Items where Author is "Hamdi, M."

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 71.

Article

Krishnamurithy, G.; Murali, M.R.; Hamdi, M.; Abbas, A.A.; Raghavendran, H.B.; Kamarul, T. (2014) Characterization of bovine-derived porous hydroxyapatite scaffold and its potential to support osteogenic differentiation of human bone marrow derived mesenchymal stem cells. Ceramics International, 40 (1). pp. 771-777. ISSN 0272-8842

Sadollah, A.; Bahreininejad, A.; Hamdi, M.; Purbolaksono, J. (2014) Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms. Neural Computing & Applications. pp. 1-8. ISSN 0941-0643

Fessi, B.A.; Benabdallah, S.; Boudriga, N.; Hamdi, M. (2014) A multi-attribute decision model for intrusion response system. Information Sciences, 270. pp. 237-254. ISSN 00200255

Mahmoodian, R.; Rahbari, R.G.; Hamdi, M.; Hassan, M.A; Sparham, M. (2013) The Effects of an unexpected ceramic coating phase at the head of a pipe on joining and postprocessing of a ceramic-lined composite pipe. JOM Journal of the Minerals, Metals and Materials Society, 65 (1). pp. 80-85. ISSN 1047-4838

Mahdi, E.M.; Hamdi, M.; Yusoff, M.S.; Wilfred, P. (2013) Characterization of titania nanoparticles synthesized by the hydrothermal method with low grade mineral precursors. Journal of Nano Research, 21. pp. 71-76. ISSN 0000021210

Zalnezhad, E.; Sarhan, A.A.D.; Hamdi, M. (2013) Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application. The International Journal of Advanced Manufacturing Technology. pp. 1-12.

Zalnezhad, E.; Sarhan, A.A.D.; Hamdi, M. (2013) Optimizing the PVD TiN thin film coating as parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 281-290. ISSN 0268-3768

Zalnezhad, E.; Sarhan, A.A.D.; Hamdi, M. (2013) Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing, 14 (3). pp. 467-473. ISSN 2234-7593

Baradaran, S.; Basirun, W.J.; Mahmoudian, M.R.; Hamdi, M.; Alias, Y. (2013) Synthesis and characterization of monetite prepared using a sonochemical method in a mixed solvent system of water/ethylene glycol/N, N-Dimethylformamide. Metallurgical and Materials Transactions A, 1. p. 15. ISSN 1073-5623

Baradaran, S.; Alias, Y.; Hamdi, M.; Mahmoudian, M.R.; Basirun, W.J. (2013) Synthesis and characterization of monetite prepared using a sonochemical method in a mixed solvent system ofWater/Ethylene Glycol/N, N-Dimethylformamide. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1-8. ISSN 10735623

Mahdi, E.M.; Hamdi, M.; Yusoff, M.; Wilfred, P. (2013) XRD and EDXRF analysis of anatase Nano-TiO2 synthesized from mineral Precursors. Advanced Materials Research, 620. pp. 179-185. ISSN 3037855606

Zalnezhad, E.; Sarhan, A.A.D.; Hamdi, M. (2013) A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-9. ISSN 0268-3768

Mahmoodian, R.; Rahbari, R.G.; Hamdi, M.; Sparham, M. (2012) Another attempt to adopt a machine for SHS lining ceramics inside pipes. High Temperature Material Processes. ISSN 1093-3611 (In Press)

Hassan, M.A.; Hamdi, M.; Naderi, S.; Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824

Ghani, A.R.A.; Hassan, M.A.; Taha, Z.; Hamdi, M. (2012) Effect of slot geometry on the impact response of square column. Advanced Science Letters, 13 (1). pp. 1-7. ISSN 1936-6612

Sayuti, M.; Sarhan, A.A.D.; Fadzil, M.; Hamdi, M. (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool Taguchi approach. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768

Sayuti, M.; Sarhan, A.A.D.; Fadzil, M.; Hamdi, M. (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768

Zalnezhad, E.; Sarhan, A.A.D.; Hamdi, M. (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093

Ramesh, S.; Purbolaksono, J.; Hamdi, M.; Sopyan, I.; Tolouei, R.; Amiriyan, M.; Tarlochan, F.; Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468

Adzila, S.; Sopyan, I.; Hamdi, M. (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110. pp. 3639-3644. ISSN 3037852623

Zalnezhad, E.; Sarhan, A.A.D.M.; Hamdi, M. (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557

Endut, Z.; Hamdi, M.; Basirun, W.J. (2012) Pseudocapacitive performance of vertical copper oxide nanoflakes. Thin Solid Films. ISSN 0040-6090

Endut, Z.; Basirun, W.J.; Hamdi, M. (2012) Pseudocapacitive performance of vertical copper oxide nanoflakes. Thin Solid Films, 528. pp. 213-216. ISSN 00406090

Sarhan, A.A.D.; Sayuti, M.; Hamdi, M. (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768

Babaei, A.; Faraji, G.; Mashhadi, M.M.; Hamdi, M. (2012) Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method. Materials Science and Engineering: A, 558. pp. 150-157. ISSN 0921-5093

