - Stärke, 71 (1-2). p. 1800038. ISSN 0038-9056

Kalantari, Katayoon and Moradihamedani, Pourya and Ibrahim, Nor Azowa and Abdullah, Abdul Halim Bin and Afifi, Amalina Muhammad (2018) Polysulfone mixed-matrix membrane incorporating talc clay particles for gas separation. Polymer Bulletin, 75 (8). pp. 3723-3738. ISSN 0170-0839

Kalwar, Kafeel Ahmed and Aamir, Muhammad and Mekhilef, Saad (2018) A design method for developing a high misalignment tolerant wireless charging system for electric vehicles. Measurement, 118. pp. 237-245. ISSN 0263-2241

Kamarudin, Muhammad Akmal and Khan, Ammar Ahmed and Said, Suhana Mohd and Qasim, Malik M. and Wilkinson, Timothy David (2018) Composite liquid crystal-polymer electrolytes in dye-sensitised solar cells: effects of mesophase alkyl chain length. Liquid Crystals, 45 (1). pp. 112-121. ISSN 0267-8292

Kanadasan, Jegathish and Razak, Hashim Abdul and Subramaniam, Vijaya (2018) Properties of high flowable mortar containing high volume palm oil clinker (POC) fine for eco-friendly construction. Journal of Cleaner Production, 170. pp. 1244-1259. ISSN 0959-6526

Kania, Dina and Yunus, Robiah and Omar, Rozita and Abdul Rashid, Suraya and Jan, Badrul Mohamed and Arsanjani, Niloofar (2018) Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids. Journal of Molecular Liquids, 266. pp. 846-855. ISSN 0167-7322

Kapitaniak, Tomasz and Mohammadi, S. Alireza and Mekhilef, Saad and Alsaadi, Fawaz and Hayat, Tasawar and Pham, Viet-Thanh (2018) A New Chaotic System with Stable Equilibrium: Entropy Analysis, Parameter Estimation, and Circuit Design. Entropy, 20 (9). p. 670. ISSN 1099-4300

Kardooni, Roozbeh and Yusoff, Sumiani and Kari, Fatimah and Moeenizadeh, Leila (2018) Public opinion on renewable energy technologies and climate change in Peninsular Malaysia. Renewable Energy, 116. pp. 659-668. ISSN 0960-1481

Karim, Mohammad Razaul and Yusoff, Sumiani and Razak, Hashim Abdul and Chowdhury, Faisal Islam and Zabed, Hossain (2018) Heavy Metals Leaching Behaviour Assessment of Palm Oil Clinker. Sains Malaysiana, 47 (3). pp. 523-530. ISSN 0126-6039

Kasan, Nor Azman and Ghazali, Nurarina Ayuni and Hashim, Nurul Fakriah Che and Jauhari, Iswadi and Jusoh, Ahmad and Ikhwanuddi, Mhd (2018) 18s rDNA Sequence Analysis of Microfungi from Biofloc-based System in Pacific Whiteleg Shrimp, Litopenaeus vannamei Culture. Biotechnology, 17 (3). pp. 135-141. ISSN 1682-296X

Kasim, Hazmimi and Hassan, Che Rosmani Che and Hamid, Mahar Diana and Emami, Sina Davazdah and Danaee, Mahmoud (2018) Determination of factors affecting safety practices in Malaysian radiation facilities. Safety Science, 104. pp. 70-80. ISSN 0925-7535

Kasim, Nabilah and Latiff, Anas Abdul and Rusdi, Muhammad Farid Mohd and Hisham, M.B. and Harun, Sulaiman Wadi and Razak, Nor Farhah (2018) Short-pulsed Q-switched Thulium doped fiber laser with graphene oxide as a saturable absorber. Optik, 168. pp. 462-466. ISSN 0030-4026

Katman, Herda Yati and Ibrahim, Mohd Rasdan and Norhisham, Shuhairy and Ismail, Norlela and Rahman, Noorhazlinda Abd (2018) Creep-recovery behaviour of crumb rubber modified bitumen (CRMB) containing trans-polyoctenamer. International Journal of Engineering Research and Technology, 11 (12). pp. 2073-2088. ISSN 0974-3154

Kazemi, Nima and Abdul-Rashid, Salwa Hanim and Ghazilla, Raja Ariffin Raja and Shekarian, Ehsan and Zanoni, Simone (2018) Economic order quantity models for items with imperfect quality and emission considerations. International Journal of Systems Science: Operations & Logistics, 5 (2). pp. 99-115. ISSN 2330-2674

Keshtegar, Behrooz and Baharom, Shahrizan and El-Shafie, Ahmed (2018) Self-adaptive conjugate method for a robust and efficient performance measure approach for reliability-based design optimization. Engineering with Computers, 34 (1). pp. 187-202. ISSN 0177-0667

Khairuddin, Nurul Mujahidah Ahmad and Afifi, Amalina Muhammad and Hashim, Nur Awanis and Mohamad, Shaza Eva and Kalantari, Katayoon (2018) Immobilization of Bovine Serum Albumin on the Chitosan/PVA Film. Sains Malaysiana, 47 (6). pp. 1311-1318. ISSN 0126-6039

Khan, Ghulamullah and Basirun, Wan Jefrey and Badarudin, Ahmad and Kazi, Salim Newaz and Ahmed, Pervaiz and Ahmed, Syed Muzamil and Khan, Ghulam Mustafa (2018) Corrosion Inhibition Performance and Adsorption Mechanism of Novel Quinazoline Schiff Base on Low Alloy Steel in HCl Media. International Journal of Electrochemical Science, 13 (12). pp. 12420-12436. ISSN 1452-3981

Khan, Md Munir Hayet and Muhammad, Nur Shazwani and El-Shafie, Ahmed (2018) Wavelet-ANN versus ANN-Based Model for Hydrometeorological Drought Forecasting. Water, 10 (8). p. 998. ISSN 2073-4441

Khan, Niaz Bahadur and Ibrahim, Zainah and Khan, Muhammad Ijaz and Hayat, Tasawar and Javed, Muhammad Faisal (2018) VIV study of an elastically mounted cylinder having low mass-damping ratio using RANS model. International Journal of Heat and Mass Transfer, 121. pp. 309-314. ISSN 0017-9310

Khan, Saad Jawaid and Khan, Soobia Saad and Usman, Juliana and Mokhtar, Abdul Halim and Abu Osman, Noor Azuan (2018) Combined effects of knee brace, laterally wedged insoles and toe-in gait on knee adduction moment and balance in moderate medial knee osteoarthritis patients. Gait & Posture, 61. pp. 243-249. ISSN 0966-6362

Khan, Saad Jawaid and Khan, Soobia Saad and Usman, Juliana and Mokhtar, Abdul Halim and Abu Osman, Noor Azuan (2018) Effects of different foot progression angles and platform settings on postural stability and fall risk in healthy and medial knee osteoarthritic adults. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (2). pp. 163-171. ISSN 0954-4119

Khoo, Shin Yee and Lian, Yee Cheng and Ong, Zhi Chao and Ismail, Zubaidah and Noroozi, Siamak (2018) Time effective structural frequency response testing with oblique impact. In: ICAVNCE 2018 : 20th International Conference on Acoustics, Vibration and Noise Control Engineering, 21-22 June 2018, Venice, Italy.

Khosropanah, Pegah and Ramli, Abdul Rahman and Abbasi, Mohammad Reza and Marhaban, Mohammad Hamiruce and Ahmedov, Anvarjon (2018) A hybrid unsupervised approach toward EEG epileptic spikes detection. Neural Computing and Applications. pp. 1-22. ISSN 0941-0643

Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Tamin, Mohd Nasir and Hamdi, Mohd (2018) Effects of Sample and Indenter Configurations of Nanoindentation Experiment on the Mechanical Behavior and Properties of Ductile Materials. Metals, 8 (6). p. 421. ISSN 2075-4701

Kong, Kok Haw and Chong, Wen Tong and Koh, V.L. (2018) Sustainable design on semi-ducted reversible smoke extraction system in basement parking facilities. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Kong, Pei San and Cognet, Patrick and Peres, Yolande and Esvan, Jerome and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2018) Development of a Novel Hydrophobic ZrO2–SiO2 Based Acid Catalyst for Catalytic Esterification of Glycerol with Oleic Acid. Industrial & Engineering Chemistry Research, 57 (29). pp. 9386-9399. ISSN 0888-5885

Koong, Gia Ing and Mokhlis, Hazlie and Jamian, Jasrul Jamani and Illias, Hazlee Azil and Dahalan, Wardiah Mohd and Aman, Muhammad Mohsin (2018) Simultaneous Network Reconfiguration with Distributed Generation Sizing and Tap Changer Adjustment for Power Loss Reduction Using Imperialist Competitive Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2779-2792. ISSN 2193-567X

Krishnamoorthy, Rajeev and Kumar, Narendra and Grebennikov, Andrei and Ramiah, Harikrishnan (2018) A High-Efficiency Ultra-Broadband Mixed-Mode GaN HEMT Power Amplifier. IEEE Transactions on Circuits and Systems II: Express Briefs, 65 (12). pp. 1929-1933. ISSN 1549-7747

Kumar, Ahlad and Hassan, Mohd Fikree and Paramesran, Raveendran (2018) Learning based restoration of Gaussian blurred images using weighted geometric moments and cascaded digital filters. Applied Soft Computing, 63. pp. 124-138. ISSN 1568-4946

L

Laghari, Javed Ahmed and Almani, Suhail Ahmed and Kumar, Jagdesh and Mokhlis, Hazlie and Bakar, Ab Halim Abu (2018) A Smart Under-Frequency Load Shedding Scheme based on Takagi-Sugeno Fuzzy Inference System and Flexible Load Priority. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 125-131. ISSN 2158-107X

Lah, Nurul Akmal Che and Johan, Mohd Rafie and Samykano, Mahendran and Saari, Mohd Mawardi (2018) Truncated and spheroidal Ag nanoparticles: a matter of size transformation. Colloid and Polymer Science, 296 (1). pp. 121-131. ISSN 0303-402X

Lai, V. and Ahmed, Ali Najah and Malek, Marlinda Abdul and El-Shafie, Ahmed and El-Shafie, Amr (2018) Evolutionary algorithm for forecastng mean sea level based on meta-heuristic approach. International Journal of Civil Engineering and Technology, 9 (11). pp. 1404-1413. ISSN 0976-6308

Latiff, Anas Abdul and Cheng, Xiau San and Rusdi, Muhammad Farid Mohd and Paul, Mukul Chandra and Harun, Sulaiman Wadi and Ahmad, Harith (2018) Molybdenum disulfide saturable absorber for eye-safe mode-locked fiber laser generation. Journal of Nonlinear Optical Physics & Materials, 27 (01). p. 1850010. ISSN 0218-8635

Latiff, Nurul Ain Abdul and Illias, Hazlee Azil and Bakar, Ab Halim Abu and Abd Halim, Syahirah and Dabbak, Sameh Ziad Ahmad (2018) Design technique for leakage current reduction in surge arrester using gravitational search algorithm and imperialist competitive algorithm. COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 37 (1). pp. 357-374. ISSN 0332-1649

Latiff, Nurul Ain Abdul and Illias, Hazlee Azil and Bakar, Ab Halim Abu and Dabbak, Sameh Ziad Ahmad (2018) Measurement and Modelling of Leakage Current Behaviour in ZnO Surge Arresters under Various Applied Voltage Amplitudes and Pollution Conditions. Energies, 11 (4). p. 875. ISSN 1996-1073

Lee, Gooyong and Ibrahim, Shaliza and Kittappa, Shanmuga and Park, Heekyung and Park, Chang Min (2018) Sonocatalytic activity of a heterostructured β-Bi 2 O 3 /Bi 2 O 2 CO 3 nanoplate in degradation of bisphenol A. Ultrasonics Sonochemistry, 44. pp. 64-72. ISSN 1350-4177

Lee, Jacky Jia Li and Andriyana, Andri and Ang, Bee Chin and Huneau, Bertrand and Verron, Erwan (2018) Electrospun PMMA polymer blend nanofibrous membrane: electrospinability, surface morphology and mechanical response. Materials Research Express, 5 (6). 065311. ISSN 2053-1591

Lee, Siew Cheng and Hashim, Roslan and Mo, Kim Hung (2018) The Evaluation of Geotube Behaviors on Muddy Beach: Field Monitoring and Numerical Analysis. KSCE Journal of Civil Engineering, 22 (11). pp. 4185-4193. ISSN 1226-7988

Lei, Zhen Ce and Zainal Abidin, Nor Ishida and Wong, Yew Hoong (2018) Structural, chemical, and electrical properties of ZrO2/Ge system formed via oxidation/nitridation in N2O gas ambient. Journal of Materials Science: Materials in Electronics, 29 (15). pp. 12888-12898. ISSN 0957-4522

Lekbir, Abdelhak and Hassani, Samir and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Mekhilef, Saad and Saidur, Rahman (2018) Improved energy conversion performance of a novel design of concentrated photovoltaic system combined with thermoelectric generator with advance cooling system. Energy Conversion and Management, 177. pp. 19-29. ISSN 0196-8904

Leong, Kin Yuen and Razali, Idayu and Ku Ahmad, Ku Zarina and Ong, Hwai Chyuan and Ghazali, Mariyam Jameelah and Abdul Rahman, Mohd Rosdzimin (2018) Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach. International Communications in Heat and Mass Transfer, 90. pp. 23-28. ISSN 0735-1933

