 | Up a level |
Tuan Zaharinie, Tuan Zahari and Huda, Zainul and Ibrahim, Suriani and Yusof, Farazila and Abd Shukor, Mohd Hamdi and Rehan, Mohammad and Ariga, Tadashi (2022) Analysis of the reaction layer formed during Sapphire-Sapphire brazing using a Ag-Cu-Ti filler metal for gas-pressure sensors. ACS Applied Electronic Materials, 4 (5). pp. 2405-2412. ISSN 2637-6113, DOI https://doi.org/10.1021/acsaelm.2c00213.
Zakaria, Aqmar and Abd Shukor, Mohd Hamdi and Todoh, Masahiro and Jusoff, Kamaruzaman (2020) Bio-Functional Coating on Ti6Al4V Surface Produced by Using Plasma Electrolytic Oxidation. Metals, 10 (9). ISSN 2075-4701, DOI https://doi.org/10.3390/met10091124.
Annuar, N. Syahira M. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi (2020) Effect of focused ion beam process parameter on Tin-Nickel-Copper micropillars microfabrication. Materials and Manufacturing Processes, 35 (2). pp. 163-171. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2020.1711923.
Rizwan, Muhammad and Genasan, Krishnamurithy and Murali, Malliga Raman and Balaji Raghavendran, Hanumantha Rao and Alias, Rodianah and Cheok, Yi Ying and Wong, Won Fen and Mansor, Azura and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey and Kamarul, Tunku (2020) In vitro evaluation of novel low-pressure spark plasma sintered HA–BG composite scaffolds for bone tissue engineering. RSC Advances, 10 (40). pp. 23813-23828. ISSN 2046-2069, DOI https://doi.org/10.1039/d0ra04227g.
Alias, Rodianah and Mahmoodian, Reza and Genasan, Krishnamurithy and Vellasamy, Kumutha Malar and Abd Shukor, Mohd Hamdi and Kamarul, Tunku (2020) Mechanical, antibacterial, and biocompatibility mechanism of PVD grown silver–tantalum-oxide-based nanostructured thin film on stainless steel 316L for surgical applications. Materials Science and Engineering: C, 107. p. 110304. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2019.110304.
Hozoorbakhsh, Asghar and Abd Shukor, Mohd Hamdi and Sarhan, Ahmed Aly Diaa Mohammed and Ismail, Mohd Idris Shah and Tang, Chak Yin and Tsui, Gary Chi Pong (2019) CFD modelling of weld pool formation and solidification in a laser micro-welding process. International Communications in Heat and Mass Transfer, 101. pp. 58-69. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2019.01.001.
Dambatta, Yusuf S. and Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3959-3976. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-1689-3.
Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Tamin, Mohd Nasir and Abd Shukor, Mohd Hamdi (2018) Effects of Sample and Indenter Configurations of Nanoindentation Experiment on the Mechanical Behavior and Properties of Ductile Materials. Metals, 8 (6). p. 421. ISSN 2075-4701, DOI https://doi.org/10.3390/met8060421.
Ibrahim, Mahmoud Z. and Sarhan, Ahmed Aly Diaa Mohammed and Kuo, Tsung Yuan and Yusof, Farazila and Abd Shukor, Mohd Hamdi and Chien, Chi Sheng (2018) Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating. The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1977-1987. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-2354-6.
Rizwan, Muhammad and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey and Kondoh, Katsuyoshi and Umeda, Junko (2018) Low pressure spark plasma sintered hydroxyapatite and Bioglass® composite scaffolds for bone tissue repair. Ceramics International, 44 (18). pp. 23052-23062. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.09.108.
Akinwekomi, Akeem Damilola and Tang, Chak Yin and Tsui, Gary Chi Pong and Law, Wing Cheung and Chen, Ling and Yang, Xu Sheng and Abd Shukor, Mohd Hamdi (2018) Synthesis and characterisation of floatable magnesium alloy syntactic foams with hybridised cell morphology. Materials & Design, 160. pp. 591-600. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.10.004.
Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, Ahmed Aly Diaa Mohammed and Akbari, J. and Abd Shukor, Mohd Hamdi and Ong, Zhi Chao (2016) Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance. Concurrent Engineering, 24 (1). pp. 83-93. ISSN 1063-293X, DOI https://doi.org/10.1177/1063293X15597047.
Dabbagh, Ali and Abdullah, Basri Johan Jeet and Abu Kasim, Noor Hayaty and Abdullah, Hadijah and Abd Shukor, Mohd Hamdi (2015) A new mechanism of thermal sensitivity for rapid drug release and low systemic toxicity in hyperthermia and thermal ablation temperature ranges. International Journal of Hyperthermia, 31 (4). pp. 375-385. ISSN 0265-6736, DOI https://doi.org/10.3109/02656736.2015.1006268.
