Items where Division is "Faculty of Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items: 268.

-

-, Azeem and Badruddin, Irfan Anjum and Idris, Mohd Yamani Idna and Nik-Ghazali, Nik Nazri and Salman Ahmed, N.J. and Al-Rashed, A.A.A.A. (2016) Conjugate heat and mass transfer in square porous cavity. Indian Journal of Pure and Applied Physics, 54 (12). pp. 777-786. ISSN 0019-5596

A

Ab Razak, M.Z. and Saleh, Z.S. and Ahmad, F. and Anyi, C.L. and Harun, Sulaiman Wadi and Arof, Hamzah (2016) High-power Q-switched erbium-ytterbium codoped fiber laser using multiwalled carbon nanotubes saturable absorber. Optical Engineering (OE), 55 (10). p. 106112. ISSN 0091-3286

Abd Razak, B. and Azmi, N.A. and Mahmoodian, R. and Hamdi, M. and Gupta, V. and Wasa, K. (2016) An Energy Star Physical Vapor Deposition (PVD) Machine. In: International Conference on Knowledge Transfer, 1-3 December 2015, Putrajaya, Malaysia.

Abdi, S.M. and Ghedamsi, K. and Mekhilef, Saad (2016) Single phase grid connected multilevel inverter for isolated and unbalanced PV sources. EEA - Electrotehnica, Electronica, Automatica, 64 (3). pp. 20-27. ISSN 1582-5175

Abdullahi, A.A. and Choudhury, I.A. and Azuddin, M. (2016) Effect of runner dimensions on cavity filling in microinjection moulding for defect-free parts. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7788-7793. ISSN 1819-6608

Abedin, M.J. and Kalam, M.A. and Masjuki, Haji Hassan and Sabri, M.F.M. and Rahman, S.M.A. and Sanjid, A. and Fattah, I.M.R. (2016) Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5. Renewable Energy, 88. pp. 20-29. ISSN 0960-1481

Abo-Hamad, A. and AlSaadi, M.A. and Hayyan, M. and Juneidi, I. and Hashim, M.A. (2016) Ionic Liquid-Carbon Nanomaterial Hybrids for Electrochemical Sensor Applications: a Review. Electrochimica Acta, 193. pp. 321-343. ISSN 0013-4686

Abu Rmilah, M.H.Y. and Hassan, M.A. and Mardi, N.A. (2016) A PC-based simulation platform for a quadcopter system with self-tuning fuzzy PID controllers. Computer Applications in Engineering Education, 24 (6). pp. 934-950. ISSN 1061-3773

Abubakar, A. and Mantoro, T. and Moedjiono, S. and Ayu, M.A. and Chiroma, H. and Waqas, A. and Abdulhamid, S.M. and Hamza, M.F. and Gital, A.Y. (2016) A Support Vector Machine Classification of Computational Capabilities of 3D Map on Mobile Device for Navigation Aid. International Journal of Interactive Mobile Technologies (iJIM), 10 (3). pp. 4-10. ISSN 1865-7923

Abutaha, F. and Razak, H.A. and Kanadasan, Jegathish (2016) Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete. Construction and Building Materials, 112. pp. 416-423. ISSN 0950-0618

Acharya, U.R. and Chowriappa, P. and Fujita, H. and Bhat, S. and Dua, S. and Koh, J.E.W. and Eugene, L.W.J. and Kongmebhol, P. and Ng, K.H. (2016) Thyroid lesion classification in 242 patient population using Gabor transform features from high resolution ultrasound images. Knowledge-Based Systems, 107. pp. 235-245. ISSN 0950-7051

Acharya, U.R. and Fujita, H. and Bhat, S. and Koh, J.E.W. and Adam, M. and Ghista, D.N. and Sudarshan, V.K. and Chua, K.P. and Chua, K.C. and Molinari, F. and Ng, E.Y.K. and Tan, R.S. (2016) Automated diagnosis of diabetes using entropies and diabetic index. Journal of Mechanics in Medicine and Biology (jmmb), 16 (01). p. 1640008. ISSN 0219-5194

Acharya, U.R. and Fujita, H. and Sudarshan, V.K. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Hagiwara, Y. and Chua, C.K. and Junnarkar, S.P. and Vijayananthan, A. and Ng, K.H. (2016) An integrated index for identification of fatty liver disease using radon transform and discrete cosine transform features in ultrasound images. Information Fusion, 31. pp. 43-53. ISSN 1566-2535

Acharya, U.R. and Fujita, H. and Sudarshan, V.K. and Oh, S.L. and Adam, M. and Koh, J.E.W. and Tan, J.H. and Ghista, D.N. and Martis, R.J. and Chua, C.K. and Poo, C.K. and Tan, R.S. (2016) Automated detection and localization of myocardial infarction using electrocardiogram: a comparative study of different leads. Knowledge-Based Systems, 99. pp. 146-156. ISSN 0950-7051

Acharya, U.R. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Bhandary, S.V. and Rao, A.K. and Fujita, H. and Hagiwara, Y. and Chua, C.K. and Laude, A. (2016) Automated screening system for retinal health using bi-dimensional empirical mode decomposition and integrated index. Computers in Biology and Medicine, 75. pp. 54-62. ISSN 0010-4825

Acharya, U.R. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Noronha, K. and Bhandary, S.V. and Rao, A.K. and Hagiwara, Y. and Chua, C.K. and Laude, A. (2016) Novel risk index for the identification of age-related macular degeneration using radon transform and DWT features. Computers in Biology and Medicine, 73. pp. 131-140. ISSN 0010-4825

Acharya, U.R. and Raghavendra, U. and Fujita, H. and Hagiwara, Y. and Koh, J.E.W. and Jen Hong, T. and Sudarshan, V.K. and Vijayananthan, A. and Yeong, C.H. and Gudigar, A. and Ng, K.H. (2016) Automated characterization of fatty liver disease and cirrhosis using curvelet transform and entropy features extracted from ultrasound images. Computers in Biology and Medicine, 79. pp. 250-258. ISSN 0010-4825

Acharya, U.R. and Sudarshan, V.K. and Adeli, H. and Santhosh, J. and Koh, J.E.W. and Puthankatti, S.D. and Adeli, A. (2016) A novel depression diagnosis index using nonlinear features in EEG signals. European Neurology, 74 (1-2). pp. 79-83. ISSN 0014-3022

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M.I. and Cumming, P. and Mubin, M. (2016) Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal. SpringerPlus, 5 (1). p. 1036. ISSN 2193-1801

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M.I. and Mubin, M. (2016) Evaluation of different peak models of eye blink EEG for signal peak detection using artificial neural network. Neural Network World, 26 (1). pp. 67-89. ISSN 1210-0552

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M.I. and Mubin, M. and Saad, I. (2016) Feature selection using angle modulated simulated Kalman filter for peak classification of EEG signals. SpringerPlus, 5 (1). p. 1580. ISSN 2193-1801

Adnan, N.N. and Bidin, N. and Taib, N.A.M. and Haris, H. and Fakaruddin, M. and Hashim, A.M. and Krishnan, G. and Harun, Sulaiman Wadi (2016) Passively Q-switched flashlamp pumped Nd:YAG laser using liquid graphene oxide as saturable absorber. Optics & Laser Technology, 80. pp. 28-32. ISSN 0030-3992

Adzila, S. and Ramesh, S. and Sopyan, I. (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 1819-6608

Afrand, M. and Ahmadi Nadooshan, A. and Hassani, M. and Yarmand, H. and Dahari, M. (2016) Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data. International Communications in Heat and Mass Transfer, 77. pp. 49-53. ISSN 0735-1933

Afrand, M. and Nazari Najafabadi, K. and Sina, N. and Safaei, M.R. and Kherbeet, A.Sh. and Wongwises, S. and Dahari, M. (2016) Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network. International Communications in Heat and Mass Transfer, 76. pp. 209-214. ISSN 0735-1933

Afshar Ghotli, R. and Abdul Raman, A.A. and Ibrahim, S. (2016) The effect of various designs of six-curved blade impellers on reaction rate analysis in liquid–liquid mixing vessel. Measurement, 91. pp. 440-450. ISSN 0263-2241

Aghajani Mir, M. and Taherei Ghazvinei, P. and Sulaiman, N.M.N. and Basri, N.E.A. and Saheri, S. and Mahmood, N.Z. and Jahan, A. and Begum, R.A. and Aghamohammadi, N. (2016) Application of TOPSIS and VIKOR improved versions in a multi criteria decision analysis to develop an optimized municipal solid waste management model. Journal of Environmental Management, 166. pp. 109-115. ISSN 0301-4797

Aghamohammadi, N. and Reginald, S.S. and Shamiri, A. and Zinatizadeh, A.A. and Wong, L.P. and Sulaiman, N.M.N. (2016) An Investigation of Sustainable Power Generation from Oil Palm Biomass: A Case Study in Sarawak. Sustainability, 8 (5). p. 416. ISSN 2071-1050

Ahmad, F. and Harun, Sulaiman Wadi and Nor, Roslan Md and Ahmad, Harith and Ibrahim, M.H. (2016) Soliton pulse generation using a swcntspolyvinyl alcohol thin film based passive saturable absorber. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6324-6327. ISSN 1819-6608

Ahmad, Harith and Hassan, S.N.M. and Ahmad, F. and Zulkifli, M.Z. and Harun, Sulaiman Wadi (2016) Broadband tuning in a passively Q-switched erbium doped fiber laser (EDFL) via multiwall carbon nanotubes/polyvinyl alcohol (MWCNT/PVA) saturable absorber. Optics Communications, 365. pp. 54-60. ISSN 0030-4018

Ahmad, Harith and Ismail, Mohd Afiq and Suthaskumar, M. and Tiu, Zian Cheak and Harun, Sulaiman Wadi and Zulkifli, M.Z. and Samikannu, S. and Sivaraj, S. (2016) S-band Q-switched fiber laser using molybdenum disulfide (MoS2) saturable absorber. Laser Physics Letters, 13 (3). 035103. ISSN 1612-2011