Li, Shi and Yi, Yating and Yin, Yu and Jiang, Yuxuan and Zhao, Haiyan and Du, Yanqiu and Chen, Yujin and Lewis, Elfed and Farrell, Gerald and Harun, Sulaiman Wadi and Wang, Pengfei (2018) A Microfiber Knot Incorporating a Tungsten Disulfide Saturable Absorber Based Multi-Wavelength Mode-Locked Erbium-Doped Fiber Laser. Journal of Lightwave Technology, 36 (23). pp. 5633-5639. ISSN 0733-8724

Liew, Shan Qin and Ngoh, Gek Cheng and Yusoff, Rozita and Teoh, Wen Hui (2018) Acid and Deep Eutectic Solvent (DES) extraction of pectin from pomelo (Citrus grandis (L.) Osbeck) peels. Biocatalysis and Agricultural Biotechnology, 13. pp. 1-11. ISSN 1878-8181

Liew, Shan Qin and Teoh, Wen Hui and Tan, Chee Keong and Yusoff, Rozita and Ngoh, Gek Cheng (2018) Subcritical water extraction of low methoxyl pectin from pomelo ( Citrus grandis (L.) Osbeck) peels. International Journal of Biological Macromolecules, 116. pp. 128-135. ISSN 0141-8130

Lim, Chee Cheow and Ramiah, Harikrishnan and Yin, Jun and Mak, Pui-In and Martins, Rui Paulo (2018) An Inverse-Class-F CMOS Oscillator With Intrinsic-High-Q First Harmonic and Second Harmonic Resonances. IEEE Journal of Solid-State Circuits, 53 (12). pp. 3528-3539. ISSN 0018-9200

Lim, Einly and Lim, Renly and Suhaimi, Anwar and Chan, Bee Ting and Wahab, Ahmad Khairi Abdul (2018) Treatment of chronic back pain using indirect vibroacoustic therapy: A pilot study. Journal of Back and Musculoskeletal Rehabilitation, 31 (6). pp. 1041-1047. ISSN 1053-8127

Lim, Hong Cheet and Ong, Zhi Chao and Brandt, Anders (2018) Implementation of phase controlled impact device for enhancement of frequency response function in operational modal testing. Journal of the Franklin Institute, 355 (1). pp. 291-313. ISSN 0016-0032

Lim, Hong Cheet and Ong, Zhi Chao and Ismail, Zubaidah and Khoo, Shin Yee (2018) A Performance Study of Controlled Impact Timing on Harmonics Reduction in Operational Modal Testing. Journal of Dynamic Systems, Measurement, and Control, 141 (3). 034501. ISSN 0022-0434

Lim, Pooi Khoon and Ng, Siew Cheok and Lovell, Nigel Hamilton and Yu, Yong Poh and Tan, Maw Pin and McCombie, Devin and Lim, Einly and Redmond, Stephen James (2018) Adaptive template matching of photoplethysmogram pulses to detect motion artefact. Physiological Measurement, 39 (10). p. 105005. ISSN 1361-6579

Ling, Tung Chai and Qu, Lie and Yang, Jiujun and Guo, Lei and Mo, Kim Hung (2018) Autoclaved Lime-Saline Soil Products: Reactivity Assessments and Effects of Quartz Sand. Journal of Materials in Civil Engineering, 30 (4). 04018055. ISSN 0899-1561

Liyana, N.K. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2018) Polarization and EIS studies to evaluate the effect of aluminum concentration on the corrosion behavior of SAC105 solder alloy. Materials Science-Poland, 35 (4). pp. 694-701. ISSN 2083-1331

Lokman, Muhammad Quisar and Yusoff, Siti Fatimah Az Zahra and Ahmad, Fauzan and Zakaria, Rozalina and Yahaya, Hafizal and Shafie, Suhaidi and Rosnan, Rizuan Mohd and Harun, Sulaiman Wadi (2018) Deposition of silver nanoparticles on polyvinyl alcohol film using electron beam evaporation and its application as a passive saturable absorber. Results in Physics, 11. pp. 232-236. ISSN 2211-3797

Loo, Mei Sze and Le Cam, Jean Benoît and Andriyana, Andri and Robin, Eric (2018) Inelastic responses of swollen nitrile rubber under cyclic loading. Rubber Chemistry and Technology, 91 (1). pp. 136-150. ISSN 0035-9475

Loow, Yu-Loong and Wu, Ta Yeong and Yang, Ge Hoa and Ang, Lin Yang and New, Eng Kein and Siow, Lee Fong and Md. Jahim, Jamaliah and Mohammad, Abdul Wahab and Teoh, Wen Hui (2018) Deep eutectic solvent and inorganic salt pretreatment of lignocellulosic biomass for improving xylose recovery. Bioresource Technology, 249. pp. 818-825. ISSN 0960-8524

M

Ma, Li Ya and Nordin, Anis Nurashikin and Soin, Norhayati (2018) A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch. Microsystem Technologies, 24 (1). pp. 561-574. ISSN 0946-7076

Mahmood, Mohamad Syafie and Said, Suhana Mohd and Chatterjee, Abhijit and Sabri, Mohd Faizul Mohd and Mainal, Azizah and Daud, Mohammad Noh and Sairi, Nor Asrina (2018) DFT studies of structural–electronic correlation for the HAT6 discotic liquid crystal columnar stacking. Materials Research Express, 5 (12). p. 126306. ISSN 2053-1591

Mahyiddin, Wan Amirul Wan Mohd and Zakaria, Nur Azira and Dimyati, Kaharudin and Mazuki, Ahmad Loqman Ahmad (2018) Downlink Rate Analysis of Training-Based Massive MIMO Systems With Wireless Backhaul Networks. IEEE Access, 6. pp. 45086-45099. ISSN 2169-3536

Majed, Mohammed Bahjat and Rahman, Tharek Abd and Aziz, Omar Abdul and Hindia, Mhd Nour and Hanafi, Effariza (2018) Channel Characterization and Path Loss Modeling in Indoor Environment at 4.5, 28, and 38 GHz for 5G Cellular Networks. International Journal of Antennas and Propagation, 2018. pp. 1-14. ISSN 1687-5869

Makmud, Mohamad Zul Hilmey and Illias, Hazlee Azil and Chee, Ching Yern and Sarjadi, Mohd Sani (2018) Influence of Conductive and Semi-Conductive Nanoparticles on the Dielectric Response of Natural Ester-Based Nanofluid Insulation. Energies, 11 (2). p. 333. ISSN 1996-1073

Mallah, Abdul Rahman and Kazi, Salim Newaz and Zubir, Mohd Nashrul Mohd and Badarudin, Ahmad (2018) Blended morphologies of plasmonic nanofluids for direct absorption applications. Applied Energy, 229. pp. 505-521. ISSN 0306-2619

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2018) Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil. International Journal of Surface Science and Engineering, 12 (1). pp. 60-75. ISSN 1749-785X

Mansoor, Muhammad Adil and McKee, Vickie and Yusof, Farazila and Lim, S.P. and Zubir, Mohd Nashrul Mohd and Ming, Huang Nay and Mazhar, Muhammad Ehsan (2018) Lanthanum–titanium oxide composite from a single molecular cluster: Non-enzymatic mesoporous electrochemical nitrite ion sensor. Polyhedron, 156. pp. 332-341. ISSN 0277-5387

Mansor, Muhammad Safwan Mohd and Yusof, Farazila and Ariga, Tadashi and Miyashita, Yukio (2018) Microstructure and mechanical properties of micro-resistance spot welding between stainless steel 316L and Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2567-2581. ISSN 0268-3768

Markom, Arni Munira and Tan, Sin Jin and Haris, Hazlihan and Paul, Mukul Chandra and Dhar, Anirban and Das, Shyamal and Harun, Sulaiman Wadi (2018) Experimental Observation of Bright and Dark Solitons Mode-Locked with Zirconia-Based Erbium-Doped Fiber Laser. Chinese Physics Letters, 35 (2). 024203. ISSN 0256-307X

Matinmanesh, Ali and Li, Yiming and Nouhi, A. and Zalzal, Paul and Schemitsch, Emil H. and Towler, Mark Robert and Papini, Marcello (2018) Evaluating the critical strain energy release rate of bioactive glass coatings on Ti6Al4V substrates after degradation. Journal of the Mechanical Behavior of Biomedical Materials, 78. pp. 273-281. ISSN 1751-6161

Mazaheri, Hoora and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Amini, Zeynab and Harrison, Mark D. and Wang, Chin-Tsan and Kusumo, Fitranto and Alwi, Azham (2018) Rice bran oil based biodiesel production using calcium oxide catalyst derived from Chicoreus brunneus shell. Energy, 144. pp. 10-19. ISSN 0360-5442

Md Nasir, Khairunisa and Ramli Sulong, Nor Hafizah and Johan, Mohd Rafie and Afifi, Amalina Muhammad (2018) An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2). pp. 142-153. ISSN 0369-9420

Memon, Mudasir Ahmed and Mekhilef, Saad and Mubin, Marizan (2018) Selective harmonic elimination in multilevel inverter using hybrid APSO algorithm. IET Power Electronics, 11 (10). pp. 1673-1680. ISSN 1755-4535

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Chen, Wei Hsin and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra (2018) Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology. Energy Conversion and Management, 158. pp. 400-415. ISSN 0196-8904

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra and Cheah, Mei Yee and Wang, Chin Tsan (2018) Physicochemical property enhancement of biodiesel synthesis from hybrid feedstocks of waste cooking vegetable oil and Beauty leaf oil through optimized alkaline-catalysed transesterification. Waste Management, 80. pp. 435-449. ISSN 0956-053X

Misran, Halina and Salim, Musdalilah Ahmad and Ramesh, Singh (2018) Effect of Ag nanoparticles seeding on the properties of silica spheres. Ceramics International, 44 (6). pp. 5901-5908. ISSN 0272-8842

Mo, Kim Hung and Lee, Hong Jie and Liu, Michael Yong Jing and Ling, Tung Chai (2018) Incorporation of expanded vermiculite lightweight aggregate in cement mortar. Construction and Building Materials, 179. pp. 302-306. ISSN 0950-0618

Mo, Kim Hung and Loh, Zhi Pin and Tan, Chee Ghuan and Alengaram, Ubagaram Johnson and Yap, Soon Poh (2018) Behaviour of fibre-reinforced cementitious composite containing high-volume fly ash at elevated temperatures. Sadhana, 43 (11). p. 177. ISSN 0256-2499

Mo, Kim Hung and Mohd Anor, Fatin Amirah and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Rao, K. Jagannadha (2018) Properties of metakaolin-blended oil palm shell lightweight concrete. European Journal of Environmental and Civil Engineering, 22 (7). pp. 852-868. ISSN 2116-7214

Mo, Kim Hung and Yeap, Kee Wei and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, Iftekhair Ibnul (2018) Bond strength evaluation of palm oil fuel ash-based geopolymer normal weight and lightweight concretes with steel reinforcement. Journal of Adhesion Science and Technology, 32 (1). pp. 19-35. ISSN 0169-4243

Mohamad, Mazita and Soin, Norhayati and Ibrahim, Fatimah (2018) Design optimisation of high sensitivity MEMS piezoresistive intracranial pressure sensor using Taguchi approach. Microsystem Technologies, 24 (6). pp. 2637-2652. ISSN 0946-7076

Mohamad, Zeeda Fatimah and Abd Kadir, Siti Norasiah and Nasaruddin, Affan and Sakai, Nobumitsu and Mohamed Zuki, Fathiah and Hussein, Hazreena and Sulaiman, Abdul Halim and Mohd Salleh, Mohammad Shahrul Amin (2018) Heartware as a driver for campus sustainability: Insights from an action-oriented exploratory case study. Journal of Cleaner Production, 196. pp. 1086-1096. ISSN 0959-6526

Mohamad Ahad, Irma Zulayka and Harun, Sulaiman Wadi and Gan, Seng Neon and Phang, Sook Wai (2018) Polyaniline (PAni) optical sensor in chloroform detection. Sensors and Actuators B: Chemical, 261. pp. 97-105. ISSN 0925-4005

Mohamad-Ali, Nurhasyimah and Ghazilla, Raja Ariffin Raja and Abdul-Rashid, Salwa Hanim and Sakundarini, Novita and Ahmad-Yazid, Aznijar and Stephenie, Lydyaty (2018) End-of-life vehicle recovery factors: Malaysian stakeholders' views and future research needs. Sustainable Development, 26 (6). pp. 713-725. ISSN 0968-0802

Mohamaddan, Shahrol and Ishak, N.Z. and Aizuddin, Abang Mohamad and Yamamoto, Shinichiro Ichiroh and Md Dawal, Siti Zawiah and Safawi, E.B. and Khamis, Herman (2018) Design and analysis of ankle foot orthosis for disabled children. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 247-258. ISSN 1985-3157

Mohamaddan, Shahrol and Ishak, N.Z. and Shanat, Musdi and Md Dawal, Siti Zawiah (2018) Development of an ankle foot orthosis for hemiplegic children. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 103-106. ISSN 2180-1843

Mohamaddan, Shahrol and Rasit, Ahmad Hata and Md Dawal, Siti Zawiah (2018) Design of mechanical bracing device for clubfoot treatment. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 91-95. ISSN 2180-1843

Mohamed, Ramuna and Hassan, Che Rosmani Che and Hamid, Mahar Diana (2018) Developing a risk-based inspection practices maturity model for Malaysian industries. Journal of Loss Prevention in the Process Industries, 56. pp. 217-230. ISSN 0950-4230

Mohammed Salih, Abdullah Amer and Hasikin, Khairunnisa and Isa, Nor Ashidi Mat (2018) Adaptive fuzzy exposure local contrast enhancement. IEEE Access, 6. pp. 58794-58806. ISSN 2169-3536

