Items where Author is "Masjuki, Haji Hassan"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 218.

Article

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14237206.

Gul, Mustabshirha and Zulkifli, Nurin Wahidah Mohd and Kalam, Md Abul and Masjuki, Haji Hassan and Mujtaba, Muhammad Abbas and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and Yusoff, Mohd Nur Ashraf Mohd and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2021.01.033.

Mujtaba, M. A. and Kalam, Md Abul and Masjuki, Haji Hassan and Soudagar, Manzoore Elahi M. and Khan, Haris Mehmood and Fayaz, H. and Farooq, M. and Gul, M. and Ahmed, Waqar and Ahmad, Mushtaq and Munir, Mamoona and Yaqoob, Haseeb and Samuel, Olusegun D. and Razzaq, Luqman (2021) Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60 (5). pp. 4537-4546. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.03.017.

Mazaheri, Hoora and Ong, Hwai Chyuan and Amini, Zeynab and Masjuki, Haji Hassan and Mofijur, M. and Su, Chia Hung and Anjum Badruddin, Irfan and Khan, T. M. Yunus (2021) An overview of biodiesel production via calcium oxide based catalysts: Current state and perspective. Energies, 14 (13). ISSN 1996-1073, DOI https://doi.org/10.3390/en14133950.

Shahabuddin, M. and Mofijur, M. and Shuvho, Md. Bengir Ahmed and Chowdhury, M. A. K. and Kalam, M. A. and Masjuki, Haji Hassan and Chowdhury, M. A. (2021) A study on the corrosion characteristics of internal combustion engine materials in second-generation jatropha curcas biodiesel. Energies, 14 (14). ISSN 1996-1073, DOI https://doi.org/10.3390/en14144352.

Kumar, L. Harish and Kazi Md., Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (SI). ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2021.116916.

Gul, M. and Masjuki, Haji Hassan and Kalam, M. A. and Zulkifli, N. W. M. and Mujtaba, M. A. (2020) A review: Role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13 (1). pp. 1-22. ISSN 1939-1234, DOI https://doi.org/10.1007/s12155-019-10040-7.

Silitonga, Arridina Susan and Shamsuddin, Abd Halim and Mahlia, Teuku Meurah Indra and Milano, Jassinne and Kusumo, Fitranto and Siswantoro, Joko and Dharma, Surya and Sebayang, Abdi Hanra and Masjuki, Haji Hassan and Ong, Hwai Chyuan (2020) Biodiesel synthesis from Ceiba pentandra oil by microwave irradiation-assisted transesterification: ELM modeling and optimization. Renewable Energy, 146. pp. 1278-1291. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2019.07.065.

Zulfattah, Z.M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Norain, I. and Yusoff, Mohd Nur Ashraf Mohd and Jamshaid, Muhammad and Arslan, Ahmed (2020) Friction and Wear Performance of Oleate-Based Esters With Two-, Three-, and Four-Branched Molecular Structure in Pure Form and Mixture. Journal of Tribology, 143 (1). 011901. ISSN 0742-4787, DOI https://doi.org/10.1115/1.4047584.

Shahabuddin, M. and Mofijur, M. and Kalam, Md. Abul and Masjuki, Haji Hassan (2020) Study on the Friction and Wear Characteristics of Bio-lubricant Synthesized from Second Generation Jatropha Methyl Ester. Tribology in Industry, 42 (1). pp. 41-49. ISSN 0354-8996, DOI https://doi.org/10.24874/ti.2020.42.01.04.

Tan, M.Y. and Liza, Shahira and Khadijah, S.M.P. and Abbas, Azlina Amir and Merican, Azhar Mahmood and Ayob, Khairul Anwar and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan (2020) Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109. p. 104279. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2019.104279.

Syahir, A.Z. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Kalam, Md. Abul and Harith, M.H. and Yusoff, M.N.A.M. and Zulfattah, Z.M. and Jamshaid, Muhammad (2020) Tribological Improvement Using Ionic Liquids as Additives in Synthetic and Bio-Based Lubricants for Steel–Steel Contacts. Tribology Transactions, 63 (2). pp. 235-250. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2019.1679934.

Ong, Hwai Chyuan and Milano, Jassinnee and Silitonga, Arridina Susan and Masjuki, Haji Hassan and Shamsuddin, Abd Halim and Wang, Chin-Tsan and Indra Mahlia, Teuku Meurah and Siswantoro, Joko and Kusumo, Fitranto and Sutrisno, Joko (2019) Biodiesel production from Calophyllum inophyllum-Ceiba pentandra oil mixture: Optimization and characterization. Journal of Cleaner Production, 219. pp. 183-198. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2019.02.048.

Zulfattah, Z.M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Norain, I. and Jumaidin, Ridhwan and Yusoff, M.N.A.M. and Alwi, Azham and Jamshaid, Muhammad and Arslan, Ahmed (2019) Effect of bio-based lubricant towards emissions and engine breakdown due to spark plug fouling in a two-stroke engine. Journal of Cleaner Production, 221. pp. 215-223. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2019.02.224.

Teoh, Yew Heng and How, Heoy Geok and Masjuki, Haji Hassan and Nguyen, H.-T. and Kalam, Md. Abul and Alabdulkarem, Abdullah (2019) Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends. Renewable Energy, 136. pp. 521-534. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2018.12.110.

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Alwi, Azham and Khuong, Leang So and Alabdulkarem, Abdullah and Syahir, A.Z. (2019) Production optimization and tribological characteristics of cottonseed oil methyl ester. Journal of Cleaner Production, 209. pp. 62-73. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.10.126.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2019) Tribological Properties of Steel/Steel, Steel/DLC and DLC/DLC Contacts in the Presence of Biodegradable Oil. Journal of the Japan Petroleum Institute, 62 (1). pp. 11-18. ISSN 1346-8804, DOI https://doi.org/10.1627/jpi.62.11.