Ahmad, Harith and Lee, C.S.J. and Ismail, M.A. and Ali, Z.A. and Reduan, S.A. and Ruslan, N.E. and Ismail, Mohammad Faizal and Harun, Sulaiman Wadi (2016) Zinc oxide (ZnO) nanoparticles as saturable absorber in passively Q-switched fiber laser. Optics Communications, 381. pp. 72-76. ISSN 0030-4018

Ahmad, Harith and Lee, C.S.J. and Ismail, Mohd Afiq and Ali, Z.A. and Reduan, S.A. and Ruslan, N.E. and Harun, Sulaiman Wadi (2016) Tunable Q-switched fiber laser using zinc oxide nanoparticles as a saturable absorber. Applied Optics, 55 (16). p. 4277. ISSN 0003-6935

Ahmad, Harith and Reduan, S.A. and Ali, Z.A. and Ismail, M.A. and Ruslan, N.E. and Lee, C.S.J. and Puteh, R. and Harun, Sulaiman Wadi (2016) C-Band Q-Switched Fiber Laser Using Titanium Dioxide (TiO 2) As Saturable Absorber. IEEE Photonics Journal, 8 (1). pp. 1-7. ISSN 1943-0655

Ahmad, Harith and Ruslan, N.E. and Ali, Z.A. and Reduan, S.A. and Lee, C.S.J. and Shaharuddin, R.A. and Nayan, N. and Ismail, Mohd Afiq (2016) Ag-nanoparticle as a Q switched device for tunable C-band fiber laser. Optics Communications, 381. pp. 85-90. ISSN 0030-4018

Ahmad, Harith and Ruslan, N.E. and Ismail, M.A. and Reduan, S.A. and Lee, C.S.J. and Sathiyan, S. and Sivabalan, S. and Harun, Sulaiman Wadi (2016) Passively Q-switched erbium-doped fiber laser at C-band region based on WS_2 saturable absorber. Applied Optics, 55 (5). p. 1001. ISSN 0003-6935

Ahmad, Harith and Ruslan, N.E. and Ismail, Mohd Afiq and Ali, Z.A. and Reduan, S.A. and Lee, C.S.J. and Harun, Sulaiman Wadi (2016) Silver nanoparticle-film based saturable absorber for passivelyQ-switched erbium-doped fiber laser (EDFL) in ring cavity configuration. Laser Physics, 26 (9). 095103. ISSN 1054-660X

Ahmad, Harith and Salim, M.A.M. and Ali, Z.A. and Ismail, Mohammad Faizal and Thambiratnam, K. and Latiff, A.A. and Nayan, N. and Harun, Sulaiman Wadi (2016) Titanium dioxide-based Q-switched dual wavelength in the 1 micron region. Chinese Optics Letters, 14 (9). 091403-91407. ISSN 1671-7694

Ahmad, Harith and Salim, M.A.M. and Azzuhri, Saaidal Razalli and Harun, Sulaiman Wadi (2016) Highly stable and tunable narrow-spacing dual-wavelength ytterbium-doped fiber using a microfiber Mach–Zehnder interferometer. Optical Engineering (OE), 55 (2). 026114. ISSN 0091-3286

Ahmad, Harith and Salim, M.A.M. and Azzuhri, Saaidal Razalli and Jaddoa, M.F. and Harun, Sulaiman Wadi (2016) Tunable dual-wavelength ytterbium-doped fiber laser using a strain technique on microfiber Mach–Zehnder interferometer. Applied Optics, 55 (4). p. 778. ISSN 0003-6935

Ahmad, Harith and Salim, M.A.M. and Ismail, Mohammad Faizal and Harun, Sulaiman Wadi (2016) Q-switched ytterbium-doped fiber laser with zinc oxide based saturable absorber. Laser Physics, 26 (11). p. 115107. ISSN 1054-660X

Ahmad, Harith and Salim, M.A.M. and Soltanian, M.R.K. and Azzuhri, Saaidal Razalli and Harun, Sulaiman Wadi and Yasin, Moh (2016) Generation of stable and narrow spacing dual-wavelength ytterbium-doped fiber laser using a photonic crystal fiber. Journal of Modern Optics, 63 (10). pp. 968-973. ISSN 0950-0340

Ahmad, Harith and Salim, M.A.M. and Thambiratnam, K. and Norizan, S.F. and Harun, Sulaiman Wadi (2016) A black phosphorus-based tunable Q-switched ytterbium fiber laser. Laser Physics Letters, 13 (9). 095103. ISSN 1612-2011

Ahmad, Harith and Suthaskumar, M. and Tiu, Zian Cheak and Zarei, A. and Harun, Sulaiman Wadi (2016) Q-switched Erbium-doped fiber laser using MoSe 2 as saturable absorber. Optics & Laser Technology, 79. pp. 20-23. ISSN 0030-3992

Ahmad, N. and Ghazilla, R.A.R. and Md Azizi, M.Z.H. (2016) Steady state visual evoked potential based BCI as control method for exoskeleton: A review. Malaysian Journal of Public Health Medicine, 16 (Sppl.1). pp. 86-94. ISSN 1675-0306

Ahmad, P. and Khandaker, Mayeen Uddin and Amin, Yusoff Mohd and Khan, G. and Ramay, S.M. and Mahmood, A. and Amin, M. and Muhammad, N. (2016) Catalytic growth of vertically aligned neutron sensitive 10Boron nitride nanotubes. Journal of Nanoparticle Research, 18. p. 25. ISSN 1388-0764

Ahmad, S. and Albatsh, F.M. and Mekhilef, Saad and Mokhlis, Hazlie (2016) Optimal placement of unified power flow controller by dynamic implementation of system-variable-based voltage-stability indices to enhance voltage stability. Journal of Testing and Evaluation, 44 (1). pp. 290-309. ISSN 0090-3973

Ahmed, M.H.M. and Banabila, A.M. and Latiff, A.A. and Irawati, Ninik and Ali, N.M. and Harun, Sulaiman Wadi (2016) Tunable Q-switched erbium doped fiber laser with graphene oxide paper based saturable absorber. Optoelectronics and Advanced Materials-Rapid Communications, 10 (11-12). pp. 791-796. ISSN 1842-6573

Ahmed, M.H.M. and Latiff, A.A. and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Femtosecond mode-locked erbium-doped fiber laser based on MoS2–PVA saturable absorber. Optics & Laser Technology, 82. pp. 145-149. ISSN 0030-3992

Ahmed, M.H.M. and Latiff, A.A. and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Soliton mode-locked erbium-doped fibre laser with mechanically exfoliated molybdenum disulphide saturable absorber. IET Optoelectronics, 10 (5). pp. 169-173. ISSN 1751-8768

Ahmed, M.H.M. and Latiff, A.A. and Arof, Hamzah and Harun, Sulaiman Wadi (2016) Mode-locking pulse generation with MoS2 -PVA saturable absorber in both anomalous and ultra-long normal dispersion regimes. Applied Optics, 55 (15). pp. 4247-4252. ISSN 1559-128X

Ahmed, M.H.M. and Latiff, A.A. and Arof, Hamzah and Harun, Sulaiman Wadi (2016) Ultrafast erbium-doped fiber laser mode-locked with a black phosphorus saturable absorber. Laser Physics Letters, 13 (9). 095104. ISSN 1612-2011

Ahmed, R. and Rifat, A.A. and Sabouri, A. and Al-Qattan, B. and Essa, K. and Butt, H. (2016) Multimode waveguide based directional coupler. Optics Communications, 370. pp. 183-191. ISSN 0030-4018

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Dai, Q. and Yun, S.H. and Butt, H. (2016) Multiwall carbon nanotube microcavity arrays. Journal of Applied Physics, 119 (11). p. 113105. ISSN 0021-8979

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Salem, M.S. and Yun, S.H. and Butt, H. (2016) Optical microring resonator based corrosion sensing. RSC Advances, 6 (61). pp. 56127-56133. ISSN 2046-2069

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Yun, S.H. and Khan, S. and Butt, H. (2016) Mode-multiplexed waveguide sensor. Journal of Electromagnetic Waves and Applications, 30 (4). pp. 444-455. ISSN 0920-5071

Ahmed, S. and Ahmed, S. and Shumon, M.R.H. and Falatoonitoosi, E. and Quader, M.A. (2016) A comparative decision-making model for sustainable end-of-life vehicle management alternative selection using AHP and extent analysis method on fuzzy AHP. International Journal of Sustainable Development and World Ecology, 23 (1). pp. 83-97. ISSN 1350-4509

Ahmed, S. and Ahmed, S. and Shumon, M.R.H. and Quader, M.A. and Cho, H.M. and Mahmud, M.I. (2016) Prioritizing Strategies for Sustainable End-of-Life Vehicle Management Using Combinatorial Multi-Criteria Decision Making Method. International Journal of Fuzzy Systems, 18 (3). pp. 448-462. ISSN 1562-2479

Ahmmad, R. and Jumaat, M.Z. and Alengaram, U.J. and Bahri, S. and Rehman, M.A. and Hashim, H. (2016) Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112 (Part 1). pp. 566-574. ISSN 0959-6526

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2016) Design and performance analysis of small-sized multiband microstrip patch antenna on custom-made biopolymer substrate. Science and Engineering of Composite Materials, 23 (6). pp. 729-735. ISSN 0792-1233

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2016) Design of a rectangular shape omega slotted microstrip patch antenna for WLAN/WiMaxwireless applications. Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, 61 (1). pp. 63-67. ISSN 0035-4066

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. and Aldhaheri, R.W. and Sheikh, M.M. (2016) A new design approach for dual-band patch antenna serving Ku/K band satellite communications. International Journal of Satellite Communications and Networking, 34 (6). pp. 759-769. ISSN 1542-0973

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. and Mansor, M.F. and Misran, N. (2016) Dual band printed patch antenna on ceramic–polytetrafluoroethylene composite material substrate for GPS and WLAN applications. Telecommunication Systems, 62 (4). pp. 747-756. ISSN 1018-4864

