 | Up a level |
Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. and Dawal, S.Z. (2017) An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. Applied Bionics and Biomechanics, 2017. pp. 1-14. ISSN 1176-2322, DOI https://doi.org/10.1155/2017/7595642.
Sint, N.K.C. and Choudhury, I.A. and Masjuki, Haji Hassan and Aoyama, H. (2017) Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar. Solar Energy, 155. pp. 608-619. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2017.06.055.
Abdullahi, A.A. and Choudhury, I.A. and Azuddin, M. (2016) Effect of runner dimensions on cavity filling in microinjection moulding for defect-free parts. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7788-7793. ISSN 1819-6608,
Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. (2016) An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors. Materials and Manufacturing Processes, 31 (7). pp. 896-904. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2015.1048358.
Hossain, I. and Choudhury, I.A. and Mamat, A. and Shahid, A. and Khan, A.N. and Hossain, A. (2016) Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique. Advances in Fuzzy Systems, 2016. pp. 1-9. ISSN 1687-7101, DOI https://doi.org/10.1155/2016/3632895.
Bhuiyan, M.S.H. and Choudhury, I.A. (2015) Investigation of tool wear and surface finish by analyzing vibration signals in turning assab-705 steel. Machining Science and Technology, 19 (2). pp. 236-261. ISSN 1091-0344, DOI https://doi.org/10.1080/10910344.2015.1018531.
Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-014-0635-1.
Tamrin, K.F. and Nukman, Y. and Choudhury, I.A. and Shirley, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166, DOI https://doi.org/10.1016/j.optlaseng.2014.11.001.
Hossain, A. and Choudhury, I.A. and Nahar, N. and Hossain, I. and Bin Mamat, A. (2015) Experimental and theoretical investigation of powder-binder mixing mechanism for metal injection molding. Materials and Manufacturing Processes, 30 (1). pp. 41-46. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2014.930955.
Azuddin, M. and Choudhury, I.A. and Taha, Z. (2015) Development and performance evaluation of a low-cost custom-made vertical injection molding machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1). pp. 79-86. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-014-0145-z.
Alam, M. and Choudhury, I.A. and Azuddin, M. (2014) Mechanism and Design Analysis of Articulated Ankle Foot Orthoses for Drop-Foot. Scientific World Journal, 2014. pp. 1-14. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/867869.
Choudhury, I.A. and Chuan, P.C. (2013) Experimental evaluation of laser cut quality of glass fibre reinforced plastic composite. Optics and Lasers in Engineering, 51. pp. 1125-1132. ISSN 0143-8166,
Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61 (5-8). pp. 465-479. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3722-7.
Choudhury, I.A. and Lawal, S.A. and Nukman, Y. (2012) Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768,
Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58. pp. 19-28. ISSN 0890-6955, DOI https://doi.org/10.1016/j.ijmachtools.2012.02.001.
Azuddin, M. and Zahari, T. and Choudhury, I.A. (2011) Observation of Polypropylene (PP) Melt Flow on Microchannel Using Polymethyl Methacrylate (PMMA) Mold. Materials and Manufacturing Processes, 26 (2). pp. 255-260. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2010.480996.
Saidur, Rahman and Nasrudin, A.R. and Masjuki, Haji Hassan and Choudhury, I.A. and Mahlia, T.M.I. and Husnawan, M. (2004) Development of energy test procedure for household refrigerator-freezers in Malaysia. International Journal of Power and Energy Systems, 24 (1). pp. 46-55. ISSN 10783466,
Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and NoorLeha, A.R. (2003) Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia. Energy, 28 (7). pp. 751-754. ISSN 0360-5442, DOI https://doi.org/10.1016/s0360-5442(02)00190-1.
Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2002) Potential CO2 reduction by fuel substitution to generate electricity in Malaysia. Energy Conversion and Management, 43 (6). pp. 763-770. ISSN 0196-8904, DOI https://doi.org/10.1016/s0196-8904(01)00074-7.
Saidur, Rahman and Masjuki, Haji Hassan and Choudhury, I.A. (2002) Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption. Energy Conversion and Management, 43 (6). pp. 845-854. ISSN 0196-8904, DOI https://doi.org/10.1016/s0196-8904(01)00069-3.
Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, I.A. and Saidur, Rahman (2002) Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. International Journal of Power and Energy Systems, 22 (2). pp. 80-84. ISSN 1078-3466,
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) CETE91 tool condition monitoring using ae signal in turning of ASSAB-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) Tool condition monitoring using ae signal in turning of assab-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak.
Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and Mahlia, T.M.I. (2000) Factors effecting energy consumption of household refrigerator-freezers. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.
Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2000) A literature review on energy efficiency standards and labels for household electrical appliances. In: 2000 TENCON Proceedings, 24-27 September 2000, Kuala Lumpur, Malaysia.
