 | Up a level |
Dabbagh, V. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2017) Design and manufacturing of ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area. Measurement, 109. pp. 425-431. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2017.06.007.
Zavareh, M.A. and Sarhan, A.A.D. and Zavareh, P.A. and Bushroa, A.R. and Basirun, Wan Jefrey and Ismail, M.C. (2016) Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping. Ceramics International, 42 (4). pp. 5203-5210. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2015.12.044.
Amini, H. and Farzaneh, B. and Azimifar, F. and Sarhan, A.A.D. (2016) Sensor-less force-reflecting macro–micro telemanipulation systems by piezoelectric actuators. ISA Transactions, 64. pp. 293-302. ISSN 0019-0578, DOI https://doi.org/10.1016/j.isatra.2016.05.006.
Baghlani, V. and Mehbudi, P. and Akbari, J. and Nezhad, E.Z. and Sarhan, A.A.D. and Hamouda, A.M.S. (2016) An optimization technique on ultrasonic and cutting parameters for drilling and deep drilling of nickel-based high-strength Inconel 738LC superalloy with deeper and higher hole quality. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 877-888. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-015-7414-6.
Sarhan, A.A.D. and Matsubara, A. (2015) Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling. Robotics and Computer-Integrated Manufacturing, 34. pp. 133-139. ISSN 0736-5845, DOI https://doi.org/10.1016/j.rcim.2014.12.001.
Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, A.A.D. and Akbari, J. (2015) Nonlinear dynamic analysis of a new antibacklash gear mechanism design for reducing dynamic transmission error. Journal of Mechanical Design, 137 (5). p. 3. ISSN 1050-0472, DOI https://doi.org/10.1115/1.4029582.
Amini, H. and Rezaei, S.M. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2015) Transparency improvement by external force estimation in a time-delayed nonlinear bilateral teleoperation system. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 137 (5). p. 15. ISSN 0022-0434, DOI https://doi.org/10.1115/1.4029077.
Zavareh, M.A. and Sarhan, A.A.D. and Bushroa, Abdul Razak and Basirun, Wan Jefrey (2015) The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel. Ceramics International, 41 (4). pp. 5387-5396. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.102.
Hourmand, M. and Farahany, S. and Sarhan, A.A.D. and Noordin, M.Y. (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6491-2.
Amini, H. and Dabbagh, V. and Rezaei, S.M. and Zareinejad, M. and Mardi, N.A. and Sarhan, A.A.D. (2015) Robust control-based linear bilateral teleoperation system without force sensor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (2). pp. 579-587. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-014-0207-2.
Ooi, M.E. and Sayuti, Mohd and Sarhan, A.A.D. (2015) Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89. pp. 286-295. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.11.006.
Maher, I. and Eltaib, M.E.H. and Sarhan, A.A.D. and El-Zahry, R.M. (2015) Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining. The International Journal of Advanced Manufacturing Technology, 76 (5-8). pp. 1459-1467. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6379-1.
Barzani, M.M. and Zalnezhad, E. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. (2015) Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning. Measurement, 61. pp. 150-161. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.003.
Barzani, M.M. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. and Maher, I. (2015) Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement, 62. pp. 170-178. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.030.
Usop, Z. and Sarhan, A.A.D. and Mardi, N.A. and Wahab, M.N.A. (2015) Measuring of positioning, circularity and static errors of a CNC vertical machining centre for validating the machining accuracy. Flow Measurement and Instrumentation, 61. pp. 39-50. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.025.
Masmiati, N. and Sarhan, A.A.D. (2015) Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach. Measurement, 60. pp. 267-275. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.002.
Maher, I. and Sarhan, A.A.D. and Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. The International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6243-3.
Ghafarirad, H. and Rezaei, S.M. and Sarhan, A.A.D. and Zareinejad, M. (2015) Continuous dynamic modelling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behaviour analysis. Mathematical and Computer Modelling of Dynamical Systems, 21 (2). pp. 130-152. ISSN 1387-3954,
Yip, M.W. and Barnes, S. and Sarhan, A.A.D. (2015) Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer Using CO2Laser. Journal of Manufacturing Science and Engineering, 137 (3). 031010. ISSN 1087-1357, DOI https://doi.org/10.1115/1.4029831.
Marashi, H. and Sarhan, A.A.D. and Hamdi, M. (2015) Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel. Applied Surface Science, 357 (A). pp. 892-907. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2015.09.105.
Maher, I. and Sarhan, A.A.D. and Barzani, M.M. and Hamdi, M. (2015) Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production. Journal of Cleaner Production, 108 (A). pp. 247-255. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.06.047.
Al-Saeedi, S. and Sarhan, A.A.D. and Bushroa, A.R. (2015) Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach. Tribology Transactions, 58 (2). pp. 240-246. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2014.962205.
Sayuti, M. and Sarhan, A.A.D. and Tanaka, T. and Abd Shukor, Mohd Hamdi and Saito, Y. (2012) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. The International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768,
Sarhan, A.A.D. and El-Zahry, R.M. (2011) Monitoring of tool wear and surface roughness in end-milling for intelligent machining. International Journal of the Physical Sciences, 6 (10). pp. 2380-2392. ISSN 1992-1950, DOI https://doi.org/10.5897/IJPS10.577.
Sarhan, A.A.D. and Matsubara, A. and Hassan, M.A. (2011) High-precision machining by measuring and compensating the error motion of spindleâs axis of rotation in radial direction. Electrical Engineering and Intelligent Systems. pp. 347-359.
Sarhan, A.A.D. and Matsubara, A. (2012) Investigate the characterization of the machine tool spindle stiffness in radial direction for precise monitoring of cutting forces for intelligent machining. In: Canadian Society for Mechanical Engineering (CSME) International Congress, 04-06 Jun 2012, Manitoba, Canada.
Hassan, M.A. and Sarhan, A.A.D. and Amano, A. (2011) Effect of muscle active force and fiber orientation on the left ventricle mechanics of human heart. In: World Congress on Engineering 2011, 06-08 Jul 2011, London,UK .