Ajeel, M.A. and Aroua, M.K. and Daud, W.M.A.W. (2016) Reactivity of carbon black diamond electrode during the electro-oxidation of Remazol Brilliant Blue R. RSC Advances, 6 (5). pp. 3690-3699. ISSN 2046-2069

Akbari, M. and Reza, A.W. and Noordin, K.A. and Dimyati, K. and Manesh, M.R. and Hindia, M.N. (2016) Recent Efficient Iterative Algorithms on Cognitive Radio Cooperative Spectrum Sensing to Improve Reliability and Performance. International Journal of Distributed Sensor Networks, 12 (1). p. 3701308. ISSN 1550-1329

Akbari, O.A. and Safaei, M.R. and Goodarzi, M. and Akbar, N.S. and Zarringhalam, M. and Shabani, G.A.S. and Dahari, M. (2016) A modified two-phase mixture model of nanofluid flow and heat transfer in a 3-D curved microtube. Advanced Powder Technology, 27 (5). pp. 2175-2185. ISSN 0921-8831

Akbari, O.A. and Toghraie, A. and Karimipour, A. and Safaei, M.R. and Goodarzi, M. and Alipour, H. and Dahari, M. (2016) Investigation of rib's height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel. Applied Mathematics and Computation, 290. pp. 135-153. ISSN 0096-3003

Akhavan, P. and Ale Ebrahim, N. and Fetrati, M.A. and Pezeshkan, A. (2016) Major trends in knowledge management research: a bibliometric study. Scientometrics, 107 (3). pp. 1249-1264. ISSN 0138-9130

Akikur, R.K. and Saidur, R. and Ullah, K.R. and Hajimolana, S.A. and Ping, H.W. and Hussain, Mohd Azlan (2016) Economic feasibility analysis of a solar energy and solid oxide fuel cell-based cogeneration system in Malaysia. Clean Technologies and Environmental Policy, 18 (3). pp. 669-687. ISSN 1618-954X

Al-Askari, S. and Hamida, B.A. and Khan, S. and Harun, Sulaiman Wadi (2016) Optimizing tapered microfiber sensor design and simulation. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 449-452. ISSN 1819-6608

Al-Azawi, M.A. and Bidin, N. and Bououdina, C. and Alshanableh, A. and Salih, E.Y. (2016) The effects of liquid environment on ablation efficiency and morphology of gold nanoparticles prepared by laser ablation technique. Journal of Nano Research, 37. pp. 99-108. ISSN 1662-5250

Al-Fakih, E.A. and Abu Osman, Noor Azuan and Adikan, Faisal Rafiq Mahamd and Eshraghi, A. and Jahanshahi, P. (2016) Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets. IEEE Sensors Journal, 16 (4). pp. 965-974. ISSN 1530-437X

Al-Mansob, R.A. and Ismail, A. and Yusoff, N.I.M. and Albrka, S.I. and Azhari, C.H. and Karim, M.R. (2016) Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt. Construction and Building Materials, 102 (Part 1). pp. 190-199. ISSN 0950-0618

Al-Masoodi, A.H.H. and Ahmed, M.H.M. and Latiff, A.A. and Arof, Hamzah and Harun, Sulaiman Wadi (2016) Q-Switched Ytterbium-Doped Fiber Laser Using Black Phosphorus as Saturable Absorber. Chinese Physics Letters, 33 (5). 054206. ISSN 0256-307X

Al-Obaidi, S.M.A. and Salman Leong, M. and Raja Hamzah, R.I. and Abdelrhman, A.M. and Danaee, M. (2016) Acoustic emission parameters evaluation in machinery condition monitoring by using the concept of multivariate analysis. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7507-7514. ISSN 1819-6608

Al-Qazwini, Y. and Noor, A.S.M. and Al-Qazwini, Z. and Yaacob, M.H. and Harun, Sulaiman Wadi and Mahdi, M.A. (2016) Refractive index sensor based on SPR in symmetrically etched plastic optical fibers. Sensors and Actuators A: Physical, 246. pp. 163-169. ISSN 0924-4247

Al-Samman, A.M. and Rahman, T.A. and Azmi, M.H. and Hindia, M.N. and Khan, I. and Hanafi, E. (2016) Statistical modelling and characterization of experimental mm-wave indoor channels for future 5g wireless communication networks. PLoS ONE, 11 (9). e0163034. ISSN 1932-6203

AlOmar, M.K. and AlSaadi, M.A. and Akib, S. and Hayyan, M. and Hashim, M.A. (2016) Functionalization of CNTs surface with phosphonuim based deep eutectic solvents for arsenic removal from water. Applied Surface Science, 389. pp. 216-226. ISSN 0169-4332

AlOmar, M.K. and AlSaadi, M.A. and Hayyan, M. and Akib, S. and Ibrahim, R.K. and Hashim, M.A. (2016) Lead removal from water by choline chloride based deep eutectic solvents functionalized carbon nanotubes. Journal of Molecular Liquids, 222. pp. 883-894. ISSN 0167-7322

AlOmar, M.K. and Hayyan, M. and AlSaadi, M.A. and Akib, S. and Hayyan, A. and Hashim, M.A. (2016) Glycerol-based deep eutectic solvents: Physical properties. Journal of Molecular Liquids, 215. pp. 98-103. ISSN 0167-7322

AlSaadi, M.A. and Al Mamun, A. and Alam, M.Z. and Amosa, M.K. and Atieh, M.A. (2016) Removal of Cadmium from Water by CNT-PAC Composite: Effect of Functionalization. NANO (nano), 11 (1). p. 1650011. ISSN 1793-2920

Alam, M. and Hussain, R.R. and Islam, A.B.M.S. (2016) Impact assessment of rainfall-vegetation on sedimentation and predicting erosion-prone region by GIS and RS. Geomatics, Natural Hazards and Risk, 7 (2). pp. 667-679. ISSN 1947-5705

Alansi, M. and Elshafiey, I. and Al-Sanie, A. and Mabrouk, A. (2016) FPGA Implementation of Multi-User Detection Genetic Algorithm Tool for SDMA-OFDM Systems. Wireless Personal Communications, 86 (3). pp. 1241-1263. ISSN 0929-6212

Aldhaibani, A.O. and Rahman, T.A. and Aljunid, S.A. and Hindia, M.N. and Hanafi, E. (2016) A new model to enhance the QoS of spectral amplitude coding-optical code division multiple access system with OFDM technique. Optical and Quantum Electronics, 48 (10). p. 481. ISSN 0306-8919

Alengaram, U.J. and Mohottige, H.W.N. and Wu, C.Q. and Jumaat, M.Z. and Yap, S.P. and Wang, Z.Q. (2016) Ductile behaviour of oil palm shell concrete slabs subjected to blast loads. In: Proceedings of the 4th International Conference on Protective Structures, 18 - 21 October 2016, Beijing, China.

Alhalawani, A.M.F. and Towler, M.R. (2016) The effect of ZnO 虠 Ta2O5 substitution on the structural and thermal properties of SiO2-ZnO-SrO-CaO-P2O5 glasses. Materials Characterization, 114. pp. 218-224. ISSN 1044-5803

Ali, B. and Sabri, M.F.M. and Jauhari, I. and Sukiman, N.L. (2016) Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders. Microelectronics Reliability, 63. pp. 224-230. ISSN 0026-2714

Ali, M. and Soin, N. and Noorakma, A.C.W. and Yusof, N. and Hatta, S.F.W.M. (2016) Design and analysis of MEMS high sensitive capacitive pressure sensor. Journal of Engineering and Applied Sciences, 11 (12). pp. 2688-2692. ISSN 1816-949X

Ali, M.S. and Bakar, Ab Halim Abu and Tan, Chia Kwang and Mokhlis, Hazlie and Arof, Hamzah (2016) Studies on the application of wavelet families for a high impedance fault location algorithm in a distribution network. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (6). pp. 5043-5054. ISSN 1300-0632

Ali, O.M. and Mamat, R. and Masjuki, Haji Hassan and Abdullah, A.A. (2016) Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904

Allawi, Mohammed Falah and El-Shafie, Ahmed (2016) Utilizing RBF-NN and ANFIS Methods for Multi-Lead ahead Prediction Model of Evaporation from Reservoir. Water Resources Management, 30 (13). pp. 4773-4788. ISSN 0920-4741

Alsubari, B. and Shafigh, P. and Jumaat, M.Z. (2016) Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete. Journal of Cleaner Production, 137. pp. 982-996. ISSN 0959-6526

Aman, M.M. and Jasmon, G.B. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Naidu, K. (2016) Graph theory-based radial load flow analysis to solve the dynamic network reconfiguration problem. International Transactions on Electrical Energy Systems, 26 (4). pp. 783-808. ISSN 2050-7038

Aman, M.M. and Jasmon, G.B. and Mokhlis, Hazlie and Bakar, Ab Halim Abu (2016) Optimum tie switches allocation and DG placement based on maximisation of system loadability using discrete artificial bee colony algorithm. IET Generation, Transmission & Distribution, 10 (10). pp. 2277-2284. ISSN 1751-8687

Amini, H. and Farzaneh, B. and Azimifar, F. and Sarhan, A.A.D. (2016) Sensor-less force-reflecting macro–micro telemanipulation systems by piezoelectric actuators. ISA Transactions, 64. pp. 293-302. ISSN 0019-0578

Aminuddin, N.I. and Ahmad, R. and Ansari, H.M. and Mohd Zain, N. and Akbar, S.A. and Pingguan-Murphy, B. (2016) Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates. Materials & Design, 94. pp. 274-279. ISSN 0261-3069

Amir, A. and Amir, A. and Selvaraj, J. and Rahim, Nasrudin Abd (2016) Study of the MPP tracking algorithms: Focusing the numerical method techniques. Renewable and Sustainable Energy Reviews, 62. pp. 350-371. ISSN 1364-0321

Amir, Z. and Jan, B.M. and Wahab, A.K.A. and Khalil, M. and Ali, B.S. and Chong, W.T. (2016) Viscosity prediction model optimization for Saraline-based super lightweight completion fluid at high pressure and temperature. Petroleum Exploration and Development, 43 (5). pp. 863-868. ISSN 1876-3804