Tuan Zahari, Tuan Zaharinie and Huda, Z. and Izuan, M.F. and Abd Shukor, Mohd Hamdi (2015) Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper. Applied Surface Science, 331. pp. 127-131. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2015.01.078.
Ezazi, M.A. and Yusof, Farazila and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi and Fadzil, M. (2015) Employment of fiber laser technology to weld austenitic stainless steel 304 l with aluminum alloy 5083 using pre-placed activating flux. Materials & Design, 87. pp. 105-123. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.014.
Sadollah, A. and Bahreininejad, A. and Abd Shukor, Mohd Hamdi and Purbolaksono, J. (2014) Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms. Neural Computing and Applications. pp. 1-8. ISSN 0941-0643,
Niakan, A. and Ramesh, Singh and Abd Shukor, Mohd Hamdi and Jahanshahi, A. and Tan, C.Y. and Ching, Yern Chee and Tolouei, R. (2014) Thermal treatment and properties of bovine hydroxyapatite. Materials Research Innovations, 18 (S6). pp. 117-120. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000941.
Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Hassan, Mohamed Mohsen Abdel-Naeim and Sparham, M. (2013) The Effects of an unexpected ceramic coating phase at the head of a pipe on joining and postprocessing of a ceramic-lined composite pipe. JOM Journal of the Minerals, Metals and Materials Society, 65 (1). pp. 80-85. ISSN 1047-4838, DOI https://doi.org/10.1007/s11837-012-0498-7.
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Yusoff, M.S. and Wilfred, P. (2013) Characterization of titania nanoparticles synthesized by the hydrothermal method with low grade mineral precursors. Journal of Nano Research, 21. pp. 71-76. ISSN 0000021210,
Baradaran, Saied and Basirun, Wan Jefrey and Mahmoudian, Mohammad Reza and Abd Shukor, Mohd Hamdi and Alias, Yatimah (2013) Synthesis and characterization of monetite prepared using a sonochemical method in a mixed solvent system of Water/Ethylene Glycol/N, N-Dimethylformamide. Metallurgical and Materials Transactions A, 44 (5). pp. 2331-2338. ISSN 1073-5623, DOI https://doi.org/10.1007/s11661-012-1595-5.
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Yusoff, M. and Wilfred, P. (2013) XRD and EDXRF analysis of anatase Nano-TiO2 synthesized from mineral Precursors. Advanced Materials Research, 620. pp. 179-185. ISSN 3037855606,
Akhavan, A. and Abd Shukor, Mohd Hamdi and Jabbari, N. (2013) The evaluation of EOR methods for a heavy-oil reservoir with the AHP method: The case of ferdowsi reservoir. Petroleum Science and Technology, 31 (3). pp. 267-275. ISSN 1091-6466,
Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Sparham, M. (2012) Another attempt to adopt a machine for SHS lining ceramics inside pipes. High Temperature Material Processes. ISSN 1093-3611, DOI https://doi.org/10.1615/.2012004708. (In Press)
Sayuti, M. and Sarhan, A.A.D. and Tanaka, T. and Abd Shukor, Mohd Hamdi and Saito, Y. (2012) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. The International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768,
Yusof, Farazila and Yukio, Miyashita and Yoshiharu, Mutoh and Abd Shukor, Mohd Hamdi (2012) Effect of anodizing on pulsed Nd: YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052). Materials & Design, 37. pp. 410-415. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.01.006.
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Fadzil, M. and Abd Shukor, Mohd Hamdi (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3657-z.
Adzila, S. and Sopyan, I. and Abd Shukor, Mohd Hamdi (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110. pp. 3639-3644. ISSN 3037852623,
Sadollah, Ali and Bahreininejad, A. and Eskandar, Hadi and Abd Shukor, Mohd Hamdi (2012) Mine blast algorithm for optimization of truss structures with discrete variables. Computers & Structures, 102. pp. 49-63. ISSN 0045-7949,
Nik Pa, Nik Masmiati and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Optimizing the cutting parameters for better surface quality in 2.5 D cutting utilizing titanium coated carbide ball end mill. International Journal of Precision Engineering and Manufacturing, 13 (12). pp. 2097-2102. ISSN 2234-7593,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557,
Endut, Zulkarnain and Basirun, Wan Jefrey and Abd Shukor, Mohd Hamdi (2012) Pseudocapacitive performance of vertical copper oxide nanoflakes. Thin Solid Films, 528. pp. 213-216. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2012.09.084.
Sarhan, Ahmed Aly Diaa Mohammed and Sayuti, Mohd and Abd Shukor, Mohd Hamdi (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-012-3940-7.