Mohd Zain, Mohamad Zihin and Kanesan, Jeevan and Chuah, Joon Huang and Dhanapal, Saroja and Kendall, Graham (2018) A multi-objective particle swarm optimization algorithm based on dynamic boundary search for constrained optimization. Applied Soft Computing, 70. pp. 680-700. ISSN 1568-4946

Mohd Zain, Mohamad Zihin and Kanesan, Jeevan and Kendall, Graham and Chuah, Joon Huang (2018) Optimization of fed-batch fermentation processes using the Backtracking Search Algorithm. Expert Systems with Applications, 91. pp. 286-297. ISSN 0957-4174

Mohd Zainuri, Muhammad and Mohd Radzi, Mohd and Che Soh, Azura and Mariun, Norman and Rahim, Nasrudin Abd and Teh, Jiashen and Lai, Ching-Ming (2018) Photovoltaic Integrated Shunt Active Power Filter with Simpler ADALINE Algorithm for Current Harmonic Extraction. Energies, 11 (5). p. 1152. ISSN 1996-1073

Momiroski, Vinko and Bhattacharya, Sati and Davoody, Meysam and Abdul Raman, Abdul Aziz and Parthasarathy, Rajarathinam (2018) Size distribution of bubbles in agitated viscous N ewtonian and non‐ N ewtonian solutions. Asia-Pacific Journal of Chemical Engineering, 13 (6). e2267. ISSN 1932-2135

Montazer, Elham and Salami, Erfan and Yarmand, Hooman and Chowdhury, Zaira Zaman and Dahari, Mahidzal and Kazi, Salim Newaz and Badarudin, Ahmad (2018) Development of a new density correlation for carbon-based nanofluids using response surface methodology. Journal of Thermal Analysis and Calorimetry, 132 (2). pp. 1399-1407. ISSN 1388-6150

Moradi, Farhad and Mahdiraji, Ghafour Amouzad and Khandaker, Mayeen Uddin and Ung, Ngie Min and Adikan, Faisal Rafiq Mahamd and Khellaf, Imene and Bradley, D.A. (2018) Investigation on various types of silica fibre as thermoluminescent sensors for ultra-high dose radiation dosimetry. Sensors and Actuators A: Physical, 273. pp. 197-205. ISSN 0924-4247

Motlagh, Farid and Ibrahim, Fatimah and Rashid, Rusdi Abdul and Shafiabady, Niusha and Seghatoleslam, Tahereh and Habil, Hussain (2018) Acute effects of methadone on EEG power spectrum and event-related potentials among heroin dependents. Psychopharmacology, 235 (11). pp. 3273-3288. ISSN 0033-3158

Mousavi, Seyyed Alireza and Mehralian, Mohammad and Khashij, Maryam and Ibrahim, Shaliza (2018) Effect of air flow rate and C/N ratio on biological nitrogen removal through the CANON process treating reject water. Environmental Technology, 39 (22). pp. 2891-2899. ISSN 0959-3330

Muhamad, Maizan and Soin, Norhayati and Ramiah, Harikrishnan (2018) Design of Low Power Low Noise Amplifier using Gm-boosted Technique. Indonesian Journal of Electrical Engineering and Computer Science, 9 (3). pp. 685-689. ISSN 2502-4752

Muhamad, Martini Ridha and Jamaludin, Mohd Fadzil and Sayuti, Mohd and Yusof, Farazila and Zou, Yan Hua (2018) Effects of electrolysis on magnetic abrasive finishing of AA6063-T1 tube internal surface using combination machining tool. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 442-452. ISSN 0933-5137

Muhammad, Ahmad Razif and Haris, Hazlihan and Arof, Hamzah and Tan, Sin Jin and Ahmad, Mushtaq T. and Harun, Sulaiman Wadi (2018) All-fibre Q-switching YDFL operation with bismuth-doped fibre as saturable absorber. Journal of Modern Optics, 65 (8). pp. 946-950. ISSN 0950-0340

Muhammad, Ahmad Razif and Yasin, Moh and Ahmad, Mushtaq T. and Zakaria, Rozalina and Rahim, Hazli Rafis Abdul and Jusoh, Zulzilawati and Arof, Hamzah and Harun, Sulaiman Wadi (2018) All-fiber ytterbium doped Q-switched fiber laser based on copper nanoparticles saturable absorber. Digest Journal of Nanomaterials and Biostructures, 13 (1). pp. 279-284. ISSN 1842-3582

Muhammad, Munir Azam and Mokhlis, Hazlie and Naidu, Kanendra and Franco, John Fredy and Illias, Hazlee Azil and Wang, Li (2018) Integrated database approach in multi-objective network reconfiguration for distribution system using discrete optimisation techniques. IET Generation, Transmission & Distribution, 12 (4). pp. 976-986. ISSN 1751-8687

Mukherjee, Sumona and Mukhopadhyay, Soumyadeep and Zafri, Muhammad Zakwan and Zhan, Xin Min and Hashim, Mohd Ali and Sen Gupta, Bhaskar (2018) Application of guar gum for the removal of dissolved lead from wastewater. Industrial Crops and Products, 111. pp. 261-269. ISSN 0926-6690

Mukhlif, F. and Al-Gumaei, Y.A. and Noordin, K.A. (2018) Energy harvesting for efficient 5G networks. In: IEEE International Conference on Smart Computing and Electronic Enterprise (IEEE ICSCEE2018), 11-12 July 2018, Impiana KLCC Hotel, Kuala Lumpur, Malaysia..

Mukhlif, Fadhil and Hodonu-Wusu, James Oluwaseyi and Noordin, Kamarul Ariffin and Kasirun, Zarinah Mohd (2018) Major trends in device to device communications research: A bibliometric analysis. In: 2018 IEEE 16th Student Conference on Research and Development (SCOReD), 26-28 November 2018, Bangi, Selangor Darul Ehsan, Malaysia.

N

Nady, Ahmed and Baharom, Mohd Faizal and Latiff, Anas Abdul and Harun, Sulaiman Wadi (2018) Mode-Locked Erbium-Doped Fiber Laser Using Vanadium Oxide as Saturable Absorber. Chinese Physics Letters, 35 (4). 044204. ISSN 0256-307X

Nady, Ahmed and Latiff, Anas Abdul and Numan, Arshid and Raymond Ooi, Chong Heng and Harun, Sulaiman Wadi (2018) Theoretical and experimental studies on a Q-switching operation in an erbium-doped fiber laser using vanadium oxide as saturable absorber. Laser Physics, 28 (8). 085106. ISSN 1054-660X

Nafi, Atikah Wan and Afifi, Amalina Muhammad and Abidin, Nor Ishida Zainal and Abdul Aziz, Noor Hidayah and Kalantari, Katayoon (2018) Effect of the Poly L-lactic Acid Coating on the Corrosion of Magnesium in Hank's Solution. Sains Malaysiana, 47 (1). pp. 169-179. ISSN 0126-6039

Naqiuddin, Nor Haziq and Saw, Lip Huat and Yew, Ming Chian and Yusof, Farazila and Poon, Hiew Mun and Cai, Zuansi and Thiam, Hui San (2018) Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-Grey method. Applied Energy, 222. pp. 437-450. ISSN 0306-2619

Natasha, Ahmad Nawawi and Ramesh, Singh and Tan, Chou Yong (2018) Calcium phosphate nanoparticles prepared via solid-state route. International Journal of Engineering & Technology, 7 (4). pp. 80-83. ISSN 2227-524X

Nath, Amit Ranjan and Yehye, Wageeh Abdulhadi and Zulkifli, Nurin Wahidah Mohd and Johan, Mohd Rafie (2018) Ester of thiolated butylated hydroxytoluene: Potential antioxidant for synthetic lubricant oil. Thermochimica Acta, 670. pp. 7-12. ISSN 0040-6031

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani (2018) Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. Construction and Building Materials, 189. pp. 906-923. ISSN 0950-0618

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Alnahhal, Mohammed Fouad (2018) High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar. Journal of Cleaner Production, 190. pp. 272-284. ISSN 0959-6526

Nazri, Fadzli Mohamed and Tan, Chee Ghuan and Abdul Rashid, M.T. (2018) Investigation of Shear Wave Velocity by Using Multi-Channel Analysis of Surface Wave Method for Microzonation Map Development and Its Application to Industrial Frame Structures. Soil Mechanics and Foundation Engineering, 55 (2). pp. 110-114. ISSN 0038-0741

Nazri, Fadzli Mohamed and Tan, Chee Ghuan and Saruddin, Siti Nur Aqilah (2018) Fragility Curves of Regular and Irregular Moment-Resisting Concrete and Steel Frames. International Journal of Civil Engineering, 16 (8). pp. 917-927. ISSN 1735-0522

Ng, Boon Chiang and Kleinheyer, Matthias and Smith, Peter Alex and Timms, Daniel Lee and Cohn, William E. and Lim, Einly (2018) Pulsatile operation of a continuous-flow right ventricular assist device (RVAD) to improve vascular pulsatility. PLoS ONE, 13 (4). e0195975. ISSN 1932-6203

Ng, Boon Chiang and Salamonsen, Robert F. and Gregory, Shaun D. and Stevens, Michael C. and Wu, Yi and Mansouri, Mahdi and Lovell, Nigel H. and Lim, Einly (2018) Application of multiobjective neural predictive control to biventricular assistance using dual rotary blood pumps. Biomedical Signal Processing and Control, 39. pp. 81-93. ISSN 1746-8094

Ng, Wee Lit and Rifat, Ahmmed A. and Wong, Wei Ru and Mahdiraji, Ghafour Amouzad and Adikan, Faisal Rafiq Mahamd (2018) A Novel Diamond Ring Fiber-Based Surface Plasmon Resonance Sensor. Plasmonics, 13 (4). pp. 1165-1170. ISSN 1557-1955

Nguyen, T. Sang and Hoang, Ngoc Ha and Hussain, Mohd Azlan (2018) Tracking error plus damping injection control of non-minimum phase processes. IFAC-PapersOnLine, 51 (18). pp. 643-648. ISSN 2405-8963

Norizan, Nurul Alina Afifi and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Yahaya, Hafizal and Ahmad, Fauzan and Harun, Sulaiman Wadi (2018) Q-switched erbium doped fiber laser incorporating zinc oxide in polyvinyl alcohol as passive saturable absorber. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-7). pp. 27-31. ISSN 2180-1843

O

Olatomiwa, Lanre and Blanchard, Richard and Mekhilef, Saad and Akinyele, Daniel (2018) Hybrid renewable energy supply for rural healthcare facilities: An approach to quality healthcare delivery. Sustainable Energy Technologies and Assessments, 30. pp. 121-138. ISSN 2213-1388

Ong, Seng Kuan and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Ling, Tung Chai (2018) Valorization of Wastes from Power Plant, Steel-Making and Palm Oil Industries as Partial Sand Substitute in Concrete. Waste and Biomass Valorization, 9 (9). pp. 1645-1654. ISSN 1877-2641

Ong, Zhi Chao and Lim, Hong Cheet and Brandt, Anders (2018) Automated impact device with non-synchronous impacts: a practical solution for modal testing during operation. Journal of Zhejiang University-SCIENCE A, 19 (6). pp. 452-460. ISSN 1673-565X

Ong, Zhi Chao and Seet, Y.C. and Khoo, Shin Yee and Noroozi, Siamak (2018) Development of an economic wireless human motion analysis device for quantitative assessment of human body joint. Measurement, 115. pp. 306-315. ISSN 0263-2241

Onn, Chiu Chuen and Mohd, Nuruol Syuhadaa and Yuen, Choon Wah and Loo, Siaw Chuing and Koting, Suhana and Abd Rashid, Ahmad Faiz and Karim, Mohamed Rehan and Yusoff, Sumiani (2018) Greenhouse gas emissions associated with electric vehicle charging: The impact of electricity generation mix in a developing country. Transportation Research Part D: Transport and Environment, 64. pp. 15-22. ISSN 1361-9209

Oon, Cheen Sean and Amiri, Ahmad and Chew, Bee Teng and Kazi, Salim Newaz and Shaw, Andy and Al-Shamma'a, Ahmed (2018) Increase in convective heat transfer over a backward-facing step immersed in a water-based tio2 nanofluid. Heat Transfer Research, 49 (15). pp. 1419-1429. ISSN 1064-2285

Othman, Faridah and Chowdhury, Md Sadek Uddin and Wan Jaafar, Wan Zurina and Mohammad Faresh, E.M. and Shirazi, Sharif Moniruzzaman (2018) Assessing Risk and Sources of Heavy Metals in a Tropical River Basin: A Case Study of the Selangor River, Malaysia. Polish Journal of Environmental Studies, 27 (4). pp. 1659-1671. ISSN 1230-1485

Othman, Nurul Aida Farhana and Hatta, Sharifah Fatmadiana Wan Muhamad and Soin, Norhayati (2018) Impact of Channel, Stress-Relaxed Buffer, and S/D Si1−xGe x Stressor on the Performance of 7-nm FinFET CMOS Design with the Implementation of Stress Engineering. Journal of Electronic Materials, 47 (4). pp. 2337-2347. ISSN 0361-5235

P

Pakalapati, Harshini and Arumugasamy, Senthil Kumar and Jewaratnam, Jegalakshimi and Wong, Yong Jie and Khalid, Mohammad (2018) Parametric optimization of polycaprolactone synthesis catalysed by Candida antarctica lipase B using response surface methodology. Biopolymers, 109 (12). e23240. ISSN 0006-3525