Yusoff, Mohd Nur Ashraf Mohd and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Khuong, L.S. and Zaharin, Muhammad Syarifuddin Mohamed and Alabdulkarem, Abdullah (2018) Comparative assessment of ethanol and isobutanol addition in gasoline on engine performance and exhaust emissions. Journal of Cleaner Production, 190. pp. 483-495. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.04.183.

Ahmmad, Md. Shahabuddin and Masjuki, Haji Hassan and Kalam, Md. Abul (2018) Comparative corrosion characteristics of automotive materials in Jatropha biodiesel. International Journal of Green Energy, 15 (6). pp. 393-399. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2018.1464925.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng and Chuah, Hun Guan (2018) Effect of Calophyllum Inophyllum biodiesel-diesel blends on combustion, performance, exhaust particulate matter and gaseous emissions in a multi-cylinder diesel engine. Fuel, 227. pp. 154-164. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2018.04.075.

Teoh, Yew Heng and Masjuki, Haji Hassan and How, Heoy Geok and Kalam, Md. Abul and Yu, Kok Hwa and Alabdulkarem, Abdullah (2018) Effect of two-stage injection dwell angle on engine combustion and performance characteristics of a common-rail diesel engine fueled with coconut oil methyl esters-diesel fuel blends. Fuel, 234. pp. 227-237. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2018.07.036.

Adnan, R. and Sabri Adlan, Z. and Munir, Fudhail Abdul and Mahlia, Teuku Meurah Indra and Masjuki, Haji Hassan (2018) Effects of equivalence ratio on performance and emissions of diesel engine with hydrogen and water injection system at variable injection timing. International Journal of Mechanical and Mechatronics Engineering, 18 (1). pp. 106-111. ISSN 2227-2771,

Silitonga, Arridina Susan and Masjuki, Haji Hassan and Ong, Hwai Chyuan and Sebayang, Abdi Hanra and Dharma, Surya and Kusumo, Fitranto and Siswantoro, Joko and Milano, Jassinnee and Daud, Khairil and Mahlia, Teuku Meurah Indra and Chen, Wei-Hsin and Sugiyanto, Bambang (2018) Evaluation of the engine performance and exhaust emissions of biodiesel-bioethanol-diesel blends using kernel-based extreme learning machine. Energy, 159. pp. 1075-1087. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2018.06.202.

Zaharin, Muhammad Syarifuddin Mohamed and Abdullah, Nik Rosli and Masjuki, Haji Hassan and Ali, Obed Majeed and Najafi, Gholamhassan and Yusaf, Talal (2018) Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine. Applied Thermal Engineering, 144. pp. 960-971. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2018.08.057.

Reddy, A.N.R. and Saleh, A.A. and Islam, Md Saiful and Hamdan, Sinin and Rahman, Md Rezaur and Masjuki, Haji Hassan (2018) Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10 (1). 013103. ISSN 1941-7012, DOI https://doi.org/10.1063/1.5018743.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng (2018) Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213. pp. 106-114. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2017.10.102.

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Chen, Wei-Hsin and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra (2018) Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology. Energy Conversion and Management, 158. pp. 400-415. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2017.12.027.

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra and Cheah, Mei Yee and Wang, Chin Tsan (2018) Physicochemical property enhancement of biodiesel synthesis from hybrid feedstocks of waste cooking vegetable oil and Beauty leaf oil through optimized alkaline-catalysed transesterification. Waste Management, 80. pp. 435-449. ISSN 0956-053X, DOI https://doi.org/10.1016/j.wasman.2018.09.005.

Mazaheri, Hoora and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Amini, Zeynab and Harrison, Mark D. and Wang, Chin Tsan and Kusumo, Fitranto and Alwi, Azham (2018) Rice bran oil based biodiesel production using calcium oxide catalyst derived from Chicoreus brunneus shell. Energy, 144. pp. 10-19. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2017.11.073.

Zahid, Rehan and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Mufti, Riaz Ahmad and Zulkifli, Nurin Wahidah Mohd and Gulzar, Mubashir and Bhutta, Muhammad Usman and Ali, Mian Ashfaq and Abdullah, Usman and Yunus, Robiah H. (2018) Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system. Industrial Lubrication and Tribology, 70 (5). pp. 888-901. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-06-2017-0156.

Zahid, Rehan and Mufti, Riaz Ahmad and Gulzar, Mubashir and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Yunus, Robiah (2018) Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C). Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 999-1013. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650117746803.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2018) Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil. International Journal of Surface Science and Engineering, 12 (1). pp. 60-75. ISSN 1749-785X, DOI https://doi.org/10.1504/IJSURFSE.2018.090055.

Arslan, Ahmed and Quazi, Moinuddin Mohammed and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Jamshaid, Muhammad and Mandalan, S.M. and Gohar, Ghulam Abbas and Gulzar, Mubashir and Alwi, Azham and Yarmand, Hooman and Mustafa, Maria S. (2018) Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express, 6 (3). 036414. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aaf74d.

Gulzar, Mubashir and Mahmood, Khalid and Zahid, Rehan and Alabdulkarem, Abdullah and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Ahmad, Pervaiz and Malik, Muhammad Sajjad Sabir (2018) The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 987-998. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650117749404.

Zahid, R. and Masjuki, Haji Hassan and Alabdulkarem, A. and Varman, Mahendra and Mufti, R.A. and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Gulzar, M. and Lee, T. (2017) Investigation of the tribochemical interactions of a tungsten-doped diamond-like carbon coating (W-DLC) with formulated palm trimethylolpropane ester (TMP) and polyalphaolefin (PAO). RSC Advances, 7 (43). pp. 26513-26531. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra27743h.

Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2017) Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties. Tribology Transactions, 60 (2). pp. 249-259. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2016.1158891.