Babaei, A. and Faraji, G. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method. Materials Science and Engineering: A, 558. pp. 150-157. ISSN 0921-5093,
Endut, Z. and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey (2012) Supercapacitance of bamboo-type anodic titania nanotube arrays. Surface and Coatings Technology. ISSN 0257-8972,
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Meor Yusoff, M.S. (2012) The effect of sintering on the physical and optical properties of Nano-TiO 2 synthesized via a modified hydrothermal route. Arabian Journal for Science and Engineering. pp. 1-11. ISSN 1319-8025,
Hamdan, Ahmad and Sarhan, Ahmed AD and Abd Shukor, Mohd Hamdi (2012) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology, 58 (1-4). pp. 81-91. ISSN 0268-3768,
Faraji, G. and Abrinia, K. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) An upper-bound analysis for frictionless TCAP process. Archive of Applied Mechanics. pp. 1-11. ISSN 0939-1533,
Prihandana, Gunawan Setia and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Wong, Y.S. and Mitsui, Kimiyuki (2011) Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes. The International Journal of Advanced Manufacturing Technology, 56 (1-4). pp. 143-149. ISSN 0268-3768,
Prihandana, Gunawan Setia and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Mitsui, Kimiyuki (2011) Effect of low-frequency vibration on workpiece in EDM processes. Journal of Mechanical Science and Technology, 25 (5). pp. 1231-1234. ISSN 1738-494X,
Ab Karim, Mohd Sayuti and Aly Diaa Mohammed Sarhan, Ahmed and Abd Shukor, Mohd Hamdi (2011) Experimental study on minimizing edge chipping in glass milling operation using an internal CBN grinding tool. Materials and Manufacturing Processes, 26 (8). pp. 969-976. ISSN 1042-6914,
Norhirni, M.Z. and Abd Shukor, Mohd Hamdi and Nurmaya Musa, S. and Saw, L.H. and Mardi, N.A. and Hilman, N. (2011) Load and stress analysis for the swash plate of an axial piston pump/motor. Journal of Dynamic Systems, Measurement, and Control, 133 (6). ISSN 0022-0434,
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.154-155.721.
Hamdan, A. and Fadzil, M. and Abou-El-Hossein, K.A. and Abd Shukor, Mohd Hamdi (2011) Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system. ASEAN Engineering Journal, 1 (1). pp. 1-9. ISSN 2229-127X,
Sopyan, I. and Nawawi, N.A. and Shah, Q.H. and Ramesh, S. and Tan, C.Y. and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26 (7). pp. 908-914. ISSN 1042-6914,
Prihandana, Gunawan Setia and Sriani, Tutik and Prihandana, Kei and Prihandana, Yuta and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Mitsui, Kimiyuki (2011) Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining. Advanced Materials Research, 264. pp. 1450-1455. ISSN 3037850531,
Ghafarirad, H. and Rezaei, S.M. and Zareinejad, M. and Abd Shukor, Mohd Hamdi (2011) A robust adaptive control for micro-positioning of piezoelectric actuators with environment force estimation. Transactions of the Institute of Measurement and Control. ISSN 0142-3312,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Abd Shukor, Mohd Hamdi (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2009.07.011.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,
Sisamouth, L. and Abd Shukor, Mohd Hamdi and Ariga, T. (2010) Investigation of gap filling ability of Ag-Cu-In brazing filler metals. Journal of Alloys and Compounds, 504 (2). pp. 325-329. ISSN 0925-8388,
Abd Shukor, Mohd Hamdi and Toque, J.A. and Ide-Ektessabi, A. (2010) Wear characteristics and adhesion behavior of calcium phosphate thin-films. Key Engineering Materials, 443. pp. 469-474. ISSN 0878492674,
Saw, L.H. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Yahya, Rosiyah (2009) Correlations between reaction wave propagation and phase formations in combustion of diluted TiO2–Al–C mixture. Materials Research Innovations, 13 (3). pp. 171-175. ISSN 1432-8917, DOI https://doi.org/10.1179/143307509X437536.
Prihandana, Gunawan Setia and Mahardika, M. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Effect of m micro MoS2 powder mixed dielectric fluid on surface quality and material removal rate in micro EDM-processes. Transaction Material Research Society of Japan, 34 (2). pp. 329-332.
Toque, Jay Arre and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Sopyan, Iis (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792,
Thepsonthi, T. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. International Journal of Machine Tools and Manufacture, 49 (2). pp. 156-162.