Amiri, A. and Ahmadi, G. and Shanbedi, M. and Etemadi, M. and Zubir, M.N.M. and Chew, B.T. and Kazi, S.N. (2016) Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids. RSC Advances, 6 (107). pp. 105508-105527. ISSN 2046-2069

Amiri, A. and Arzani, H.K. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Backward-facing step heat transfer of the turbulent regime for functionalized graphene nanoplatelets based water-ethylene glycol nanofluids. International Journal of Heat and Mass Transfer, 97. pp. 538-546. ISSN 0017-9310

Amiri, A. and Shanbedi, M. and Ahmadi, G. and Eshghi, H. and Kazi, S.N. and Chew, B.T. and Savari, M. and Zubir, M.N.M. (2016) Mass production of highly-porous graphene for high-performance supercapacitors. Scientific Reports, 6. p. 32686. ISSN 2045-2322

Amiri, A. and Shanbedi, M. and AliAkbarzade, M.J. (2016) The Specific Heat Capacity, Effective Thermal Conductivity, Density, and Viscosity of Coolants Containing Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes. Journal of Dispersion Science and Technology, 37 (7). pp. 949-955. ISSN 0193-2691

Amiri, A. and Shanbedi, M. and Chew, B.T. and Kazi, S.N. and Solangi, K.H. (2016) Toward improved engine performance with crumpled nitrogen-doped graphene based water-ethylene glycol coolant. Chemical Engineering Journal, 289. pp. 583-595. ISSN 1385-8947

Amirmojahedi, M. and Akib, S. and Basser, H. and Raymond Ooi, C.H. (2016) Methods for monitoring scour from large-diameter heat probe tests. Structural Health Monitoring, 15 (1). pp. 38-49. ISSN 1475-9217

Amrane, F. and Chaiba, A. and Babes, B.E. and Mekhilef, Saad (2016) Design and implementation of high performance field oriented control for grid-connected doubly fed induction generator via hysteresis rotor current controller. Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, 61 (4). pp. 319-324. ISSN 0035-4066

Ananthi, V.P. and Balasubramaniam, P. (2016) A new image denoising method using interval-valued intuitionistic fuzzy sets for the removal of impulse noise. Signal Processing, 121. pp. 81-93. ISSN 0165-1684

Anas, S.B.A. and Seyedzadeh, S. and Mokhtar, M. and Sahbudin, R.K.Z. (2016) Variable weight Khazani-Syed code using hybrid fixed-dynamic technique for optical code division multiple access system. Optical Engineering (OE), 55 (10). p. 106101. ISSN 0091-3286

Ang, Bee Chin and Ahmad, N. and Ong, Zhi Chao and Cheok, S.C. and Chan, H.F. (2016) Study of the mechanical and the thermal insulation properties of polyurethane coating containing chicken eggshell and rice husk ash as fillers. Pigment & Resin Technology, 45 (5). pp. 313-319. ISSN 0369-9420

Ang, T.N. and Chan, C.H. and Ngoh, G.C. and Lee, K.M. and Yoon, L.W. and Chua, A.S.M. (2016) Assessment of cellulosic biomass saccharification by molten brönsted acidic 1-ethyl-3-methylimidazolium hydrogen sulphate ([EMIM][HSO4]) via kinetic studies. BioResources, 11 (1). pp. 1349-1358. ISSN 1930-2126

Aramesh, R. and Akbari, V. and Shamiri, A. and Hussain, M.A. and Aghamohammadi, N. (2016) Hydrodynamics and particle mixing/segregation measurements in an industrial gas phase olefin polymerization reactor using image processing technique and CFD-PBM model. Measurement, 83. pp. 106-122. ISSN 0263-2241

Arslan, A. and Masjuki, Haji Hassan and Varman, M. and Kalam, M.A. and Quazi, M.M. and Mosarof, M.H. (2016) Effect of change in temperature on the tribological performance of micro surface textured DLC coating. Journal of Materials Research, 31 (13). pp. 1837-1847. ISSN 0884-2914

Arzani, H.K. and Amiri, A. and Kazi, S.N. and Badarudin, A. and Chew, B.T. (2016) Heat transfer performance of water-based tetrahydrofurfuryl polyethylene glycol-treated graphene nanoplatelet nanofluids. RSC Advances, 6 (70). pp. 65654-65669. ISSN 2046-2069

Arzani, H.K. and Amiri, A. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Experimental investigation of thermophysical properties and heat transfer rate of covalently functionalized MWCNT in an annular heat exchanger. International Communications in Heat and Mass Transfer, 75. pp. 67-77. ISSN 0735-1933

Asadi-Eydivand, M. and Solati-Hashjin, M. and Farzad, A. and Abu Osman, Noor Azuan (2016) Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robotics and Computer-Integrated Manufacturing, 37. pp. 57-67. ISSN 0736-5845

Asadi-Eydivand, M. and Solati-Hashjin, M. and Fathi, A. and Padashi, M. and Abu Osman, Noor Azuan (2016) Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms. Applied Soft Computing, 39. pp. 36-47. ISSN 1568-4946

Asadi-Eydivand, M. and Solati-Hashjin, M. and Shafiei, S.S. and Mohammadi, S. and Hafezi, M. and Abu Osman, Noor Azuan (2016) Structure, properties, and in vitro behavior of heat-treated calcium sulfate scaffolds fabricated by 3D printing. PLoS ONE, 11 (3). e0151216. ISSN 1932-6203

Asaithambi, P. and Abdul Raman, A.A. and Daud, W.M.A.W. (2016) Integrated ozone—electrocoagulation process for the removal of pollutant from industrial effluent: Optimization through response surface methodology. Chemical Engineering and Processing: Process Intensification, 105. pp. 92-102. ISSN 0255-2701

Asgharzadehahmadi, S. and Abdul Raman, Abdul Aziz and Parthasarathy, R. and Sajjadi, B. (2016) Sonochemical reactors: Review on features, advantages and limitations. Renewable and Sustainable Energy Reviews, 63. pp. 302-314. ISSN 1364-0321

Asgharzadehahmadi, S. and Davoody, M. and Ghotli, R.A. and Abdul Raman, A.A. and Parthasarathy, R. (2016) Effect of ultrasonic irradiations on gas-liquid mass transfer coefficient (kLa); Experiments and modelling. Measurement, 79. pp. 119-129. ISSN 0263-2241

Ashraful, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Rashedul, H.K. and Habibullah, M. and Rashed, M.M. and Mosarof, M.H. and Arslan, A. (2016) Impact of edible and non-edible biodiesel fuel properties and engine operation condition on the performance and emission characteristics of unmodified DI diesel engine. Biofuels, 7 (3). pp. 219-232. ISSN 1759-7269

Ashrafuzzaman, Md. and Al-Maruf, A. and Mahbubul, I.M. and Malek, A.B.M.A. and Mukaddes, A.M.M. (2016) Quality function deployment approach to measure supply chain performance: A case study on garments accessories industries. International Journal of Industrial and Systems Engineering (IJISE), 22 (1). pp. 96-120. ISSN 1748-5037

Aslam, M. and Shafigh, P. and Jumaat, M.Z. (2016) Drying shrinkage behaviour of structural lightweight aggregate concrete containing blended oil palm bio-products. Journal of Cleaner Production, 127. pp. 183-194. ISSN 0959-6526

Aslam, M. and Shafigh, P. and Jumaat, M.Z. and Lachemi, M. (2016) Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete. Journal of Cleaner Production, 119. pp. 108-117. ISSN 0959-6526

Aslani, N. and Noroozi, S. and Khoo, S.Y. and Ong, Z.C. and Maggs, C. (2016) Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering, 19 (3). pp. 163-170. ISSN 1369-7072

Aslian, A. and Asli, B.H.S. and Tan, Chin Joo and Adikan, Faisal Rafiq Mahamd and Toloei, A. (2016) Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings. International Journal of Photoenergy, 2016. pp. 1-11. ISSN 1110-662X

Ayodele, O.B. and Lethesh, K.C. and Gholami, Z. and Uemura, Y. (2016) Effect of ethanedioic acid functionalization on Ni/Al2O3 catalytic hydrodeoxygenation and isomerization of octadec-9-enoic acid into biofuel: Kinetics and Arrhenius parameters. Journal of Energy Chemistry, 25 (1). pp. 158-168. ISSN 2095-4956

Aziz, H.A. and Aroua, M.K. and Yusoff, R. and Abas, N.A. and Idris, Z. and Hassan, H.A. (2016) Production of Palm-Based Esteramine Through Heterogeneous Catalysis. Journal of Surfactants and Detergents, 19 (1). pp. 11-18. ISSN 1097-3958

Aziz, N.A.M. and Yunus, R. and Rashid, U. and Zulkifli, N.W.M. (2016) Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant. Tribology International, 93 (Part A). pp. 43-49. ISSN 0301-679X

Azman, S.S.N. and Zulkifli, N.W.M. and Masjuki, Haji Hassan and Gulzar, M. and Zahid, R. (2016) Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. Journal of Materials Research, 31 (13). pp. 1932-1938. ISSN 0884-2914

Azmi, N.H. and Ali, U.F.M. and Muhammad Ridwan, F. and Isa, K.M. and Zulkurnai, N.Z. and Aroua, M.K. (2016) Preparation of activated carbon using sea mango (Cerbera odollam) with microwave-assisted technique for the removal of methyl orange from textile wastewater. Desalination and Water Treatment, 57 (60). pp. 29143-29152. ISSN 1944-3994

B

Babadi, F.E. and Hosseini, S. and Masoudi Soltani, S. and Aroua, M.K. and Shamiri, A. and Samadi, M. (2016) Sulfonated Beet Pulp as Solid Catalyst in One-Step Esterification of Industrial Palm Fatty Acid Distillate. Journal of the American Oil Chemists' Society, 93 (3). pp. 319-327. ISSN 0003-021X