Sebayang, A.H. and Masjuki, Haji Hassan and Ong, H.C. and Dharma, S. and Silitonga, A.S. and Kusumo, F. and Mahlia, T.M.I. and Bahar, A.H. (2017) Optimization of Reducing Sugar Production from Manihot glaziovii Starch Using Response Surface Methodology. Energies, 10 (1). p. 35. ISSN 1996-1073, DOI https://doi.org/10.3390/en10010035.

Yusoff, M.N.A.M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Kalam, Md. Abul and Mansor, M.F. and Azham, A. and Khuong, L.S. (2017) Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends. Transportation Research Part D: Transport and Environment, 57. pp. 23-38. ISSN 1361-9209, DOI https://doi.org/10.1016/j.trd.2017.09.004.

Sint, N.K.C. and Choudhury, I.A. and Masjuki, Haji Hassan and Aoyama, H. (2017) Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar. Solar Energy, 155. pp. 608-619. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2017.06.055.

Ali, O.M. and Mamat, R. and Masjuki, Haji Hassan and Abdullah, A.A. (2016) Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.11.035.

Arslan, A. and Masjuki, Haji Hassan and Varman, M. and Kalam, M.A. and Quazi, M.M. and Mosarof, M.H. (2016) Effect of change in temperature on the tribological performance of micro surface textured DLC coating. Journal of Materials Research, 31 (13). pp. 1837-1847. ISSN 0884-2914, DOI https://doi.org/10.1557/jmr.2016.12.

Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34 (6). pp. 549-564. ISSN 1002-0721, DOI https://doi.org/10.1016/S1002-0721(16)60061-3.

Ashraful, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Rashedul, H.K. and Habibullah, M. and Rashed, M.M. and Mosarof, M.H. and Arslan, A. (2016) Impact of edible and non-edible biodiesel fuel properties and engine operation condition on the performance and emission characteristics of unmodified DI diesel engine. Biofuels, 7 (3). pp. 219-232. ISSN 1759-7269, DOI https://doi.org/10.1080/17597269.2015.1132365.

Islam, M.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Habibullah, M. and Hossain, M.M. (2016) Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137. pp. 322-329. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.080.

Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41 (2). pp. 106-131. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2015.1076716.

Zulkifli, Nurin Wahidah Mohd and Azman, S.S.N. and Kalam, Md. Abul and Masjuki, Haji Hassan and Yunus, R. and Gulzar, M. (2016) Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International, 93. pp. 555-562. ISSN 0301-679X, DOI https://doi.org/10.1016/j.triboint.2015.03.024.

Abedin, M.J. and Kalam, M.A. and Masjuki, Haji Hassan and Sabri, M.F.M. and Rahman, S.M.A. and Sanjid, A. and Fattah, I.M.R. (2016) Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5. Renewable Energy, 88. pp. 20-29. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2015.11.027.

Sazzad, B.S. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2016) Retardation of oxidation and material degradation in biodiesel: a review. RSC Advances, 6 (65). pp. 60244-60263. ISSN 2046-2069, DOI https://doi.org/10.1039/C6RA10016C.

Azman, S.S.N. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Gulzar, M. and Zahid, R. (2016) Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. Journal of Materials Research, 31 (13). pp. 1932-1938. ISSN 0884-2914, DOI https://doi.org/10.1557/jmr.2016.24.

Islam, M.T. and Abdullah, A.B. and Shahir, S.A. and Kalam, M.A. and Masjuki, Haji Hassan and Shumon, R. and Rashid, M.H. (2016) A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137. pp. 728-740. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.111.

Iqbal, Md. Arbab and Varman, Mahendra and Masjuki, Haji Hassan and Kalam, M.A. and Hossain, Sajjad and Sayeed, Imtenan (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101. pp. 262-270. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.04.011.

Mofijur, M. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.02.020.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. and Sajjad, H. and Arbab, M.I. (2015) Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management, 94. pp. 84-94. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.047.

Wakil, M.A. and Kalam, Md. Abul and Masjuki, Haji Hassan and Atabani, A.E. and Fattah, I.M.R. (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94. pp. 51-67. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.043.

Al Mahmud, K.A.H. and Kalam, M.A. and Masjuki, Haji Hassan and Mobarak, H.M. and Zulkifli, N.W.M. (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40 (2). pp. 90-118. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2014.940441.

Palash, S.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Atabani, A.E. and Fattah, I.M.R. and Sanjid, Ahmed (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91. pp. 149-157. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.009.

Gulzar, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, M. and Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.055.

Atabani, A.E. and Badruddin, I.A. and Masjuki, Haji Hassan and Chong, W.T. and Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1452-5.

Arbab, M.I. and Varman, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Imtenan, S. and Sajjad, H. and Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.017.

Masum, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Palash, S.M. and Habibullah, M. (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86. pp. 230-237. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.08.032.

Sanjid, A. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Abedin, M.J. and Fattah, I.M.R. (2015) Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends. RSC Advances, 5 (17). pp. 13246-13255. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra14748k.

Teoh, Y.H. and Masjuki, Haji Hassan and Kalam, M.A. and How, H.G. (2015) Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine. RSC Advances, 5 (88). pp. 71608-71619. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra14624k.

Hossain, S. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, M.A. and Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. RSC Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra16239k.

Zahid, R. and Masjuki, Haji Hassan and Varman, Mahendra and Mufti, R.A. and Kalam, M.A. and Gulzar, M. (2015) Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review. Tribology Letters, 58 (2). p. 32. ISSN 1023-8883, DOI https://doi.org/10.1007/s11249-015-0506-5.

Rashedul, H.K. and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Y.H. and How, H.G. and Fattah, I.M.R. (2015) Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend. Energy Conversion and Management, 106. pp. 849-858. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.10.024.

Imtenan, S. and Rahman, S.M.A. and Masjuki, Haji Hassan and Varman, M. and Kalam, Md. Abul (2015) Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine. Renewable and Sustainable Energy Reviews, 52. pp. 1205-1211. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.166.

Teoh, Y.H. and Masjuki, Haji Hassan and Kalam, M.A. and How, H.G. (2015) Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel. RSC Advances, 5 (116). pp. 96080-96096. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra14831f.

