Items where Author is "Kalam, Md. Abul"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 43.

Article

Gul, Mustabshirha and Kalam, Md. Abul and Mohd Zulkifli, Nurin Wahidah and Hj. Hassan, Masjuki and Abbas, Md. Mujtaba and Yousuf, Sumra and Al-Dahiree, Omar Sabah and Gaffar Abbas, Md. Kamaleldin and Ahmed, Waqar and Imran, Shahab (2022) Enhancing AW/EP tribological characteristics of biolubricant synthesized from chemically modified cotton methyl-esters by using nanoparticle as additives. Industrial Lubrication and Tribology, 74 (4, SI). pp. 411-420. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-07-2021-0253.

Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Mujtaba, M.A. and Zulkifli, Muhammad Syahir Amzar and Kalam, Md. Abul and Mohd Yusoff, Mohd Nur Ashraf and Ahmad, Muhammad Hazwan and Wan Daud, Wan Mohd Ashri (2022) Effect of plastic pyrolytic oil and waste cooking biodiesel on tribological properties of palm biodiesel-diesel fuel blends. Industrial Lubrication and Tribology. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-08-2021-0338.

Mujtaba, M. A. and Kalam, Md. Abul and Masjuki, H. H. and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar and Raju, V. Dhana and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2021.07.121.

Usman, Muhammad and Hussain, Haris and Riaz, Fahid and Irshad, Muneeb and Bashir, Rehmat and Haris Shah, Muhammad and Ahmad Zafar, Adeel and Bashir, Usman and Kalam, Md. Abul and Mujtaba, M. A. and M. Soudagar, Manzoore Elahi (2021) Artificial neural network led optimization of oxyhydrogen hybridized diesel operated engine. Sustainability, 13 (16). ISSN 2071-1050, DOI https://doi.org/10.3390/su13169373.

Ramasamy, Navin and Kalam, Md. Abul and Varman, Mahendra and Teoh, Yew Heng (2021) Comparative Studies of Piston Crown Coating with YSZ and Al2O3·SiO2 on Engine out Responses Using Conventional Diesel and Palm Oil Biodiesel. Coatings, 11 (8). p. 885. ISSN 2079-6412, DOI https://doi.org/10.3390/coatings11080885.

Ramasamy, Navin and Kalam, Md. Abul and Varman, Mahendra and Teoh, Yew Heng (2021) Effect of Thermal Barrier Coating on the Performance and Emissions of Diesel Engine Operated with Conventional Diesel and Palm Oil Biodiesel. Coatings, 11 (6). p. 692. ISSN 2079-6412, DOI https://doi.org/10.3390/coatings11060692.

Razzaq, Luqman and Farooq, Muhammad and Mujtaba, M.A. and Sher, Farooq and Farhan, Muhammad and Hassan, Muhammad Tahir and Soudagar, Manzoore Elahi M. and Atabani, A.E. and Kalam, Md. Abul and Imran, Muhammad (2020) Modeling Viscosity and Density of Ethanol-Diesel-Biodiesel Ternary Blends for Sustainable Environment. Sustainability, 12 (12). p. 5186. ISSN 2071-1050, DOI https://doi.org/10.3390/su12125186.

Shahabuddin, M. and Mofijur, M. and Kalam, Md. Abul and Masjuki, Haji Hassan (2020) Study on the Friction and Wear Characteristics of Bio-lubricant Synthesized from Second Generation Jatropha Methyl Ester. Tribology in Industry, 42 (1). pp. 41-49. ISSN 0354-8996, DOI https://doi.org/10.24874/ti.2020.42.01.04.

Soudagar, Manzoore Elahi M. and Kalam, Md. Abul and Sajid, Muhammad Usman and Afzal, Asif and Banapurmath, Nagaraj R. and Akram, Naveed and Mane, Suresh D. and Saleel C., Ahamed (2020) Thermal analyses of minichannels and use of mathematical and numerical models. Numerical Heat Transfer, Part A: Applications, 77 (5). pp. 497-537. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2019.1701883.