Babar, I.M. and Paul, M.C. and Das, S. and Dhar, A. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Mode-locked thulium ytterbium co-doped fiber laser with a graphene saturable absorber. Photonics Letters of Poland, 8 (4). pp. 104-106. ISSN 2080-2242

Baghlani, V. and Mehbudi, P. and Akbari, J. and Nezhad, E.Z. and Sarhan, A.A.D. and Hamouda, A.M.S. (2016) An optimization technique on ultrasonic and cutting parameters for drilling and deep drilling of nickel-based high-strength Inconel 738LC superalloy with deeper and higher hole quality. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 877-888. ISSN 0268-3768

Bahador, A. and Saud, S.N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M.K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288

Bakar, Ab Halim Abu and Zainal Abidin, A. and Illias, Hazlee Azil and Mokhlis, Hazlie and Halim, S.A. and Hassan, N.H.N. and Tan, Chia Kwang (2016) Determination of the striking distance of a lightning rod using finite element analysis. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (5). pp. 4083-4097. ISSN 1300-0632

Bakar, Ab Halim Abu and Zali, S.M. and Tan, Chia Kwang and Illias, Hazlee Azil and Mokhlis, Hazlie (2016) A comparative study for current transformer dimensioning in overcurrent relay. IEEJ Transactions on Electrical and Electronic Engineering, 11 (S1). S43-S48. ISSN 1931-4973

Barma, M.C. and Long, B.D. and Sabri, Mohd Faizul Mohd and Ramesh, Singh and Saidur, R. and Said, Suhana Mohd and Kimura, K. and Hai, N.H. and Huy, T.D. and Trung, T.B. (2016) Synthesis of Cu3.21Bi4.79S9 bismuth chalcogenide by mechanical alloying. Powder Technology, 294. pp. 348-352. ISSN 0032-5910

Barman, S.D. and Reza, A.W. and Kumar, N. and Anowar, T.I. (2016) Two-side Impedance Matching for Maximum Wireless Power Transmission. IETE Journal of Research, 62 (4). pp. 532-539. ISSN 0377-2063

Basar, M.R. and Ahmad, M.Y. and Cho, J. and Ibrahim, F. (2016) An improved resonant wireless power transfer system with optimum coil configuration for capsule endoscopy. Sensors and Actuators A: Physical, 249. pp. 207-216. ISSN 0924-4247

Bashar, I.I. and Alengaram, U.J. and Jumaat, M.Z. and Islam, A. and Santhi, H. and Sharmin, A. (2016) Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111. pp. 280-297. ISSN 0950-0618

Bashir, M.N. and Haseeb, A.S. Md. Abdul and Rahman, A.Z.M.S. and Fazal, M.A. (2016) Effect of Cobalt Doping on the Microstructure and Tensile Properties of Lead Free Solder Joint Subjected to Electromigration. Journal of Materials Science and Technology, 32 (11). pp. 1129-1136. ISSN 1005-0302

Bashirnezhad, K. and Bazri, S. and Safaei, M.R. and Goodarzi, M. and Dahari, M. and Mahian, O. and Dalkiliça, A.S. and Wongwises, S. (2016) Viscosity of nanofluids: A review of recent experimental studies. International Communications in Heat and Mass Transfer, 73. pp. 114-123. ISSN 0735-1933

Behroyan, I. and Vanaki, S. and Ganesan, Poo Balan and Saidur, R. (2016) A comprehensive comparison of various CFD models for convective heat transfer of Al2O3 nanofluid inside a heated tube. International Communications in Heat and Mass Transfer, 70. pp. 27-37. ISSN 0735-1933

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, A.A.D. and Akbari, J. and Hamdi, M. and Ong, Z.C. (2016) Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance. Concurrent Engineering, 24 (1). pp. 83-93. ISSN 1063-293X

Bhatti, J. and Fazal, M.A. and Bushroa, A.R. and Khan, A.F. and Quazi, M.M. (2016) Structural and mechanical properties of (Cr, Ni) N single and gradient layer coatings deposited on mild steel by magnetron sputtering. Tribology: Materials, Surfaces and Interfaces, 10 (3). pp. 117-125. ISSN 1751-5831

Bhatti, J. and Fazal, M.A. and Khan, A.F. and Bushroa, Abdul Razak and Quazi, M.M. (2016) Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate. Journal of Adhesion Science and Technology, 30 (20). pp. 2224-2235. ISSN 0169-4243

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. (2016) An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors. Materials and Manufacturing Processes, 31 (7). pp. 896-904. ISSN 1042-6914

Bhuiyan, M.S.H. and Choudhury, Imtiaz Ahmed and Dahari, Mahidzal and Nukman, Yusoff and Md Dawal, Siti Zawiah (2016) Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. Measurement, 92. pp. 208-217. ISSN 0263-2241

Braz, G.P. and Russold, M.F. and Fornusek, C. and Hamzaid, N.A. and Smith, R.M. and Davis, G.M. (2016) A novel motion sensor-driven control system for FES-assisted walking after spinal cord injury: A pilot study. Medical Engineering & Physics, 38 (11). pp. 1223-1231. ISSN 1350-4533

C

Chia, P.Y. and Haseeb, A.S. Md. Abdul and Mannan, S.H. (2016) Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects. Materials, 9 (6). p. 430. ISSN 1996-1944

Chong, S.S. and Abdul Raman, Abdul Aziz and Harun, Sulaiman Wadi and Arof, Hamzah (2016) Dye Concentrations Measurement Using Mach–Zehner Interferometer Sensor and Modeled by ANFIS. IEEE Sensors Journal, 16 (22). pp. 8044-8050. ISSN 1530-437X

Chong, S.S. and Abdul Raman, Abdul Aziz and Harun, Sulaiman Wadi and Arof, Hamzah (2016) Dye Concentrations Measurement Using Mach–Zehner Interferometer Sensor and Modeled by ANFIS. IEEE Sensors Journal, 16 (22). pp. 8044-8050. ISSN 1530-437X

D

Doufesh, H. and Ibrahim, F. and Ismail, N.A. and Wan Ahmad, W.A. (2016) Adaptive neuro-fuzzy inference system for predicting alpha band power of EEG during muslim prayer (SALAT). Biomedical Engineering: Applications, Basis and Communications, 28 (06). p. 1650043. ISSN 1016-2372

E

Emami, S.D. and Sulaiman, S.Z. and Kasmani, R.M. and Hamid, M.D. and Che Hassan, C.R. (2016) Effect of pipe configurations on flame propagation of hydrocarbons–air and hydrogen–air mixtures in a constant volume. Journal of Loss Prevention in the Process Industries, 39. pp. 141-151. ISSN 0950-4230

F

Fayeka, M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2016) Effect of aluminum addition on the electrochemical corrosion behavior of Sn–3Ag–0.5Cu solder alloy in 3.5 wt% NaCl solution. Journal of Materials Science: Materials in Electronics, 27 (11). pp. 12193-12200. ISSN 0957-4522

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27-30 January 2016, IIT Bombay, Mumbai, India.

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27 - 30 January 2016, IIT Bombay, Mumbai, India.

G

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Effect of Oxidation Temperature on Physical and Electrical Properties of Sm2O3 Thin-Film Gate Oxide on Si Substrate. IEEE/TMS Journal of Electronic Materials, 45 (10). pp. 5302-5312. ISSN 0361-5235

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Physical and electrical properties of thermal oxidized Sm2O3 gate oxide thin film on Si substrate: Influence of oxidation durations. Thin Solid Films, 606. pp. 80-86. ISSN 0040-6090

Goh, Y. and Haseeb, A.S. Md. Abdul (2016) Studies on electrodeposition behavior of Sn–Bi alloys in plating baths modified by hydroquinone and gelatin. Journal of Materials Science, 51 (12). pp. 5823-5833. ISSN 0022-2461

Gunawardena, D.S. and Lai, M.H. and Lim, Kok Sing and Malekmohammadi, A. and Ahmad, Harith (2016) Fabrication of thermal enduring FBG sensor based on thermal induced reversible effect. Sensors and Actuators A: Physical, 242. pp. 111-115. ISSN 0924-4247

Gunawardena, D.S. and Mat-Sharif, K.A. and Lai, M.H. and Lim, Kok Sing and Tamchek, N. and Omar, N.Y.M. and Emami, S.D. and Muhamad-Yasin, S.Z. and Zulkifli, M.I. and Yusoff, Z. and Yang, H.Z. and Abdul-Rashid, H.A. and Ahmad, Harith (2016) Thermal Activation of Regenerated Grating in Hydrogenated Gallosilicate Fiber. IEEE Sensors Journal, 16 (6). pp. 1659-1664. ISSN 1530-437X

Gururajapathy, S.S. and Mokhlis, Hazlie and Illias, Hazlee Azil and Bakar, Ab Halim Abu and Awalin, L.J. (2016) Fault identification in an unbalanced distribution system using support vector machine. Journal of Electrical Systems, 12 (4). pp. 786-800. ISSN 1112-5209

H

Halim, S.A. and Bakar, Ab Halim Abu and Illias, Hazlee Azil and Hassan, N.H.N. and Mokhlis, Hazlie and Terzija, V. (2016) Lightning back flashover tripping patterns on a 275/132 kV quadruple circuit transmission line in Malaysia. IET Science, Measurement & Technology, 10 (4). pp. 344-354. ISSN 1751-8822

Hamida, B.A. and Azooz, S.M. and Jasim, A.A. and Eltaif, T. and Khan, S. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Flat-gain wide-band erbium doped fiber amplifier with hybrid gain medium. Optik, 127 (5). pp. 2481-2484. ISSN 0030-4026

Harun, Sulaiman Wadi and Shamsudin, H. and Ahmad, Harith and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2016) Development of CW and pulsed thulium ytterbium co-doped fiber lasers using nano-engineered yttria-alimina-silica based gain medium in conjunction with cladding pumping technique. Current Nanoscience, 12 (3). pp. 299-308. ISSN 1573-4137