Pang, Yean Ling and Tee, Su Fang and Lim, Steven and Abdullah, Ahmad Zuhairi and Ong, Hwai Chyuan and Wu, Chien Hou and Chong, Woon Chan and Mohammadu, Abdul Wahab and Mahmoudi, Ebrahim (2018) Enhancement of photocatalytic degradation of organic dyes using ZnO decorated on reduced graphene oxide (rGO). Desalination and Water Treatment, 108. pp. 311-321. ISSN 1944-3994

Poon, H.M and Ng, H.K. and Gan, S. and Chong, Wen Tong (2018) Development of a reduced biodiesel surrogate fuel model for multi- dimensional CFD simulations. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Pouran, Shima Rahim and Bayrami, Abolfazl and Shafeeyan, Mohammad Saleh and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2018) A Comparative Study on a Cationic Dye Removal through Homogeneous and Heterogeneous Fenton Oxidation Systems. Acta Chimica Slovenica, 65 (1). pp. 166-171. ISSN 1318-0207

Pourshahrestani, Sara and Kadri, Nahrizul Adib and Zeimaran, Ehsan and Gargiulo, Nicola and Samuel, Shani and Naveen, Sangeetha Vasudevaraj and Hasikin, Khairunnisa and Kamarul, Tunku and Towler, Mark Robert (2018) Comparative efficacy of hemorrhage control of a novel mesoporous bioactive glass versus two commercial hemostats. Biomedical Materials, 13 (2). 025020. ISSN 1748-6041

Pourzolfaghar, Hamed and Abnisa, Faisal and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2018) Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review. Journal of Analytical and Applied Pyrolysis, 133. pp. 117-127. ISSN 0165-2370

Putri, Yulia Eka and Said, Suhana Mohd and Refinel, Refinel and Ohtaki, Michitaka and Syukri, Syukri (2018) Low Thermal Conductivity of RE-Doped SrO(SrTiO3)1 Ruddlesden Popper Phase Bulk Materials Prepared by Molten Salt Method. Electronic Materials Letters, 14 (5). pp. 556-562. ISSN 1738-8090

Q

Quazi, Moinuddin Mohammed and Ishak, Mahadzir and Arslan, Ahmed and Bashir, Muhammad Nasir and Ali, Imran (2018) Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy. Journal of Adhesion Science and Technology, 32 (6). pp. 625-641. ISSN 0169-4243

Quazi, Moinuddin Mohammed and Ishak, Mahadzir and Arslan, Ahmed and Fazal, M.A. and Yusof, Farazila and Sazzad, B.S. and Bashir, Muhammad Nasir and Jamshaid, Muhammad (2018) Mechanical and tribological performance of a hybrid MMC coating deposited on Al–17Si piston alloy by laser composite surfacing technique. RSC Advances, 8 (13). pp. 6858-6869. ISSN 2046-2069

R

Rafieerad, Ali Reza and Bushroa, Abdul Razak and Amiri, Ahmad and Gopinath, Venkatraman and Sookhakian, Mehran and Baradaran, Saeid and Rafieerad, M. and Saber-Samandari, Saeed and Vadivelu, Jamuna (2018) Large-scale hybrid silver nanowall-reduced graphene oxide biofilm: A novel morphology by facile electrochemical deposition. Surface and Coatings Technology, 347. pp. 297-303. ISSN 0257-8972

Rafieerad, Ali Reza and Bushroa, Abdul Razak and Amiri, Ahmad and Kalaiselvam, Kaveena and Vellasamy, Kumutha Malar and Vadivelu, Jamuna (2018) Antibacterial biocompatible arginine functionalized mono-layer graphene: No more risk of silver toxicity. Journal of Hazardous Materials, 360. pp. 132-140. ISSN 0304-3894

Rafieerad, Ali Reza and Bushroa, Abdul Razak and Banihashemian, S.M. and Amiri, Ahmad (2018) Not-yet-designed multilayer Nb/HA/MWCNT-Au/Se/AuNPs and NbO2/HA/GO/Se biocomposites coated Ti6Al7Nb implant. Materials Today Communications, 15. pp. 294-308. ISSN 2352-4928

Rafieerad, Ali Reza and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Amiri, Ahmad and Yusof, Farazila and Vadivelu, Jamuna and Basirun, Wan Jefrey (2018) Anodic pine cone-like WO3/MoO3/TiO2 film with well-defined nanoflakes on Ti–6Al–7Nb implant. Journal of the Australian Ceramic Society, 54 (1). pp. 129-137. ISSN 2510-1560

Raghavendra, U. and Gudigar, Anjan and Maithri, Mangalore and Gertych, Arkadiusz and Meiburger, Kristen Mariko and Yeong, Chai Hong and Madla, Chakri and Kongmebhol, Pailin and Molinari, Filippo and Ng, Kwan Hoong and Acharya, U. Rajendra (2018) Optimized multi-level elongated quinary patterns for the assessment of thyroid nodules in ultrasound images. Computers in Biology and Medicine, 95. pp. 55-62. ISSN 0010-4825

Rahim Pouran, Shima and Bayrami, Abolfazl and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan and Shafeeyan, Mohammad Saleh and Khataee, Alireza (2018) Comprehensive study on the influence of molybdenum substitution on characteristics and catalytic performance of magnetite nanoparticles. Research on Chemical Intermediates, 44 (2). pp. 883-900. ISSN 0922-6168

Rahimi, Zhoobin and Mohd Shafri, Helmi Zulhaidi and Norman, Masayu (2018) A GNSS-based weather forecasting approach using Nonlinear Auto Regressive Approach with Exogenous Input (NARX). Journal of Atmospheric and Solar-Terrestrial Physics, 178. pp. 74-84. ISSN 1364-6826

Rahman, M.F.A. and Zhalilah, M.Z. and Latiff, A.A. and Rosol, A.H.A. and Lokman, M.Q. and Bushroa, Abdul Razak and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Pure antimony film as saturable absorber for Q-switched erbium-doped fiber laser. Journal of Modern Optics, 65 (7). pp. 811-817. ISSN 0950-0340

Rahman, Mir Toufikur and Othman, Mohamadariff and Mokhlis, Hazlie and Muhammad, Munir Zuhdin and Bouchekara, Houssem (2018) Optimal fixed charge–rate coordination of plug-in electric vehicle incorporating capacitor and OLTC switching to minimize power loss and voltage deviation. IEEJ Transactions on Electrical and Electronic Engineering, 13 (7). pp. 963-970. ISSN 1931-4973

Rahman, Mohd Fauzi Ab and Dhar, Anirban and Das, Shyamal and Dutta, Debjit and Paul, Mukul Chandra and Rusdi, Muhammad Farid Mohd and Latiff, Anas Abdul and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) An 8 cm long holmium-doped fiber saturable absorber for Q-switched fiber laser generation at 2-µm region. Optical Fiber Technology, 43. pp. 67-71. ISSN 1068-5200

Rahman, Mohd Fauzi Ab and Latiff, Anas Abdul and Rosol, Ahmad Haziq Aiman and Dimyati, Kaharudin and Wang, Peng Fei and Harun, Sulaiman Wadi (2018) Ultrashort Pulse Soliton Fiber Laser Generation With Integration of Antimony Film Saturable Absorber. Journal of Lightwave Technology, 36 (16). pp. 3522-3527. ISSN 0733-8724

Rahman, Mohd Fauzi Ab and Latiff, Anas Abdul and Rusdi, Muhammad Farid Mohd and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Q-switched ytterbium-doped fiber laser via a thulium-doped fiber saturable absorber. Applied Optics, 57 (22). pp. 6510-6515. ISSN 1559-128X

Rahman, Mohd Fauzi Ab and Latiff, Anas Abdul and Zaidi, Umi Zhalilah Mohd and Rusdi, Muhammad Farid Mohd and Rosol, Ahmad Haziq Aiman and Bushroa, Abdul Razak and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Q-switched and mode-locked thulium-doped fiber laser with pure Antimony film Saturable absorber. Optics Communications, 421. pp. 99-104. ISSN 0030-4018

Rahman, Nurhaslina Abd and Ibrahim, Fatimah and Aeinehvand, Mohammad Mahdi and Yusof, Rohana and Madou, Marc J. (2018) A microfluidic Lab-on-a-Disc (LOD) for antioxidant activities of plant extracts. Micromachines, 9 (4). p. 140. ISSN 2072-666X

Rahman, Siti Hajar Abd and Soin, Norhayati and Ibrahim, Fatimah (2018) Load deflection analysis of rectangular graphene diaphragm for MEMS intracranial pressure sensor applications. Microsystem Technologies, 24 (2). pp. 1147-1152. ISSN 0946-7076

Raihan, Ovik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Rozali, Shaifulazuar and Long, Bui Duc and Kimura, Kaoru and Tobita, Kazuki and Fitriani, - and Salleh, Faiz and Ali Bashir, Mohamed Bashir (2018) Parametric analysis of ball milling condition on thermoelectric performance of Bi0.6FeCo3Sb12 skutterudite. Materials Research Express, 5 (10). p. 105008. ISSN 2053-1591

Rajendran, Jagadheswaran and Hamid, Sofiyah Sal and Kunhi Mohd, Shukri Korakkottil and Abdullah, Mohd Zaid and Ramiah, Harikrishnan and Kumar, Narendra (2018) An Integrated Linearization Technique for GaAs Bipolar WCDMA Power Amplifier. Current Science, 114 (2). pp. 308-313. ISSN 0011-3891

Ramasamy, Ramesh and Ibrahim, Zainah and Chai, Hwa Kian (2018) Screening method for platform conductor integrity assessment for life extension prioritisation. Marine Structures, 58. pp. 136-153. ISSN 0951-8339

Ramesh, Singh and Loo, Zi Zhen and Tan, Chou Yong and Chew, Wai Jin Kelvin and Ching, Yern Chee and Tarlochan, Faris and Chandran, Hari and Krishnasamy, Sivakumar and Bang, Le Thi and Sarhan, Ahmed Aly Diaa Mohammed (2018) Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications. Ceramics International, 44 (9). pp. 10525-10530. ISSN 0272-8842

Ramesh, Singh and Sara Lee, K.Y. and Tan, Chou Yong and Wong, Yew Hoong and Alengaram, Ubagaram Johnson and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sutharsini, U. and Sarhan, Ahmed Aly Diaa Mohammed (2018) Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics. Ceramics International, 44 (16). pp. 19639-19645. ISSN 0272-8842

Ramesh, Singh and Zulkifli, Nurin Wahidah Mohd and Tan, Chou Yong and Wong, Yew Hoong and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sopyan, Iis and Bang, Le Thi and Sarhan, Ahmed Aly Diaa Mohammed (2018) Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International, 44 (8). pp. 8922-8927. ISSN 0272-8842

Ramezani, Mohammadkazem and Purbolaksono, Judha and Andriyana, Andri and Ramesh, Singh and Mardi, Noor Azizi (2018) Analysis of surface cracks in round bars using dual boundary element method. Engineering Analysis with Boundary Elements, 93. pp. 112-123. ISSN 0955-7997

Ramezani, Mohammadkazem and Purbolaksono, Judha and Andriyana, Andri and Ramesh, Singh and Putra, Ichsan Setya (2018) Empirical solutions for stress intensity factors of a surface crack in a solid cylinder under pure torsion. Engineering Fracture Mechanics, 193. pp. 122-136. ISSN 0013-7944

Ramli, Nurul Ain and Hashim, Nur Awanis and Aroua, Mohamed Kheireddine (2018) Prediction of CO2/O2 absorption selectivity using supported ionic liquid membranes (SILMs) for gas–liquid membrane contactor. Chemical Engineering Communications, 205 (3). pp. 295-310. ISSN 0098-6445

Reddy, A.N.R. and Saleh, A.A. and Islam, Md Saiful and Hamdan, Sinin and Rahman, Md Rezaur and Masjuki, Haji Hassan (2018) Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10 (1). 013103. ISSN 1941-7012

Reddy, Pinninty Harshavardhan and Rahman, Muhammad Fauzi Ab and Paul, Mukul Chandra and Latiff, Anas Abdul and Rosol, Ahmad Haziq Aiman and Das, Shyamal and Dhar, Anirban and Bhadra, Shyamal Kumar and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Titanium dioxide doped fiber as a new saturable absorber for generating mode-locked erbium doped fiber laser. Optik, 158. pp. 1327-1333. ISSN 0030-4026

Rehman, Muhammad Habib ur and Ahmed, Ejaz and Yaqoob, Ibrar and Hashem, Ibrahim Abaker Targio and Imran, Muhammad and Ahmad, Shafiq (2018) Big Data Analytics in Industrial IoT Using a Concentric Computing Model. IEEE Communications Magazine, 56 (2). pp. 37-43. ISSN 0163-6804

Rehman, Sardar Kashif Ur and Ibrahim, Zainah and Jameel, Mohammad and Memon, Shazim Ali and Javed, Muhammad Faisal and Aslam, Muhammad and Mehmood, Kashif and Nazar, Sohaib (2018) Assessment of Rheological and Piezoresistive Properties of Graphene based Cement Composites. International Journal of Concrete Structures and Materials, 12 (1). p. 64. ISSN 1976-0485

Rifai, Achmad P. and Nguyen, Huu Tho and Aoyama, Hideki and Md Dawal, Siti Zawiah and Masruroh, Nur Aini (2018) Non-dominated sorting biogeography-based optimization for bi-objective reentrant flexible manufacturing system scheduling. Applied Soft Computing, 62. pp. 187-202. ISSN 1568-4946

