 | Up a level |
Tan, C.Y. and Omar, Fatin Saiha and Saidi, Norshahirah M. and Farhana, N.K. and Ramesh, Subramaniam and Ramesh, Kasi (2019) Optimization of poly(vinyl alcohol-co-ethylene)-based gel polymer electrolyte containing nickel phosphate nanoparticles for dye-sensitized solar cell application. Solar Energy, 178. pp. 231-240. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2018.12.043.
Tan, C.Y. and Ramesh, S. and Teh, Y.C. and Tan, Y.M. and Yap, B.K. (2015) The effects of calcium-to-phosphorus ratio on the densification and mechanical properties of hydroxyapatite ceramic. International Journal of Applied Ceramic Technology, 12 (1). pp. 223-227. ISSN 1546-542X, DOI https://doi.org/10.1111/ijac.12249.
Ramesh, S. and Tan, S.S. and Bang, L.T. and Tan, C.Y. and Purbolaksono, J. and Ramesh, S. and Teng, W.D. (2015) Effects of sintering profile on the densification behaviour of forsterite ceramics. Journal of Ceramic Processing Research, 16 (6). pp. 722-728. ISSN 1229-9162,
Ramesh, S. and Gan, C.J. and Bang, L.T. and Niakan, A. and Tan, C.Y. and Purbolaksono, J. and Chandran, H. and Ramesh, S. and Yap, B.K. and Teng, W.D. (2015) Effects of two-step sintering on the properties of hydroxyapatite bioceramic. Journal of Ceramic Processing Research , 16 (6). pp. 683-689. ISSN 1229-9162,
Niakan, A. and Ramesh, S. and Ganesan, P. and Tan, C.Y. and Purbolaksono, J. and Chandran, H. and Ramesh, S. and Teng, W.D. (2015) Sintering behaviour of natural porous hydroxyapatite derived from bovine bone. Ceramics International, 41 (2, B). pp. 3024-3029.
Sutharsini, U. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Purbolaksono, J. and Teng, W.D. (2014) Effect of sintering holding time on low-temperature degradation of yttria stabilised zirconia ceramics. Materials Research Innovations, 18 (S6). S6-408-S6-411. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000988.
Chew, W.J. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Amiriyan, M. and Tolouei, R. and Teng, W.D. (2014) Sintering properties of zirconia-based ceramic composite. Materials Research Innovations, 18 (S6). S6-105-S6-108. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000939.
Khan, M.M. and Ramesh, S. and Bang, L.T. and Wong, Y.H. and Ubenthiran, S. and Tan, C.Y. and Purbolaksono, J. and Misran, H. (2014) Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic. Journal of Materials Engineering and Performance, 23 (12). pp. 4328-4335. ISSN 1059-9495, DOI https://doi.org/10.1007/s11665-014-1231-1.
Wong, Y.H. and Ramesh, S. and Tan, C.Y. and Projjal, B. (2014) Development of Sn–Cu–Sb alloys for making lead- and bismuth-free pewter. International Journal of Materials Research, 105 (2). pp. 183-187. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111011.
Sutharsini, U. and Ramesh, S. and Purbolaksono, J. and Tan, C.Y. and Teng, W.D. and Amiriyan, M. (2014) Low-temperature degradation and defect relationship in yttria-tetragonal zirconia polycrystal ceramic. Materials Research Innovations, 18 (S6). pp. 131-134.
Wong, Y.W. and Woon, H.S. and Tan, C.Y. (2014) Purification and conversion of Malaysian iron ores into industrial grade iron oxide colour pigment. Materials Research Innovations, 18 (S6). pp. 159-163.
Norakmal, A. and Ramesh, S. and Tan, C.Y. and Muchtar, A. and Yap, B.K. and Tolouei, R. (2014) Sintering studies of synthesised manganese-oxide-doped calcium phosphate via wet chemical precipitation method. Materials Research Innovations, 18 (S6). pp. 147-150.
Niakan, A. and Ramesh, Singh and Abd Shukor, Mohd Hamdi and Jahanshahi, A. and Tan, C.Y. and Ching, Yern Chee and Tolouei, R. (2014) Thermal treatment and properties of bovine hydroxyapatite. Materials Research Innovations, 18 (S6). pp. 117-120. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000941.
Teh, Y.C. and Tan, C.Y. and Ramesh, S. and Chin, K.M.C. and Tan, Y.M. and Yap, B.K. and Aimiriyan, M. (2014) The effect of sintering ramp rate on the sinterability of forsterite ceramics. Materials Research Innovations, 18 (S6). pp. 61-64.