Dharma, I. and Budi, Gusti Bagus and Abd Shukor, Mohd Hamdi and Ariga, Tadashi (2009) Wettability of low silver content lead-free solder alloy. Materials transactions, 50 (5). pp. 1135-1138. ISSN 1347-5320,
Dharma, I.G.B. and Abd Shukor, Mohd Hamdi and Ariga, T. (2009) The effects of adding silver and indium to lead-free solders. Welding Journal, 88 (4). pp. 45-48. ISSN 0043-2296,
Herliansyah, M.K. and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Wildan, M.W. and Toque, J.A. (2009) The influence of sintering temperature on the properties of compacted bovine hydroxyapatite. Materials Science and Engineering: C, 29 (5). pp. 1674-1680. ISSN 0928-4931,
Tan, C.Y. and Ramesh, S. and Aw, K.L. and Yeo, W.H. and Abd Shukor, Mohd Hamdi and Sopyan, I. (2008) Effect of powder calcination on the sintering of hydroxyapatite. Medical Journal of Malaysia, 63. pp. 87-88. ISSN 0300-5283,
Mardziah, C.M. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Ramesh, S. (2008) Synthesis and characterization of strontium-doped hydroxyapatite powder via sol-gel method. Medical Journal of Malaysia, 63. pp. 79-80. ISSN 0300-5283,
Ramesh, S. and Tan, C.Y. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Teng, W.D. (2007) Consolidation of nanocrystalline hydroxyapatite powder. Science and Technology of Advanced Materials, 8 (1-2). pp. 124-130.
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. (2007) Dissolution behavior of simultaneous vapor deposited calcium phosphate coatings in vitro. Materials Science and Engineering: C, 27 (4). pp. 670-674. ISSN 0928-4931,
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Toque, J.A. (2007) In vitro study of electron beam deposited calcium phosphate coating in simulated body fluid. Journal of Materials Research, 22 (03). pp. 621-626. ISSN 0884-2914,
Abou-El-Hossein, K.A. and Kadirgama, K. and Abd Shukor, Mohd Hamdi and Benyounis, K.Y. (2007) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Journal of Materials Processing Technology, 182 (1). pp. 241-247.
Ooi, C.Y. and Abd Shukor, Mohd Hamdi and Ramesh, S. (2007) Properties of hydroxyapatite produced by annealing of bovine bone. Ceramics International, 33 (7). pp. 1171-1177. ISSN 0272-8842,
Abd Shukor, Mohd Hamdi and Ektessabi, Ari-Ide (2006) Calcium phosphate coatings: a comparative study between simultaneous vapor deposition and electron beam deposition techniques. Surface and Coatings Technology, 201 (6). pp. 3123-3128. ISSN 0257-8972,
Bushroa, Abdul Razak and Azmi, N.A. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi and Gupta, V. and Wasa, K. (2016) An Energy Star Physical Vapor Deposition (PVD) Machine. In: International Conference on Knowledge Transfer, 1-3 December 2015, Putrajaya, Malaysia.
Sarhan, Ahmed Aly Diaa Mohammed and Ooi, M.E. and Sayuti, M. and Abd Shukor, Mohd Hamdi (2014) Investigate the possibility of using carbon onion nanolubrication with DLC cutting tool to reduce the machining power consumption. In: Proceedings of the International Conference Advances in Mechanical & Automation Engineering, 07-08 June 2014, Rome, Italy.
Maisarah, L. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Fadzil, M. and Yusof, Farazila (2013) Characteristics of hybrid microwave sintering of Zn-AI-Cu-Mg alloy. In: 1st International Conference on the Science & Engineering Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur.
Mahmoodian, Reza and Rahbari, Reza and Abd Shukor, Mohd Hamdi (2011) Safety issues improvement in ceramic lined composite pipe produced using SHS method. In: 2011 International Conference on Industrial Engineering and Operations Management , January 22 – 24, 2011, Kuala Lumpur, Malaysia.
Sarhan, Ahmed Aly Diaa Mohammed and Hassan, M.A. and Matsubara, A. and Abd Shukor, Mohd Hamdi (2011) Compensation of machine tool spindle error motions in the radial direction for accurate monitoring of cutting forces utilizing sensitive displacement sensors. In: Proceedings of the World Congress on Engineering, 2011, London.
Ab Karim, Mohd Sayuti and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2013) Surface quality improvement in CNC end milling of aluminum alloy using nanolubrication system. Springer, pp. 669-683.
Syed Abu Bakar, Sharifah Adzila and Sopyan, I. and Abd Shukor, Mohd Hamdi and Ramesh, Singh (2011) Mechanochemical synthesis of nanosized hydroxyapatite powder and its conversion to dense bodies. Materials Science Forum, 694 . Engineering, pp. 118-122.
Abd Shukor, Mohd Hamdi (2014) Zecttron®. University of Malaya, UM Centre of Innovation and Commercialization . (Submitted)