Syahir, A.Z. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Kalam, Md. Abul and Harith, M.H. and Yusoff, M.N.A.M. and Zulfattah, Z.M. and Jamshaid, Muhammad (2020) Tribological Improvement Using Ionic Liquids as Additives in Synthetic and Bio-Based Lubricants for Steel–Steel Contacts. Tribology Transactions, 63 (2). pp. 235-250. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2019.1679934.

Soudagar, Manzoore Elahi M. and Ghazali, Nik Nazri Nik and Kalam, Md. Abul and Badruddin, Irfan Anjum and Banapurmath, Nagaraj R. and Ali, Mohamad Azlin and Kamangar, Sarfaraz and Cho, Haeng Muk and Akram, Naveed (2020) An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics. Renewable Energy, 146. pp. 2291-2307. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2019.08.025.

Teoh, Yew Heng and How, Heoy Geok and Masjuki, Haji Hassan and Nguyen, H.-T. and Kalam, Md. Abul and Alabdulkarem, Abdullah (2019) Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends. Renewable Energy, 136. pp. 521-534. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2018.12.110.

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Alwi, Azham and Khuong, Leang So and Alabdulkarem, Abdullah and Syahir, A.Z. (2019) Production optimization and tribological characteristics of cottonseed oil methyl ester. Journal of Cleaner Production, 209. pp. 62-73. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.10.126.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2019) Tribological Properties of Steel/Steel, Steel/DLC and DLC/DLC Contacts in the Presence of Biodegradable Oil. Journal of the Japan Petroleum Institute, 62 (1). pp. 11-18. ISSN 1346-8804, DOI https://doi.org/10.1627/jpi.62.11.

Soudagar, Manzoore Elahi M. and Nik-Ghazali, Nik Nazri and Kalam, Md. Abul and Badruddin, Irfan Anjum and Banapurmath, N.R. and Yunus Khan, T.M. and Bashir, Muhammad Nasir and Akram, Naveed and Farade, Rijavan and Afzal, Asif (2019) The effects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics. Fuel, 257. p. 116015. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2019.116015.

Ahmmad, Md. Shahabuddin and Masjuki, Haji Hassan and Kalam, Md. Abul (2018) Comparative corrosion characteristics of automotive materials in Jatropha biodiesel. International Journal of Green Energy, 15 (6). pp. 393-399. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2018.1464925.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng and Chuah, Hun Guan (2018) Effect of Calophyllum Inophyllum biodiesel-diesel blends on combustion, performance, exhaust particulate matter and gaseous emissions in a multi-cylinder diesel engine. Fuel, 227. pp. 154-164. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2018.04.075.

Teoh, Yew Heng and Masjuki, Haji Hassan and How, Heoy Geok and Kalam, Md. Abul and Yu, Kok Hwa and Alabdulkarem, Abdullah (2018) Effect of two-stage injection dwell angle on engine combustion and performance characteristics of a common-rail diesel engine fueled with coconut oil methyl esters-diesel fuel blends. Fuel, 234. pp. 227-237. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2018.07.036.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng (2018) Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213. pp. 106-114. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2017.10.102.

Zahid, Rehan and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Mufti, Riaz Ahmad and Zulkifli, Nurin Wahidah Mohd and Gulzar, Mubashir and Bhutta, Muhammad Usman and Ali, Mian Ashfaq and Abdullah, Usman and Yunus, Robiah H. (2018) Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system. Industrial Lubrication and Tribology, 70 (5). pp. 888-901. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-06-2017-0156.

Zahid, Rehan and Mufti, Riaz Ahmad and Gulzar, Mubashir and Masjuki, Haji Hassan and Alabdulkarem, Abdullah and Varman, Mahendra and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Yunus, Robiah (2018) Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C). Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 999-1013. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650117746803.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2018) Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil. International Journal of Surface Science and Engineering, 12 (1). pp. 60-75. ISSN 1749-785X, DOI https://doi.org/10.1504/IJSURFSE.2018.090055.

Arslan, Ahmed and Quazi, Moinuddin Mohammed and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Jamshaid, Muhammad and Mandalan, S.M. and Gohar, Ghulam Abbas and Gulzar, Mubashir and Alwi, Azham and Yarmand, Hooman and Mustafa, Maria S. (2018) Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express, 6 (3). 036414. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aaf74d.