Wan Ghazali, Wan Nor Maawa and Mamat, Rizalman and Masjuki, Haji Hassan and Najafi, Gholamhassan (2015) Effects of biodiesel from different feedstocks on engine performance and emissions: A review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.06.031.

Teoh, Y.H. and Masjuki, Haji Hassan and Noor, I.M. and Ali, B.S. and Kalam, M.A. and How, H.G. (2015) Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine. RSC Advances, 5 (53). pp. 42438-42447. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra04294a.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. RSC Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra15474f.

Habibullah, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, N.W.M. and Masum, B.M. and Arslan, A. and Gulzar, M. (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76. pp. 188-197. ISSN 0926-6690, DOI https://doi.org/10.1016/j.indcrop.2015.05.042.

Wakil, M.A. and Masjuki, Haji Hassan and Kalam, M.A. and Teoh, Y.H. and How, H.G. and Imtenan, S. (2015) Influence of engine operating variable on combustion to reduce exhaust emissions using various biodiesels blend. RSC Advances, 5 (122). pp. 100674-100681. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra16441a.

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan and Marlina, Anita (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. RSC Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra07100c.

Reham, S.S. and Masjuki, Haji Hassan and Kalam, Md. Abul and Shancita, I. and Fattah, I.M.R. and Ruhul, A.M. (2015) Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion. Renewable and Sustainable Energy Reviews, 52. pp. 1566-1579. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.08.013.

Ashrafur Rahman, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Sanjid, A. and Abedin, M.J. (2014) Assessing effect of idling on compression ignition engine operated with palm, jatropha and calophyllum biodiesel blends. Journal of the Institute of Industrial Applications Engineers, 2 (3). pp. 122-126. ISSN 2187-8811,

Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Khan, Mohammad Mahmudur Rahman and Arbab, M.I. and Imtenan, S. and Sanjid, A. (2014) Comparative study of biodiesel, GTL fuel and their blends in context of engine performance and exhaust emission. Procedia Engineering, 90. 466 - 471. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.758.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant. Tribology Transactions, 57 (3). pp. 408-415. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2013.878777.

Fattah, I.M.R. and Masjuki, Haji Hassan and Kalam, M.A. and Masum, B.M. (2014) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. Materials Research Innovations, 18 (S6). pp. 90-94. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000936.

Imtenan, S. and Masjuki, Haji Hassan and Varman, Mahendra and Arbab, M.I. and Sajjad, H. and Fattah, I.M.R. and Abedin, M.J. and Hasib, Abu Saeed Md. (2014) Emission and performance improvement analysis of biodiesel-diesel blends with additives. Procedia Engineering, 90. 472 - 477. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.759.

Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Md. Abul and Arbab, M.I. and Imtenan, S. and Ashrafur Rahman, S.M. (2014) Engine Combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews, 30. pp. 961-986. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2013.11.039.

Abedin, M.J. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Arbab, M.I. and Rizwanul Fattah, I.M. and Masum, B.M. (2014) Experimental investigation of a multicylinder unmodified diesel engine performance, emission, and heat loss characteristics using different biodiesel blends: Rollout of B10 in Malaysia. Scientific World Journal, 2014. p. 349858. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/349858.

Shafie, S.M.A. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2014) Life cycle assessment of rice straw-based power generation in Malaysia. Energy, 70. pp. 401-410. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2014.04.014.

Shafie, S.M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2014) Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment. Applied Energy, 135. pp. 299-308. ISSN 0306-2619, DOI https://doi.org/10.1016/j.apenergy.2014.08.101.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The effect of palm oil trimethylolpropane ester on extreme pressure lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228 (2). pp. 160-169. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650113500945.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Investigation of friction and wear characteristics of palm biodiesel. Energy Conversion and Management, 67. pp. 251-256. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2012.12.002.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Corrosion mechanism of copper in palm biodiesel. Corrosion Science, 67. pp. 50-59. ISSN 0010-938X, DOI https://doi.org/10.1016/j.corsci.2012.10.006.

Liza, S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Abbas, A.A. (2013) The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum–Lubricated Conditions. Tribology Transactions, 56 (1). pp. 130-140. ISSN 0569-8197, DOI https://doi.org/10.1080/10402004.2012.732199.

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Fattah, I.M.R. and Hazrat, M.A. and Varman, Mahendra and Mofijur, M. and Shahabuddin, M. (2013) Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. Procedia Engineering, 56. pp. 583-590. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2013.03.163.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Shahabuddin, M. and Yunus, Robiah (2013) Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy, 54. pp. 167-173. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2013.01.038.

Bushroa, Abdul Razak and Rahbari, R.G. and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat (2012) Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum, 86 (8). pp. 1107-1112. ISSN 0042-207X, DOI https://doi.org/10.1016/j.vacuum.2011.10.011.

Ahamed, Jamal Uddin and Madlool, N.A. and Saidur, Rahman and Shahinuddin, M.I. and Kamyar, A. and Masjuki, Haji Hassan (2012) Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46 (1). pp. 664-674. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2012.06.074.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Degradation of automotive materials in palm biodiesel. Energy, 40 (1). pp. 76-83. ISSN 0360-5442,

Haque, A. and Lim, B.H. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 115-123. ISSN 0957-4522,

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings, 50. pp. 347-354. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2012.04.001.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 597-610. ISSN 1308-772X,

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Sarkar, M.A.R. and Salam, B. and Masjuki, Haji Hassan and Kalam, M.A. and Saidur, Rahman and Sayem, A.S.M. (2012) Heat transfer and pressure drop characteristics in turbulent flow through a tube. Experimental Heat Transfer, 25 (4). pp. 301-322. ISSN 0891-6152, DOI https://doi.org/10.1080/08916152.2011.623819.

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Chowdhury, M.S.U. and Sarkar, M.A.R. and Salam, B. and Saidur, Rahman and Masjuki, Haji Hassan and Kalam, M.A. (2012) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. International Communications in Heat and Mass Transfer, 39 (1). pp. 94-101. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.09.007.

