Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive

Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Mansor, Muhammad Safwan Mohd and Juri, Azib and Wu, Bo and Jamaludin, Mohd Fadzil and Ansari, Nooruddin and Ren, James (2024) Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive. Journal of Materials Research and Technology-JMR&T, 30. pp. 9102-9114. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.05.249.

Full text not available from this repository.
Official URL: https://doi.org/10.1016/j.jmrt.2024.05.249

Abstract

The primary issue with joining an immiscible magnesium/iron system is the lack of a bonding medium. This research used an aluminium (Al) additive as a bonding medium to facilitate the formation of an interface layer. Immiscible AZ31 magnesium alloy and SPHC low-carbon steel were successfully joined by employing aluminium (Al) powder as an additive in the gap between them with friction stir welding (FSW). The extensive interfacial microstructural analyses confirmed that the aluminium-rich Fe2Al5 intermetallic compound (IMC) formed with a range of 20-25 nm in thickness at the interface between magnesium and iron resulted from the metallurgical reaction between the Al powder additive and base SPHC steel. This IMC phase served as a transitional layer, facilitating the metallurgical bonding between Magnesium and Iron. The tensile strength of the joint was significantly improved by 43%, from 126 MPa without the additive to 180 MPa using the aluminium additive. The formation of the following well-matched interface lattice sites between Fe and Fe2Al5 region was identified: (002)Fe2Al5//(110)Fe, 110]Fe2Al5//1 13]Fe. The intermetallic Fe2Al5 was composed of nanocrystalline and amorphous interface layers. Furthermore, the fracture of the joint occurred at the interface, indicating a brittle mode of fracture behaviour.

Item Type: Article
Funders: Universiti Malaya, Fundamental Research Grant Scheme - Ministry of Higher Education, Malaysia (FP087-2023), EU H2020 project, MSCA-RISE-2018 (823786)
Uncontrolled Keywords: Mg/Steel FSW; Microstructure analysis; Intermetallic compound; Welding and joining; Al powder additive
Subjects: Q Science > Q Science (General)
T Technology > TJ Mechanical engineering and machinery
Divisions: Centre for Foundation Studies in Science
Faculty of Engineering > Department of Mechanical Engineering
Depositing User: Ms. Juhaida Abd Rahim
Date Deposited: 30 Sep 2024 07:18
Last Modified: 30 Sep 2024 07:18
URI: http://eprints.um.edu.my/id/eprint/45272

Actions (login required)

View Item View Item