 | Up a level |
Hourmand, Mehdi and Sarhan, Ahmed A. D. and Sayuti, Mohd and Hamdi, Mohd (2021) A comprehensive review on machining of titanium alloys. Arabian Journal for Science and Engineering, 46 (8). pp. 7087-7123. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-05420-1.
Badiuzaman, Wan Nur Izzati Wan and Sayuti, Mohd and Derahman, Nur Aqilah and Amran, Nor Amirah Mohd and Isa, M.A. Mohd (2018) Analysation of performances of CNC high speed milling machine using multi-walled carbon nanotubes as additives in cutting fluid. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 494-499. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201800028.
Dambatta, Yusuf S. and Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3959-3976. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-1689-3.
Ahmed, Syed Muzamil and Kazi, Salim Newaz and Khan, Ghulamullah and Sadri, Rad and Dahari, Mahidzal and Zubir, Mohd Nashrul Mohd and Sayuti, Mohd and Ahmad, Pervaiz and Ibrahim, Rushdan (2018) Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 54 (3). pp. 875-882. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-017-2176-3.
Derahman, Nur Aqilah and Sayuti, Mohd and Yusof, Farazila and Dambatta, Yusuf Suleiman and Amran, Nor Amirah Mohd and Badiuzaman, Wan Nur Izzati Wan (2018) Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting. Journal of Testing and Evaluation, 46 (4). p. 20170140. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20170140.
Muhamad, Martini Ridha and Jamaludin, Mohd Fadzil and Sayuti, Mohd and Yusof, Farazila and Zou, Yan Hua (2018) Effects of electrolysis on magnetic abrasive finishing of AA6063-T1 tube internal surface using combination machining tool. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 442-452. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201700266.
Shahnazar, Sheida and Bagheri, Samira and TermehYousefi, Amin and Mehrmashhadi, Javad and Sayuti, Mohd and Kadri, Nahrizul Adib (2018) Structure, mechanism, and performance evaluation of natural gas hydrate kinetic inhibitors. Reviews in Inorganic Chemistry, 38 (1). pp. 1-19. ISSN 0193-4929, DOI https://doi.org/10.1515/revic-2017-0013.
Mahamudul, H. and Rahman, M.M. and Metselaar, H.S.C. and Mekhilef, Saad and Shezan, S.A. and Sohel, R. and Sayuti, Mohd and Badiuzaman, W.N.I. (2016) Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016. pp. 1-8. ISSN 1110-662X, DOI https://doi.org/10.1155/2016/5917028.
Ooi, M.E. and Sayuti, Mohd and Sarhan, A.A.D. (2015) Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89. pp. 286-295. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.11.006.
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Fadzil, M. and Abd Shukor, Mohd Hamdi (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3657-z.
Sarhan, Ahmed Aly Diaa Mohammed and Sayuti, Mohd and Abd Shukor, Mohd Hamdi (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-012-3940-7.
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.154-155.721.