Saidur, Rahman and Rezaei, Mahdi and Muzammil, Wan Khairul and Masjuki, Haji Hassan and Paria, Saman and Hasanuzzaman, Md. (2012) Technologies to recover exhaust heat from internal combustion engines. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5649-5659. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.018.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53. pp. 117-126. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2012.06.013.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) An analysis of energy, exergy, and sustainable development of a vapor compression refrigeration system using hydrocarbon. International Journal of Green Energy, 9 (7). pp. 702-717. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.621491.

Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat and Beake, B.D. (2011) Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering. Surface and Coatings Technology, 206 (7). pp. 1837-1844. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2011.07.048.

Shafie, S.M. and Mahlia, Teuku Meurah Indra and Masjuki, Haji Hassan and Andriyana, Andri (2011) Current energy usage and sustainable energy in Malaysia: A review. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4370-4377. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.07.113.

Haseeb, A.S. Md. Abdul and Jun, T.S. and Fazal, M.A. and Masjuki, Haji Hassan (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36 (3). pp. 1814-1819.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92 (11). pp. 2154-2159. ISSN 0378-3820,

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 36 (5). pp. 3328-3334. ISSN 0360-5442,

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 401-418. ISSN 1308-772X,

Liza, S. and Haseeb, A.S. Md. Abdul and Abbas, A.A. and Masjuki, Haji Hassan (2011) Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis, 18 (6). pp. 1415-1423. ISSN 1350-6307,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844, DOI https://doi.org/10.1179/1743294410Y.0000000014.

Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, M.R. (2011) Parameter optimization of sputtered Ti interlayer using Taguchi method. International Journal of Mechanical and Materials Engineering, 6 (2). pp. 140-146. ISSN 1823-0334,

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Yanti, P.A.A. and Masjuki, Haji Hassan (2011) Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part A: Energy Science and Research, 27 (1). pp. 95-104. ISSN 1308-772X,

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Mekhilef, Saad and Ali, M.B. and Furqon, M.H. (2011) An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39 (12). pp. 7922-7929. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2011.09.045.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2011) A review on exergy analysis of vapor compression refrigeration system. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1593-1600. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.11.039.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334,

Mahlia, Teuku Meurah Indra and Hor, C.G. and Masjuki, Haji Hassan and Husnawan, M. and Varman, M. and Mekhilef, Saad (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025,

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.

Jahirul, M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jayed, M.H. and Wazed, M.A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.05.037.

Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Siang, C.T. and Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481,

Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Ann, L.J. and Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820,

Haseeb, A.S. Md. Abdul and Sia, S.Y. and Fazal, M.A. and Masjuki, Haji Hassan (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442,

Saidur, Rahman and Ahamed, Jamal Uddin and Masjuki, Haji Hassan (2010) Energy, exergy and economic analysis of industrial boilers. Energy Policy, 38 (5). pp. 2188-2197. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2009.11.087.

Ahamed, J.U. and Bhuiya, M.M.K. and Saidur, Rahman and Masjuki, Haji Hassan and Sarkar, M.A.R. and Sayem, A.S.M. and Islam, M. (2010) Forced convection heat transfer performance of porous twisted tape insert. Engineering e-Transaction, 5 (2). pp. 67-79. ISSN 1823-6379,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Abd Shukor, Mohd Hamdi (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2009.07.011.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025,

Aizura, A.B. and Mahlia, T.M.I. and Masjuki, Haji Hassan (2010) Potential fuel savings and emissions reduction from fuel economy standards implementation for motor-vehicles. Clean Technologies and Environmental Policy, 12 (3). pp. 255-263. ISSN 1618-954X,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334,

Haseeb, A.S. Md. Abdul and Hasan, M.M. and Masjuki, Haji Hassan (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface and Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2010.06.058.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2010) Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 5 (1). pp. 11-18. ISSN 1823-6379,

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Husnawan, M. and Masjuki, Haji Hassan and Kalam, M.A. (2010) An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part A: Energy Science and Research, 26 (1). pp. 1-11. ISSN 1308-772X,

Tajally, Mohammad and Huda, Zainul and Masjuki, Haji Hassan (2010) A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37 (4). pp. 425-432. ISSN 0734-743X,

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Memon, Liaquat Ali and Zulkifli, N.W.M. and Masjuki, Haji Hassan (2010) A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3092-3099. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.07.053.

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2009) Application of artificial neural network to predict brake specific fuel consumption of retrofitted cng engine. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 249-255. ISSN 1823-0334,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of annealing treatment on optical properties of anatase TiO 2 thin films. World Academy of Science, Engineering and Technology, 40. pp. 221-225. ISSN 2010-376X,

Hasanuzzaman, Md and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation. Energy, 34 (2). pp. 196-198. ISSN 1823-0334, DOI https://doi.org/10.1016/j.energy.2008.11.003.

Saidur, Rahman and Rahim, N.A. and Masjuki, Haji Hassan and Mekhilef, Saad and Hew, Wooi Ping and Jamaluddin, M.F. (2009) End-use energy analysis in the Malaysian industrial sector. Energy, 34 (2). pp. 153-158. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2008.11.004.

Saidur, Rahman and Rahim, N.A. and Ping, H.W. and Jahirul, M.I. and Mekhilef, Saad and Masjuki, Haji Hassan (2009) Energy and emission analysis for industrial motors in Malaysia. Energy Policy, 37 (9). pp. 3650-3658. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2009.04.033.

Jayed, M.H. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jahirul, M.I. (2009) Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable and Sustainable Energy Reviews, 13 (9). pp. 2452-2462. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.06.023.

Saidur, R. and Sattar, M.A. and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2009) Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy and Environment, 20 (4). pp. 533-551. ISSN 0958305X , DOI https://doi.org/10.1260/095830509788707266.