Ramesh, S.; Aw, K.L.; Tolouei, R.; Amiriyan, M.; Tan, C.Y.; Hamdi, M.; Purbolaksonoa, J.; Hassana, M.A.; Tengd, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842

Endut, Z.; Hamdi, M.; Basirun, W.J. (2012) Supercapacitance of bamboo-type anodic titania nanotube arrays. Surface and Coatings Technology. ISSN 0257-8972

Sarhan, A.A.D.; Zalnezhad, E.; Hamdi, M. (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093

Hassan, M.A.; Hamdi, M.; Noma, A. (2012) The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a guinea pig heart. Journal of the Mechanical Behavior of Biomedical Materials, 5 (1). pp. 99-109. ISSN 1751-6161

Faraji, G.; Abrinia, K.; Mashhadi, M.M.; Hamdi, M. (2012) An upper-bound analysis for frictionless TCAP process. Archive of Applied Mechanics. pp. 1-11. ISSN 0939-1533

Abu Kasim, N.H.; Madfa, A.A.; Hamdi, M.; Rahbari, G.R. (2011) 3D-FE analysis of functionally graded structured dental posts. Dental Materials Journal, 30 (6). pp. 869-880. ISSN 0287-4547

Prihandana, Gunawan Setia; Mahardika, Muslim; Hamdi, M.; Wong, Y.S.; Mitsui, Kimiyuki (2011) Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes. The International Journal of Advanced Manufacturing Technology, 56 (1-4). pp. 143-149. ISSN 0268-3768

Ramesh, S.; Amiriyan, M.; Meenaloshini, S.; Tolouei, R.; Hamdi, M.; Pruboloksono, J.; Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842

Ramesh, S.; Amiriyan, M.; Meenaloshini, S.; Tolouei, R.; Hamdi, M.; Pruboloksono, J.; Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842

Sayuti, M.; Sarhan, M.; Diaa, A.A.; Hamdi, M. (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154. pp. 721-726. ISSN 0878492046

Rahbari, RG; Abu Kasim, N.H.; Madfa, AA; Hamdi, M.; Bayat, M. (2011) Porosity reduction model in titanium - hydroxyapatite FGM composites using shrinkage measurement. Materials Research Innovations, 15 (Sup 2). s110-s113. ISSN 1432-8917

Rahbari, R.G.; Abu Kasim, N.H.; Madfa, A.A.; Hamdi, M.; Bayat, M. (2011) Porosity reduction model in titanium hydroxyapatite FGM composites using shrinkage measurement. Materials Research Innovations, 15 (Supple). s110-s113. ISSN 1432-8917

Rashid, A.Z.; Purbolaksono, J.; Ramesh, S.; Hamdi, M.; Ahmad, A.; Tarlochan, F. (2011) Role of physical and mechanical properties of stainless steels in expected thermal fatigue life of plenum barrier plate of a gas turbine frame. Engineering Failure Analysis, 18 (8). pp. 2336-2342.

Ramesh, S.; Tolouei, R.; Hamdi, M.; Purbolaksono, J.; Y. Tan, C.; Amiriyan, M.; D. Teng, W. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849.

Ramesh, S.; Tolouei, R.; Hamdi, M.; Purbolaksono, J.; Y. Tan, C.; Amiriyan, M.; D. Teng, W. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137

Hasan, M. M.; Haseeb, A. S. M. A.; Saidur, R.; Masjuki, H. H.; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO 2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, MM; Haseeb, ASMA; Saidur, R; Masjuki, HH; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M.M.; Haseeb, A.S.M.A.; Saidur, R.; Masjuki, H.H.; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, MM; Haseeb, A.; Saidur, R.; Masjuki, HH; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO< sub> 2</sub> thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M.M.; Haseeb, A.S.M.A.; Masjuki, H.H.; Saidur, R.; Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025

Hasan, M. M.; Haseeb, A.S.M.A.; Masjuki, H. H.; Saidur, R.; Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025

Sisamouth, L.; Hamdi, M.; Ariga, T. (2010) Investigation of gap filling ability of Ag-Cu-In brazing filler metals. Journal of alloys and compounds, 504 (2). pp. 325-329. ISSN 0925-8388

Madfa, A.; Abu Kasim, N.H.; Hamdi, M.; Rahbari, R.G.; Bayat, M. (2010) Thermo-mechanical stress in multilayered dental post due to temperature gradient. University of Malaya, Kuala Lumpur, Malaysia.

Madfa, A.A.; Abu Kasim, N.H.; Hamdi, M.; Rahbari G, R.; Latifi, M.H. (2009) A finite element study of the multilayered structured dental post. 2nd Meeting of IADR Pan Asian Pacific Federation (PAPF) and the 1st Meeting of IADR Asia/Pacific Region (APR).

