 | Up a level |
Palaniappan, P. L. Ranganayakidevi S. and Yahya, N.A. and Gonzalez, M.A.G. (2022) Colouration techniques for intrinsic staining of maxillofacial silicone prosthesis: A narrative review. Journal of Health and Translational Medicine, 25 (2). 122 -128. ISSN 18237339, DOI https://doi.org/10.22452/jummec.vol25no2.19.
Diab, Rana Abdelbaset and Yap, Adrian Ujin and Gonzalez, Maria Angela Garcia and Yahya, N.A. (2021) Impact of light-curing distance on the effectiveness of cure of bulk-fill resin-based composites. Saudi Dental Journal, 33 (8). pp. 1184-1189. ISSN 1013-9052, DOI https://doi.org/10.1016/j.sdentj.2021.01.003.
Chong, M.C. and Tang, L.Y. and Yahya, N.A. and Zaini, N.H. (2021) Factors affect social participation among older person in an urban community in Malaysia. In: ICN Congress nursing around the world, 02-04 November 2021, Virtual.
Dancer, C.E.J. and Yahya, N.A. and Berndt, T. and Todd, R.I. and de Portu, G. (2014) Effect of residual compressive surface stress on severe wear of alumina-silicon carbide two-layered composites. Tribology International, 74. pp. 87-92. ISSN 0301-679X, DOI https://doi.org/10.1016/j.triboint.2014.02.010.
Amer Nordin, Amer Siddiq and Abdul Kadir, R. and Yahya, N.A. and Zakaria, H. and Abd Rashid, Rusdi and Habil, H. (2014) Empowering Malaysian dentists to tobacco dependence treatment conduct. International Dental Journal, 64 (4). pp. 206-212. ISSN 0020-6539, DOI https://doi.org/10.1111/idj.12110.
Kadir, R.A. and Siddiq, A.N.A. and Yahya, N.A. and Abd Rashid, Rusdi and Hazli, Z. and Hussain, H. (2013) Audience response system (ARS) technology and dentist attendance in smoking cessation workshop. Sains Malaysiana, 42 (1). pp. 1-5. ISSN 0126-6039,
Yahya, N.A. and Todd, R.I. (2012) Influence of C doping on the fracture mode and abrasive wear of Al2O3. Journal of the European Ceramic Society, 32 (16). pp. 4003-4007. ISSN 0955-2219, DOI https://doi.org/10.1016/j.jeurceramsoc.2012.07.003.
Al-Makramani, B.M.A. and Razak, A.A.A. and Abu-Hassan, M.I. and Sulaiman, E. and Loon, L.J. and Yahya, N.A. (2011) Marginal Integrity of Turkom-Cera compared to other All-ceramic materials: effect of finish line. International Journal of Prosthodontics, 24 (4). pp. 379-381. ISSN 0893-2174,
Zabir, F.A. and Abdullah, A.S. and Abu Osman, Noor Azuan and Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty (2008) Acquiring anatomical representation of human maxilla for rapid maxillary expansion. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. Springer Berlin Heidelberg, pp. 387-389.
Zabir, F.A. and Abdullah, A.S. and Abu Osman, Noor Azuan and Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty (2008) Finite element analysis of an automated rapid maxillary expander (ARME). 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (21). pp. 417-419. ISSN 1680-0737, DOI 978-3-540-69138-9.
Yahya, N.A. and Lui, J.L. and Chong, K.W.F. and Lim, C.M. and Abu Kasim, N.H. and Radzi, Z. (2008) Push-out bond strength of luting agents to fibre-reinforced post: an in vitro study. 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (1 - 2). pp. 341-345. ISSN 1680-0737 978-3-540-69138-9,
Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty and Abu Osman, Noor Azuan and Yusof, Z.Y.M. and Mohd, F.N. and Noor, N.H.M. and Jamaludin, M. and Othman, S.A. and Obaidellah, U.H. and Mohamed, N.H. and Kadir, R. and Nambiar, P. (2008) Validation of cone beam CT scan for measurement of palatal depth in study casts. 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (1-2). pp. 758-761. ISSN 1680-0737 978-3-540-69138-9,
Yusoff, U.A. and Abu Kasim, Noor Hayaty and Yahya, N.A. and Abu Osman, Noor Azuan and Radzi, Z. (2008) The effect of light curing tip angulations on the shear bond strength of an orthodontic adhesive. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 2008, Kuala Lumpur.
Obaidellah, U.H. and Merican, Amir Feisal and Abu Osman, Noor Azuan and Yahya, N.A. and Radzi, Z. (2008) The facial soft tissue simulation of orthognathic surgery using biomechanical model. 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (1-2). pp. 751-757. ISSN 1680-0737,
Radzi, Zamri and Abu Kasim, Noor Hayaty and Yahya, N.A. and Gan, Seng Neon and Daud, N.M. and Saffai, L. and Fadhel, F.A. (2007) Impact strength of an experimental polyurethane-based polymer. Annals of Dentistry University of Malaya, 14. pp. 46-51. ISSN 0128-7532,
Abu Kasim, Noor Hayaty and Yahya, N.A. and Radzi, Z. and Basirun, Wan Jefrey and Ghani, A.A. (2007) Silverfil: its physical characterization. 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006, 15. pp. 134-136. ISSN 1680-0737, DOI 978-3-540-68016-1.
Radzi, Z. and Abu Kasim, Noor Hayaty and Yahya, N.A. and Abu Osman, Noor Azuan and Kassim, N.L. (2007) Standardization of distance and angulation of light curing unit tip using distometer. In: 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006, 2006, Kuala Lumpur.
Ibrahim, R. and Omar, M.A. and Goh, W.C. and Mohamad, M. and Muhamad, S. and Yahya, N.A. and Radzi, Z. and Abu Kasim, N.H. (2006) Fabrication of 316L stainless steel parts by injection moulding for biomedical application using a novel binder. In: 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006, 2006, Kuala Lumpur.
Radzi, Z. and Yahya, N.A. and Abu Kasim, N.H. and Ismail, N.H. and Ismail, N. and Zamzam, N. (2006) Shear bond strength of orthodontic adhesives on different tooth types: an in vitro study. Annals of Dentistry, 13 (1).