Saidur, Rahman and Hasanuzzaman, M. and Hasan, M.M. and Masjuki, Haji Hassan (2009) Overall thermal transfer value of residential buildings in Malaysia. Journal of Applied Sciences, 9 (11). pp. 2130-2136. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2130.2136.

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. (2009) Perfromance of an improved solar car ventilator. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 24-34. ISSN 1823-0334,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, Mohd Rafie (2009) Structural, optical and morphological properties of TiO2/Ag/TiO2 multilayer films. AIP Conference Proceedings, 1136 (1). pp. 229-233. ISSN 0094-243X,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.2815.2821.

Husnawan, M. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Mekhilef, Saad and Saifullah, M.G. (2009) Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends. Journal of Scientific and Industrial Research, 68 (12). pp. 1049-1052. ISSN 0022-4456,

Saidur, Rahman and Jahirul, M.I. and Hasanuzzaman, M. and Masjuki, Haji Hassan (2008) Analysis of exhaust emissions of natural gas engine by using response surface methodology. Journal of Applied Sciences, 8 (19). pp. 3328-3339. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.3328.3339.

Saidur, Rahman and Masjuki, Haji Hassan (2008) Application of artificial neural networks to investigate the energy performance of household refrigerator-freezers. Journal of Applied Sciences, 8 (11). pp. 2142-2149. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.2124.2129.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2008) Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 1. pp. 1-5. ISSN 2010-3867,

Saidur, Rahman and Masjuki, Haji Hassan (2008) Energy and associated emission analysis in office buildings. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 90-96. ISSN 1823-0334, DOI https://doi.org/10.1016/j.apenergy.2007.11.002.

Saidur, Rahman and Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2008) Energy-efficient optical coating for flat glass. Journal of Applied Sciences, 8 (10). pp. 1883-1890. ISSN 1812-5654,

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. Journal of Applied Sciences, 8 (10). pp. 1822-1831. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.1822.1831.

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Kai, G.S. (2008) Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. Journal of Applied Sciences, 8 (21). pp. 3957-3962. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.3957.3962.

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Mahlia, T.M.I. and Tan, C.Y. and Ooi, J.K. and Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334,

Abdesselam, H. and Masjuki, Haji Hassan and Saidur, Rahman and Sattar, M.A. and Guellal, M. (2008) Performance study of water-to-water heat pump using non-azeotropic refrigerant mixtures R407C. International Energy Journal, 9 (4).

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan and Ahmed, S. and Kalam, M.A. (2007) Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). International Journal of Mechanical and Materials Engineering. pp. 35-43.

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Butane, isobutane and their mixtures as an alterantives to R-134a in domestic refrigerator. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 154-160. ISSN 18230334 ,

Saidur, Rahman and Jahirul, M.I. and Moutushi, T.Z. and Imtiaz, H. and Masjuki, Haji Hassan (2007) Effect of partial substitution of diesel fuel by natural gas on performance parameters of a four-cylinder diesel engine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (1). pp. 1-10. ISSN 0957-6509, DOI https://doi.org/10.1243/09576509JPE182.

Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334,

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Ahmed, S. (2007) Energy and associated greenhouse gas emissions from household appliances in Malaysia. Energy Policy, 35 (3). pp. 1648-1657. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2006.05.006.

Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Amalina, M.A. and Faizul, M.S. and Saidur, Rahman (2007) Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building. Desalination, 209 (1-3). pp. 238-243. ISSN 0011-9164,

Saidur, Rahman and Sattar, M.A. and Hasanuzzaman, M. and Cheng, C.F. and Masjuki, Haji Hassan (2007) Open and closed door moisture transport and corresponding energy consumption in household refrigerator. Journal of Energy & Environment,, 6. pp. 18-27.

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Pure Butane as refrigerant in domestic refrigerator freezer. Greater Mekong Subregion Academic And Research Network, 2. pp. 29-34. ISSN 1905-9094,

Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saidur, Rahman and Faizul, M.S. and Niza Mohamad, E. (2007) Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering, 27 (8-9). pp. 1363-1370. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2006.10.024.

Saidur, Rahman and Hasanuzzaman, M. and Sattar, M.A. and Masjuki, Haji Hassan and Badruddin, I.A. and Mohiuddin, A.K.M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering, 2 (1). pp. 84-92. ISSN 1823-0334,

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2007) An application of energy and exergy analysis in residential sector of Malaysia. Energy Policy, 35 (2). pp. 1050-1063. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2006.02.006.

Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334 ,

Saidur, Rahman and Sattar, M.A. and Masjuki, Haji Hassan and Ahmed, S. and Hashim, U. (2007) An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia. Energy Policy, 35 (8). pp. 4018-4026. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2007.02.008.

Saidur, Rahman and Masjuki, Haji Hassan and Eow, K.F. and Jamaluddin, M.Y. (2006) Actual usage conditions and energy consumption of refrigerator-freezers. International Energy Journal, 7 (2). pp. 103-124. ISSN 1513-718X,

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Yap, F.C. (2006) Actual usage conditions, energy savings and associated emission reductions of washing machines. Transactions Hong Kong Institution of Engineers, 13 (2). pp. 16-23. ISSN 1023697X ,

Saidur, Rahman and Khaliq, A.H.A. and Masjuki, Haji Hassan (2006) Analysis of energy and exergy use for process heating in the industrial sector of Malaysia. International Journal of Exergy, 3 (2). pp. 119-149. ISSN 1742-8297, DOI https://doi.org/10.1504/ijex.2006.009041.

Saidur, Rahman and Sattar, M.A. and Izudin, A. and Masjuki, Haji Hassan (2006) Developing a comprehensive energy guide label for household appliances through consumers research survey. Journal of Energy & Environment,, 5. pp. 77-93.