Cheah, G.P. and Tan, C.Y. and Yusof, F. and Muchtar, A. and Lim, K.F. and Yap, B.K. (2014) The effects of sintering behavior of zirconia-doped hydroxyapatite for clinical applications. Materials Research Innovations, 18 (S6). pp. 151-154.
Lee, K.Y. and Chin, K.M. and Ramesh, S. and Tan, C.Y. and Teng, W.D. and Sopyan, I. (2012) Characterization of forsterite bioceramics. Advanced Materials Research, 576. pp. 195-198.
Lee, K.Y. and Chin, K.M. and Ramesh, Singh and Tan, C.Y. and Hassan, M.A. and Purbolaksono, J. and Teng, W.D. and Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.576.252.
Tolouei, R. and Singh, R. and Tan, C.Y. and Satgunam, M. and Amiriyan, M. (2012) Manufacturing of high toughness hydroxyapatite produced by wet chemical method. Applied Mechanics and Materials, 110-11. pp. 1289-1295. ISSN 3037852623,
Ramesh, Singh and Tan, C.Y. and Tolouei, R. and Amiriyan, M. and Purbolaksono, J. and Sopyan, I. and Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.08.011.
Ramesh, S. and Aw, K.L. and Tolouei, R. and Amiriyan, M. and Tan, C.Y. and Hamdi, M. and Purbolaksonoa, J. and Hassan, Mohamed Mohsen Abdel-Naeim and Teng, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842,
Tan, C.Y. and Rahman, R.N. and Kadir, H.A. and Tayyab, S. (2011) Conformational destabilization of Bacillus licheniformis α-amylase induced by lysine modification and calcium depletion. Acta Biochimica Polonica, 58 (3). pp. 405-412. ISSN 0001-527X, DOI 21887412 .
Tolouei, R. and Singh, R. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Effect of grain size on vickers microhardness and fracture toughness in calcium phosphate bioceramics. Applied Mechanics and Materials, 83. pp. 237-243.
Sivakumar, S. and Ramesh, Singh and Chin, K.L. and Tan, C.Y. and Teng, W.D. (2011) Effect of sintering profiles on the properties and ageing resistance of Y-TZP ceramic. International Journal of Automotive and Mechanical Engineering, 4. pp. 405-413. ISSN 2229-8649, DOI https://doi.org/10.15282/ijame.4.2011.3.0033.
Sopyan, I. and Nawawi, N.A. and Shah, Q.H. and Ramesh, S. and Tan, C.Y. and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26 (7). pp. 908-914. ISSN 1042-6914,
Ramesh, Singh and Tolouei, R. and Hamdi, M. and Purbolaksono, J. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137, DOI https://doi.org/10.2174/157341311798220538.
Tolouei, R. and Ramesh, S. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering effects on the densification of nanocrystalline hydroxyapatite. Science. ISSN 1095-9203,
Tan, C.Y. and Ramesh, S. and Aw, K.L. and Yeo, W.H. and Abd Shukor, Mohd Hamdi and Sopyan, I. (2008) Effect of powder calcination on the sintering of hydroxyapatite. Medical Journal of Malaysia, 63. pp. 87-88. ISSN 0300-5283,
Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Mahlia, T.M.I. and Tan, C.Y. and Ooi, J.K. and Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334,
Ramesh, S. and Tan, C.Y. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Teng, W.D. (2007) Consolidation of nanocrystalline hydroxyapatite powder. Science and Technology of Advanced Materials, 8 (1-2). pp. 124-130.
Tan, Y.M. and Tan, C.Y. and Singh, R. and Teh, Y.C. and Yap, B.K. (2015) The effect of heat treatment time on the formation of forsterite (Mg2SiO4). In: 7th International Conference On Bioinformatics And Biomedical Technology (ICBBT 2015), 23-24 May 2015, Singapore.
Ubenthiran, S. and Ramesh, S. and Purbolaksono, J. and Tan, C.Y. and Teng, W.D. and Amiriyan, M. (2013) Low temperature degradation and defect relationship in YSZ ceramic. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.
Cheah, G.P. and Tan, C.Y. and Farazila, Y. and Andanastuti, M. and Lim, K.F. and Yap, B.K. (2013) The effects of sintering behavior of zirconia dopedhydroxyapatite for clinical applications. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.