Rifat, Ahmmed A. and Haider, Firoz and Ahmed, Rajib Ali and Mahdiraji, Ghafour Amouzad and Adikan, Faisal Rafiq Mahamd and Miroshnichenko, Andrey E. (2018) Highly sensitive selectively coated photonic crystal fiber-based plasmonic sensor. Optics Letters, 43 (4). pp. 891-894. ISSN 0146-9592

Rizman, Zairi Ismael and Arof, Hamzah and Latiff, Anas Abdul and Apsari, Retna and Harun, Sulaiman Wadi (2018) Tunable Q-switched erbium-doped fiber laser using nickel oxide saturable absorber. Nonlinear Optics, Quantum Optics, 49 (3-4). pp. 311-319. ISSN 1543-0537

Rizwan, Muhammad and Hamdi, Mohd and Basirun, Wan Jefrey and Kondoh, Katsuyoshi and Umeda, Junko (2018) Low pressure spark plasma sintered hydroxyapatite and Bioglass® composite scaffolds for bone tissue repair. Ceramics International, 44 (18). pp. 23052-23062. ISSN 0272-8842

Rosdin, Raja Zaimas Raja and Arof, Hamzah and Apsari, Retna and Harun, Sulaiman Wadi (2018) Q-switched erbium-doped fiber laser using thulium fiber saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 157-165. ISSN 1543-0537

Roushenas, Peiman and Ong, Zhi Chao and Ismail, Zubaidah and Majidnia, Zohreh and Ang, Bee Chin and Asadsangabifard, Mohammadjavad and Onn, Chiu Chuen and Tam, Jun Hui (2018) Operational parameters effects on photocatalytic reactors of wastewater pollutant: a review. Desalination and Water Treatment, 120. pp. 109-118. ISSN 1944-3994

Rowshon, Md Kamal and Iqbal, Mohammed Cairul and Mojid, Md Abdul and Amin, Mohd Soom Mohd and Lai, Sai Hin (2018) Optimization of equitable irrigation water delivery for a large-scale rice irrigation scheme. International Journal of Agricultural and Biological Engineering, 11 (5). pp. 160-166. ISSN 1934-6344

Rusdi, Muhammad Farid Mohd and Harun, Sulaiman Wadi and Yasin, Moh (2018) A mode-locked thulium-doped fiber laser with multiple wavelength output based on a nonlinear loop mirror. Nonlinear Optics, Quantum Optics, 48 (4). pp. 305-312. ISSN 1543-0537

Rusdi, Muhammad Farid Mohd and Mahyuddin, Mohamad Badrol Hisyam and Latiff, Anas Abdul and Ahmad, Harith and Harun, Sulaiman Wadi (2018) Q-Switched Erbium-Doped Fiber Laser Using Cadmium Selenide Coated onto Side-Polished D-Shape Fiber as Saturable Absorber. Chinese Physics Letters, 35 (10). p. 104201. ISSN 0256-307X

S

Sabeur, Nassereddine and Mekhilef, Saad and Masaoud, Ammar (2018) A Simplified Time-Domain Modulation Scheme-Based Maximum Boost Control for Three-Phase Quasi-Z Source Inverters. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6 (2). pp. 760-769. ISSN 2168-6777

Sadeq, Sinan Abdulhameed and Al-Hayali, Sarah Kadhim and Harun, Sulaiman Wadi and Al-Janabi, Abdulhadi (2018) Copper oxide nanomaterial saturable absorber as a new passive Q-switcher in erbium-doped fiber laser ring cavity configuration. Results in Physics, 10. pp. 264-269. ISSN 2211-3797

Sadeq, Sinan Abdulhameed and Harun, Sulaiman Wadi and Al-Janabi, Abdul Hadi (2018) Ultrashort pulse generation with an erbium-doped fiber laser ring cavity based on a copper oxide saturable absorber. Applied Optics, 57 (18). pp. 5180-5185. ISSN 1559-128X

Sado, Fatai and Yap, Hwa Jen and Ghazilla, Raja Ariffin Raja and Ahmad, Norhafizan (2018) Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented Kalman filter. PLoS ONE, 13 (7). e0200193. ISSN 1932-6203

Sadri, Rad and Hosseini, Maryam and Kazi, Salim Newaz and Bagheri, Samira and Abdelrazek, Ali H. and Ahmadi, Goodarz and Zubir, Mohd Nashrul Mohd and Ahmad, Roslina and Abidin, Nor Ishida Zainal (2018) A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties. Journal of Colloid and Interface Science, 509. pp. 140-152. ISSN 0021-9797

Sadri, Rad and Mallah, Abdul Rahman and Hosseini, Maryam and Ahmadi, Goodarz and Kazi, Salim Newaz and Dabbagh, Ali and Yeong, Chai Hong and Ahmad, Roslina and Yaakup, Nur Adura (2018) CFD modeling of turbulent convection heat transfer of nanofluids containing green functionalized graphene nanoplatelets flowing in a horizontal tube: Comparison with experimental data. Journal of Molecular Liquids, 269. pp. 152-159. ISSN 0167-7322

Sahamir, Shahrir Razey and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Mahmood, Mohamand Syafie and Kamarudin, Muhammad Akmal and Moutanabbir, Oussama (2018) Studies on relation between columnar order and electrical conductivity in HAT6 discotic liquid crystals using temperature-dependent Raman spectroscopy and DFT calculations. Liquid Crystals, 45 (4). pp. 522-535. ISSN 0267-8292

Saharuddin, Nur Zawani and Abidin, Izham Zainal and Mokhlis, Hazlie (2018) Discrete Evolutionary Programming for Network Splitting Strategy: Different Mutation Technique. Indonesian Journal of Electrical Engineering and Computer Science, 12 (1). pp. 261-268. ISSN 2502-4752

Saharuddin, Nur Zawani and Abidin, Izham Zainal and Mokhlis, Hazlie and Abdullah, Abdul Rahim and Naidu, Kanendra (2018) A power system network splitting strategy based on contingency analysis. Energies, 11 (2). p. 1104. ISSN 1996-1073

Saidin, Norazlina and Idris, N.F. and Amaluddin, M.N. and Irawati, Ninik and Ralib, Ahmad Aini Md and Harun, Sulaiman Wadi (2018) Microfiber-based sensor for measuring uric acid concentrations. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-7). pp. 49-52. ISSN 2180-1843

Salam, Mohammed Abdus and Safiuddin, Md. and Jumaat, Mohd Zamin (2018) Durability Indicators for Sustainable Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash. Sustainability, 10 (7). p. 2345. ISSN 2071-1050

Salih, Ethar Yahya and Sabri, Mohd Faizul Mohd and Hussein, Mohd Zobir and Sulaiman, Khaulah and Said, Suhana Mohd and Saifullah, Bullo and Bashir, Mohamed Bashir Ali (2018) Structural, optical and electrical properties of ZnO/ZnAl2O4 nanocomposites prepared via thermal reduction approach. Journal of Materials Science, 53 (1). pp. 581-590. ISSN 0022-2461

Salih, Ethar Yahya and Sabri, Mohd Faizul Mohd and Sulaiman, Khaulah and Hussein, Mohd Zobir and Said, Suhana Mohd and Usop, Rohida and Salleh, Faiz and Ali Bashir, Mohamed Bashir (2018) Thermal, structural, textural and optical properties of ZnO/ZnAl2O4 mixed metal oxide-based Zn/Al layered double hydroxide. Materials Research Express, 5 (11). p. 116202. ISSN 2053-1591

Salleh, M. Zulhaziman M. and Arya, Aditya and Hadj-Kali, Mohamed Kamel and Hizaddin, Hanee Farzana and Hashim, Mohd Ali (2018) Extraction of nitrogen compounds from model fuel using 1-ethyl-3-methylimidazolium methanesulfonate. Separation and Purification Technology, 196. pp. 61-70. ISSN 1383-5866

Salleh, M. Zulhaziman M. and Hadj-Kali, Mohamed K. and Hashim, Mohd Ali and Mulyono, Sarwono (2018) Ionic liquids for the separation of benzene and cyclohexane – COSMO-RS screening and experimental validation. Journal of Molecular Liquids, 266. pp. 51-61. ISSN 0167-7322

Sampath Udeni Gunathilake, Thennakoon M. and Ching, Yern Chee and Chuah, Cheng Hock and Illias, Hazlee Azil and Ching, Kuan Yong and Ramesh, Singh and Nai-Shang, Liou (2018) Influence of a nonionic surfactant on curcumin delivery of nanocellulose reinforced chitosan hydrogel. International Journal of Biological Macromolecules, 118 (Pt.A). pp. 1055-1064. ISSN 0141-8130

Sangaran, Pragash and Kumar, Narendra and Rajendran, Jagadheswaran and Grebennikov, Andrei (2018) A high gain 10 watts wideband distributed power amplifier for two way radio system. Microelectronics International, 35 (1). pp. 24-32. ISSN 1356-5362

Sarraf, Masoud and Dabbagh, Ali and Bushroa, Abdul Razak and Mahmoodian, Reza and Nasiri-Tabrizi, Bahman and Hosseini, Hamid Reza Madaah and Saber-Samandari, Saeed and Abu Kasim, Noor Hayaty and Abdullah, Hadijah and Sukiman, Nazatul Liana (2018) Highly-ordered TiO 2 nanotubes decorated with Ag 2 O nanoparticles for improved biofunctionality of Ti6Al4V. Surface and Coatings Technology, 349. pp. 1008-1017. ISSN 0257-8972

Sarraf, Masoud and Dabbagh, Ali and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Hosseini, Hamid Reza Madaah and Saber-Samandari, Saeed and Abu Kasim, Noor Hayaty and Lum, Kah Yean and Sukiman, Nazatul Liana (2018) Silver oxide nanoparticles-decorated tantala nanotubes for enhanced antibacterial activity and osseointegration of Ti6Al4V. Materials & Design, 154. pp. 28-40. ISSN 0264-1275

Saw, Lip Huat and Ho, Li Wen and Yew, Ming Chian and Yusof, Farazila and Pambudi, Nugroho Agung and Ng, Tan Ching and Yew, Ming Kun (2018) Sensitivity analysis of drill wear and optimization using Adaptive Neuro fuzzy –genetic algorithm technique toward sustainable machining. Journal of Cleaner Production, 172. pp. 3289-3298. ISSN 0959-6526

Saw, Lip Huat and Poon, Hiew Mun and Thiam, Hui San and Cai, Zuansi and Chong, Wen Tong and Pambudi, Nugroho Agung and King, Yeong Jin (2018) Novel thermal management system using mist cooling for lithium-ion battery packs. Applied Energy, 223. pp. 146-158. ISSN 0306-2619

Sebtahmadi, Seyed Sina and Azad, Hanieh Borhan and Kaboli, S. Hr. Aghay and Islam, Md. Didarul and Mekhilef, Saad (2018) A PSO-DQ Current Control Scheme for Performance Enhancement of Z-Source Matrix Converter to Drive IM Fed by Abnormal Voltage. IEEE Transactions on Power Electronics, 33 (2). pp. 1666-1681. ISSN 0885-8993

See, Tiam You and Yusoff, Rozita and Chan, Chung-Hung and Ngoh, Gek Cheng (2018) A solid-state microwave method to disrupt biomass microstructure for natural product extraction. Food and Bioproducts Processing, 109. pp. 98-106. ISSN 0960-3085

Seyedmahmoudian, Mehdi and Jamei, Elmira and Thirunavukkarasu, Gokul and Tey, Kok Soon and Mortimer, Michael and Horan, Ben and Stojcevski, Alex and Mekhilef, Saad (2018) Short-Term Forecasting of the Output Power of a Building-Integrated Photovoltaic System Using a Metaheuristic Approach. Energies, 11 (5). p. 1260. ISSN 1996-1073

Seyedmahmoudian, Mehdi and Tey, Kok Soon and Jamei, Elmira and Thirunavukkarasu, Gokul and Horan, Ben and Mekhilef, Saad and Stojcevski, Alex (2018) Maximum Power Point Tracking for Photovoltaic Systems under Partial Shading Conditions Using Bat Algorithm. Sustainability, 10 (5). p. 1347. ISSN 2071-1050

Shaari, Ida Hasni and Abu Osman, Noor Azuan and Shasmin, Hanie Nadia (2018) Interface Pressure of Lycra Orthosis at Different Postures in Children with Cerebral Palsy (CP). Sains Malaysiana, 47 (4). pp. 763-771. ISSN 0126-6039

Shafigh, Payam and Lee, Jin Chai and Mahmud, Hilmi and Nomeli, Mohammad A. (2018) A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes. Journal of Building Engineering, 15. pp. 252-260. ISSN 2352-7102

Shafigh, Payam and Salleh, Salmaliza and Ghafari, Hafez and Mahmud, Hilmi (2018) Oil palm shell as an agricultural solid waste in artificial lightweight aggregate concrete. European Journal of Environmental and Civil Engineering, 22 (2). pp. 165-180. ISSN 2116-7214

Shah, S.N.R. and Ramli Sulong, Nor Hafizah and El-Shafie, Ahmed (2018) New approach for developing soft computational prediction models for moment and rotation of boltless steel connections. Thin-Walled Structures, 133. pp. 206-215. ISSN 0263-8231

Shahnazar, Sheida and Bagheri, Samira and TermehYousefi, Amin and Mehrmashhadi, Javad and Sayuti, Mohd and Kadri, Nahrizul Adib (2018) Structure, mechanism, and performance evaluation of natural gas hydrate kinetic inhibitors. Reviews in Inorganic Chemistry, 38 (1). pp. 1-19. ISSN 0193-4929