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2006) A new approach to investigate the energy performance of a household refrigerator-freezer. International Energy Journal, 7 (1). pp. 13-23. ISSN 1513-718X,

Saidur, Rahman and Leong, W.B. and Masjuki, Haji Hassan and Jahirul, I. and Tamjis, M.R. (2005) Development and validation of emission model for a petrol engine using response surface methodology (RSM). Journal - The Institution of Engineers, Malaysia, 66 (4). pp. 44-51. ISSN 0126-513X,

Saidur, Rahman and Masjuki, Haji Hassan (2005) Different methods of grading or rating refrigerator freezers. Asian Journal on Energy & Environment, 6 (1). pp. 57-69. ISSN 1513-4121,

Mahlia, T.M.I. and Masjuki, Haji Hassan and Taha, F.M. and Rahim, N.A. and Saidur, Rahman (2005) Energy labeling for electric fans in Malaysia. Energy Policy, 33 (1). pp. 63-68. ISSN 0301-4215, DOI https://doi.org/10.1016/s0301-4215(03)00198-8.

Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, T.M.I. (2005) Labeling design effort for household refrigerator-freezers in Malaysia. Energy Policy, 33 (5). pp. 611-618. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2003.09.005.

Ahmed, Shamsuddin and Masjuki, Haji Hassan and Taha, Zahari (2005) TPM can go beyond maintenance: excerpt from a case implementation. Journal of Quality in Maintenance Engineering, 11 (1). pp. 19-42. ISSN 1355-2511, DOI https://doi.org/10.1108/13552510510589352.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia. Energy Policy, 32 (16). pp. 1819-1824. ISSN 03014215, DOI https://doi.org/10.1016/S0301-4215(03)00169-1.

Saidur, Rahman and Nasrudin, A.R. and Masjuki, Haji Hassan and Choudhury, I.A. and Mahlia, T.M.I. and Husnawan, M. (2004) Development of energy test procedure for household refrigerator-freezers in Malaysia. International Journal of Power and Energy Systems, 24 (1). pp. 46-55. ISSN 10783466,

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32 (16). pp. 1783-1787. ISSN 0301-4215, DOI https://doi.org/10.1016/s0301-4215(03)00170-8.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Viewpoint: Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32 (16). pp. 1783-1787. ISSN 0301-4215, DOI https://doi.org/10.1016/S0301-4215(03)00170-8.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and NoorLeha, A.R. (2003) Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia. Energy, 28 (7). pp. 751-754. ISSN 0360-5442, DOI https://doi.org/10.1016/s0360-5442(02)00190-1.

Saidur, Rahman and Nasrudin, A.R. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Tamjis, M.R. (2002) Developing energy efficiency standard and its impact on refrigerator-freezers in Malaysia. Journal Mekanikal UTM (14). pp. 63-77.

Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, T.M.I. and Nasrudin, A.R. (2002) Factors affecting refrigerator-freezers energy consumption. ASEAN Journal on Science and Technology for Development, 19 (2). pp. 57-68. ISSN 0217-5460,

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2002) Potential CO2 reduction by fuel substitution to generate electricity in Malaysia. Energy Conversion and Management, 43 (6). pp. 763-770. ISSN 0196-8904, DOI https://doi.org/10.1016/s0196-8904(01)00074-7.

Saidur, Rahman and Masjuki, Haji Hassan and Choudhury, I.A. (2002) Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption. Energy Conversion and Management, 43 (6). pp. 845-854. ISSN 0196-8904, DOI https://doi.org/10.1016/s0196-8904(01)00069-3.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, I.A. and Saidur, Rahman (2002) Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. International Journal of Power and Energy Systems, 22 (2). pp. 80-84. ISSN 1078-3466,

Mahlia, T.M. Indra and Masjuki, Haji Hassan and Choudhury, Imtiaz Ahmed and Saidur, Rahman (2001) Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia. Energy Conversion and Management, 42 (14). pp. 1673-1685. ISSN 0196-8904, DOI https://doi.org/10.1016/S0196-8904(00)00161-8.

Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, Imtiaz Ahmed and Mahlia, T.M. Indra and Ghani, A.K. and Maleque, M.A. (2001) The applicability of ISO household refrigerator–freezer energy test specifications in Malaysia. Energy, 26 (7). pp. 723-737. ISSN 0360-5442, DOI https://doi.org/10.1016/S0360-5442(01)00028-7.

Maleque, Md Abdul and Masjuki, Haji Hassan and Haseeb, A.S. Md. Abdul (2000) Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant. Wear, 239 (1). pp. 117-125. ISSN 0043-1648, DOI https://doi.org/10.1016/S0043-1648(00)00319-7.

Conference or Workshop Item

Varman, Mahendra and Ahmed, A. and Masjuki, Haji Hassan and Abul Kalam, M. and Zulkifli, Nurin Wahidah Mohd (2017) Evaluation of tribological performance of hydrogenated DLC by surface texturing in the presence of palm BASED TMP ester at different temperatures. In: 14th International Conference (AEIC) on Engineering, Architecture & Technology 2017, 12-14 December 2017, Cairo, Egypt.

Choi, C.M. and Varman, M. and Masjuki, Haji Hassan (2017) Investigation of Engine Emission with Diesel-Palm Biodiesel-Antioxidant Blend. In: 10th AUN/SEED-Net Regional Conference on Energy Engineering (RCEneE) 2017, 9-11 November 2017, Yangon, Myanmar.

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27-30 January 2016, IIT Bombay, Mumbai, India.

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27 - 30 January 2016, IIT Bombay, Mumbai, India.

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan (2015) Thermoelcctrical properties and surface morphology of iron(ii) complexes with conjugated mulltidonor ligands. In: Manchester Conference Centre, Manchester, United Kingdom, 13-16 September 2015, Manchester, United Kingdom.