Heris, S.Z. and Fallahi, M. and Shanbedi, M. and Amiri, A. (2016) Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids. Heat and Mass Transfer, 52 (1). pp. 85-93. ISSN 0947-7411

Hossain, I. and Choudhury, I.A. and Mamat, A. and Shahid, A. and Khan, A.N. and Hossain, A. (2016) Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique. Advances in Fuzzy Systems, 2016. pp. 1-9. ISSN 1687-7101

Hosseini, S. and Azari, P. and Aeinehvand, M.M. and Rothan, H.A. and Djordjevic, I. and Martinez-Chapa, S.O. and Madou, M.J. (2016) Intrant ELISA: A Novel Approach to Fabrication of Electrospun Fiber Mat-Assisted Biosensor Platforms and Their Integration within Standard Analytical Well Plates. Applied Sciences, 6 (11). p. 336. ISSN 2076-3417

I

Ibrahim, S. and Charinpanitkul, T. and Kobatake, E. and Sriyudthsak, M. (2016) Nanowires Nickel Oxide and Nanospherical Manganese Oxide Synthesized via Low Temperature Hydrothermal Technique for Hydrogen Peroxide Sensor. Journal of Chemistry, 2016. pp. 1-6. ISSN 2090-9063

Illias, Hazlee Azil and Zahari, A.F.M. and Mokhlis, Hazlie (2016) Optimisation of PID controller for load frequency control in two-area power system using evolutionary particle swarm optimisation. Journal of Electrical Systems, 12 (2). pp. 315-324. ISSN 1112-5209

Isa, H.M. and Amer, N.H. and Wan Mahadi, W.N.L. and Ramli, R. (2016) Using magnetic field analysis to evaluate the suitability of a magnetic suspension system for lightweight vehicles. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (5). pp. 3924-3932. ISSN 1300-0632

Islam, M.M. and Masjuki, Haji Hassan and Kalam, M.A. and Zulkifli, N.W.M. and Habibullah, M. and Hossain, M.M. (2016) Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137. pp. 322-329. ISSN 0959-6526

Islam, M.T. and Abdullah, A.B. and Shahir, S.A. and Kalam, M.A. and Masjuki, Haji Hassan and Shumon, R. and Rashid, M.H. (2016) A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137. pp. 728-740. ISSN 0959-6526

Izadyar, N. and Ong, H.C. and Chong, W.T. and Mojumder, J.C. and Leong, K.Y. (2016) Investigation of potential hybrid renewable energy at various rural areas in Malaysia. Journal of Cleaner Production, 139. pp. 61-73. ISSN 0959-6526

J

Jaddoa, M.F. and Razak, M.Z.A. and Salim, M.A.M. and Sharbirin, A.S. and Nayan, N. and Ismail, Mohammad Faizal and Ahmad, Harith (2016) Tunable single wavelength erbium-doped fiber ring laser based on in-line Mach-Zehnder strain. Optik, 127 (20). pp. 8326-8332. ISSN 0030-4026

Jamaludin, J. and Rahim, N.A. and Hew, W.P. (2016) An 11-switch multilevel inverter with a modified space vector modulation. Turkish Journal of Electrical Engineering and Computer Sciences, 24. pp. 171-183. ISSN 1300-0632

K

Kamarudin, M.A. and Khan, A.A. and Williams, C. and Rughoobur, G. and Said, Suhana Mohd and Nosheen, S. and Flewitt, A.J. and Qasim, M.M. and Wilkinson, T.D. (2016) Self-assembled liquid crystalline nanotemplates and their incorporation in dye-sensitised solar cells. Electrochimica Acta, 222. pp. 657-667. ISSN 0013-4686

Karimzadeh, A. and Ayatollahi, M.R. and Bushroa, A.R. (2016) Effect of Dental Restorative Material Type and Shade on Characteristics of Two-Layer Dental Composite Systems. Latin American Journal of Solids and Structures, 13 (10). pp. 1851-1865. ISSN 1679-7825

Khalid, Mohammad and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Walvekar, Rashmi and Ching, Yern Chee and Ketabchi, Mohammad Reza (2016) Mechanical and physical performance of cowdung-based polypropylene biocomposites. Polymer Composites, 39 (1). pp. 288-296. ISSN 0272-8397

Khan, M.I. and Yasmin, T. and Khan, N.B. (2016) Safety issues associated with the use and operation of natural gas vehicles: learning from accidents in Pakistan. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (8). pp. 2481-2497. ISSN 1678-5878

Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2016) The limits of stability and muscle activity in middle-aged adults during static and dynamic stance. Journal of Biomechanics, 49 (16). pp. 3943-3948. ISSN 0021-9290

L

Latiff, A.A. and Rusdi, M.F.M. and Jusoh, Z. and Yasin, M. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) 1941 nm Q-switched thulium-doped fiber laser with a multi-layer black phosphorus saturable absorber. Optoelectronics and Advanced Materials-Rapid Communications, 10 (11-12). pp. 801-806. ISSN 1842-6573

Latiff, Anas Abdul and Shamsudin, Hanafiah and Aziz, Nur Suhaili Abd and Hashim, Abdul Manaf and Irawati, Ninik and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Mode-locked generation in thulium-doped fiber linear cavity laser. Optik, 127 (23). pp. 11119-11123. ISSN 0030-4026

Lee, G. and Bae, J. and Lee, S. and Jang, M. and Park, H. (2016) Monthly chlorophyll-a prediction using neuro-genetic algorithm for water quality management in Lakes. Desalination and Water Treatment, 57 (55). pp. 26783-26791. ISSN 1944-3994

Lee, G. and Othman, F. and Ibrahim, S. and Jang, M. (2016) Determination of the forecasting-model parameters by statistical analysis for development of algae warning system. Desalination and Water Treatment, 57 (55). pp. 26773-26782. ISSN 1944-3994

Leong, W.C. and Mekhilef, Saad and Sulaiman, E. and Krishnamurthi, M. (2016) Design of ramp-time current control with dynamic fuzzy bandwidth for wireless power transmission. International Journal of Microwave and Wireless Technologies, 8 (08). pp. 1173-1182. ISSN 1759-0787

Leong, Y.M. and Haseeb, A.S. Md. Abdul (2016) Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition. Materials, 9 (7). p. 522. ISSN 1996-1944

Lokman, M.Q. and Rahim, H.R.A. and Harun, Sulaiman Wadi and Hornyak, G.L. and Mohammed, W.S. (2016) Light backscattering (e.g. reflectance) by ZnO nanorods on tips of plastic optical fibres with application for humidity and alcohol vapour sensing. Micro & Nano Letters, 11 (12). pp. 832-836. ISSN 1750-0443

Lokman, M.Q. and Rahim, H.R.A. and Yasin, M. and Jusoh, Z. and Harun, Sulaiman Wadi (2016) Evaluation of light backscattering by zinc oxide nanorods on fiber end of silica optical fiber. Optoelectronics and Advanced Materials-Rapid Communications, 10 (11-12). pp. 885-888. ISSN 1842-6573

M

Mahamudul, H. and Rahman, M.M. and Metselaar, H.S.C. and Mekhilef, Saad and Shezan, S.A. and Sohel, R. and Sayuti, Mohd and Badiuzaman, W.N.I. (2016) Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016. pp. 1-8. ISSN 1110-662X

Mahdi, R.I. and Al-Bahnam, N.J. and Abbo, A.I. and Hmood, J.K. and Majid, W.H.A. (2016) Optimization of sintering temperature for the enhancement of pyroelectric properties of lead-free 0.88(Na 0.5 Bi 0.5 )TiO 3 –0.084(K 0.5 Bi 0.5 )TiO 3 –0.036BaTiO 3 piezoelectric ceramics. Journal of Alloys and Compounds, 688. pp. 77-87. ISSN 0925-8388

Mansouri, I. and Safa, M. and Ibrahim, Z. and Kisi, O. and Tahir, M.M. and Baharom, S. and Azimi, M. (2016) Strength prediction of rotary brace damper using MLR and MARS. Structural Engineering and Mechanics, 60 (3). pp. 471-488. ISSN 1225-4568

Markom, A.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation. Jurnal Teknologi, 78 (3). pp. 19-23. ISSN 0127-9696

Markom, A.M. and Paul, M.C. and Dhar, A. and Das, S. and Yasin, M. and Apsari, R. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) L-band mode-locked fiber laser delivering adjustable bright and dark pulses with erbium zirconia yttria aluminum co-doped fiber. Optoelectronics and Advanced Materials, Rapid Communications, 10 (7-8). pp. 464-466. ISSN 1842-6573

Masaoud, A. and Hew, Wooi Ping and Mekhilef, Saad and Belkamel, H. (2016) Highly efficient three-phase three-level multilevel inverter employing different commutation strategies. Turkish Journal of Electrical Engineering and Computer Sciences, 24. pp. 76-87. ISSN 1300-0632

Mehrali, M. and Sadeghinezhad, E. and Akhiani, A.R. and Latibari, S.T. and Talebian, S. and Dolatshahi-Pirouz, A. and Metselaar, H.S.C. and Mehrali, M. (2016) An ecofriendly graphene-based nanofluid for heat transfer applications. Journal of Cleaner Production, 137. pp. 555-566. ISSN 0959-6526

Mihankhah, T. and Delnavaz, M. and Khaligh, N.G. (2016) Eco-friendly biodiesel production from olive oil waste using solar energy. Energy Sources, Part A, 38 (24). pp. 3668-3672. ISSN 1556-7036

Mohd Zainuri, M.A.A. and Radzi, M.A.M. and Soh, A.C. and Mariun, N. and Rahim, N.A. (2016) Improved ADALINE Harmonics Extraction Algorithm for Boosting Performance of Photovoltaic Shunt Active Power Filter under Dynamic Operations. Journal of Electrical Engineering and Technology, 11 (6). pp. 1714-1728. ISSN 1975-0102

Muhamad, M.R. and Zou, Y. and Sugiyama, H. (2016) Investigation of the finishing characteristics in an internal tube finishing process by magnetic abrasive finishing combined with electrolysis. Transactions of the Institute of Metal Finishing, 94 (3). pp. 159-165. ISSN 0020-2967

N

Nasrinahar, A. and Chuah, J.H. (2016) Effective route planning of a mobile robot for static and dynamic obstacle with fuzzy logic / Amir Nasrinahar and Joon Huang Chuah. In: 6th IEEE International Conference on Control System, Computing and Engineering , 25 - 27 November 2016, Penang, Malaysia.