Gulzar, Mubashir and Mahmood, Khalid and Zahid, Rehan and Alabdulkarem, Abdullah and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Ahmad, Pervaiz and Malik, Muhammad Sajjad Sabir (2018) The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 987-998. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650117749404.

Zahid, R. and Masjuki, Haji Hassan and Alabdulkarem, A. and Varman, Mahendra and Mufti, R.A. and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Gulzar, M. and Lee, T. (2017) Investigation of the tribochemical interactions of a tungsten-doped diamond-like carbon coating (W-DLC) with formulated palm trimethylolpropane ester (TMP) and polyalphaolefin (PAO). RSC Advances, 7 (43). pp. 26513-26531. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra27743h.

Yusoff, M.N.A.M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Harith, M.H. and Syahir, A.Z. and Kalam, Md. Abul and Mansor, M.F. and Azham, A. and Khuong, L.S. (2017) Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends. Transportation Research Part D: Transport and Environment, 57. pp. 23-38. ISSN 1361-9209, DOI https://doi.org/10.1016/j.trd.2017.09.004.

Islam, M.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Habibullah, M. and Hossain, M.M. (2016) Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137. pp. 322-329. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.080.

Zulkifli, Nurin Wahidah Mohd and Azman, S.S.N. and Kalam, Md. Abul and Masjuki, Haji Hassan and Yunus, R. and Gulzar, M. (2016) Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International, 93. pp. 555-562. ISSN 0301-679X, DOI https://doi.org/10.1016/j.triboint.2015.03.024.

Wakil, M.A. and Kalam, Md. Abul and Masjuki, Haji Hassan and Atabani, A.E. and Fattah, I.M.R. (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94. pp. 51-67. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.043.

Palash, S.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Atabani, A.E. and Fattah, I.M.R. and Sanjid, Ahmed (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91. pp. 149-157. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.009.

Gulzar, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, M. and Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.055.

Arbab, M.I. and Varman, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Imtenan, S. and Sajjad, H. and Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.017.

Rashedul, H.K. and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Y.H. and How, H.G. and Fattah, I.M.R. (2015) Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend. Energy Conversion and Management, 106. pp. 849-858. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.10.024.

Imtenan, S. and Rahman, S.M.A. and Masjuki, Haji Hassan and Varman, M. and Kalam, Md. Abul (2015) Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine. Renewable and Sustainable Energy Reviews, 52. pp. 1205-1211. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.166.

Habibullah, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, N.W.M. and Masum, B.M. and Arslan, A. and Gulzar, M. (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76. pp. 188-197. ISSN 0926-6690, DOI https://doi.org/10.1016/j.indcrop.2015.05.042.

Reham, S.S. and Masjuki, Haji Hassan and Kalam, Md. Abul and Shancita, I. and Fattah, I.M.R. and Ruhul, A.M. (2015) Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion. Renewable and Sustainable Energy Reviews, 52. pp. 1566-1579. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.08.013.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant. Tribology Transactions, 57 (3). pp. 408-415. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2013.878777.

Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Md. Abul and Arbab, M.I. and Imtenan, S. and Ashrafur Rahman, S.M. (2014) Engine Combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews, 30. pp. 961-986. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2013.11.039.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The effect of palm oil trimethylolpropane ester on extreme pressure lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228 (2). pp. 160-169. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650113500945.

Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Shahabuddin, M. and Yunus, Robiah (2013) Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy, 54. pp. 167-173. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2013.01.038.

Conference or Workshop Item

Husnawan, M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra and Saidur, Rahman and Kalam, Md. Abul (2009) Performance and emissions characterization of diesel engine running with re-formulated palm oil methyl ester-diesel blended fuel. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE. (Submitted)

Masjuki, Haji Hassan and Kalam, Md. Abul and Ishak, A. and Khair, M. and Shahrir, A. and Yusof, A. (2009) Experimental test of a new dedicated natural gas engine. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Masjuki, Haji Hassan and Sattar, M.A. and Mahlia, Teuku Meurah Indra and Kalam, Md. Abul and Husnawan, M. and Saidur, Rahman (2009) Significance of journal paper publication and guideline in postgraduate study. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Saudi Arabia.

This list was generated on Fri Mar 29 07:39:27 2024 +08.