Mohd Yusof, Noraini and Ong, Hwai Chyuan and Jan, Badrul Mohamed and Chong, Wen Tong and Masjuki, Haji Hassan (2015) Investigation of extraction and transesterification of algae by immobilized lipase as biofuel. In: 5th International Conference on Algal Biomass, Biofuels & Bioproducts, 7-10 June 2015, San Diego, USA. (Submitted)

Rizwanul Fattah, M. and Masjuki, Haji Hassan and Kalam, M.A. and Masum, B.M. (2013) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Varman, M. and Masjuki, Haji Hassan and Cheah, M.Y. and Cheng, Y.H. and Kalam, M.A. and Liaquat, A.M. and Shahabuddin, M. and Mofijur, M. (2012) Storage stability of biofuel. In: 2012 International Symposium on Energy Technology and Strategy, 22-24 November 2012, Tainan, Taiwan.

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, M. (2012) Impact of biodiesel on injector deposit formation. In: 5th Regional Conference on New and Renewable Energy (RCNRE 2012), 26-27 September 2012, Hanoi, Vietnam.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok.

Liaquat, A.M. and Kalam, M.A. and Masjuki, Haji Hassan and Jayed, M.H. (2011) Engine performance and emissions analysis using “Envo Diesel” and coconut biodiesel blended fuel as alternative fuels. In: 2nd International Conference on Environmental Science and Technology (ICEST 2011), 26-28 February 2011, Singapore.

Ahamed, J.U. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system. In: 2011 IEEE Conference on Clean Energy and Technology (CET), 27-29 June 2011, Kuala Lumpur.

Kalam, M.A. and Masjuki, Haji Hassan and Liaquat, A.M. and Jayed, M.H. and Nurul, F.M. (2010) Experimental study on jatrophapalm diesel blends as alternative fuels. In: 3rd International Symposium on Energy from Biomass and Waste, 08-11 Nov 2010, Venice, Italy.

Haque, A. and Won, Y.S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Investigations on Zn-Al-Ge alloys as high temperature die attach material. In: Electronics System Integration Technologies Conference, 13-16 September 2010, Berlin, Germany.

Liaquat, A.M. and Kalam, M.A. and Masjuki, Haji Hassan and Rezza, A. (2010) Emission characteristics of using different alternative fuels with petroleum diesel in a compression ignition (ci) engine. In: International Conference on Applied Energy (ICAE 2010), 21-23 Apr 2010, Singapore.

Saidur, Rahman and Jahirul, M.I. and Rahim, N.A. and Masjuki, Haji Hassan and Mekhilef, Saad and Hew, W.P. and Zamaluddin, M.F. (2010) Energy audit and consumption study of Malaysian industrial sector. In: Conference on Industrial Applications of Energy Systems, 1-2 Apr 2008, Sohar, Oman.. (Unpublished)

Kalam, M.A. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Fuad, M.A. and Halim, K. and Ishak, A. and Khair, M. and Yusoff, A. and Shahrir, A. (2009) Experimental test of a new compressed natural gas engine with direct injection. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 15-17 June 2009, Florence, Italy.

Husnawan, H. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saifullah, M.G. and Kalam, M.A. (2009) The use of dihydroxy fatty acid and palm-based polyol as selected components of envo-diesel fuel blends to reduce c.i. engine gaseous emissions and carbon deposits. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 15-17 June 2009, Florence, Italy.

Saidur, R. and Husnawan, M. and Masjuki, Haji Hassan and Jahirul, M.I. and Mahlia, T.M.I. and Nasruddin, A.R. and Mekhilef, Saad and Ping, H.W. and Zamaluddin, M.F. (2009) Energy and electricity consumption analysis of Malaysian industrial sector. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Dubai, UAE. (Submitted)

Husnawan, M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra and Saidur, Rahman and Kalam, Md. Abul (2009) Performance and emissions characterization of diesel engine running with re-formulated palm oil methyl ester-diesel blended fuel. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE. (Submitted)

Masjuki, Haji Hassan and Kalam, Md. Abul and Ishak, A. and Khair, M. and Shahrir, A. and Yusof, A. (2009) Experimental test of a new dedicated natural gas engine. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Masjuki, Haji Hassan and Sattar, M.A. and Mahlia, Teuku Meurah Indra and Kalam, Md. Abul and Husnawan, M. and Saidur, Rahman (2009) Significance of journal paper publication and guideline in postgraduate study. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Saudi Arabia.

Mahlia, Teuku Meurah Indra and Husnawan, M. and Masjuki, Haji Hassan and Remuslara, L. and Saidur, Rahman (2008) Energy savings potential by substituting driving with walking and cycling for short distance. In: ASME 2008 International Mechanical Engineering Congress and Exposition, 31 October-6 November 2008, Boston, Massachusetts, USA.

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Performance investigation of domestic refrigerator using pure hydrocarbons and blends of hydrocarbons as refrigerants. In: Proceedings of World Academy of Science, Engineering and Technology, 2007.

Masjuki, Haji Hassan and Kalam, M.A. and Syazly, M. and Mahlia, T.M.I. and Rahman, A.H. and Redzuan, M. and Varman, M. and Saidur, Rahman and Yau, Y.H. (2006) Experimental evaluation of an unmodified diesel engine using biodiesel with fuel additive. In: 1st International Forum On Strategic Technology "e-Vehicle Technology", IFOST 2006, 2006, Ulsan.

Aslam, M.U. and Masjuki, Haji Hassan and Kalam, M.A. and Abdesselam, H. and Varman, M. and Mahlia, T.M.I. and Amalina, M.A. (2005) The performance of a spark-ignition engine fuelled with natural gas and gasoline. In: ATCi 2005, Conference on Automotive Technology, Dec 6-8, 2005, Putrajaya, Malaysia.

Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and Mahlia, T.M.I. (2000) Factors effecting energy consumption of household refrigerator-freezers. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2000) A literature review on energy efficiency standards and labels for household electrical appliances. In: 2000 TENCON Proceedings, 24-27 September 2000, Kuala Lumpur, Malaysia.

Other

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Experimental investigation on the performance of domestic refrigerator using isobutane and mixture of propane, butane and isobutene. AU Journal.

This list was generated on Fri Mar 29 23:10:42 2024 +08.