Niranjan, H. and Sivasankaran, S. and Bhuvaneswari, M. (2016) Analytical and Numerical Study on Magnetoconvection Stagnation-Point Flow in a Porous Medium with Chemical Reaction, Radiation, and Slip Effects. Mathematical Problems in Engineering, 2016. pp. 1-12. ISSN 1024-123X

Nodehi, S. and Mohammed, W.S. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Demonstration of a Periodic Passband Filter Based on Coupled Microfiber Knots. IEEE Photonics Technology Letters, 28 (10). pp. 1061-1064. ISSN 1041-1135

Nodehi, S. and Mohammed, W.S. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Fabrication and characterization of high order filter based on resonance in hybrid multi-knots microfiber structure. Optics & Laser Technology, 78. pp. 120-124. ISSN 0030-3992

Nodehi, S. and Mohammed, W.S. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Realization of spectral tunable filter based on thermal effect in microfiber structure. Optical Fiber Technology, 28. pp. 38-41. ISSN 1068-5200

O

Oon, C.S. and Ateeq, M. and Shaw, A. and Wylie, S. and Al-Shamma'a, A. and Kazi, S.N. (2016) Detection of the gas–liquid two-phase flow regimes using non-intrusive microwave cylindrical cavity sensor. Journal of Electromagnetic Waves and Applications, 30 (17). pp. 2241-2255. ISSN 0920-5071

P

Peck, S.M. and Hua, N.T. and Seyed, M.M. (2016) Classification of urinary dielectric properties for diabetes and kidney disease using support vector machine. In: The 16th International Conference on Biomedical Engineering 2016, 7-10 December 2016, Singapore.

Q

Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34 (6). pp. 549-564. ISSN 1002-0721

Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41 (2). pp. 106-131. ISSN 1040-8436

R

Rahman, A.Z.M.S. and Haseeb, A.S. Md. Abdul and Xu, Q. and Evslin, J. and Cinausero, M. (2016) Laser excited novel near-infrared photoluminescence bands in fast neutron-irradiated MgO·nAl2O3. Radiation Physics and Chemistry, 125. pp. 122-126. ISSN 0969-806X

Rahman, N.I.A. and Md Dawal, Siti Zawiah (2016) The mental workload and alertness levels of train drivers under simulated conditions based on electroencephalogram signals. Malaysian Journal of Public Health Medicine, 16 (Sppl.1). pp. 115-123. ISSN 1675-0306

S

Saidin, N. and Zen, D.I.M. and Ahmad, F. and Haris, H. and Ahmad, Harith and Dimyati, K. and Harun, Sulaiman Wadi and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2016) Q-switched 2µm thulium bismuth co-doped fiber laser with multi-walled carbon nanotubes saturable absorber. Optics & Laser Technology, 83. pp. 89-93. ISSN 0030-3992

Samion, M.Z. and Ismail, Mohammad Faizal and Muhamad, A. and Sharbirin, A.S. and Harun, Sulaiman Wadi and Ahmad, Harith (2016) Tunable passively Q-switched thulium-doped fiber laser operating at 1.9 μm using arrayed waveguide grating (AWG). Optics Communications, 380. pp. 195-200. ISSN 0030-4018

Sazzad, B.S. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2016) Retardation of oxidation and material degradation in biodiesel: a review. RSC Advances, 6 (65). pp. 60244-60263. ISSN 2046-2069

Seyedzadeh, S. and Moghaddasi, M. and Anas, S.B.A. (2016) Effects of fibre impairments in variable weight optical code division multiple access system. IET Optoelectronics, 10 (6). pp. 221-226. ISSN 1751-8768

Seyedzadeh, S. and Moghaddasi, M. and Anas, S.B.A. (2016) Variable-weight optical code division multiple access system using different detection schemes. Journal of Telecommunications and Information Technology, 2016 (3). pp. 50-59. ISSN 1509-4553

Shamsudin, H. and Latiff, A.A. and Razak, N.N. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Multi-wavelength thulium-doped fiber laser operating at slope efficiency of 16.57% in linear cavity configuration. Optoelectronics and Advanced Materials, Rapid Communications, 10 (3-4). pp. 129-132. ISSN 1842-6573

Shamsudin, H. and Latiff, A.A. and Razak, N.N. and Jusoh, Z. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Performance comparison of single-mode single-cladding thulium doped and thulium/holmium co-doped fiber lasers in ring cavity. Journal of Optoelectronics and Advanced Materials, 18 (9-10). pp. 757-762. ISSN 1454-4164

Shumon, M.R.H. and Ahmed, S. and Ahmed, S. (2016) Fuzzy analytical hierarchy process extent analysis for selection of end of life electronic products collection system in a reverse supply chain. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (1). pp. 157-168. ISSN 0954-4054

Singh, G. and Haseeb, A.S. Md. Abdul (2016) Effect of Pedestal Temperature on Bonding Strength and Deformation Characteristics for 5N Copper Wire Bonding. IEEE/TMS Journal of Electronic Materials, 45 (6). pp. 3244-3248. ISSN 0361-5235

Soltanian, M.R.K. and Sharbirin, A.S. and Ariannejad, M.M. and Amiri, I.S. and De La Rue, R.M. and Brambilla, G. and Rahman, B.M.A. and Grattan, K.T.V. and Ahmad, Harith (2016) Variable Waist-Diameter Mach–Zehnder Tapered-Fiber Interferometer as Humidity and Temperature Sensor. IEEE Sensors Journal, 16 (15). pp. 5987-5992. ISSN 1530-437X

T

Tan, A.T. and Tan, A.W. and Yusof, F. (2016) Influence of high-power-low-frequency ultrasonic vibration time on the microstructure and mechanical properties of lead-free solder joints. Journal of Materials Processing Technology, 238. pp. 8-14. ISSN 0924-0136

Tan, C.J. and Aslian, A. and Abe, Y. and Mori, K. (2016) Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles. The International Journal of Advanced Manufacturing Technology, 87 (5-8). pp. 1705-1711. ISSN 0268-3768

TermehYousefi, A. and Kadri, N.A. (2016) Morphology optimization of highly oriented carbon nanotubes for bioengineering applications. Materials Research Innovations, 20 (4). pp. 268-271. ISSN 1432-8917

Ting, C.H. and Ramesh, S. and Lwin, N. and Sutharsini, U. (2016) Sintering properties and low-temperature degradation behaviour of Y-TZP ceramics. Journal of Ceramic Processing Research, 17 (12). pp. 1265-1269. ISSN 1229-9162

Tiu, Z.C. and Zarei, A. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Multi-wavelength mode-locked erbium-doped fiber laser with photonic crystal fiber in figure-of-eight cavity. Optik, 127 (15). pp. 5894-5898. ISSN 0030-4026

Tiu, Zian Cheak and Ahmad, Harith and Zarei, A. and Harun, Sulaiman Wadi (2016) Generation of multi-wavelength erbium-doped fiber laser by using MoSe2 thin film as nonlinear medium and stabilizer. Chinese Optics Letters, 14 (4). 041901-41904. ISSN 1671-7694

Tiu, Zian Cheak and Aidit, S.N. and Hassan, N.A. and Ismail, Mohammad Faizal and Ahmad, Harith (2016) Single and Double Brillouin Frequency Spacing Multi-Wavelength Brillouin Erbium Fiber Laser With Micro-Air Gap Cavity. IEEE Journal of Quantum Electronics, 52 (9). pp. 1-5. ISSN 0018-9197

U

Uddin, Md Jasim and Ullah, Mohammad Habib and Latef, Tarik Abdul and Mahadi, Wan Nor Liza (2016) Inversion response to optimize lumped-element circuits for metamaterial. International Journal of Circuit Theory and Applications, 45 (1). pp. 36-46. ISSN 0098-9886

Ul Islam, M.M. and Mo, K.H. and Alengaram, U.J. and Jumaat, M.Z. (2016) Durability properties of sustainable concrete containing high volume palm oil waste materials. Journal of Cleaner Production, 137. pp. 167-177. ISSN 0959-6526

W

Wong, K.T. and Eu, N.C. and Ibrahim, Shaliza and Kim, H. and Yoon, Y. and Jang, Min (2016) Recyclable magnetite-loaded palm shell-waste based activated carbon for the effective removal of methylene blue from aqueous solution. Journal of Cleaner Production, 115. pp. 337-342. ISSN 0959-6526

Wong, S.Y. and Yap, K.S. and Yap, H.J. (2016) A Constrained Optimization based Extreme Learning Machine for noisy data regression. Neurocomputing, 171. pp. 1431-1443. ISSN 0925-2312

Y

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. Energy Conversion and Management, 114. pp. 38-49. ISSN 0196-8904

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Montazer, E. and Arzani, H.K. and Sadri, R. and Dahari, M. and Kazi, S.N. (2016) Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties. International Communications in Heat and Mass Transfer, 72. pp. 10-15. ISSN 0735-1933

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Goodarzi, M. and Amiri, A. and Sarsam, W.S. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer, 77. pp. 15-21. ISSN 0735-1933

Yaseen, Z.M. and Jaafar, O. and Deo, R.C. and Kisi, O. and Adamowski, J. and Quilty, J. and El-Shafie, A. (2016) Stream-flow forecasting using extreme learning machines: A case study in a semi-arid region in Iraq. Journal of Hydrology, 542. pp. 603-614. ISSN 0022-1694

Yau, Y.H. and Chang, C.P. (2016) The fieldwork and control engineering studies on thermal comfort of occupants in a conventional office building in the tropics. Building Services Engineering Research and Technology, 37 (3). pp. 355-373. ISSN 0143-6244

Yau, Y.H. and Heng, K.L. (2016) Modeling of a hybrid solar radiant cooling system in a high-rise building in Malaysia. In: The 14th International Conference of Indoor Air Quality., 03 - 08 July 2016, Ghent, Belgium.

