 | Up a level |
Liu, Jingjing and Naeem, Muhammad Awais and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Shasmin, Hanie Nadia and Arifin, Nooranida and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2023) Effect of infill parameters on the compressive strength of 3d-printed nylon-based material. Polymers, 15 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15020255.
Khairuddin, Mohamed Zul Fadhli and Hui, Puat Lu and Hasikin, Khairunnisa and Abd Razak, Nasrul Anuar and Lai, Khin Wee and Saudi, Ahmad Shakir Mohd and Ibrahim, Siti Salwa (2022) Occupational injury risk mitigation: Machine learning approach and feature optimization for smart workplace surveillance. International Journal of Environmental Research and Public Health, 19 (21). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph192113962.
Mazlan, Muhamad Farhan Mohd and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Abd Razak, Nasrul Anuar (2022) Design and development of automated dispensing machine as medical device-based application: A review. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 236 (18). pp. 10033-10050. ISSN 0954-4062, DOI https://doi.org/10.1177/09544062221099163.
Khairuddin, Mohamed Zul Fadhli and Hasikin, Khairunnisa and Abd Razak, Nasrul Anuar and Lai, Khin Wee and Osman, Mohd Zamri and Aslan, Muhammet Fatih and Sabanci, Kadir and Azizan, Muhammad Mokhzaini and Satapathy, Suresh Chandra and Wu, Xiang (2022) Predicting occupational injury causal factors using text-based analytics: A systematic review. Frontiers in Public Health, 10. ISSN 2296-2565, DOI https://doi.org/10.3389/fpubh.2022.984099.
Suhaimi, Nur Aina Syafiqah and Muhamad, Farina and Abd Razak, Nasrul Anuar and Zeimaran, Ehsan (2022) Recycling of polyethylene terephthalate wastes: A review of technologies, routes, and applications. Polymer Engineering and Science, 62 (8). pp. 2355-2375. ISSN 0032-3888, DOI https://doi.org/10.1002/pen.26017.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Stiffness estimation of planar spiral spring based on Gaussian process regression. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-15421-1.
Mohd Mazlan, Muhamad Farhan and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Mohd Amran, Nor Amirah and Abd Rashid, Rusdi and Abd Razak, Nasrul Anuar and Kadri, Nahrizul Adib and Zahari, Zalina (2022) Development and performance evaluation of automated methadone dispenser for drug addiction therapy. Journal of Testing and Evaluation, 50 (3, SI). pp. 1299-1312. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20210709.
Mazlan, Muhamad Farhan Mohd and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Amran, Nor Amirah Mohd and Abd Rashid, Rusdi and Abd Razak, Nasrul Anuar and Kadri, Nahrizul Adib and Zahari, Zalina (2022) Development and performance evaluation of automated methadone dispenser for drug addiction therapy. Journal of Testing and Evaluation, 50 (3, SI). pp. 1299-1312. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20210709.
Jamaludin, Mohd Redzuan and Lai, Khin Wee and Chuah, Joon Huang and Zaki, Muhammad Afiq and Hasikin, Khairunnisa and Abd Razak, Nasrul Anuar and Dhanalakshmi, Samiappan and Saw, Lim Beng and Wu, Xiang (2022) Machine learning application of transcranial motor-evoked potential to predict positive functional outcomes of patients. Computational Intelligence and Neuroscience, 2022. ISSN 1687-5265, DOI https://doi.org/10.1155/2022/2801663.
Hamzah, Nur Afiqah and Abd Razak, Nasrul Anuar and Ab Karim, Mohd Sayuti and Salleh, Siti Zuliana (2022) Validation of a roughness parameters for defining surface roughness of prosthetic polyethylene Pe-Lite liner. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-05173-3.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Optimization and comparison of typical elastic actuators in powered ankle-foot prosthesis. International Journal of Control Automation and Systems, 20 (1). pp. 232-242. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-020-0980-x.
Sobh, Khaled Nedal Mahmoud and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2022) A FSR sensor cuff to measure muscle activation during strength and gait cycle for lower limb. IEEE Access, 10. pp. 106135-106147. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2022.3207497.
Nizam, Mohamed Afifuddeen Bin Mohamed and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Biomechanical analysis of an improvement of prosthetic liner using polyurethane focusing at the anterior-distal part of residual limb: A case study. Sains Malaysiana, 50 (9). pp. 2713-2725. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2021-5009-18.
Mohd Jai, Nor Aina and Mat Rosly, Maziah and Abd Razak, Nasrul Anuar (2021) Physiological responses of exergaming boxing in adults: A systematic review and meta-analysis. Games for Health Journal, 10 (2). pp. 73-82. ISSN 2161-783X, DOI https://doi.org/10.1089/g4h.2020.0078.
Sobh, Khaled Nedal Mahmoud and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Investigation of EMG parameter for transtibial prosthetic user with flexion and extension of the knee and normal walking gait: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 235 (4). pp. 419-427. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411920985753.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2021) Classification and comparison of mechanical design of powered ankle-foot prostheses for transtibial amputees developed in the 21st Century: A systematic review. Journal of Medical Devices-Transactions of the ASME, 15 (1). ISSN 1932-6181, DOI https://doi.org/10.1115/1.4049437.
Hamzah, N.A. and Abd Razak, Nasrul Anuar and Ab Karim, Mohd Sayuti and Salleh, S.Z. (2021) Comparative study on the accuracy of Biosculptor’s Bioscanner system in transtibial residual limb circumference measurement. Acta of Bioengineering and Biomechanics, 23 (4). pp. 173-182. ISSN 1509409X, DOI https://doi.org/10.37190/ABB-01905-2021-05.
Hashim, Nur Afiqah and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Comparison of conventional and virtual reality box and blocks tests in upper limb amputees: A case-control study. IEEE Access, 9. pp. 76983-76990. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2021.3072988.
Lutfi, Siti Nur Nabilah and Abd Razak, Nasrul Anuar and Ali, Sadeeq and Gholizadeh, Hossein (2021) Compression and tension behavior of the prosthetic foam materials polyurethane, EVA, Pelite (TM) and a combination of polyurethane and EVA: A preliminary study. Biomedical Engineering / Biomedizinische Technik, 66 (3). pp. 317-322. ISSN 0013-5585, DOI https://doi.org/10.1515/bmt-2019-0110.
Hashim, Nur Afiqah and Abd Razak, Nasrul Anuar and Gholizadeh, Helia and Abu Osman, Noor Azuan (2021) Video game-based rehabilitation approach for individuals who have undergone upper limb amputation: Case-control study. JMIR Serious Games, 9 (1). ISSN 2291-9279, DOI https://doi.org/10.2196/17017.
Jai, Nor Aina Mohd and Mat Rosly, Maziah and Abd Razak, Nasrul Anuar (2020) Correlating Psychophysiological Responses of Exergaming Boxing for Predictive Heart Rate Regression Models in Young Adults. IEEE Transactions on Games, 12 (4). pp. 398-405. ISSN IEEE, DOI https://doi.org/10.1109/TG.2020.3039838.
Nizam, M. A. Mohamed and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan and Jaladin, R. A. Mohd (2022) Qualitative study of prosthetic liner materials on transtibial amputees’ satisfaction in term of positional pain and discomfort. In: 6th Kuala Lumpur International Conference on Biomedical Engineering, BioMed 2021.