Shanbedi, Mehdi and Amiri, Ahmad and Zeinali Heris, Saeed and Eshghi, Hossein and Yarmand, Hooman (2018) Effect of magnetic field on thermo-physical and hydrodynamic properties of different metals-decorated multi-walled carbon nanotubes-based water coolants in a closed conduit. Journal of Thermal Analysis and Calorimetry, 131 (2). pp. 1089-1106. ISSN 1388-6150

Shapril, Nur'ain Nadia and Ming, Chin Kim and Said, Suhana Mohd and Johan, Mohd Rafie (2018) Optimization of silver nanodendrites for surface enhanced Raman spectroscopy (SERS) in an acidic environment. Optik, 164. pp. 297-302. ISSN 0030-4026

Shazali, Siti Shafiah and Amiri, Ahmad and Zubir, Mohd Nashrul Mohd and Rozali, Shaifulazuar and Zabri, Mohd Zakuan and Sabri, Mohd Faizul Mohd (2018) Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents. Current Applied Physics, 18 (2). pp. 209-219. ISSN 1567-1739

Shazali, Siti Shafiah and Amiri, Ahmad and Zubir, Mohd Nashrul Mohd and Rozali, Shaifulazuar and Zabri, Mohd Zakuan and Sabri, Mohd Faizul Mohd (2018) Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: dispersion, stability in solvents and thermophysical performances. Materials Research Express, 5 (3). 035042. ISSN 2053-1591

Shazali, Siti Shafiah and Amiri, Ahmad and Zubir, Mohd Nashrul Mohd and Rozali, Shaifulazuar and Zabri, Mohd Zakuan and Sabri, Mohd Faizul Mohd and Soleymaniha, Mohammadreza (2018) Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents. Materials Chemistry and Physics, 206. pp. 94-102. ISSN 0254-0584

Shazali, Siti Shafiah and Rozali, Shaifulazuar and Amiri, Ahmad and Zubir, Mohd Nashrul Mohd and Sabri, Mohd Faizul Mohd and Zabri, Mohd Zakuan (2018) Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid. Materials Chemistry and Physics, 212. pp. 363-371. ISSN 0254-0584

Shezan, S.A. and Al-Mamoon, Abdullah and Hew, Wooi Ping (2018) Performance investigation of an advanced hybrid renewable energy system in Indonesia. Environmental Progress and Sustainable Energy, 37 (4). pp. 1424-1432. ISSN 1944-7442

Shukri, Ahmad Azim and Shamsudin, Mohd Fazaulnizam and Ibrahim, Zainah and Alengaram, Ubagaram Johnson and Hashim, Huzaifa (2018) Simulating Intermediate Crack Debonding on RC Beams Strengthened with Hybrid Methods. Latin American Journal of Solids and Structures, 15 (9). e78. ISSN 1679-7817

Siddique, Istiaq Jamil and Bahar, Rubina and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994

Silitonga, Arridina Susan and Masjuki, Haji Hassan and Ong, Hwai Chyuan and Sebayang, Abdi Hanra and Dharma, Surya and Kusumo, Fitranto and Siswantoro, Joko and Milano, Jassinnee and Daud, Khairil and Mahlia, Teuku Meurah Indra and Chen, Wei Hsin and Sugiyanto, Bambang (2018) Evaluation of the engine performance and exhaust emissions of biodiesel-bioethanol-diesel blends using kernel-based extreme learning machine. Energy, 159. pp. 1075-1087. ISSN 0360-5442

Singh, Gurbinder and Haseeb, A.S. Md. Abdul (2018) Application of laser heating and its effects on bonding strengths for varied copper wire purity levels. Journal of Laser Applications, 30 (2). 022004. ISSN 1042-346X

Singh, Jasbir and Ching, Yern Chee and Abdullah, Luqman Chuah and Ching, Kuan Yong and Razali, Shaifulazuar and Gan, Seng Neon (2018) Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology. Polymers, 10 (3). p. 338. ISSN 2073-4360

Singh, Jasbir and Ching, Yern Chee and Liu, De and Ching, Kuan and Razali, Shaifulazuar and Gan, Seng Neon (2018) Effects of PTFE Micro-Particles on the Fiber-Matrix Interface of Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites. Materials, 11 (11). p. 2164. ISSN 1996-1944

Soleymaniha, Mohammadreza and Amiri, Ahmad and Shanbedi, Mehdi and Chew, Bee Teng and Wongwises, Somchai (2018) Water-based graphene quantum dots dispersion as a high-performance long-term stable nanofluid for two-phased closed thermosyphons. International Communications in Heat and Mass Transfer, 95. pp. 147-154. ISSN 0735-1933

Soo, Joshua Zheyan and Ang, Bee Chin and Ong, Boon Hoong (2018) Influence of calcination on the morphology and crystallinity of titanium dioxide nanofibers towards enhancing photocatalytic dye degradation. Materials Research Express, 6 (2). 025039. ISSN 2053-1591

Soon, Foo Chong and Khaw, Hui Ying and Chuah, Joon Huang and Kanesan, Jeevan (2018) Hyper-parameters optimisation of deep CNN architecture for vehicle logo recognition. IET Intelligent Transport Systems, 12 (8). pp. 939-946. ISSN 1751-956X

Soong, Ming Foong and Ramli, Rahizar and Saifizul, Ahmad Abdullah and Zamzamzadeh, Mahdieh (2018) Applicability of A rotary eddy current damper in passenger vehicle suspension with parallel inerter. International Journal of Engineering & Technology, 7 (3.17). pp. 76-84. ISSN 2227-524X

Sukumar, Shivashankar and Mokhlis, Hazlie and Mekhilef, Saad and Karimi, Mazaher and Raza, Safdar (2018) Ramp-rate control approach based on dynamic smoothing parameter to mitigate solar PV output fluctuations. International Journal of Electrical Power & Energy Systems, 96. pp. 296-305. ISSN 0142-0615

Sun, Chong and Lam, Wei Haur and Cui, Yonggang and Zhang, Tianming and Jiang, Jinxin and Guo, Jianhua and Ma, Yanbo and Wang, Shuguang and Tan, Teng Hwang and Chuah, Joon Huang and Lam, Su Shiung and Hamill, Gerard (2018) Empirical model for Darrieus-type tidal current turbine induced seabed scour. Energy Conversion and Management, 171. pp. 478-490. ISSN 0196-8904

T

Talbi, Billel and Krim, Fateh and Rekioua, Toufik and Mekhilef, Saad and Laib, Abdelbaset and Belaout, Abdesslam (2018) A high-performance control scheme for photovoltaic pumping system under sudden irradiance and load changes. Solar Energy, 159. pp. 353-368. ISSN 0038-092X

Talib, Dian Najihah Abu and Mokhlis, Hazlie and Abu Talip, Mohamad Sofian and Naidu, Kanendra and Suyono, Hadi (2018) Power System Restoration Planning Strategy Based on Optimal Energizing Time of Sectionalizing Islands. Energies, 11 (5). p. 1316. ISSN 1996-1073

Tam, Jun Hui and Ong, Zhi Chao and Ismail, Zubaidah and Ang, Bee Chin and Khoo, Shin Yee (2018) Inverse Identification of Composite Material Properties by using a Two-Stage Fourier Method. Experimental Mechanics, 58 (6). pp. 963-981. ISSN 0014-4851

Tam, Jun Hui and Ong, Zhi Chao and Ismail, Zubaidah and Ang, Bee Chin and Khoo, Shin Yee and Li, Wen L. (2018) Inverse identification of elastic properties of composite materials using hybrid GA-ACO-PSO algorithm. Inverse Problems in Science and Engineering, 26 (10). pp. 1432-1463. ISSN 1741-5977

Tan, Chin Hooi and Tan, Mei Sze and Chang, Siow Wee and Yap, Keem Siah and Yap, Hwa Jen and Wong, Shen Yuong (2018) Genetic algorithm fuzzy logic for medical knowledge-based pattern classification. Journal of Engineering Science and Technology, 13. pp. 242-258. ISSN 1823-4690

Tan, Chin Joo and Andriyana, Andri and Ang, Bee Chin and Chagnon, Grégory (2018) Inelastic deformation of highly aligned dry-spun thermoplastic polyurethane elastomer microfibres. Materials Research Express, 5 (12). p. 125301. ISSN 2053-1591

Tan, Kok Tong and Suhatril, Meldi and Razak, Hashim Abdul and Lu, Dagang (2018) Seismic Vulnerability of Low- and Mid-Rise Reinforced Concrete Buildings in Malaysia Designed by Considering Only Gravity Loads. Arabian Journal for Science and Engineering, 43 (4). pp. 1641-1654. ISSN 1319-8025

Tan, Li Kuo and Liew, Yih Miin and Lim, Einly and Abdul Aziz, Yang Faridah and Chee, Kok Han and McLaughlin, Robert A. (2018) Automatic localization of the left ventricular blood pool centroid in short axis cardiac cine MR images. Medical & Biological Engineering & Computing, 56 (6). pp. 1053-1062. ISSN 0140-0118

Tan, Li Kuo and McLaughlin, Robert A. and Lim, Einly and Abdul Aziz, Yang Faridah and Liew, Yih Miin (2018) Fully automated segmentation of the left ventricle in cine cardiac MRI using neural network regression. Journal of Magnetic Resonance Imaging, 48 (1). pp. 140-152. ISSN 1053-1807

Tan, Mei Sze and Chang, Siow Wee and Cheah, Phaik Leng and Yap, Hwa Jen (2018) Integrative machine learning analysis of multiple gene expression profiles in cervical cancer. PeerJ, 6. e5285. ISSN 2167-8359

Tan, Shiou Xuan and Ong, Hwai Chyuan and Lim, Steven and Pang, Yean Ling (2018) In situ reactive extraction of Jatropha curcas L. seeds assisted by ultrasound: Preliminary studies. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (14). pp. 1772-1779. ISSN 1556-7036

Tan, Yee Tong and Ngoh, Gek Cheng and Chua, Adeline Seak May (2018) Evaluation of fractionation and delignification efficiencies of deep eutectic solvents on oil palm empty fruit bunch. Industrial Crops and Products, 123. pp. 271-277. ISSN 0926-6690

Tang, Daniel Kuok Ho and Md Dawal, Siti Zawiah and Olugu, Ezutah Udoncy (2018) Actual safety performance of the Malaysian offshore oil platforms: Correlations between the leading and lagging indicators. Journal of Safety Research, 66. pp. 9-19. ISSN 0022-4375

Tang, Kuok Ho Daniel and Md Dawal, Siti Zawiah and Olugu, Ezutah Udoncy (2018) Integrating fuzzy expert system and scoring system for safety performance evaluation of offshore oil and gas platforms in Malaysia. Journal of Loss Prevention in the Process Industries, 56. pp. 32-45. ISSN 0950-4230

Tareen, Wajahat Ullah Khan and Mekhilef, Saad (2018) Three-Phase Transformerless Shunt Active Power Filter with Reduced Switch Count for Harmonic Compensation in Grid-Connected Applications. IEEE Transactions on Power Electronics, 33 (6). pp. 4868-4881. ISSN 0885-8993

Tee, Yun Lu and Loo, Mei Sze and Andriyana, Andri (2018) Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. International Journal of Fatigue, 110. pp. 115-129. ISSN 0142-1123

Teng, Kah Hou and Shaw, Andy and Ateeq, Muhammad and Al-Shamma'a, Ahmed and Wylie, Stephen and Kazi, Salim Newaz and Chew, Bee Teng and Kot, Patryk (2018) Design and implementation of a non-invasive real-time microwave sensor for assessing water hardness in heat exchangers. Journal of Electromagnetic Waves and Applications, 32 (7). pp. 797-811. ISSN 0920-5071

Teo, J.C. and Tan, Rodney H.G. and Mok, V.H. and Ramachandaramurthy, Vigna K. and Tan, Chia Kwang (2018) Impact of Partial Shading on the P-V Characteristics and the Maximum Power of a Photovoltaic String. Energies, 11 (7). p. 1860. ISSN 1996-1073

Teoh, Yew Heng and Masjuki, Haji Hassan and How, Heoy Geok and Kalam, Md. Abul and Yu, Kok Hwa and Alabdulkarem, Abdullah (2018) Effect of two-stage injection dwell angle on engine combustion and performance characteristics of a common-rail diesel engine fueled with coconut oil methyl esters-diesel fuel blends. Fuel, 234. pp. 227-237. ISSN 0016-2361

Tey, Kok Soon and Mekhilef, Saad and Seyedmahmoudian, Mehdi and Horan, Ben and Oo, Amanullah Than and Stojcevski, Alex (2018) Improved Differential Evolution-Based MPPT Algorithm Using SEPIC for PV Systems Under Partial Shading Conditions and Load Variation. IEEE Transactions on Industrial Informatics, 14 (10). pp. 4322-4333. ISSN 1551-3203

Thiha, A. and Ibrahim, Fatimah and Muniandy, S. and Dishaw, I.J. and Teh, S.J. and Thong, Kwai Lin and Leo, B.F. and Madou, M. (2018) All-carbon suspended nanowire sensors as a rapid highly-sensitive label-free chemiresistive biosensing platform. Biosensors and Bioelectronics, 107. pp. 145-152. ISSN 0956-5663

Toghroli, Ali and Suhatril, Meldi and Ibrahim, Zainah and Safa, Maryam and Shariati, Mahdi and Shamshirband, Shahaboddin (2018) Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam. Journal of Intelligent Manufacturing, 29 (8). pp. 1793-1801. ISSN 0956-5515

Touri, Maria and Moztarzadeh, Fathollah and Abu Osman, Noor Azuan and Dehghan, Mohammad Mehdi and Mozafari, Masoud (2018) 3D–printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival. Materials Science and Engineering: C, 84. pp. 236-242. ISSN 0928-4931

