Items where Author is "Sarhan, Ahmed Aly Diaa Mohammed"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 28.

Article

Hozoorbakhsh, Asghar and Abd Shukor, Mohd Hamdi and Sarhan, Ahmed Aly Diaa Mohammed and Ismail, Mohd Idris Shah and Tang, Chak Yin and Tsui, Gary Chi Pong (2019) CFD modelling of weld pool formation and solidification in a laser micro-welding process. International Communications in Heat and Mass Transfer, 101. pp. 58-69. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2019.01.001.

Zavareh, Mitra Akhtari and Sarhan, Ahmed Aly Diaa Mohammed and Karimzadeh, Ramin and Ramesh, Singh (2018) Analysis of corrosion protection behavior of Al2O3-TiO2 oxide ceramic coating on carbon steel pipes for petroleum industry. Ceramics International, 44 (6). pp. 5967-5975. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.12.175.

Ramesh, Singh and Loo, Zi Zhen and Tan, Chou Yong and Chew, Wai Jin Kelvin and Ching, Yern Chee and Tarlochan, Faris and Chandran, Hari and Krishnasamy, Sivakumar and Bang, Le Thi and Sarhan, Ahmed Aly Diaa Mohammed (2018) Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications. Ceramics International, 44 (9). pp. 10525-10530. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.03.072.

Dambatta, Yusuf S. and Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3959-3976. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-1689-3.

Ramesh, Singh and Zulkifli, Nurin Wahidah Mohd and Tan, Chou Yong and Wong, Yew Hoong and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sopyan, Iis and Bang, Le Thi and Sarhan, Ahmed Aly Diaa Mohammed (2018) Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International, 44 (8). pp. 8922-8927. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.02.086.

Ramesh, Singh and Sara Lee, K.Y. and Tan, Chou Yong and Wong, Yew Hoong and Alengaram, Ubagaram Johnson and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sutharsini, U. and Sarhan, Ahmed Aly Diaa Mohammed (2018) Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics. Ceramics International, 44 (16). pp. 19639-19645. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.07.215.

Ibrahim, Mahmoud Z. and Sarhan, Ahmed Aly Diaa Mohammed and Kuo, Tsung Yuan and Yusof, Farazila and Abd Shukor, Mohd Hamdi and Chien, Chi Sheng (2018) Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating. The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1977-1987. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-2354-6.

Al-Saeedi, Salman and Sarhan, Ahmed Aly Diaa Mohammed and Bushroa, Abdul Razak (2018) Investigating the Tribological Characteristics of Burnished Polyoxymethylene—ANFIS and FE Modeling. Tribology Transactions, 61 (5). pp. 880-888. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2018.1439208.

Abidou, Diaa and Sarhan, Ahmed Aly Diaa Mohammed and Yusoff, Nukman and Nik-Ghazali, Nik Nazri and Awang, Md Abu Omar and Hassan, Mohsen A. (2018) Numerical simulation of metal removal in laser drilling using meshless local Petrov–Galerkin collocation method. Applied Mathematical Modelling, 56. pp. 239-253. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2017.08.032.

Abdelrazek, Ali H. and Alawi, Omer A. and Kazi, Salim Newaz and Yusoff, Nukman and Chowdhury, Zaira Zaman and Sarhan, Ahmed Aly Diaa Mohammed (2018) A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop. International Communications in Heat and Mass Transfer, 95. pp. 161-170. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2018.05.002.

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, Ahmed Aly Diaa Mohammed and Akbari, J. and Abd Shukor, Mohd Hamdi and Ong, Zhi Chao (2016) Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance. Concurrent Engineering, 24 (1). pp. 83-93. ISSN 1063-293X, DOI https://doi.org/10.1177/1063293X15597047.

Zalnezhad, E. and Maleki, E. and Banihashemian, S.M. and Park, J.W. and Kim, Y.B. and Sarraf, M. and Sarhan, Ahmed Aly Diaa Mohammed and Ramesh, Singh (2016) Wettability, structural and optical properties investigation of TiO2 nanotubular arrays. Materials Research Bulletin, 78. pp. 179-185. ISSN 0025-5408, DOI https://doi.org/10.1016/j.materresbull.2016.01.035.

Ezazi, M.A. and Yusof, Farazila and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi and Fadzil, M. (2015) Employment of fiber laser technology to weld austenitic stainless steel 304 l with aluminum alloy 5083 using pre-placed activating flux. Materials & Design, 87. pp. 105-123. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.014.

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application. The International Journal of Advanced Manufacturing Technology. pp. 1-12.

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Optimizing the PVD TiN thin film coating as parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 281-290. ISSN 0268-3768,

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing, 14 (3). pp. 467-473. ISSN 2234-7593,

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-9. ISSN 0268-3768,

Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Fadzil, M. and Abd Shukor, Mohd Hamdi (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3657-z.

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,

Nik Pa, Nik Masmiati and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Optimizing the cutting parameters for better surface quality in 2.5 D cutting utilizing titanium coated carbide ball end mill. International Journal of Precision Engineering and Manufacturing, 13 (12). pp. 2097-2102. ISSN 2234-7593,

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557,

Sarhan, Ahmed Aly Diaa Mohammed and Sayuti, Mohd and Abd Shukor, Mohd Hamdi (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-012-3940-7.

Sarhan, Ahmed Aly Diaa Mohammed and Zalnezhad, E. and Hamdi, M. (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,

Sayuti, M. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768,

Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.154-155.721.

Conference or Workshop Item

Sarhan, Ahmed Aly Diaa Mohammed and Ooi, M.E. and Sayuti, M. and Abd Shukor, Mohd Hamdi (2014) Investigate the possibility of using carbon onion nanolubrication with DLC cutting tool to reduce the machining power consumption. In: Proceedings of the International Conference Advances in Mechanical & Automation Engineering, 07-08 June 2014, Rome, Italy.

Sarhan, Ahmed Aly Diaa Mohammed and Hassan, M.A. and Matsubara, A. and Abd Shukor, Mohd Hamdi (2011) Compensation of machine tool spindle error motions in the radial direction for accurate monitoring of cutting forces utilizing sensitive displacement sensors. In: Proceedings of the World Congress on Engineering, 2011, London.

Book

Ab Karim, Mohd Sayuti and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2013) Surface quality improvement in CNC end milling of aluminum alloy using nanolubrication system. Springer, pp. 669-683.

This list was generated on Fri Mar 29 14:48:19 2024 +08.