Bahador, A. and Saud, S.N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M.K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288, DOI https://doi.org/10.1007/s40194-016-0375-z.
Full text not available from this repository.Abstract
A Nd:YAG laser welding technique with varying pulse widths was employed to weld Ti-27 at.% Nb shape memory alloy plates, and subsequent phase transformation characteristics and microhardness of welds were systematically investigated. From microstructure observation, it is apparent that weld seams contain a columnar growth with the low pulse and transferred into a combined growth of columnar and planar with the high pulse width. Moreover, grains in the weld zone exhibited a finer size when compared to the unwelded zone. A small amount of NbTi4 was also found in the welds. In the forward transformation, transformation temperatures did not exhibit peaks, indicating the same behaviour as the original TiNb alloy. Microhardness of the TiNb welds increased as the pulse width increased when compared to the original TiNb alloy. However, little reduction in hardness occurred after a pulse width of 5 ms.
Item Type: | Article |
---|---|
Funders: | Ministry of Higher Education of Malaysia and Universiti Teknologi Malaysia: University Research Grant No. Q.J130000.3024.00M57 |
Uncontrolled Keywords: | Titanium alloys; Shape memory alloys; Laser welding; Intermetallics; Hardness |
Subjects: | T Technology > TJ Mechanical engineering and machinery |
Divisions: | Faculty of Engineering |
Depositing User: | Ms. Juhaida Abd Rahim |
Date Deposited: | 05 Dec 2017 01:48 |
Last Modified: | 05 Dec 2017 01:48 |
URI: | http://eprints.um.edu.my/id/eprint/18434 |
Actions (login required)
View Item |