Rahbari G, R.; Saw, L. H.; Hamdi, M.; Yahya, R. (2009) Combustion synthesis of TiO 2-Al-C/Al 2O 3 mixture in the presence of oxygen. Journal of Physics: Conference Series, 152 (1). 012055. ISSN 1742-6588

Saw, L. H.; Rahbari, G. R.; Hamdi, M.; Yahya, R. (2009) Correlations between reaction wave propagation and phase formations in combustion of diluted TiO 2-Al-C mixture. Materials Research Innovations, 13 (3). pp. 171-175. ISSN 1432-8917

Saw, L.H.; Rahbari, R.G.; Hamdi, M.; Yahya, R. (2009) Correlations between reaction wave propagation and phase formations in combustion of diluted TiO 2–Al–C mixture. Materials Research Innovations, 13 (3). pp. 171-175. ISSN 1432-8917

Prihandana, Gunawan Setia; Mahardika, M; Hamdi, M.; Mitsui, K (2009) Effect of m micro MoS2 powder mixed dielectric fluid on surface quality and material removal rate in micro EDM-processes. Transaction Material Research Society of Japan, 34 (2). pp. 329-332.

Toque, Jay Arre; Hamdi, M.; Ide-Ektessabi, A; Sopyan, Iis (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792

Thepsonthi, T; Hamdi, M.; Mitsui, K (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. International Journal of Machine Tools and Manufacture, 49 (2). pp. 156-162.

Hasan, M.M.; Haseeb, A.S.M.A.; Saidur, R.; Masjuki, H.H.; Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO 2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 18125654

Hasan, M.M.; Haseeb, A.S.M.A.; Saidur, R.; Masjuki, H.H.; Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 18125654

Dharma, I.G.B.; Hamdi, M.; Ariga, T. (2009) The effects of adding silver and indium to lead-free solders. Welding Journal, 88 (4). pp. 45-48. ISSN 0043-2296

Herliansyah, M.K.; Hamdi, M.; Ide-Ektessabi, A.; Wildan, M.W.; Toque, J.A. (2009) The influence of sintering temperature on the properties of compacted bovine hydroxyapatite. Materials Science & Engineering C-Biomimetic and Supramolecular Systems, 29 (5). pp. 1674-1680. ISSN 0928-4931

Tan, C.Y.; Ramesh, S.; Aw, K.L.; Yeo, W.H.; Hamdi, M.; Sopyan, I. (2008) Effect of powder calcination on the sintering of hydroxyapatite. Medical Journal of Malaysia, 63. pp. 87-88. ISSN 0300-5283

Mardziah, CM; Sopyan, I; Hamdi, M.; Ramesh, S (2008) Synthesis and characterization of strontium-doped hydroxyapatite powder via sol-gel method. The Medical journal of Malaysia, 63. pp. 79-80. ISSN 0300-5283

Sopyan, I.; Singh, R.; Hamdi, M. (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry Section a-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710

Ramesh, S.; Tan, C.Y.; Sopyan, I.; Hamdi, M.; Teng, W.D. (2007) Consolidation of nanocrystalline hydroxyapatite powder. Science and Technology of Advanced Materials, 8 (1-2). pp. 124-130.

Hamdi, M.; Ide-Ektessabi, A. (2007) Dissolution behavior of simultaneous vapor deposited calcium phosphate coatings in vitro. Materials Science and Engineering: C-Biomimetic and Supramolecular Systems, 27 (4). pp. 670-674. ISSN 0928-4931

Hamdi, M.; Ide-Ektessabi, A.; Toque, J.A. (2007) In vitro study of electron beam deposited calcium phosphate coating in simulated body fluid. Journal of materials research, 22 (03). pp. 621-626. ISSN 2044-5326

Abou-El-Hossein, K.A.; Kadirgama, K.; Hamdi, M.; Benyounis, K.Y. (2007) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Journal of Materials Processing Technology, 182 (1). pp. 241-247.

Ooi, C.Y.; Hamdi, M.; Ramesh, S. (2007) Properties of hydroxyapatite produced by annealing of bovine bone. Ceramics international, 33 (7). pp. 1171-1177. ISSN 0272-8842

Hamdi, M.; Ektessabi, Ari-Ide (2006) Calcium phosphate coatings: a comparative study between simultaneous vapor deposition and electron beam deposition techniques. Surface and Coatings Technology, 201 (6). pp. 3123-3128. ISSN 0257-8972

Hamdan, A.; Fadzil, M.; Abou-El-Hossein, K.A.; Hamdi, M. Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system. Journal of Aerospace Engineering.

Book

Adzila, S.; Sopyan, I.; Hamdi, M.; Ramesh, S. (2011) Mechanochemical synthesis of nanosized hydroxyapatite powder and its conversion to dense bodies. Materials Science Forum, 694 . Engineering, pp. 118-122.

Conference or Workshop Item

Sarhan, A.A.D.; Hassan, M.A.; Matsubara, A.; Hamdi, M. (2011) Compensation of machine tool spindle error motions in the radial direction for accurate monitoring of cutting forces utilizing sensitive displacement sensors. In: Proceedings of the World Congress on Engineering, 2011, London.

This list was generated on Mon Dec 22 17:13:33 2014 MYT.