Yau, Y.H. and Lian, Y.C. (2016) A computational fluid dynamics study of the effects of buoyancy on air flow surrounding a building. Building Services Engineering Research and Technology, 37 (3). pp. 257-271. ISSN 0143-6244

Yau, Y.H. and Lim, K.S. (2016) Energy analysis of green office buildings in the tropics—Photovoltaic system. Energy and Buildings, 126. pp. 177-193. ISSN 0378-7788

Yew, M.K. and Mahmud, H.B. and Shafigh, P. and Ang, B.C. and Yew, M.C. (2016) Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete. Materials and Structures, 49 (4). pp. 1221-1233. ISSN 1359-5997

Yong, J.S. and Ung, N.M. and Jamalludin, Z. and Malik, R.A. and Wong, J.H.D. and Liew, Y.M. and Ng, K.H. (2016) Dosimetric impact of applicator displacement during high dose rate (HDR) Cobalt-60 brachytherapy for cervical cancer: A planning study. Radiation Physics and Chemistry, 119. pp. 264-271. ISSN 0969-806X

Yong, K.W. and Li, Y. and Liu, F. and Gao, B. and Lu, T.J. and Wan Abas, W.A.B. and Wan Safwani, W.K.Z. and Pingguan-Murphy, B. and Ma, Y. and Xu, F. and Huang, G. (2016) Paracrine Effects of Adipose-Derived Stem Cells on Matrix Stiffness-Induced Cardiac Myofibroblast Differentiation via Angiotensin II Type 1 Receptor and Smad7. Scientific Reports, 6 (1). p. 33067. ISSN 2045-2322

Yong, K.W. and Wan Safwani, W.K.Z. and Xu, F. and Zhang, X. and Choi, J.R. and Wan Abas, W.A.B. and Omar, S.Z. and Noor Azmi, M.A. and Chua, K.H. and Pingguan-Murphy, B. (2016) Assessment of tumourigenic potential in long-term cryopreserved human adipose-derived stem cells. Journal of Tissue Engineering and Regenerative Medicine, 11 (8). pp. 2217-2226. ISSN 1932-6254

Yusof, F. and Muhamad, M.R. and Moshwan, R. and Jamaludin, M.F. and Miyashita, Y. (2016) Effect of Surface States on Joining Mechanisms and Mechanical Properties of Aluminum Alloy (A5052) and Polyethylene Terephthalate (PET) by Dissimilar Friction Spot Welding. Metals, 6 (5). p. 101. ISSN 2075-4701

Yusof, N. and Soin, N. and Noorakma, A.C.W. (2016) Simulation study of convex corner undercutting in KOH and TMAH for a MEMS piezoresistive accelerometer. Jurnal Teknologi, 78 (6). pp. 69-76. ISSN 0127-9696

Yusof, Y. and Zaidi, M.I. and Johan, M.R. (2016) Enhanced Structural, Thermal, and Electrical Properties of Multiwalled Carbon Nanotubes Hybridized with Silver Nanoparticles. Journal of Nanomaterials (JNM), 2016. pp. 1-9. ISSN 1687-4110

Z

Zabed, H. and Faruq, G. and Boyce, A.N. and Sahu, J.N. and Ganesan, P. (2016) Evaluation of high sugar containing corn genotypes as viable feedstocks for decreasing enzyme consumption during dry-grind ethanol production. Journal of the Taiwan Institute of Chemical Engineers, 58. pp. 467-475. ISSN 1876-1070

Zabed, H. and Faruq, G. and Sahu, J.N. and Boyce, A.N. and Ganesan, P. (2016) A comparative study on normal and high sugary corn genotypes for evaluating enzyme consumption during dry-grind ethanol production. Chemical Engineering Journal, 287. pp. 691-703. ISSN 1385-8947

Zadry, H.R. and Md Dawal, Siti Zawiah and Taha, Z. (2016) Development of statistical models for predicting muscle and mental activities during repetitive precision tasks. International Journal of Occupational Safety and Ergonomics, 22 (3). pp. 374-383. ISSN 1080-3548

Zainuri, M.A.A.M. and Radzi, M.A.M. and Soh, A.C. and Mariun, N. and Rahim, N.A. (2016) DC-link capacitor voltage control for single-phase shunt active power filter with step size error cancellation in self-charging algorithm. IET Power Electronics, 9 (2). pp. 323-335. ISSN 1755-4535

Zainuri, M.A.A.M. and Radzi, M.A.M. and Soh, A.C. and Mariun, N. and Rahim, N.A. and Hajighorbani, S. (2016) Fundamental active current adaptive linear neural networks for photovoltaic shunt active power filters. Energies, 9 (6). p. 397. ISSN 1996-1073

Zalnezhad, E. and Maleki, E. and Banihashemian, S.M. and Park, J.W. and Kim, Y.B. and Sarraf, M. and Sarhan, Ahmed Aly Diaa Mohammed and Ramesh, Singh (2016) Wettability, structural and optical properties investigation of TiO2 nanotubular arrays. Materials Research Bulletin, 78. pp. 179-185. ISSN 0025-5408

Zamri, M.I.P. and Cordova, F. and Khairuddin, A.S.M. and Mokhtar, N. and Yusof, R. (2016) Tree species classification based on image analysis using Improved-Basic Gray Level Aura Matrix. Computers and Electronics in Agriculture, 124. pp. 227-233. ISSN 0168-1699

Zamzamzadeh, M. and Saifizul, A.A. and Ramli, R. and Soong, M.F. (2016) Dynamic simulation of brake pedal force effect on heavy vehicle braking distance under wet road conditions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3555-3563. ISSN 2229-8649

Zandi, J. and Ghazvinei, P.T. and Hashim, Roslan and Yusof, K.B.W. and Ariffin, J. and Motamedi, S. (2016) Mapping of regional potential groundwater springs using Logistic Regression statistical method. Water Resources, 43 (1). pp. 48-57. ISSN 0097-8078

Zargham, S. and Ward, T.A. and Ramli, R. and Badruddin, I.A. (2016) Topology optimization: a review for structural designs under vibration problems. Structural and Multidisciplinary Optimization, 53 (6). pp. 1157-1177. ISSN 1615-147X

Zavareh, M.A. and Sarhan, A.A.D. and Zavareh, P.A. and Bushroa, A.R. and Basirun, Wan Jefrey and Ismail, M.C. (2016) Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping. Ceramics International, 42 (4). pp. 5203-5210. ISSN 0272-8842

Zeimaran, E. and Mohan, S. and Pourshahrestani, S. and Pingguan-Murphy, B. and Kadri, N.A. and Murali, M.R. and Raghavendran, H.R.B. and Hasikin, K. and Kamarul, T. and Towler, M.R. (2016) Osteogenic differentiation of mesenchymal stem cells on a poly (octanediol citrate)/bioglass composite scaffold in vitro. Materials & Design, 109. pp. 434-442. ISSN 0261-3069

Zeimaran, E. and Pourshahrestani, S. and Djordjevic, I. and Pingguan-Murphy, B. and Kadri, N.A. and Wren, A.W. and Towler, M.R. (2016) Antibacterial properties of poly (octanediol citrate)/gallium-containing bioglass composite scaffolds. Journal of Materials Science: Materials in Medicine, 27 (1). pp. 1-11. ISSN 0957-4530

Zeimaran, E. and Pourshahrestani, S. and Shirazi, S.F.S. and Pingguan-Murphy, B. and Kadri, N.A. and Towler, M.R. (2016) Hydrothermal synthesis and characterisation of bioactive glass-ceramic nanorods. Journal of Non-Crystalline Solids, 443. pp. 118-124. ISSN 0022-3093

Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Misran, M. and Ibrahim, R. and Amiri, A. and Sadri, R. (2016) Exploration of the environmentally benign and highly effective approach for improving carbon nanotube homogeneity in aqueous system. Journal of Thermal Analysis and Calorimetry, 124 (2). pp. 815-825. ISSN 1388-6150

Zubir, Mohd Nashrul Mohd and Muhamad, M.R. and Amiri, A. and Badarudin, Ahmad and Kazi, Salim Newaz and Oon, C.S. and Abdullah, H.T. and Gharehkhani, S. and Yarmand, Hooman (2016) Heat transfer performance of closed conduit turbulent flow: Constant mean velocity and temperature do matter! Journal of the Taiwan Institute of Chemical Engineers, 64. pp. 285-298. ISSN 1876-1070

Zuikafly, S.N.F. and Ahmad, F. and Ibrahim, M.H. and Latiff, A.A. and Harun, Sulaiman Wadi (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Zuli'zam, R. and Nooh, A.B. and Ghazilla, R.A.R. (2016) Postural comfort of driver works space in vehicle package design geometry: A pilot study on malaysian drivers in sedan car and MPV. Malaysian Journal of Public Health Medicine, 16 (Sup. 2). pp. 84-88. ISSN 1675-0306

Zulkifli, A.Z. and Latiff, A.A. and Paul, M.C. and Yasin, M. and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Dual-wavelength nano-engineered Thulium-doped fiber laser via bending of singlemode-multimode-singlemode fiber structure. Optical Fiber Technology, 32. pp. 96-101. ISSN 1068-5200

Zulkifli, Ahmad Zarif and Masnan, S.E.F. and Azmi, N.M. and Akib, S.M. and Arof, Hamzah and Harun, Sulaiman Wadi (2016) A simple load sensor based on a bent single-mode-multimode-single-mode fiber structure. Sensors and Actuators A: Physical, 242. pp. 106-110. ISSN 0924-4247

Zulkifli, N.W.M. and Azman, S.S.N. and Kalam, M.A. and Masjuki, Haji Hassan and Yunus, R. and Gulzar, M. (2016) Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International, 93. pp. 555-562. ISSN 0301-679X

This list was generated on Tue Nov 19 10:13:15 2019 +08.