Tripathy, Ashis and Sharma, Priyaranjan and Sahoo, Narayan and Pramanik, Sumit and Abu Osman, Noor Azuan (2018) Moisture sensitive inimitable Armalcolite/PDMS flexible sensor: A new entry. Sensors and Actuators B: Chemical, 262. pp. 211-220. ISSN 0925-4005

U

Ubenthiran, Sutharsini and Thanihaichelvan, Murugathas and Ramesh, Singh (2018) Effect of Air and Argon Sintering Atmospheres on Properties and Hydrothermal Aging Resistance of Y-TZP Ceramics. Journal of Materials Engineering and Performance, 27 (7). pp. 3574-3580. ISSN 1059-9495

Uddin, Mohammad Borhan and Mekhilef, Saad and Ramasamy, Gobbi (2018) Compact wireless IPT system using a modified voltage-fed multi-resonant class EF2 inverter. Journal of Power Electronics, 18 (1). pp. 277-288. ISSN 1598-2092

Uddin, Muslem and Mekhilef, Saad and Rivera, Marco (2018) High Performance Modified Model Predictive Control of a Voltage Source Inverter. Electric Power Components and Systems, 46 (5). pp. 600-613. ISSN 1532-5008

Ur Rehman, Sardar Kashif and Ibrahim, Zainah and Memon, Shazim and Aunkor, Md Toasin Hossain and Faisal Javed, Muhammad and Mehmood, Kashif and Shah, Syed (2018) Influence of Graphene Nanosheets on Rheology, Microstructure, Strength Development and Self-Sensing Properties of Cement Based Composites. Sustainability, 10 (3). p. 822. ISSN 2071-1050

Usman, Hazrat and Ali, Hafiz Muhammad and Arshad, Adeel and Ashraf, Muhammad Junaid and Khushnood, Shahab and Janjua, Muhammad Mansoor and Kazi, Salim Newaz (2018) An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics. Heat and Mass Transfer, 54 (12). pp. 3587-3598. ISSN 0947-7411

V

Vazquez-Mendoza, Paulina and Elghandour, Mona M.M. and Alaba, Peter Adeniyi and Sánchez-Aparicio, Pedro and Alonso-Fresán, María Uxúa and Barbabosa-Pliego, Alberto and Salem, Abdelfattah Z.M. (2018) Antimicrobial and bactericidal impacts of Bacillus amyloliquefaciens CECT 5940 on fecal shedding of pathogenic bacteria in dairy calves and adult dogs. Microbial Pathogenesis, 114. pp. 458-463. ISSN 0882-4010

W

Wan Ab Naim, Wan Naimah and Ganesan, Poo Balan and Sun, Zhonghua and Lei, Jing and Jansen, Shirley and Hashim, Shahrul Amry and Ho, Teik Kok and Lim, Einly (2018) Flow pattern analysis in type B aortic dissection patients after stent-grafting repair: Comparison between complete and incomplete false lumen thrombosis. International Journal for Numerical Methods in Biomedical Engineering, 34 (5). e2961. ISSN 2040-7939

Wan Mohtar, Wan Hanna Melini and Afan, Haitham and El-Shafie, Ahmed and Bong, Charles Hin Joo and Ab. Ghani, Aminuddin (2018) Influence of bed deposit in the prediction of incipient sediment motion in sewers using artificial neural networks. Urban Water Journal, 15 (4). pp. 296-302. ISSN 1573-062X

Wang, Chin Tsan and Huang, Yan Sian and Sangeetha, Thangavel and Chen, Yen Ming and Chong, Wen Tong and Ong, Hwai Chyuan and Zhao, Feng and Yan, Wei Mon (2018) Novel bufferless photosynthetic microbial fuel cell (PMFCs) for enhanced electrochemical performance. Bioresource Technology, 255. pp. 83-87. ISSN 0960-8524

Wang, Chin Tsan and Sangeetha, Thangavel and Ding, De Quan and Chong, Wen Tong and Yan, Wei Mon (2018) Implementation of surface modified carbon cloth electrodes with biochar particles in microbial fuel cells. International Journal of Green Energy, 15 (13). pp. 789-794. ISSN 1543-5075

Wang, Long and Hossain, Mohammad Zakir and Selvaraj, Jeyraj and Rahim, Nasrudin Abd (2018) High voltage-gain full-bridge cascaded dc-dc converter for photovoltaic application. PLoS ONE, 13 (11). e0206691. ISSN 1932-6203

Wang, Wei Cheng and Chong, Wen Tong and Chao, Tien Hsin (2018) Performance analysis of a cross-axis wind turbine from wind tunnel experiments. Journal of Wind Engineering and Industrial Aerodynamics, 174. pp. 312-329. ISSN 0167-6105

Wang, Xiao Hang and Chong, Wen Tong and Wong, Kok Hoe and Saw, Lip Huat and Poh, Sin Chew and Lai, Sai Hin and Wang, Chin Tsan (2018) Preliminary Performance Tests and Simulation of a V-Shape Roof Guide Vane Mounted on an Eco-Roof System. Energies, 11 (10). p. 2846. ISSN 1996-1073

Wang, Xiao Hang and Chong, Wen Tong and Wong, Kok Hoe and Wang, Chin-Tsan and Saw, Lip Huat and Poh, Sin Chew and Lai, Sai Hin (2018) Preliminary Assessment of Optimized Accessorial Roof Shape for Performance of Wind Turbine Mounted on Eco-Roof System. International Journal of Precision Engineering and Manufacturing-Green Technology, 5 (3). pp. 375-385. ISSN 2288-6206

Wazeer, Irfan and Hizaddin, Hanee Farzana and El Blidi, Lahssen and Ali, Emad and Hashim, Mohd Ali and Hadj-Kali, Mohamed K. (2018) Liquid–Liquid Equilibria for Binary Azeotrope Mixtures of Benzene and Alcohols Using Choline Chloride-Based Deep Eutectic Solvents. Journal of Chemical and Engineering Data, 63 (3). pp. 613-624. ISSN 0021-9568

Wong, Goon Weng and Soin, Norhayati (2018) On-Chip Meander Line N-Well Resistor with Shielded Ground Conductor for Q-Factor Improvement. IETE Journal of Research, 64 (2). pp. 270-279. ISSN 0377-2063

Wong, K.H. and Chong, Wen Tong and Kong, Keen Kuan (2018) The design, simulation and testing of an omni-direction deflector for vertical axis wind turbine. In: International Conference on Sustainable Energy and Green Technology (SEGT 2018), 11-14 December 2018, Kuala Lumpur, Malaysia.

Wong, Kok Hoe and Chong, Wen Tong and Poh, Sin Chew and Shiah, Yui Chuin and Sukiman, Nazatul Liana and Wang, Chin Tsan (2018) 3D CFD simulation and parametric study of a flat plate deflector for vertical axis wind turbine. Renewable Energy, 129 (Part A). pp. 32-55. ISSN 0960-1481

Wong, Kok Hoe and Chong, Wen Tong and Sukiman, Nazatul Liana and Shiah, Yui Chuin and Poh, Sin Chew and Sopian, Kamaruzzaman and Wang, Wei Cheng (2018) Experimental and simulation investigation into the effects of a flat plate deflector on vertical axis wind turbine. Energy Conversion and Management, 160. pp. 109-125. ISSN 0196-8904

Wong, Siaw Lang and Paramesran, Raveendran and Taguchi, Akira (2018) Underwater Image Enhancement by Adaptive Gray World and Differential Gray-Levels Histogram Equalization. Advances in Electrical and Computer Engineering, 18 (2). pp. 109-116. ISSN 1582-7445

Wong, Wei Ru and Fan, Hui and Adikan, Faisal Rafiq Mahamd and Berini, Pierre (2018) Multichannel Long-Range Surface Plasmon Waveguides for Parallel Biosensing. Journal of Lightwave Technology, 36 (23). pp. 5536-5546. ISSN 0733-8724

Wong, Yee Meng and Wu, Ta Yeong and Ling, Tau Chuan and Show, Pau Loke and Lee, Sze Ying and Chang, Jo-Shu and Ibrahim, Shaliza and Juan, Joon Ching (2018) Evaluating new bio-hydrogen producers: Clostridium perfringens strain JJC, Clostridium bifermentans strain WYM and Clostridium sp. strain Ade.TY. Journal of Bioscience and Bioengineering, 125 (5). pp. 590-598. ISSN 1389-1723

Wong, Yong Jie and Arumugasamy, Senthil Kumar and Jewaratnam, Jegalakshimi (2018) Performance comparison of feedforward neural network training algorithms in modeling for synthesis of polycaprolactone via biopolymerization. Clean Technologies and Environmental Policy, 20 (9). pp. 1971-1986. ISSN 1618-954X

X

Xiang, Bo and Cao, Xiaoling and Yuan, Yanping and Hasanuzzaman, Md. and Zeng, Chao and Ji, Yasheng and Sun, Liangliang (2018) A novel hybrid energy system combined with solar-road and soil-regenerator: Sensitivity analysis and optimization. Renewable Energy, 129. pp. 419-430. ISSN 0960-1481

Y

Yadegaridehkordi, Elaheh and Hourmand, Mehdi and Nilashi, Mehrbakhsh and Shuib, Liyana and Ahani, Ali and Ibrahim, Othman (2018) Influence of big data adoption on manufacturing companies' performance: An integrated DEMATEL-ANFIS approach. Technological Forecasting & Social Change, 137. pp. 199-210. ISSN 0040-1625

Yaghoubi, Alireza and Masenelli-Varlot, Karine and Boisron, Olivier and Ramesh, Singh and Melinon, Patrice (2018) Is Graphitic Silicon Carbide (Silagraphene) Stable? Chemistry of Materials, 30 (20). pp. 7234-7244. ISSN 0897-4756

Yaghoubi, Alireza and Ramesh, Singh and Melinon, Patrice (2018) Predicting the Primitive Form of Rhombohedral Silicon Carbide (9R-SiC): A Pathway toward Polytypic Heterojunctions. Crystal Growth and Design, 18 (11). pp. 7059-7064. ISSN 1528-7483

Yakub, Fitri and Muhammad, Pauziah and Toh, Hoong Thiam and Abu Talip, Mohamad Sofian and Mori, Yasuchika (2018) Explicit controller of a single truck stability and rollover mitigation. Journal of Mechanical Science and Technology, 32 (9). pp. 4373-4381. ISSN 1738-494X

Yamashita, Naomi and Ota, Yuya and Salleh, Faiz and Navaneethan, Mani and Shimomura, Masaru and Murakami, Kenji and Ikeda, Hiroya (2018) Simulation of Temperature Distribution under Periodic Heating for Analysis of Thermal Diffusivity in Nanometer-Scale Thermoelectric Materials. IEICE Transactions on Electronics, E101.C (5). pp. 347-350. ISSN 0916-8524

Yang, Yung Chin and Wang, Po Hao and Tsai, Yu Ting and Ong, Hwai Chyuan (2018) Influences of feedstock and plasma spraying parameters on the fabrication of tubular solid oxide fuel cell anodes. Ceramics International, 44 (7). pp. 7824-7830. ISSN 0272-8842

Yap, Hwa Jen and Ooi, C.H. and Chang, Siow Wee (2018) Implementation of vision-assisted path planning system for bulk die sorting in semiconductor industry. In: 48th International Conference on Computers & Industrial Engineering (CIE 48), 2-5 December 2018, University of Auckland, Auckland, New Zealand.

Yap, Hwa Jen and Ooi, C.H. and Chang, Siow Wee (2018) Implementation of vision-assisted path planning system for bulk die sorting in semiconductor industry. In: The 48th International Conference on Computers and Industrial Engineering (CIE 48), 2-5 December 2018, Auckland, New Zealand. (Submitted)

Yap, Soon Poh and Chen, Paul Zhao Chiat and Goh, Yingxin and Ibrahim, Hussein Adebayo and Mo, Kim Hung and Yuen, Choon Wah (2018) Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates. Journal of Cleaner Production, 181. pp. 155-165. ISSN 0959-6526

Yaseen, Zaher and Ehteram, Mohammad and Sharafati, Ahmad and Shahid, Shamsuddin and Al-Ansari, Nadhir and El-Shafie, Ahmed (2018) The Integration of Nature-Inspired Algorithms with Least Square Support Vector Regression Models: Application to Modeling River Dissolved Oxygen Concentration. Water, 10 (9). p. 1124. ISSN 2073-4441

Yaseen, Zaher Mundher and Allawi, Mohammed Falah and Yousif, Ali A. and Jaafar, Othman and Hamzah, Firdaus Mohamad and El-Shafie, Ahmed (2018) Non-tuned machine learning approach for hydrological time series forecasting. Neural Computing and Applications, 30 (5). pp. 1479-1491. ISSN 0941-0643

Yaseen, Zaher Mundher and Fu, Minglei and Wang, Chen and Mohtar, Wan Hanna Melini Wan and Deo, Ravinesh C. and El-Shafie, Ahmed (2018) Application of the Hybrid Artificial Neural Network Coupled with Rolling Mechanism and Grey Model Algorithms for Streamflow Forecasting Over Multiple Time Horizons. Water Resources Management, 32 (5). pp. 1883-1899. ISSN 0920-4741

Yaseen, Zaher Mundher and Karami, Hojat and Ehteram, Mohammad and Mohd, Nuruol Syuhadaa and Mousavi, Sayed Farhad and Lai, Sai Hin and Kisi, Ozgur and Farzin, Saeed and Kim, Sungwon and El-Shafie, Ahmed (2018) Optimization of Reservoir Operation using New Hybrid Algorithm. KSCE Journal of Civil Engineering, 22 (11). pp. 4668-4680. ISSN 1226-7988

Yasin, Moh and Irawati, Ninik and Isa, Naimah Mat and Harun, Sulaiman Wadi and Ahmad, Fauzan (2018) Graphene coated silica microfiber for highly sensitive magnesium sensor. Sensors and Actuators A: Physical, 273. pp. 67-71. ISSN 0924-4247

Yasin, Moh and Irawati, Ninik and Isa, Naimah Mat and Harun, Sulaiman Wadi and Ahmad, Fauzan (2018) MWCNTs coated silica microfiber sensor for detecting Mg2+ in de-ionized water. Optik, 171. pp. 65-70. ISSN 0030-4026

Yau, Yat Huang and Chang, C.P. (2018) Performance analysis on an air-conditioning system installed with and without a fuzzy logic thermostat in an office building. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 232 (8). pp. 1079-1092. ISSN 0957-6509

Yau, Yat Huang and Hua, Shijie Norman and Kok, Chee Kuang (2018) Structural failure analysis of polycarbonate enclosures of electronic devices subjected to multiple ball impacts. Polymer Testing, 65. pp. 374-386. ISSN 0142-9418

Yau, Yat Huang and Poh, Kai Sin and Badarudin, Ahmad (2018) An investigation of thermal environment of an existing UFAD system in a high-rise office building in the tropics. Journal of Environmental Health Science and Engineering, 16 (2). pp. 313-322. ISSN 1735-2746

Yau, Yat Huang and Poh, Kai Sin and Badarudin, Ahmad (2018) A numerical airflow pattern study of a floor swirl diffuser for UFAD system. Energy and Buildings, 158. pp. 525-535. ISSN 0378-7788

Yau, Yat Huang and Tam, Jun Hao (2018) A comparison study for active chilled beam and variable air volume systems for an office building. Energy Procedia, 152. pp. 378-383. ISSN 1876-6102

Yaw, Chong Tak and Wong, Shen Yuong and Yap, Keem Siah and Yap, Hwa Jen and Amirulddin, Ungku Anisa Ungku and Tan, Shing Chiang (2018) An ELM based multi-agent system and its applications to power generation. Intelligent Decision Technologies, 12 (2). pp. 163-171. ISSN 1872-4981

Yazdi, Hassanali Mosalman and Ramli Sulong, Nor Hafizah (2018) On the behaviour of mid-connection in off-centre bracing system. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 171 (8). pp. 598-610. ISSN 0965-0911

Yew, Chee Hong and Azari, Pedram and Choi, Jane and Muhamad, Farina and Pingguan-Murphy, Belinda (2018) Electrospun Polycaprolactone Nanofibers as a Reaction Membrane for Lateral Flow Assay. Polymers, 10 (12). p. 1387. ISSN 2073-4360

Yew, Chee Hong and Azari, Pedram and Choi, Jane Ru and Li, Fei and Pingguan-Murphy, Belinda (2018) Electrospin-coating of nitrocellulose membrane enhances sensitivity in nucleic acid-based lateral flow assay. Analytica Chimica Acta, 1009. pp. 81-88. ISSN 0003-2670

Yildirim, Ozal and Tan, Ru San and Acharya, U. Rajendra (2018) An efficient compression of ECG signals using deep convolutional autoencoders. Cognitive Systems Research, 52. pp. 198-211. ISSN 1389-0417

Yip, Sook Chin and Tan, Wooi Nee and Tan, Chia Kwang and Gan, Ming Tao and Wong, Kok Sheik (2018) An anomaly detection framework for identifying energy theft and defective meters in smart grids. International Journal of Electrical Power and Energy Systems, 101. pp. 189-203. ISSN 0142-0615

Yong, B.F. and Ting, H.N. and Ng, K.H. (2018) Baby cry recognition using deep neural networks. In: World Congress on Medical Physics and Biomedical Engineering 2018, 3-8 June 2018, Prague, Czech Republic.

Yong, Jia Ying and Ramachandaramurthy, Vigna K. and Tan, Kang Miao and Selvaraj, Jeyraj (2018) Experimental Validation of a Three-Phase Off-Board Electric Vehicle Charger With New Power Grid Voltage Control. IEEE Transactions on Smart Grid, 9 (4). pp. 2703-2713. ISSN 1949-3053

Yong, K.W. and Ganesan, Poo Balan and Kazi, Md Salim Newaz and Ramesh, Sathyadeepak and Badruddin, Irfan Anjum and Mubarak, Nabisab Mujawar (2018) Sliding behavior of droplet on a hydrophobic surface with hydrophilic cavities: A simulation study. Physics of Fluids, 30 (12). p. 122006. ISSN 1070-6631

Yu, Kai Ling and Show, Pau Loke and Ong, Hwai Chyuan and Ling, Tau Chuan and Chen, Wei-Hsin and Salleh, Mohamad Amran Mohd (2018) Biochar production from microalgae cultivation through pyrolysis as a sustainable carbon sequestration and biorefinery approach. Clean Technologies and Environmental Policy, 20 (9). pp. 2047-2055. ISSN 1618-954X

Yunus Khan, T.M. and Badruddin, Irfan Anjum and Ankalgi, R.F. and Badarudin, Ahmad and Hungund, B.S. and Ankalgi, Fazal R. (2018) Biodiesel Production by Direct Transesterification Process via Sequential Use of Acid–Base Catalysis. Arabian Journal for Science and Engineering, 43 (11). pp. 5929-5936. ISSN 1319-8025

Yusof, Haziezol Helmi Mohd and Harun, Sulaiman Wadi and Dimyati, Kaharudin and Bora, Tanujjal and Mohammed, Waleed S. and Dutta, Joydeep (2018) Optical dynamic range maximization for humidity sensing by controlling growth of zinc oxide nanorods. Photonics and Nanostructures - Fundamentals and Applications, 30. pp. 57-64. ISSN 1569-4410

Yusof, Haziezol Helmi Mohd and Rahim, Hazli Rafis Abdul and Thokchom, Siddharth and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Uric acid sensing using tapered silica optical fiber coated with zinc oxide nanorods. Microwave and Optical Technology Letters, 60 (3). pp. 645-650. ISSN 0895-2477

Yusof, Nur Hotimah and Razak, Hashim Abdul and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Multimode interference in single mode-multimode-single mode fiber structure for steel beam compressive strain measurement. Microwave and Optical Technology Letters, 60 (8). pp. 1971-1975. ISSN 0895-2477

Yusof, Yusliza and Ng, Zi Yi and Wong, Yew Hoong and Johan, Mohd Rafie (2018) The tunable permittivity of multi-walled carbon nanotubes/silver nanoparticles reinforced polyvinyl alcohol (PVA) nanocomposites at low frequency. Materials Research Express, 5 (8). 085604. ISSN 2053-1591

Yusof, Zulkifli Md. and Ibrahim, Zuwairie and Adam, Asrul and Azmi, Kamil Zakwan Mohd and Ab. Rahman, Tasiransurini and Muhammad, Badaruddin and Ab. Aziz, Nor Azlina and Abd Aziz, Nor Hidayati and Mokhtar, Norrima and Shapiai, Mohd Ibrahim and Muhammad, Mohd Saberi (2018) Distance evaluated simulated kalman filter with state encoding for combinatorial optimization problems. International Journal of Engineering & Technology, 7 (4). pp. 22-29. ISSN 2227-524X

Yusoff, Izzati Izni and Rohani, Rosiah and Khairul Zaman, Nadiah and Junaidi, Mohd Usman Mohd and Mohammad, Abdul Wahab and Zainal, Zamardina (2018) Durable pressure filtration membranes based on polyaniline-polyimide P84 blends. Polymer Engineering and Science, 59 (S1). E82-E92. ISSN 0032-3888

Yusoff, Mohd Nur Ashraf Mohd and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Khuong, L.S. and Zaharin, Muhammad Syarifuddin Mohamed and Alabdulkarem, Abdullah (2018) Comparative assessment of ethanol and isobutanol addition in gasoline on engine performance and exhaust emissions. Journal of Cleaner Production, 190. pp. 483-495. ISSN 0959-6526

Z

Zabri, Mohd Zakuan and Rozali, Shaifulazuar and Yahaya, Nor Afifah and Shazali, Siti Shafiah (2018) Effects of functionalized carbon nanofillers on the spectral selectivity behavior of aluminum nanocomposites for solar absorber applications. Materials Chemistry and Physics, 212. pp. 196-207. ISSN 0254-0584

Zaharin, Muhammad Syarifuddin Mohamed and Abdullah, Nik Rosli and Masjuki, Haji Hassan and Ali, Obed Majeed and Najafi, Gholamhassan and Yusaf, Talal (2018) Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine. Applied Thermal Engineering, 144. pp. 960-971. ISSN 1359-4311

Zahid, Rehan and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Mufti, Riaz Ahmad and Zulkifli, Nurin Wahidah Mohd and Gulzar, Mubashir and Bhutta, Muhammad Usman and Ali, Mian Ashfaq and Abdullah, Usman and Yunus, Robiah H. (2018) Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system. Industrial Lubrication and Tribology, 70 (5). pp. 888-901. ISSN 0036-8792

Zahid, Rehan and Mufti, Riaz Ahmad and Gulzar, Mubashir and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Yunus, Robiah (2018) Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C). Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 999-1013. ISSN 1350-6501

Zaihidee, F.M. and Mekhilef, S. and Mubin, M. (2018) Fractional order SMC for speed control of PMSM. In: 6th International Electrical Engineering Congress (iEECON2018), 7-9 March 2018, Krabi, Thailand.

Zainal, Bidattul Syirat and Zinatizadeh, Ali Akhbar and Ong, Hwai Chyuan and Mohd, Nuruol Syuhadaa and Ibrahim, Shaliza (2018) Effects of process, operational and environmental variables on biohydrogen production using palm oil mill effluent (POME). International Journal of Hydrogen Energy, 43 (23). pp. 10637-10644. ISSN 0360-3199

Zainol Abidin, Najihah and Abu Bakar, Muhammad Hafiz and Tamchek, Nizam and Adikan, Faisal Rafiq Mahamd and Mahdi, Mohd Adzir (2018) Pump distribution effect in dual-wavelength Raman-erbium random distributed feedback fiber laser. Optics Express, 26 (12). pp. 15411-15419. ISSN 1094-4087

Zakaria, U.N. and Harun, Sulaiman Wadi and Reddy, Pinninty Harshavardhan and Dutta, Debjit and Das, Shyamal and Dhar, Anirban and Paul, Mukul Chandra and Jusoh, Zulzilawati and Yasin, Moh (2018) Q-switched hafnium bismuth erbium-doped fiber laser with bismuth (III) telluride based saturable absorber. Chalcogenide Letters, 15 (4). pp. 181-186. ISSN 1584-8663

Zalnidzam, Wan Iqmal Faezy Wan and Mohamad, Hasmaini and Salim, Nur Ashida and Mokhlis, Hazlie and Yasin, Zuhaila Mat (2018) Optimal Charging Schedule Coordination of Electric Vehicles in Smart Grid. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 82-89. ISSN 2502-4752

Zamzamzadeh, Mahdieh and Saifizul, Ahmad Abdullah and Ramli, Rahizar and Soong, Ming Foong (2018) Heavy vehicle multi-body dynamic simulations to estimate skidding distance. Baltic Journal of Road and Bridge Engineering, 13 (1). pp. 23-33. ISSN 1822-427X

Zandi, Yousef and Shariati, Mahdi and Marto, Aminaton and Wei, Xing and Karaca, Zeki and Dao, Duykien and Toghroli, Ali and Hashemi, Mir Heydar and Sedghi, Yadollah and Wakil, Karzan and Khorami, Majid (2018) Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake. Steel and Composite Structures, 28 (4). pp. 439-447. ISSN 1229-9367

Zare-Zardini, H. and Taheri-Kafrani, A. and Amiri, A. and Bordbar, A.K. (2018) New generation of drug delivery systems based on ginsenoside Rh2-, Lysine- and Arginine-treated highly porous graphene for improving anticancer activity. Scientific Reports, 8 (1). pp. 1-15. ISSN 2045-2322

Zavareh, Mitra Akhtari and Doustmohammadi, Ehsan and Sarhan, Ahmed A.D.M and Karimzadeh, Ramin and Moozarm Nia, Pooria and Ramesh, Singh (2018) Comparative study on the corrosion and wear behavior of plasma-sprayed vs. high velocity oxygen fuel-sprayed Al8Si20BN ceramic coatings. Ceramics International, 44 (11). pp. 12180-12193. ISSN 0272-8842

Zavareh, Mitra Akhtari and Sarhan, Ahmed Aly Diaa Mohammed and Karimzadeh, Ramin and Ramesh, Singh (2018) Analysis of corrosion protection behavior of Al2O3-TiO2 oxide ceramic coating on carbon steel pipes for petroleum industry. Ceramics International, 44 (6). pp. 5967-5975. ISSN 0272-8842

Ziaei-Nia, Ali and Shariati, Mahdi and Salehabadi, Elnaz (2018) Dynamic mix design optimization of high-performance concrete. Steel and Composite Structures, 29 (1). pp. 67-75. ISSN 1229-9367

Zuikafly, Siti Nur Fatin and Khalifa, Ali and Ahmad, Fauzan and Shafie, Suhaidi and Harun, Sulaiman Wadi (2018) Conductive graphene as passive saturable absorber with high instantaneous peak power and pulse energy in Q-switched regime. Results in Physics, 9. pp. 371-375. ISSN 2211-3797

This list was generated on Sat Oct 19 17:36:02 2019 +08.